QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
 352 QCAD (main)Bug ReportLow Info Tool, Polygonal Area shows decimal units instead o ...Closed
100%
Task Description

Drawing preferences / dimension = Fraction

Info Tool, Polygonal Area shows decimal units instead of fractions.

 353 QCAD (main)Bug ReportLow Relative Angle / Line Orthogonal caused malfunction in  ...Closed
100%
Task Description

After using Line “Relative Angle” or “Line Orthogonal” the Toolbar is in a loop without showing all the Cad tools such as “Modify” “Hatch” etc..
Escape switch only between the “Lines Menu” and the “Select Menu”. To get all Cad Tools back you have to restart QCad.

 354 QCAD (main)Bug ReportLow Property Editor / Select Layer Malfunction Closed
100%
Task Description

RC1b
To change the postfix for dimension.
Situation: New drawing, Dimension in Drawing, Dimension on one Layer. Menu > Select > Select Layer and click on a dimension. Went to Property Editor > Geometry > Label and change the Label in <>”. Nothing happens.

The same procedure with a other kind of selection works and it works also in the 2.2.2.0

 363 QCAD (main)Bug ReportLow Modify tool "Stretch" only one time ... Closed
100%
Task Description

3.0 RC1

The Stretch Tool works only for one task and than you have to reselect it again for the next task.
Who really works with the stretch tool has to use it (often) a couple times consecutively to get the job done.

It was nice working in 2.2.2.0

 369 QCAD (main)Bug ReportMedium "Edit Text" Function fails ... Closed
100%
Task Description

3 RC1b

Trying to edit a Text calls the Qt Script Debugger with following Message:

Uncaught exception at C:/Programme/QCAD 3rc1b/scripts/Draw/Text\TextDialog/TextDialog.js:170: ReferenceError: Can’t find variable: simpleText
170 simpleText.checked = textDataIn.isSimple();

I’m able to close the Script Debugger but I can’t edit the Text ....

 389 QCAD (main)Bug ReportMedium Changes in "Shortcuts and Commands" are not storable... Closed
100%
Task Description

You can’t save changes in “Application Preferences > Shortcuts and Commands”!
It works only for the current session - after a restart the settings are back on default

 473 QCAD (main)Bug ReportLow Move, restricted horizontal, intersection .... Closed
100%
Task Description

Move/Copy doesn’t work with the combination restricted horizontal and snap to intersection manually.

 479 QCAD (main)Bug ReportLow Fehler in der Textfunktion Closed
100%
Task Description

Textfuntion:

Rufe ich die Funktion “Text” auf und schreibe einen Text wird dieser unwiderruflich gelöscht bzw. durch einen vorherigen Text ersetzt wenn ich danach etwas im “Main Font” verändere.
“Text Geometry” und “Alignment” funktioniert.

 492 QCAD (main)Bug ReportLow Snap to intersection manual in block references Closed
100%
Task Description

Wenn ich versuche einen Block zu verschieben mit dem Ziel “Intersection manual” wird nicht die im Block ausgewählte Linie benutzt sondern alle im Block befindlichen Linien die eine “Intersection manual” ermöglichen würden.

Auch die visuelle Auswahlerleichterung einer Linie (Farbe ändert sich beim drüberfahren mit der Maus) wird im Block nicht unterstützt :(

 542 QCAD (main)Bug ReportLow Snap > Restrict horizontal cannot be applied to Snap >  ...Closed
100%
Task Description

Vorgabe: Kreis der verschoben werden soll auf einen Punkt zwischen zwei Vertikale Linien.

Auswahl des Kreises,
Funktion Verschieben/Kopieren,
Referenzpunkt = Mitte Kreis,
Zielpunkt Middle Manuel,
Erster Punkt = Center 1. vertikale Linie,
Zweiter Punkt restricted Horizontal zum ersten Punkt,
QCad benutzt nun fälschlicher Weise den Referenzpunkt des Kreises anstatt den Center der bereits gewählten 1. vertikalen Linie ....

 543 QCAD (main)Bug ReportLow Unit Konvertierung bei Blocks funktioniert nicht ... Closed
100%
Task Description

Wenn ich eine Zeichnung in mm als Grundlage benutze um über die Zwischenablage etwas in eine Inch Zeichnung zu übernehmen wird alles Maßstäblich in Inch konvertiert.
Sehr schön ;-)

Wenn ich aber einen Block der in einer mm Zeichnung erstellt wurde über die Zwischenablage in eine Inch Zeichnung kopiere wird die Kopie als solches in der Zeichnung auch wieder in Inch konvertiert - der Block wird aber abgelegt in 1mm = 1” und kann unbearbeitet nicht weiterverwendet werden.
Nicht schön :-(

Natürlich kann man jetzt fragen: Wer braucht solch einen Blödsinn? Antwort: Amerikaner! In den USA wird blödsinniger weise gemixt ..... :-(

 553 QCAD (main)Bug ReportLow Auswahlbox ignoriert bestimmte Bemaßungen mit geänderte ...Closed
100%
Task Description

Ziehe ich mit der Maus eine normale Auswahlbox wird bestimmte (nicht alle) Bemaßungen ignoriert welche geänderte Label haben. In meinem Fall z.B. <>” (reality check)

 557 QCAD (main)Bug ReportLow In Blöcken kann am Kreis kein Reference Punkt als Fang  ...Closed
100%
Task Description

In Blöcken kann am Kreis kein Reference Punkt als Fang benutzt werden. Alle anderen Punktbestimmungen scheinen zu funktionieren.

 597 QCAD (main)Bug ReportLow Rechteck, Referenspunkt nicht mehr wählbar in kombinati ...Closed
100%
Task Description

Will ich ein Rechteck mit Größenvorgabe zeichnen und kombiniere dies mit einem versetzten Relative Zero Punkt kann ich nicht mehr den Referenzpunkt (unten Links etc.) wählen und in der Vorschau sehen. Gezeichnet wird es richtig - wenn ich den Vorgang abschließen kann!

Fallbeispiel:
Rechteck mit Größe,
verändern Relativ Zero,
Ende eines anderen Elementes,
Relativ X,Y,
Will ich dann den Referenzpunktes des Rechtecks verändern - hat QCad Probleme dies umzusetzen oder auch den Vorgang dann flüssig durchzuführen.

 627 QCAD (main)Bug ReportLow Text: Falsche Info beim editieren der Formatierung ... Closed
100%
Task Description

Grundsätzlich finde ich die Optionsauswahl beim erstellen oder editieren eines Textes im “Text Option Window” als sehr Komfortable.

Trotzdem gibt es hier für mich noch einige Ungereimtheiten die ich als Bug bezeichnen würde da es untypische Informationen liefert und verwirrt.

QCad, English, XP, Text Optionen Window:
Im linken Bereich gibt es den sogenannten “Main Font”. Dieser kann aber nicht unter Application/Drawing preferences vorgegeben werden, richtig? Hier würde ich mir wünschen das ich diesen vorgeben kann und es somit ein “Default Font” wäre. Für Bemaßungen benutze ich z.B. eine Vorgabe von 0.137795276 inch (= Deutsche DIN 3.5mm für Texthöhen) und bin Heilfroh das ich dies als Default vorgeben kann ;)

Im rechten Bereich des Text Options Windows kann ich im “Rich Text” Tab den Text formatieren - grundsätzlich eine schöne Sache.
Leider verwirrt mich dieses Fenster immer wieder:
Fallbeispiel:
Text erstellt, individuell formatiert(Textfonts, Höhe, Farbe), positioniert in der aktuelle Zeichnung.
Doppelklicke ich den Text um ihn zu editieren poppt das Optionsfenster auf und der Text ist markiert. Im Text font wird mir gesagt das es der Text Arial ist mit einer Höhe von 1 und schwarz. Da ich aber NICHT Arial verwendet habe und die Texthöhen unterschiedlich sind und alles in rot ist dies eine falsche Information.
Hier hätte ich erwartet: Font = *VARIES*, Höhe = *VARIES*, Farbe = *VARIES*. Klicke ich dann mit der Maus in den Text (Markierung verschwindet, Cursor blinkt im Text) habe ich immer noch die selbe Info - erst ein zweiter Klick spuckt dann die richtige Info aus.

Zurück zum Main Font: Wie nutze ich diesen wenn ich bereits andere Formatierungen verwendet habe - neu eingeben? Gutes Gedächtnis vorausgesetzt ;-) Spaß bei Seite: Sollte dies nicht eine Vorgabe sein die “auf Knopfdruck” verwendet werden kann?

Und da ich neugierig bin .... wofür ist die Option “Simple Text”?

 715 QCAD (main)Bug ReportLow Tangent Warning Messages are wrong ... Closed
100%
Task Description

Task:
I like to draw a line tangent between two circle.

I choose the line/tangent tool - click the first circle - get a Warning Message: “No tangent possible” confirm the Message with the OK Button.
Choose the second circle - get again a Warning Message: “No tangent possible” confirm also this Message with the OK Button.

Result: A line tangent between two circle ......

 717 QCAD (main)Bug ReportLow Create Library Item from selection doesn't takes the ch ...Closed
100%
Task Description

Tool “Create Library Item from selection” doesn’t takes the chosen Reference point ....

It seems that QCAD takes something around the absolute Reference by 2 times ..... ???

 722 QCAD (main)Bug ReportLow Mouse wheel zoom .... Closed
100%
Task Description

XP 32

Vers. 3.0.0
Mouse zoom in and out with the Mouse-wheel = nice and smooth ;)

Vers. 3.0.5
Mouse zoom in and out with the Mouse-wheel = jumping zigzag ways during it zooms .... :(

 737 QCAD (main)Bug ReportLow Block with Circle - can't snap to ... Closed
100%
Task Description

XP32 / QCAD 3.0.5

Block with Circles - can’t snap to “Reference”, Intersection.

 738 QCAD (main)Bug ReportLow Lost Layer and Block List caused by closing the empty " ...Closed
100%
Task Description

XP32 / 3.0.5

Example case:
I open QCAD and I have automatically the “Untitled 1” drawing.
If I open now an additional, saved drawing I have all Blocks and Layer listed and I’m able to work normal with my drawing ...
If the “Untitled 1” drawing is NOT the active drawing and I close it with the X in the Tab I will lose the Layer and Block List (only the List!) in the other drawing ....

I have to play around with QCAD “Window minimizing” “Draft mode” or I have to reopen the drawing to get the Layer/Block List back!
Seems to be a refresh problem .....

Funny is that this not occurs if I have opened a couple drawings .... but in this case I’m able to switch (and refresh?) the drawings with the tabs ....

 740 QCAD (main)Bug ReportLow Draw - Arc - Two Points and Radius: wrong console outpu ...Closed
100%
Task Description

XP/32 QCAD 3.0.5

... after picking the first Point a wrong message appears what says:
“Warning: The two points are identical”

 742 QCAD (main)Bug ReportLow Autosave weird behavior ... Closed
100%
Task Description

QCAD 3.0.5

Case:
Start QCAD → Went to the Menu → File → Open recent → choose a Drawing out of the List → click to open this existing drawing.
Message windows appears: QCAD found an Autosave drawing .... will you open it? I choose NO!!!
I go back to the Menu → File → Open recent → will choose the same Drawing .... but it is not anymore listed!!!
Ok - I’m not lazy ...
... back to the Menu → File → Open → find the original file on my Hard drive → click to open it and get the Warning Message:
“Can not open the File ...... Please check your access rights bla bla bla....”

Question: In this case I’m only able to open the bak file and “Save as” under the old name to get my starting situation back ...?
Just because I said “NO” to load the Backup File in first place ... ? :-(

 744 QCAD (main)Bug ReportLow QCAD 3.0.5 instable ... Closed
100%
Task Description

XP32/ QCAD 3.0.5

The 3.0.5 Version is very instable - crashes many times in an hour :-(

Problem signatur:
AppName: qcad.exe AppVer: 0.0.0.0 ModName: qcad.exe
ModVer: 0.0.0.0 Offset: 00de468d

 749 QCAD (main)Bug ReportLow QCAD 3.0.6 / 3.0.7 autosave crashes Closed
100%
Task Description

XP32/ QCAD 3.0.6

The 3.0.6 Version (Snapshot) is very instable - crashed always after a couple minutes ... :-(

Problem signatur:
AppName: qcad.exe AppVer: 0.0.0.0 ModName: qtcore4.dll
ModVer: 4.7.4.0 Offset: 0005d1e8

 751 QCAD (main)Bug ReportLow Dimension Leader: Arrow attribute Closed
100%
Task Description

XP/32 QCAD 3.0.0

If I try to change the Attributes of a dim leader it doesn’t works.

Leader → Option Arrow head - marked or not - no impact - always with arrow,

Property editor:
Geometry of leader,
Arrow: yes or no - doesn’t changed anything,
Vertex: Index Number doesn’t change anything,

 755 QCAD (main)Bug ReportLow Text: Redundant Infos if I customize the Text hight .. ...Closed
100%
Task Description

If I customize the Text height I get redundant Infos for the Contents...

 759 QCAD (main)Bug ReportLow Button "Flip Block" doesn't remains Highlighted ... Closed
100%
Task Description

Insert Block:

If I use the “Flip Block” option (Horizontal and/or Vertical) the Buttons doesn’t remains Highlighted. It should remain Highlighted ... ;-)

 791 QCAD (main)Bug ReportLow Info Tool Polygonal Area closing with right mouse click ...Closed
100%
Task Description

3.0.8
Setting:
Application Preferences - Widgets - Command line - Show information as dialog: Ticked!

If I use the Info Tool Polygonal Area and decide to close it with a right mouse click the “Show information” dialog window pops up - just as expected.
If I close the Dialog window with the OK Button .... a “CAD Tools” Menu pops up. Not expected ;-)

By the way - any chance to control the number of digits after the decimal point in the Info dialog window? 15 decimal places are most of the time just to much!

 811 QCAD (main)Bug ReportLow Rectangle(RE) with a defined x,y coordinate start point ...Closed
100%
Task Description

QCAD 3.0 / 3.1

Test case:
set relative zero,
choose rectangle RE tool,
choose snap tool coordinate,
Now QCAD is asking for the x,y coordinates and my thinking was it will just use them for the start point (what I’m looking for!) - but .... QCAD will use the given coordinates for the Start point of the rectangle(right!) AND as size for the rectangle(wrong!) ;-)

 812 QCAD (main)Bug ReportLow Wrong Alert messages ... Closed
100%
Task Description

3.1 Beta / XP32

Two Points (C2),
Two Points and Angle (A2),
Two Points and Radius (CD),
ONE Mouse-click = Alert message: “The two points are identical”

Tangent two circles (LT2),
Click on first circle = Alert message: “No tangent possible”,
Click on second circle = Alert message: “No tangent possible”

 838 QCAD (main)Bug ReportLow Grid settings are not taken over ... Closed
100%
Task Description

If I do my Grid settings - there are not correctly taken over in existing or new drawings.

Some kind of multiplication?

 843 QCAD (main)Bug ReportLow Can't snap to reference point of a block reference Closed
100%
Task Description

If I need to move etc. a block regarding to his reference point - I’m not able to snap to the reference point :-( All other snap points are appear as just fine working ...

 846 QCAD (main)Bug ReportLow Auto Trim at an arc ... Closed
100%
Task Description

If I have to “Auto trim” a line between to construction (or what ever ;-)) lines the Auto Trim function works as expected!

If I use the same constellation with an arc the Auto trim function will give me an uncontrolled, unexpected result ;-)


 852 QCAD (main)Bug ReportLow Circle hatch undo not correctly working .... Closed
100%
Task Description

Task: Selected “all” (Circle + Hatch)
Move / Copy tool,
Reference, move/copy, place, KEEP ORIGINAL, OK,
Undo,
Works!!!

Same scenario but DELETE ORIGINAL,
Undo,
Doesn’t works correctly! :-(

 861 QCAD (main)Bug ReportLow Widgets blends to early in ... Closed
100%
Task Description

I don’t know: Bug or Feature request ....

Example: If I move the “Library Browser” with the mouse closer than ~63px to the top corner it will go to blend in.
Undo doesn’t works in this case - so I have to pull it out and re-size the widget.

Usually it should blend in if I’m over the bar or at least I have to be much closer to the corner - or not?

 862 QCAD (main)Bug ReportLow Dimension settings - "Keep proportion" setting can't be ...Closed
100%
Task Description

XP 32/ QCAD 3.1.6

Drawing Preferences - Dimension settings - “Keep proportion” setting changes will not be saved with the Drawing. :-(

Maybe you have to try it a couple times with the same drawing ;-)

 863 QCAD (main)Bug ReportLow "Auto Zoom" is aligned also on invisible blocks ... Closed
100%
Task Description

If I switch a Block to invisible and use then the “Auto Zoom” in my drawing - the zoom cutout will appear like the block would still be visible :-(

Attachment:
1. “Auto Zoom” (Z, A) / Visible Block
2. “Auto Zoom” (Z, A) / Invisible Block

 865 QCAD (main)Bug ReportLow Invisible Blocks are causing a warning Window ... Closed
100%
Task Description

If I use in an area with invisible Blocks the “rectangular selection” in “lower left to upper right” direction for a move/copy, mirror, clipboard etc. action - a warning window appear. Also the reference points of the invisible blocks are visible.

If I use the “rectangular selection” in upper right to lower left direction everything works as expected.

 870 QCAD (main)Bug ReportLow Isometric projection of text creates unwanted bounding  ...Closed
100%
Task Description

If I use the isometric tools for a text QCAD will keep a construction Box as a leftover ...

 887 QCAD (main)Bug ReportLow Wrong warning window with area selection ... Closed
100%
Task Description

Lower left to upper right selection which includes invisible blocks causes warning window if I try to use the clipboard “copy” or “cut” function:

“Trying to draw on or modify entities on a locked or invisible layer”

... but it works!

Upper right to lower left selection over all doesn’t calls the warning window!

 891 QCAD (main)Bug ReportLow Block - Create Library item: unit / reference point pos ...Closed
100%
Task Description

Created library item does not have the same unit as source drawing.
Zero point is not at chosen reference point.

Vers. 3.2.1, Drawing Unit “inch”!

... it takes the absolute 0 point as reference.

Millimeter works fine!!!

Rest of the units .... I don’t know ;-)

 937 QCAD (main)Bug ReportLow Info Tools - Area: "Add measurement to drawing" doesn't ...Closed
100%
Task Description

XP/32

Info Tools - Area: “Add measurement to drawing” doesn’t work as expected

 963 QCAD (main)Bug ReportLow Clip to rectangle / clear area on block references Closed
100%
Task Description

“Clip to rectangle / clear area” in combination with a Block will explode the Block and change all line attributes for the exploded ex-block.

Pics: Before / after using the tool.

 996 QCAD (main)Bug ReportLow Can't scale controlled "Rich Text" multi Lines ... Closed
100%
Task Description

If I have multi lines with different heights in a Rich Text the scale tool works not at all or the scale factor works different on each lines.

This example is scaled with factor 2. First line works - second line keeps the proportions.

 1020 QCAD (main)Bug ReportLow Line2PEx, Option-bar for angles disregard the Decimal P ...Closed
100%
Task Description

My QCAD setting for “Decimal Points” is “dot” instead of “comma”.
(Application Preferences, General, Coordinate Format, Decimal Point: Dot ‘.’(Default))

The new Line2PEx tool will only accept a comma - if I use a dot it will be automatically replaced by a comma.
The displayed angle in the drawing will use a dot.
No red Text font warning for using an invalid value.

I used a screen-shot with an additional coordinate option to make it a bit clearer:

 1025 TranslationBug ReportLow Selection Filter / German translation Closed
100%
Task Description

The German translation isn’t shown in all parts of the Selection Filter.

 1028 QCAD (main)Bug ReportLow Draw > Line > Rectangle with Size: options toolbar layo ...Closed
100%
Task Description

... just cosmetic!

Rectangle with size: The option box “Reference Point” is a bit to small to show the whole text of the chosen option.

English / German = same behavior.

 1058 TranslationBug ReportLow Benutzerreferenz, anstatt skaliert wurde rotiert verwen ...Closed
100%
Task Description

In der Benutzerreferenz für Skalieren wurde irrtümlich das Wort “rotiert” anstatt “skaliert” verwendet

 1077 QCAD (main)Bug ReportLow Centreline Cross using wrong Coordinate Format Closed
100%
Task Description

My Coordinate Format/Decimal Point is adjusted to Dot’.’ but the “Centreline Cross (C,S)” will only accept Comma for Angel. X/Y works fine!

BTW: Is the spelling correct in the Menu? Should it be spelled “Centerline Cross” instead of “Centreline Cross” ...?

 1081 QCAD (main)Bug ReportLow Modify > Explode: Fails for dimension entities Closed
100%
Task Description

Exploding a usual block - no problems.
Exploding a dimension - it will freeze the explode tool until I reset the tool or use another tool. New drawing / old drawing doesn’t matter.

Showing tasks 1 - 50 of 206 Page 1 of 51 - 2 - 3 - 4 - 5 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing