QCAD Bugtracker

  • Status Assigned
  • Percent Complete
    0%
  • Task Type Bug Report
  • Category Translation
  • Assigned To
    Andrew
  • Operating System All
  • Severity Low
  • Priority Very Low
  • Reported Version n/a
  • Due in Version Undecided
  • Due Date Undecided
  • Votes
  • Private
Attached to Project: QCAD Bugtracker
Opened by Andrew - 02.03.2012
Last edited by Andrew - 01.03.2019

FS#513 - Translation errors

If you spot an error in the translated user interface of QCAD, please add a comment to this task or submit your translation at http://translate.qcad.org.
Thank you for your help!

Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu oder geben Sie Ihre Übersetzung ein unter http://translate.qcad.org.
Vielen Dank für Ihre Hilfe!

Si vous remarquez une erreur dans l’interface utilisateur traduite de QCAD, veuillez ajouter un commentaire à cette tâche ou soumettre votre traduction à http://translate.qcad.org.
Merci pour votre aide!

Si detecta un error en la interfaz de usuario traducida de QCAD, añada un comentario a esta tarea o envíe su traducción a http://translate.qcad.org.
Gracias por tu ayuda!

Se si rileva un errore nell’interfaccia utente tradotta di QCAD, si prega di aggiungere un commento a questo compito o di inviare la traduzione a http://translate.qcad.org.
Obrigado por sua ajuda!

Se você detectar um erro na interface de usuário traduzida do QCAD, adicione um comentário a esta tarefa ou envie sua tradução para http://translate.qcad.org.
Obrigado pela sua ajuda!

Als u een fout ziet in de vertaalde gebruikersinterface van QCAD, voeg dan een opmerking toe aan deze taak of stuur uw vertaling naar http://translate.qcad.org.
Bedankt voor uw hulp!

Nomen Nescio commented on 21.06.2013 19:00

German translation:

"Bemaßung" is written with "ß" instead of "ss".

BTW, this may be useful: dict.leo.org

Admin
Andrew commented on 21.06.2013 19:47

Thanks Nomen. QCAD uses the Swiss German spelling rules (we don't use the German ß in Switzerland).

Xavier Beà commented on 08.07.2013 16:20

Spanish Translation:
"Close Sequence" must be "Cierra la secuencia" and not "Cerca de la secuencia"

Admin
Andrew commented on 08.07.2013 16:41

Thanks Xavier. This has been fixed for the next release.
Please let me know if you spot any other errors. The Spanish translation is based on an automatic translation, so it is likely to contain more errors.

Alessandro Bottoni commented on 29.11.2014 10:14

Italian translation

The original english sequence:
main menu → draw → text → special characters → others - character map

is translated as:
menu → disegna → testo → caratteri speciali → altri → mappa del PERSONAGGIO

while it should be:
menu → disegna → testo → caratteri speciali → altri → mappa DEI CARATTERI

Because the english term "character" can be translated in italian both as "carattere" (that can be both the personality of a human being AND a typographal typeface) and "personaggio" (that is ONLY a character of a novel, a theatrical show, a film, and so on). In this specific case, the correct italian translation is "carattere". More precisely, it should be translated with the plural form "caratteri" (that is: "mappa dei caratteri").

Admin
Andrew commented on 29.11.2014 10:18

Thanks Alessandro! I will fix that for QCAD 3.7.5.
Please let me know if you spot any other error / inconsistencies. Thanks.

Christian HOSTELET commented on 28.10.2015 06:10

Hello/Bonjour,

French translation:

Under "Divers" in main menu, all submenus are still written in English. (QCAD version 3.11.3.0 dated Oct 14 2015)

Admin
Andrew commented on 28.10.2015 08:31
Under "Divers" in main menu, all submenus are still written in English. (QCAD version 3.11.3.0 dated Oct 14 2015)

Yes, The 'Misc' menu is for various tools and is only available in English at this point (i.e. not translated).

AlexL commented on 25.11.2015 16:12

Please mark as translatable: "Color:", "Handle:", "Continuous"

AlexL commented on 02.12.2015 19:45

Please mark as translatable: "Handle:", "&Import XML", "&Export XML", "Version:".

Admin
Andrew commented on 03.12.2015 10:39

AlexL: this should be fixed. C++ sources need to be updated from https://github.com/qcad/qcad

Matthias Seidel commented on 04.09.2016 13:36

German translation:

Under "Applikationseinstellungen", "Widgets: Eigenschaften Editor" it should be also "aktuellen" instead of "aktuallen" in the second place.

Admin
Andrew commented on 05.09.2016 06:16

Thanks.

Christian Gonzalez commented on 29.08.2017 19:32

In the welcome screen (first time run), when using German as language, the background color is switchable between "schwarz" (black) and "weiss" (white). In German you write "weiß", not "weiss".

Christian Gonzalez commented on 29.08.2017 19:34

On the website/manual: http://www.qcad.org/doc/qcad/3.17.3/reference/de/index.html there is "schliessen" in the left sidebar. This should be "schließen" too. I suppose there are many "ss ↔ ß" errors in QCad.

Admin
Andrew commented on 29.08.2017 20:02

I can confirm that QCAD does not use the German Doppel-s. We're using the Swiss spelling.

Brice Coustillas commented on 31.12.2017 12:19

Premier regard d'un nouveau venu, citation:


Merci d'essayer QCAD Professional.
Cette version d'essai vous permet d'essayer QCAD Professional avant de décider si vous voulez l'acheter. Il n'est pas destiné à un usage productif.
(…)
Avec votre achat, vous supportez le développement futur de QCAD.


Pourtant, il est dit justement ailleurs (panneau d'accompagnement de la version d'essai): «Avec votre achat, vous soutenez le développement futur de QCAD Professional.»

Étrange volonté que celle d'assurer la rectitude des textes de cette application… L'entreprise est ardue, par les temps qui courent!

C'est une aspiration louable qu'il faudrait rendre crédible par l'orientation d'un linguiste «dur». Ainsi: Quid des anglicismes? Comment fait-on pour déclarer qu'on utilise ici le français «suisse»? Quant au double s en lieu et place du ß allemand, est-on certain de vouloir s'accrocher à un régionalisme qui fait sourire les Allemands, clients pressentis (sans compter que ß renvoie historiquement à sz et non à ss)? Quid des traductions littérales du genre «s'il vous plaît achetez (…)» au lieu de «Veuillez acheter (…)», voire d'inepties telles que «Cette version d’essai vous permet d’essayer QCAD Professional avant de décider si vous voulez l’acheter. Il n’est pas destiné à un usage productif.»

Cela dit, l'application elle-même semble sérieuse prima facie. Je vais suivre en conséquence, acceptant tout débat raisonnable.

Brice Coustillas commented on 31.12.2017 12:26

Et, pendant que je suis à l'ouvrage… vu sur le site

http://www.qcad.org/de/qcad-book:

Das ofizielle QCAD Buch

Pas de discussion possible, ici: un simple f n'en remplace pas deux, surtout dans une page de cette importance en matière de promotion.

Admin
Andrew commented on 01.01.2018 16:31

Brice: thanks for your feedback. I'm not sure I understood all of it (I'm using an online translator for French → English).
Indeed, most French texts in QCAD have been translated using such an online translator. Eventually these might be reviewed by a human if resources allow for it. Same for German ss.

Brice Coustillas commented on 16.01.2018 18:15

Hello, Andrew,

I think you should forget about on-line translation software —and off-line one as well.

Let me know if resources for human (i.e. 'real') translation flow in: I used to be an international consultant (linguistics — French) to the UN, and I sport very deep knowledge of software architecture and coding.

Cheers,

B

Xabel commented on 19.02.2019 19:29

Hola,

Espero que este aviso de errores de traducción al español de España esté bien hecho. En mi opinión los siguientes elementos del menú de la aplicación deben ser corregidos, unos por ortografía, otros por concepto y otros por mantener la coherencia con el resto del menú o simples"erratas":

  1. Menú Editar > Pegado a lo largo de la entidad (PE) ⇒ Pegar a lo largo de la entidad (PE).
  2. Menú Editar > Modificación rápida > Moverse hacia abajo ⇒ Mover hacia abajo
  3. Menú Editar > Modificación rápida > Rotar contador dirección reloj (F5) ⇒ Rotar a la izquierda (F5)
  4. Menú Editar > Modificación rápida > Girar a la derecha (F6) ⇒ Rotar a la derecha (F6)
  5. Menú Ver < Proyección derecho (JR) ⇒ Proyección derecha (JR)
  6. Menú > Dibujar > Arco > Centro, Punto, Angulo (AR) ⇒ Centro, punto y ángulo (AR)
  7. Menú > Dibujar > Arco > Tangente, punto, radio (AT) ⇒ Tangente, punto y radio (AT)
  8. Menú > Dibujar > Círculo > Centro, point (CI) ⇒ Centro y punto (CI)
  9. Menú > Dibujar > Círculo > Centro, radio (CR) ⇒ Centro y radio (CR)
  10. Menú > Dibujar > Círculo > Centro, diámetro (CA) ⇒ Centro y diámetro (CA)
  11. Menú > Dibujar > Círculo > Tangente, punto, radio (CTP) ⇒ Tangente, punto y radio (CTP)
  12. Menú > Dimensión > Alineado (DA) ⇒ Alineada (DA)
  13. Menú > Dimensión > Girada (lineal) (DL) ⇒ Rotada (lineal) (DL)
  14. Menú > Dimensión > Continuar (DC) ⇒ Continua (DC)
  15. Menú > Dimensión > Ordinal (X/Y) (DO) ⇒ Coordenadas (X/Y) (DO)
  16. Menú > Dimensión > Radial (DR) ⇒ Radio (DR)
  17. Menú > Dimensión > Diametro (DD) ⇒ Diámetro (DR)
  18. Menú > Dimensión > Angular (DN) ⇒ Ángulo (DN)

Saludos

Xabel

Admin
Andrew commented on 23.02.2019 10:18

Thanks, I've corrected these.

You can also view, submit or suggest translations at:
http://translate.qcad.org/languages/es/

Husky commented on 04.11.2019 22:55

QCAD Pro 3.23.0.5, deutsche Benutzeroberfläche:

Unter:

Menü Bearbeiten:
Rückgängig [Change dokument Setting]

Wiederherstellen [-]

Menü / Hilfe / Referenzhandbuch
QCAD Benutzerreferenz (Verschiedene Bezeichnungen!)

Bearbeiten
Rückgängig [-] (00)

Wiederherstellen [-] (UU)

Gabriele commented on 04.05.2020 20:14

Versione:
3.24.3.0 (3.24.3)

ITALIAN

Menù –> Aiuto –> Foro

changing in

Menù –> Aiuto –> Forum

Admin
Andrew commented on 04.05.2020 20:24

Gabriele: thanks!

Jose Vieira Vasconcellos commented on 27.01.2022 23:20

Olá Andrew!

In English:
Edit → Drawing Preferences → Drawing Unit → Meter

In Portuguese:
Editar → Preferencias de Desenho → Unidade de Desenho → Medidor

please, change "Medidor" to "Metro".

Grato desde já,
J. Vieira

Loading...

Available keyboard shortcuts

Tasklist

Task Details

Task Editing