QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

ID  descCategoryTask TypeSeveritySummaryStatusProgress
1090QCAD (main)Feature RequestLowExport only selected layers to SVG and/or export each l...Assigned
0%
2 Task Description

When exporting to SVG it would be helpful if there was a selection of layers to export.
E.g. when selecting only layer A in the SVG export dialog, only the objects located/displayed on layer A would be exported to SVG.

As an alternative or additional export feature, there could be an option to export each (non-empty) layer to a separate SVG in one step.
The layer names could be used as (part of the) default file names during the export.
E.g. Layer A of file XYZ would be exported to “XYZ_A.SVG” while layer B would be exported to “XYZ_B.SVG” etc.

1087QCAD (main)Bug ReportLowRuler ticks are not corresponding to the grid pointsAssigned
0%
1 Task Description

Ruler ticks are not corresponding to the grid points,
Ruler will completely disappear at a certain zoom level,

Settings:
Drawing unit: inch,
Grid settings: Grid 1, Meta Grid 12,
Dim Label Format: “Engineering, 0’-0.0”

see topic below:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014

1080QCAD (main)Feature RequestLowBitmap export: calculate size based on bounding box inc...Assigned
0%
Task Description

I have created a drawing, where the CENTERS of the most outer lines have a distance of 3.06mm in both X and Y.
The line weight of these outer lines is 0.6mm, so the whole image is 3.06mm + 2* 0.6mm/2 = 3.12mm wide and long (center to center plus half of the line weight on every side).
Additionally in the export there is a frame around the image, making it 3.12 + 2*frame.
The export function however calculates 3.06mm when setting the resolution to 1000Pix/cm, so it does not include the line weights and the outer frame.

1067QCAD (main)Feature RequestLowFilling an area with a bitmapAssigned
0%
1 Task Description

Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.

1051QCAD (main)Feature RequestLowInfo tool, polygonal area, possibility for a postfix la...Assigned
0%
1 Task Description

... would be nice.

If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².

I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ... ;-)

1046QCAD (main)Feature RequestLowPlease add script bindings for Qt 4.8.6 and 5.2.1Assigned
0%
Task Description

These are the versions Ubuntu 14.04 comes with, and since it’s an LTS version, it will linger around a while.

(Despite the fact that the Qt4 packages are versioned 4.8.5, qmake –version says 4.8.6, so it doesn’t find the 4.8.5 bindings.)

Thanks,

1044QCAD (main)Feature RequestLowRadian measure symbol for Geometry labeling ...Assigned
0%
2 Task Description

We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...

It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.

1036QCAD (main)Feature RequestLowLayer list - drop down menu optionAssigned
0%
Task Description

In the same way as the Pen tool has a drop down menu, would it be possible to have an option to configure the layer list in the same way. I am trying to create a bit more drawing space and it would be good if I could dock the layer list in the top of my window and only take up a single row space!

1034QCAD (main)Feature RequestLowSupplementary note added to Application preferences dia...Assigned
0%
Task Description

I think it would be useful to add a note to the Application preferences dialog window, to explain to the user the difference between ‘Application and Drawing’ preferences and how it effects drawings in QCAD.

Please see topic for more details and feedback:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2831&p=9724#p9724

1027QCAD (main)Feature RequestLowRectangle with a 3 point determination ...Assigned
0%
1 Task Description

Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.

We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.

My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.

1. First point: start

2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle

3. third point: determination second side (height?)

I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...

1026QCAD (main)Feature RequestLowSelection Filter also present in the Menu "Selection"Assigned
0%
Task Description

It would be nice to have the Selection Filter also present in the Menu / Selection List

1023QCAD (main)Feature RequestLowArrange points on a plan according to variation of dist...Assigned
0%
2 Task Description

Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances

1009QCAD (main)Feature RequestLowLayer Order is Alphabetical vs the Order Defined Origin...Assigned
0%
Task Description

It would appear that when QCAD imports a DXF, it reorders the layers into alphabetical order (at least when importing R2011). I have not tested this extensively but on other programs, the order is different from alphabetical. Ideally the operator should be given a choice to order the layers as exported (assuming the DXF format remembers that) or alphabetical. This is because a drawing may have a certain stack up of layers (like a printed circuit board) and then alphabetic ordering is not useful nor desired.

1008QCAD (main)Bug ReportLowDXF (dxflib) compat issuesAssigned
0%
Task Description

Git head as well as 3.4.5 (trial), both with dxflib 3.3.4.0.

Start up QCAD, (with existing or new configuration, doesn’t seem to matter), “Save as” the completely empty drawing, choose “R15 (dxflib)” on Pro (only this one is available on community), save drawing.

Fire up AutoCAD 2000, try to load the empty drawing just saved.

Result:

DXF read error
Error in APPID Table
DXF read error on line 941.
Invalid or incomplete DXF input -- drawing discarded.

Problem not present when a completely empty drawing saved using Teigha in R15 format is opened (ie. it just results in an empty drawing in AutoCAD 2000). Problem is also not present when saving an existing drawing with Pro (trial) with Teigha and opening it in AutoCAD 2000. Problem does present when trying to open a dxflib-saved drawing in AutoCAD 2000.

Empty drawings created with both dxflib 3.3.4.0 in QCAD Pro 3.4.5 trial and Teigha whatever in QCAD Pro trial 3.4.5 are attached. (Community Git 135fd0 is identical to Pro - same dxflib version.)

1005QCAD (main)Feature RequestLowMaking use of mouse buttons configurableAssigned
0%
Task Description

According to the help, one requires a middle mouse to pan. Since few standard mice have middle buttons, this is a poor choice for this all important function. The default should be the right mouse button when ever the mouse is placed in an open area with nothing else to select. That way right click can still be used to invoke a pop down menu when ever the mouse is placed over an object that might have a need for pop down menu options. Additionally, the Pan mouse key should be alterable and selectable from a Preferences option, since if one does have a three button mouse, we should not prevent a user from employing this hardware if they have it. The same might be said for all mouse buttons to allow the user to configure the mouse operation to that which is most comfortable and efficient for their tasks.

995QCAD (main)Feature RequestLowProperty editor: add 'edit block' buttonAssigned
0%
1 Task Description

Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.

992QCAD (main)Feature RequestLowselections to stay selected when projecting to an isome...Assigned
0%
Task Description

My request is that all selected entities stay selected after isometric projection, this would be useful for example if you need to modify the projection further after placing!
Maybe an extra button could be added in the ISO options?

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
1 Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

990QCAD (main)Feature RequestLowDefault Names for Custom Property ...Assigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

It would be nice to have in “Application preferences” the possibility to predefine a couple Custom Property Names.
Right now I use the Custom Property function to add a DIN and the Material info to every Block. This project has a lot of DIN parts and I have to type again and again the names DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... you got my point ;-)

If I have predefined Names - I have just to fill out the value :-)

986QCAD (main)Feature RequestLowDetect duplicates - only on selected areaAssigned
0%
1 Task Description

It would be useful to have an additional option to only detect duplicates on user defined selection of drawing.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145

980QCAD (main)Bug ReportLowIsometric Projection / blocks / wrong layer are used in...Assigned
0%
Task Description

Isometric Projection used on a selection which contains blocks will mix up the layer affiliations.
No blocks - no problems ;-)

979QCAD (main)Feature RequestLowText dialog: insert special characters in simple text m...Assigned
0%
1 Task Description

The Omega button to insert special characters is only available in rich text mode.
Make it available in simple text mode as well.

976dxflibBug ReportLowDXF import errors related to hatches, textsAssigned
0%
Task Description

See:
http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677

972QCAD (main)Feature RequestLowDistribute equally option ...Assigned
0%
6 Task Description

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

964QCAD (main)Feature RequestLowNew tool request - 'Break Out Arc' from CircleAssigned
0%
Task Description

It would be useful to be able to pick a Start and End point of an Arc within a Circle to then break this out. So in principle another break out tool.

Please see topic:http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8826#p8826

962QCAD (main)Feature RequestLowDefault save / open directoriesAssigned
0%
1 Task Description

Add the option to use a fixed path for the save to, open and CAM export directories.

(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)

952QCAD (main)Feature RequestLowDimensions: manually control arrow positionAssigned
0%
3 Task Description

See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.

The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.

951QCAD (main)Feature RequestLowExtra Option for Block attributes ...Assigned
0%
1 Task Description

It would be nice to have the possibility to control the automatic Text orientation in Block attributes.
Something what would work like the DIM restriction: I can read the text horizontal and/or from the right side of the drawing sheet.

Right now I have the feeling that the Text orientation is dependent on the tool what I even use.
Different tools = different outcomes.

948QCAD (main)Bug ReportLowmainwindow example segfaultsAssigned
0%
Task Description

As far as I can tell, it never worked.

#0  0x0000000000490527 in QFormInternal::domPropertyToVariant ()
No symbol table info available.
#1  0x000000000042aea9 in QFormInternal::QAbstractFormBuilder::toVariant ()
No symbol table info available.
#2  0x00000000004498a6 in QFormInternal::QFormBuilder::applyProperties ()
No symbol table info available.
#3  0x000000000042475f in QFormInternal::FormBuilderPrivate::applyProperties ()
No symbol table info available.
#4  0x000000000042e83b in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#5  0x00000000004493c0 in QFormInternal::QFormBuilder::create ()
No symbol table info available.
#6  0x000000000042182e in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#7  0x000000000042fa37 in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#8  0x00000000004225a2 in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#9  0x0000000815eed3d7 in QFormInternal::QAbstractFormBuilder::load ()
   from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#10 0x0000000815ededad in QUiLoader::load () from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#11 0x0000000815eda326 in qtscript_QUiLoader_prototype_call (context=0x813262240)
    at ../../generated_cpp/com_trolltech_qt_uitools/qtscript_QUiLoader.cpp:282
        _q_arg0 = (QIODevice *) 0x813fe5610
        _q_arg1 = (QWidget *) 0x813ffdcd0
        _q_result = (QWidget *) 0x8006e2c00
        _id = <value optimized out>
        _q_self = (QUiLoader *) 0x813f08d40
#12 0x0000000805fc9f78 in QScript::FunctionWrapper::proxyCall () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#13 0x0000000805ee418f in QTJSC::NativeFuncWrapper::operator() () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#14 0x0000000805eb93ee in QTJSC::Interpreter::privateExecute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#15 0x0000000805ec1ccd in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#16 0x0000000805ec1ff9 in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#17 0x0000000805fa9743 in QScriptEnginePrivate::evaluateHelper () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#18 0x0000000805faabc6 in QScriptEngine::evaluate () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#19 0x0000000800ac5aae in RScriptHandlerEcma::eval (this=0x811f435e0, script=<value optimized out>, 
    fileName=<value optimized out>) at RScriptHandlerEcma.cpp:855
        err = {d_ptr = {d = 0x7fffffffcf50}}
#20 0x0000000800ac65c5 in RScriptHandlerEcma::doScript (this=0x811f435e0, scriptFile=@0x7fffffffd2f0, 
    arguments=<value optimized out>) at RScriptHandlerEcma.cpp:851
        fi = {d_ptr = {d = 0x813f94700}}
        globalObject = {d_ptr = {d = 0x813ff1240}}
        contents = {static null = {<No data fields>}, static shared_null = {ref = {_q_value = 3936}, alloc = 0, size = 0, 
    data = 0x809bb387a, clean = 0, simpletext = 0, righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}}, 
  static shared_empty = {ref = {_q_value = 19}, alloc = 0, size = 0, data = 0x809bb389a, clean = 0, simpletext = 0, 
    righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}}, d = 0x811c11800, static codecForCStrings = 0x0}
#21 0x0000000000417d13 in MainWindow (this=0x7fffffffd4b0, parent=<value optimized out>) at MainWindow.cpp:99
No locals.
#22 0x0000000000416ad9 in main (argc=1, argv=<value optimized out>) at main.cpp:35
        app = <value optimized out>
        window = {<QMainWindow> = {<QWidget> = {<QObject> = {_vptr$QObject = 0x4992b0, static staticMetaObject = {d = {
            superdata = 0x0, stringdata = 0x809933ae0 "QObject", data = 0x809933b80, extradata = 0x809ba94c0}}, 
        static staticMetaObjectExtraData = {objects = 0x0, 
          static_metacall = 0x80985cd80 <QObject::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}, d_ptr = {
          d = 0x811d28600}, static staticQtMetaObject = {d = {superdata = 0x0, stringdata = 0x80993cc40 "Qt", 
            data = 0x809940560, extradata = 0x0}}}, <QPaintDevice> = {_vptr$QPaintDevice = 0x499478, painters = 0}, 
      static staticMetaObject = {d = {superdata = 0x809ba94e0, stringdata = 0x808e66be0 "QWidget", data = 0x808e670c0, 
          extradata = 0x809282360}}, static staticMetaObjectExtraData = {objects = 0x0, 
        static_metacall = 0x8087899a0 <QWidget::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}, 
      data = 0x811d28748}, static staticMetaObject = {d = {superdata = 0x809282380, stringdata = 0x808ec04c0 "QMainWindow", 
        data = 0x808ec0660, extradata = 0x8092abc60}}, static staticMetaObjectExtraData = {objects = 0x8092d1880, 
      static_metacall = 0x808e5aaf0 <QMainWindow::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}}, 
  documentInterface = 0x811d31600}
        ret = <value optimized out>
936QCAD (main)Feature RequestLowDisproportional scaling of block referencesAssigned
0%
Task Description

XP/32

... doesn’t works proper at circles and ellipses.

Circles: the scale works only proportional even though I have the options for x and y.
Ellipses: The same but if I play around with the x, y fields it will freeze the scale possibility.

927QCAD (main)Feature RequestLowFurther options for the 'Add Measurement' toolsAssigned
0%
2 Task Description

Absolutely love the new options for adding the measurements in the current drawing.

I would like to see an additional option for only adding the text and not the lines also, maybe a simple check box would suffice here.

Of course at the moment I am able to use the property editor to select only the lines and move to a new layer and hide!

923QCAD (main)Feature RequestLowDiagramming (Intelligent Orthogonal Connectors)Assigned
0%
2 Task Description

Hi,

With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.

922QCAD (main)Feature RequestLowPossibility to control the order in the Property editor...Assigned
0%
1 Task Description

It would be nice and helpful if we had the possibility to control the order of Attributes - shown in the property editor.
I found a solution for myself with using numbers in the Attribute definition tag - but that isn’t really a nice solution.
If I could hide my numbering ... everything would be fine for me .... ;-)

908QCAD (main)Feature RequestLowLibrary Browser Block Delete FunctionAssigned
0%
2 Task Description

It would be very helpful if the library browser had a delete function.

I know that this can be very risky for some people, but it is the easiest
way to see clearly what you delete.

Regards
Henry

901QCAD (main)Feature RequestLowDimension text stylesAssigned
0%
Task Description

Support custom dimension text styles for imported DXF / DWG files.

895QCAD (main)Feature RequestLowArea calculation based on existing entitiesAssigned
0%
4 Task Description

Use case:

  • Start tool
  • Choose one entity of the contour
  • If contour is closed, area of closed contour is calculated an printed in the command line history
  • Configuration parameters: segment length for arc interpolation
894QCAD (main)Feature RequestLowModify - Clip to Rectangle: copy area to clipboardAssigned
0%
2 Task Description

New mode for clip to rectangle: copy contents of rectangular area to clipboard.

893QCAD (main)Bug ReportLowLibrary Browser - Edit Library Item - opens drawings al...Assigned
0%
Task Description

Library Browser - Edit Library Item - opens drawings always with grid.

- If I switch between opened drawings back and forth the grid will disappear ....
- If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....

Just Cosmetic ... ;-)

879QCAD (main)Bug ReportLowAutosave function not working if file is opened directl...Assigned
0%
1 Task Description

If a file is opened by clicking on it in an open ZIP archive, autosave will not work.

Linux Mint -64

Autosave function not working, error warning given instead!

873QCAD (main)Feature RequestLowcommand line does not accept distance value for funtion...Assigned
0%
Task Description

In the comnmand line, I can sucessfully enter for example the radius of a circle to draw (Space 100 Enter) but the command line does not accept a value for the distance when drawing parallel lines (l p space 100 enter → error).

868QCAD (main)Feature RequestLowOption to save to dwt - drawing template.Assigned
0%
Task Description

An option to save to dwt (drawing template) would be so very useful.
Please see related topic:

http://www.qcad.org/rsforum/viewtopic.php?f=32&p=8237#p8237

866QCAD (main)Feature RequestLowPaste block reference: add third option to rename paste...Assigned
0%
1 Task Description

Scenario:

Drawing 1: Blockname X is part of a selection, I copy this selection into the clipboard to use it in an other drawing.

Switch to Drawing 2, this drawing has also a Blockname X but with a different content.

Use the clipboard paste function - the clipboard content will be modified (only the Block) by the drawing 2 block content.

No warning pops up - it just happens!

864QCAD (main)Bug ReportLowTemplate Preview/Info doesn't shows the sheet orientati...Assigned
0%
1 Task Description

“Create New Drawing from Template” Browser can’t readout the Page orientation ...

860QCAD (main)Feature RequestLow"Create Library item from selection" default Path ...Assigned
0%
Task Description

Default Path for “Create Library item from selection” / “Save us” is C:\Programme\QCAD pro 3.1.6 ...
... regardless of the settings in the “Application Preferences / Library Browser / for Library Sources.
And QCAD doesn’t remember the last path choice ....

If I have to save 50 Library Items I have to navigate 50 times thru my system to find - the same place.

It would be nice if QCAD would point in first place to the Library Source or, at least, remember the last used path ... ;-)

859QCAD (main)Feature RequestLowPersistent selection button added to tool set.Assigned
0%
1 Task Description

It would be useful to have a persistent selection button added to the ‘selection’ tool set.

This would allow the user to set persistent selection as and when needed for the current drawing one is working on, rather than going the long route through the ‘Application’ preferences dialog.

853QCAD (main)Feature RequestLowKeep selection after undo ...Assigned
0%
2 Task Description

If I move something and it went wrong I can easily undo the last move and start over without the need of a re-selection.
If I copy something and it went wrong I can undo the last copy but I have to re-select everything again.

It would be nice to keep the once chosen selection in both “undo” situation!

Same with similar functions like rotate etc. ....

849QCAD (main)Feature RequestLowMake maximum visible reference points of selection conf...Assigned
0%
1 Task Description

Provide configuration option to raise / lower maximum reference points that are shown for selected entities (currently fixed to 1000).

Original report:

Imported a spline-dxf from adobe illustrator. Converted the spline to polyline with explode command. Then no anchor points / vertex points / vertices were showing anymore. Simplified the polyline so that it had less than 1000 points. Vertices became visible.

I think some freeform objects need actually more than 1000 vertices. Also them need to be edited. Please increase the amount of vertices showing to biginteger

regards

Benjamin

839QCAD (main)Feature RequestLowGrid / Meta Grid info + Drawing Unit Info ...Assigned
0%
1 Task Description

At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings.
It would be nice to have additional the Info for the drawing unit ...

836QCAD (main)Feature RequestLowMerge different Offset tools into just twoAssigned
0%
Task Description

Merge Parallel Line(with distance), Concentric Arc(with distance), Concentric Circle(with distance) and Offset(Polyline) into one generic Offset with distance tool that if possible also works for ellipses and splines.

Do the same for the “through point” tools so that there also is just one Offset through point tool.

The Offset tools could be located with the Modification tools.

833QCAD (main)Feature RequestLowMove number of copies into Options toolbarAssigned
0%
Task Description

The Number of Copies (Delete Original, Keep Original, Multiple Copies) and whether to use the current layers attributes should be found in the Options toolbar of the active tool.

This way the option would be set before or during the operation (preview?)the popup window afterwards would be obsolete.

Showing tasks 351 - 400 of 512 Page 8 of 11<<First - 6 - 7 - 8 - 9 - 10 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing