QCAD Bugtracker

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

Hi,

from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.

Pic 1: Given situation
Pic 2: Result after using this new snap tool

Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?

It would be nice to have an additional Radius Measurement tool with short leads. The current Radius tool shows always the lead line to the center of the radius what is in many cases not useful.

I’m not asking for a workaround

Hi,
In paperspace I can scale and rotate etc. a viewport but I can’t mirrow it for to me unknown reasons.
After reading and testing this user request I agree that it would make sence to have such an option. The solution from Andrew to accomplish that task with blocks / edit block in place is already a nice solution but to me it feels like paperspace would be the correct place with less action to manage. The user can still design the drawing as usal in modelspace without thinking about the “special treatment” for the block which is used for the mirrowed presentation.

Refering to forum conversation:
https://qcad.org/rsforum/viewtopic.php?f=32&t=10611&p=43614#p43614

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601

Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”.
It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.

It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...

Screenshot:
First row: Befor / Second row: after

... inclusive trim option

I’m already able to use the Circle tool “2 Tangents and radius” to accomplish this task but it is a lot of break out etc. action needed to clean the shape afterward.

Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033

It would be nice if the Info Tool / Add Measurement to drawing option would use the same settings like the “Dimension settings” for Font and Text height. It’s a kind of similar function in a drawing and should have the same style. Maybe with an on/off switch?

Hi,

if I need to design a bolt circle (circle on circle) and the single bolt diameter and the quantity of circles are given then I can use the QCAD Polygon Tool “Polygon 2 Points of Side” ... but for the Length of the side I have to do a workaround (Line with this length) to determine the desired length.

It would be very convenient to have an additional tool for a Polygon which has the possibility to ask me for the center, corners and the length of the sides.

Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.

It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.

We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...

It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.

If I move something and it went wrong I can easily undo the last move and start over without the need of a re-selection.
If I copy something and it went wrong I can undo the last copy but I have to re-select everything again.

It would be nice to keep the once chosen selection in both “undo” situation!

Same with similar functions like rotate etc. ....

3.0.8.
Bug Report or Feature Request ..... I’m not sure!

If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale.
x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...

It is nice that I can scale or rotate a block - but right now I see also a big plus in a kind of locking function for Blocks.
It would be nice to have a “locked” option ad least for the scaling of blocks.

Example: Think about Clives “Radiator ‘Cover’ screen” http://www.qcad.org/rsforum/viewtopic.php?f=51&t=2060 and how you could manipulate this screen with “scale blocked blocks”

Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.

Same scenario tested with “Hatch from Selection” (HA) ...
... everything works like a charm

Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.

Forum topic:
https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495

Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good.

See also:

https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245

The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.

Headline should already explain the issue ...

Hi,

I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.

It would be nice to have an option to turn this preview on/off.

When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.

Case:
Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level

Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.

“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.

Would be a nice time saver to have the same options for “Paste along Entity” too.

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

Hi,

we have already this nice tool “Angle bisector”.

I would really appreciate if we could get the same function for parallel lines to place a line exactly in the center of both lines.

Thanks.

Hi Andrew,

we know that you need to have always software performance in your mind to decide which features / tools can / should be implemented and on which way.

I really appreciate your effort to find the best middle way between software features and performance but I think also it’s a tough call to appraise worldwide the overall customer equipment to make the software workable to the best for everybody. That isn’t possible without compromise.

Maybe it would make sense to think about a new dialog in the “Application Preferences” to let the user decide what kind of feature are absolutely needed regarding to his/her work-task / equipment. I don’t mean that you need to cover every single thing but the main “performance jeopardy’s” should be covered with an on/off switch.

Yes I know - that isn’t done in 5 minutes but I think that can make your life easier in the long run and will cover even more customer.

Just my two cents. ;)

... please see below:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

Hi,

I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go.
Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.

The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.

And I’m confident - there are many more useful scenarios for a tool like this one ...

pics: “Toggle visibility all” with one click:

It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.

If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...

It would be nice to have some kind of visual info that QCAD is working.

Case:

Select a block array,
put it with “Copy with reference” or “Cut with reference” into the clipboard,
choose a reference point which isn’t in the center of the array,
use the paste tool / with option “flip pasted entities”

If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point.
If I try to flip in both directions at the same time - you can’t see this effect.

Ruler ticks are not corresponding to the grid points,
Ruler will completely disappear at a certain zoom level,

Settings:
Drawing unit: inch,
Grid settings: Grid 1, Meta Grid 12,
Dim Label Format: “Engineering, 0’-0.0”

see topic below:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014

... would be nice.

If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².

I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ...