QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

ID  descCategoryTask TypeSeveritySummaryStatusProgress
2415QCAD (main)Bug ReportVery LowIssues with OffsetBothSidesAssigned
0%
1 Task Description

Andrew,

I can’t find any documentation concerning OffsetBothSides under Misc .. Modify.
It is not listed in the QCAD features nor in the changelog.

There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.

The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline.
It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.

There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing.
The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.

I only successfully created a dual offset for open Splines, open or logically open Polylines.
All other attempts result in a single offset at the indicated side.

There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected.
Only tested it on a Win7 platform.
I don’t suspect that version 3.27.8 includes a fix for that ... ;-)

Regards,
CVH

2406QCAD (main)Bug ReportLowSVG Export incorrect on blocksAssigned
0%
1 Task Description

When using SVG export on a drawing with a block defined, the export is incorrect. Arcs are drawn incorrectly and parts of the block are missing. If that block is exploded, the SVG export is correct. Attached is a block on the lower left and the same block on the lower right after explode. Also attached is the resulting SVG file.
This is not always the case. Some blocks are correctly exported to SVG. The upper row is again a block on the left and the same block exploded on the right. It exports properly.

2405QCAD Community EditionBug ReportLowDimension scaling not workingAssigned
0%
Task Description

I’m using QCAD Community Edition 3.27.7 on Windows 11.

When I started my drawing, I was able to change the size scale factor of (existing) dimensions using “Edit/Drawing Preferences/Dimension/Dimension Settings/Size scale factor”. However, suddenly this feature stopped working and now I cannot switch the dimension scale factor any longer.

I used this feature to be able to adapt the scale factor of the dimensions when printing in different scales.
I.e. all my drawings are in “original” size but when it comes to printing, I print some parts in scale 1:2 (in which case I used to set the size scale factor of the dimensions to 2) and some parts in scale 1:10 (in which case I used to set the scale factor of the dimensions to 10). Using this procedure, the dimensions have the same size (font size, arrow size, gaps etc.) on both drawings.

I have attached the drawing, that shows the described issues.

2398QCAD (main)Feature RequestLowExcessive AutosaveAssigned
0%
Task Description

Autosave currently updates the backup file indefinitely regardless of whether the drawing has been modified since the last autosave. Request only update autosave following additional edits since last autosave.

2397QCAD (main)Bug ReportLowPost processor "LaserGBRL (offset) [mm] fails at tabsAssigned
0%
1 Task Description

Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.

Forum topic:
https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495

2396QCAD (main)Bug ReportLowMissing Dim/Label Format information from an extern wri...Assigned
0%
Task Description

Please refer to forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9556

The attached example file is written with a third party CAD program in R15.
Opened in QCAD CE all Dim/Label information are available.
If I load this drawing in QCAD Pro the Dim/Label information are lost.

If I load and save the example drawing with CE the newly written dxf is readable in Pro without any issue.

2391QCAD Community EditionBug ReportLowFix Dark Theme for LinuxAssigned
0%
Task Description

The dark theme for Linux is broken:

- Some icons have dark background (expected) and black foreground color (that should be replaced by white of very light gray)
- Some icons have light background (not cohesive with the theme).
- The command history shows dark blue font on dark gray background.
- The grid’s ruler shows black font over dark background for the numbers.
- The icons folder is missing in the GitHub repository, but other themes have that folder.
- The general icons (open, save, and so on) are not dark theme friendly. A better approach for maybe all the themes would be to use something like the breeze icons pack for LibreOffice, and it will have the added benefit of making the app look more modern.

The icons issue is the biggest problem. They should probably replace the black color for white or very light gray. Even the red accent color is not ideal for dark themes, is not the main issue.

Attached is an image that show the problems and another that shows LibreOffice with the Dark Breeze theme for reference.

2390QCAD (main)Feature RequestLowPlease add U.S. Survey Feet to the Unit / convert listAssigned
0%
1 Task Description

Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good. ;-)

See also:

https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245

2387QCAD (main)Feature RequestLowOpen Drawings on Layout Block by DefaultAssigned
0%
Task Description

As the layout block contains the drawing sheet, the number, the viewports, it’s the presentable part of the drawing.

Maybe QCAD could be able to save on the dxf the “last state” of the drawing. If I saved on the Model and closed, it would open on Model... and if my last save was on the Layout”n”, it would open on Layout “n”.

At least on my work area, when opening a finished drawing, it’s the ideal for it to be opened in a Layout (if it was the active block while saving).

2386QCAD Community EditionBug ReportLowLabel "Linear format" missing in Property EditorAssigned
0%
Task Description

no task description

2381QCAD (main)Bug ReportLowCrash when modifying toolbar settingsAssigned
0%
Task Description

QCAD Professional 3.27.6.0 running on macOS 12.4 (21F79)

QCAD sometimes crashes when I am adding or removing items from toolbars. It isn’t consistent and I haven’t seen a pattern about which items trigger the crash. It has happened while editing different files, but I’ve attached attached a very simple example and two crash reports

2378dwg2svgFeature RequestLowExport attributes on block references as namespaced XML...Assigned
0%
Task Description

dwg2svg supports exporting the layer name (and probably others?) as namespaced XML attributes (`qs:layer`) which works well.
However I’d like to export block attributes as well, as seen on the following screenshot:

https://imgur.com/a/wUd0adE

(...so `ROOM_NAME` would become `qs:ROOM_NAME=”Eötvös terem”` on the respective XML element).

Thanks in advance.

2374QCAD/CAMFeature RequestLowAdd Spindle Speed to Toolpath DialogAssigned
0%
1 Task Description

When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.

Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.

Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?

Many thanks’, and best regards.

2371QCAD (main)SuggestionLowInclude more properties for polylines in the Selection ...Assigned
0%
1 Task Description

Andrew,

Not OS or Version depending.

We can’t filter on some specific properties of polylines.

Handy would be:
- Global Width
- Orientation

Specific:
- Polyline Pattern
But I don’t really search for them ... For some post-op I just need them all to be set to ‘No’.
- # of vertices
Filtering the complex from the more simple ones.
- Including Bulges or not
To seperate polylines with arc segments form others.
There some operations that don’t really work with bulging.
- Z values and/or global Z
This would make sense for some but filtering on Z is not common under QCAD as it is 2D.

Regards,
CVH

2370QCAD (main)Feature RequestLowRetain global width / segment widths when reversing pol...Assigned
0%
1 Task Description

Andrew,

Changing orientation of a polyline with RV or by changing it in the Property Editor clears the global width value.

Single line pieces as polyline default to CCW.
Still the global width is cleared when trying to set them CW.

I didn’t update since 3.27.0 but reading this topic I suppose it still is valid.
Related: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9362

Regards,
CVH

2354QCAD (main)Feature RequestLowcopy-paste between two QCAD instancesAssigned
0%
2 Task Description

Hello,

I’ve quite often the task to transfer changes from one set of drawings to another (similar) set.
My ideal setup would be to open one set in one window and the other set in another window.
Both windows would be arranged side-by-side (larger monitor).
Changes would be copy-pasted from one set to the other.

From #2352 I’ve learned that there is a command-line option to achieve this.

Unfortunately it’s not possible to copy-paste between these instances.

And yes, it’s important to do this in two windows to see both versions at the same time.
So, tabs are not the answer.

It’s also ok if i could detach a tab from one instance and arrange it aside of the main window (like the property editor).
Than all data transfers would happen inside the same instance.

Best regards,
Klaus

2353QCAD (main)Feature RequestLowadd theme folder to a local shared pathAssigned
0%
5 Task Description

Would it be possible to add Qcad’s theme folder to the local shared path, for example this would be /home/username/.local/share/QCAD/QCAD/themes for Linux. I know this works well for line types and would be extremely helpful for themes.

2351QCAD (main)Feature RequestLowFile Thumbnail PreviewAssigned
0%
1 Task Description

Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.

2348QCAD (main)Bug ReportLowtext in simple format do not save position after save t...Assigned
0%
1 Task Description

How to reproduce the bug:
1-open a new file
2-select text tool, simple text(one line,no formatting) and alignment in base-left
3-write some text in somewhere position in the draw, repeat this in others positions
4-save the file in .dxf R15 [2000/LT2000] (dxflib) format
5-close Qcad
6-open the saved file, the writhed text lose original position and now all the text have 0,0 position

2347QCAD (main)Bug ReportLowModify / Clip to rectangle issueAssigned
0%
1 Task Description

The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.

2341QCAD (main)Feature RequestLowmanage image referencesAssigned
0%
1 Task Description

QCAD. ver. 3.27.1.0 (3.27.1)
Qt version: 5.13.2
Architecture: x86_64
OS Windows 11

It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again.
I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)

2340QCAD (main)Feature RequestLowLayer List / Block List: Link minus icon to keyboard de...Assigned
0%
Task Description

Referring to Layer List / Block List: It would improve the workflow if the Delete key on the keyboard would be linked to the minus icon (Delete). The command ER is also ignored in both list.

2339QCAD (main)Feature RequestLowBlock List multible selectionAssigned
0%
Task Description

It would be nice to have the possibility to select multiple blocks with Shift and/or CTRL + mouse like the Layer List to use a delete etc command on all selected blocks at once.

2338QCAD (main)Feature RequestLowShow non-QCAD custom XDATA optionallyAssigned
0%
1 Task Description

QCAD (before version 3.27?) used to show some custom XDATA, e.g. tag 1000, even for application names that are not “QCAD”, which for me was useful, so it’s somewhat of a regression. (I think it was broken when selecting multiple items, maybe that’s why it was removed.)

I suggest to bring that feature back, but maybe show it only when a single element is selected if that’s easier.

(As a workaround/hack I guess it would be possible to rewrite the required information as QCAD compatible XDATA externally I guess.)

2337QCAD (main)Feature RequestLowDistance information should be available in 2D and 3DAssigned
0%
Task Description

As per https://qcad.org/rsforum/viewtopic.php?f=32&t=9089, I suggest to extend the distance information tools:

* show Delta Z (at least when any of the elements has Z information)
* allow switching between 2D and 3D distance
* maybe allow to show both
* maybe change the text to distinguish between them (”Distance” → “Distance 2D/3D”)

2336QCAD (main)Feature RequestLowAdd command to go back to previous nested blockAssigned
0%
Task Description

“em” just always goes back to the main drawing. But for nested blocks, when jumping from edit mode of one block to the next nested block, it would be helpful to have some “ep” to go back to the previous block.

This was discussed at the forums...

2331QCAD/CAMFeature RequestLowTabs: Control over on which particular profile used.Assigned
0%
Task Description

Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.

It would be nice to have some kind of control on which profile a tab has to be used.

2330QCAD/CAMFeature RequestLowToolpath optimization optional (on/off)Assigned
0%
2 Task Description

Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033

2328QCAD (main)Bug ReportVery Lowdrop down, using keyboardAssigned
0%
Task Description

Minor issue!
When using keyboard to initiate the dropdown menus.
I noticed the ALT “D” does not cycle through the headings Draw & Dimension in the same way.
ALT “M” cycles though Modify & Misc or ALT “S” cycles though Select & Snap.
User Name: StanTibbs
E-mail: [email protected]

2325QCAD (main)Bug ReportLowdwg file crashes QCADAssigned
0%
Task Description

Regarding to forum post:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8982&p=35836#p35836

dwg loaded in 3.27.1 frees QCAD (no response) and a Win10 PC. Same drawing loaded in 3.26.0 causes no problems. It looks to me that two hatches (handle 198b6, 198ba) are the culprits.
Drawing saved without those hatches opens without any problem in 3.27.1.

TECNOFLEX symbol library.dwg = original file from forum post
TECNOFLEX symbol library_mod.dwg = my modification

2316QCAD (main)Feature RequestLowModify > Detect Duplicates: implement for infinite line...Assigned
0%
1 Task Description

Headline should already explain the issue ... ;-)

2315QCAD Community EditionBug ReportLowCrash after ~10-th times move Spline nodesAssigned
0%
Task Description

1. Create spline
2. Move spline nodes. After ~10 times move qcad is crashed with backtrace:
Thread 9 “Thread (pooled)” received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fff56dc9640 (LWP 8224)]
0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848) at /usr/include/qt5/QtCore/qlist.h:492
492 current→v = new T(*reinterpret_cast<T*>(src→v));
(gdb) bt
#0 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848)

  at /usr/include/qt5/QtCore/qlist.h:492

#1 QList<QSharedPointer<RShape> >::detach_helper (alloc=<optimized out>, this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:835
#2 QList<QSharedPointer<RShape> >::detach_helper (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:849
#3 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178
#4 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178
#5 0x00007ffff686182a in QList<QSharedPointer<RShape> >::end (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/qlist.h:342
#6 QList<QSharedPointer<RShape> >::last (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:364
#7 RSpline::appendToExploded (this=0×555557311510, line=...) at math/RSpline.cpp:964
#8 0x00007ffff6867059 in RSpline::getExploded (this=0×555557311510, segments=1457293328) at math/RSpline.cpp:919
#9 0x00007ffff686682a in RSpline::getLength (this=this@entry=0×555557311510) at math/RSpline.cpp:1026
#10 0x00007ffff6c11490 in RSplineData::getLength (this=<optimized out>, this=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineData.h:178
#11 RSplineEntity::getProperty (this=0x5555573114a0, propertyTypeId=..., humanReadable=<optimized out>, noAttributes=<optimized out>,

  showOnRequest=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineEntity.cpp:253

#12 0x00007ffff67cc214 in RPropertyEditor::computePropertyValue (ccProp=...) at /usr/src/debug/qcad-3.27.0.0/src/core/RPropertyEditor.cpp:574
#13 0x00007ffff67d298f in QtConcurrent::FunctionWrapper1<void, RProperty&>::operator() (u=..., this=0x555557757f18)

  at /usr/include/qt5/QtConcurrent/qtconcurrentfunctionwrappers.h:80

#14 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIteration (it=..., this=0x555557757ee0)

  at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:68

#15 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIterations (this=0x555557757ee0,

  sequenceBeginIterator=..., beginIndex=<optimized out>, endIndex=15) at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:77

#16 0x00007ffff67d2c9d in QtConcurrent::IterateKernel<QList<RProperty>::iterator, void>::forThreadFunction (this=0x555557757ee0)

  at /usr/include/qt5/QtConcurrent/qtconcurrentiteratekernel.h:255

#17 0x00007ffff44b5b2d in QtConcurrent::ThreadEngineBase::run (this=0x555557757f20) at qtconcurrentthreadengine.cpp:302
#18 0x00007ffff59c8d52 in QThreadPoolThread::run (this=0x555556198b10) at thread/qthreadpool.cpp:100
#19 0x00007ffff59c5a61 in QThreadPrivate::start (arg=0x555556198b10) at thread/qthread_unix.cpp:329
#20 0x00007ffff546c717 in start_thread (arg=<optimized out>) at pthread_create.c:435
#21 0x00007ffff54f018c in clone3 () from /lib64/libc.so.6
(

2308QCAD (main)Feature RequestLowViewport Scale FieldAssigned
0%
Task Description

It would be helpful if the scale field that appears while placing a viewport would also re-appear when the viewport is selected after it’s already been placed in the layout. It would also be helpful if the pre-populated values in the dropdown matched those in the global layout scale field.

2307QCAD/CAMFeature RequestLowTools to create dogbones or corner overcut Assigned
0%
2 Task Description

The inside corners of profile tool paths have rounded inside corners. This occurs because the rounded outside the bit cannot make it all the way into the corner of the feature. Think of tracing the inside wall of a cardboard box with a can of soup. The can makes direct contact with the box walls, but its
round shape is unable to completely fit into the tight corners— there’s always a gap.

In a dog-bone overcut (see the figure in attachment), the inside profile corner is enlarged into a semicircle, allowing the sharp edges of the mating piece to slide through without interference.

When a dog bone is applied to the inside corners, as shown in the second figure in the attachment, the joints fit together nicely!

The following website explains what should be implemented More elegant CNC dogbones

There are two ways to implement this tool. Either you modify the original design (as implemented in Fusion 360) or you can do it at the moment you define the tool path (Estlcam allows you to do this for example). See the feature Corner overcut, on Estlcam website

2302QCAD (main)Bug ReportVery Lowpolygon.getSelfIntersectionPoints(tol) returns 3th inva...Assigned
0%
1 Task Description

Windows 7 pro 32 bit msi-Installer
Version: 3.26.4.5 (3.26.4.5)
Internet: QCAD.org
Build Date: Jul 20 2021
Revision: e596276
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Andrew,

In the attached dxf:
Besides that it is clear that duplicate vectors are not filtered ...
Where a segment is crossing in another node a non valid node is returned as self-intersection point.
Seems to be unrelated to CW/CCW or tolerance.

Where 2 nodes coexists 4 duplicate vectors are returned.

Regards,
CVH

2301QCAD (main)Feature RequestLowRotate preview on/offAssigned
0%
1 Task Description

Hi,

I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.

It would be nice to have an option to turn this preview on/off.

2300QCAD (main)Feature RequestLowDuplicate layout blocks with contentsAssigned
0%
2 Task Description

Add a tool to duplicate a layout block with contents.

2299QCAD (main)Feature RequestLowAdd support for multi line attributesAssigned
0%
2 Task Description

Multiline attributes can contain linefeeds and formatting like MTEXT.

2297QCAD (main)SuggestionVery LowFew UI inconsistencies Assigned
0%
Task Description

1) Line with command prompt in Command Line widget is missing padding/margin - letter C is glued to frame.
2) In the “Selection Filter” widget there is an “whitespace” character before colon “:” symbol on multiple places, it doesn’t seem repeat anywhere else

2296QCAD (main)Feature RequestLowCustom font type and size for command line widgetAssigned
0%
Task Description

Would be nice to change default font type and size for command line widget.

2295QCAD (main)Feature RequestLowDeselect all with Escape keyAssigned
0%
Task Description

I’m used to have persistant selection while drawing (Application Preferences > Graphics View:Appearance > Selection), but I’m missing deselection of all objects with ESC key. I have seen the option to deselect with right key, but it’s nice to have right key for context menu.

Currently ESC key cancels current active command, but would be nice if there is no command active to also deselect all features by default.

2294QCAD (main)Feature RequestLowAuto Zoom with middle mouse buttonAssigned
0%
Task Description

I tried to assign double click on middle-mouse button to zoomauto command, but it seems it’s not possible currently.

Would love to see this feature.

2293QCAD (main)Feature RequestLowinsert attributes into a point elementAssigned
0%
1 Task Description

Would it be possible to extend the tool for importing points with a label so that when importing points into the drawing (as it is now), the attributes of the point are taken from the csv file and written to the point’s own properties? See attachment. This would extend the functionality of the tool and I assume that it would also lay the foundation for the possible re-export of such points from the drawing to a csv file, including all the details.

2290QCAD (main)Bug ReportVery Lowloading the Drawing Preferences using enter, using ente...Assigned
0%
Task Description

I use CTRL + I to pull up drawing preferences. Upon changing the dimension settings quickly and closing it normally by pressing enter it closes. But if i go to the next tab (drawing tab) then press enter to load it up quickly instead of pressing CTRL + I. Upon changing the dimensions settings and pressing enter to close it, it won’t close but instead flash and i have to keep pressing enter and eventually it closes.

I think this is a bug.

I have the Pro Version

2289QCAD (main)Bug ReportLowVertical Line Tool stops accepting inputAssigned
0%
Task Description

When using the vertical line tool, you can enter a length value in the options toolbar, then place the line. If you want to change the length, you just need to enter a new value and the length field will update. However, there seem to be cases where after 10-20 entries, the focus goes off the length field in the options toolbar, requiring the user to bring focus back to continue. I could not seem to duplicate this behavior with the horizontal line tool.

2288QCAD (main)Feature RequestLowLayer State WidgetAssigned
0%
3 Task Description

The option of a layer state widget would be a nice way to see and select between different layer states.

2287QCAD (main)Feature RequestVery LowEvaluate draw order for preference "Prevent white-on-wh...Assigned
0%
Task Description

The Application Preference setting “Graphics View - Appearance - Prevent white-on-white/black-on-black display” seems to be a global setting that doesn’t take the draw order into account. For example: With the setting enabled, it prevents creating a white hatch of a higher draw order on top of a larger, colored hatch with lower draw order (background). The preference does not seem to evaluate if the object is truly drawn as “white-on-white”.

With the preference enabled, setting the object color as “white” will set the “white” color label, but the object color actually stays black. Its hard to determine why it happens in that case.

Is it possible to let the global preference setting be applied to objects after evaluation of the draw order, and determine if the object actually is a true case of white-on-white?

My workaround: Disable the preference setting (I think it is default = on), and only enable it for ad-hoc checks of hidden and overlooked objects.

2284QCAD (main)Bug ReportLowZooming in & out causes grid/snap scale value change in...Assigned
0%
1 Task Description

I have set the grid/snap value to X=.0625 Y=.0625 on all 4 viewports.
When zooming in and out the grid/snap scale changes from .0625 to 3.90625. at this point the grid/snap points differ,
This causes a variation in the grid/snap reference points lending to drawing errors.

example
When I use the grid settings defaults .01, when zooming in and out, the grid/snap scaling doesn’t seem to have this issue.
Other values do, See below.

set value first zoom second zoom next zoom

	point		point		point ...	

0.01 0.1 1.0 10.0 ...
0.02 0.04 0.4 4.0 ...
0.04 0.16 1.6 16.0 ...
0.05 0.25 2.5 25.0 ...
0.0625 0.390625 3.90625 39.0625 ...
0.0254 0.64516 6.4516 64.516 ...

Why is there a squaring of the original set value? Which then becomes a new zoomed grid/snap value?

QCAD Professional
Version: 3.26.4.0 (3.26.4)
Internet: QCAD.org
Build Date: Jun 3 2021
Revision: 0bb4334
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

2282QCAD (main)Feature RequestLowAdd a "Save As" command while editing blocks in placeAssigned
0%
1 Task Description

As a heavy mechanical drawings user, it would help a lot to have an option to exit a block saving as a new name and making it a new entity from that time ahead.

Example: if a have a lot of screws, one of then is behind another peace and need the to have some lines changed to hidden style lines, in the flow of the work is great if I edit that screw in place and when exiting have the option to save as a new block, to don’t mess with other entities of the same block that I don’t want to change. Yes, there is a workaround that is duplicate and rename the block prior to the editing, but a save as seems to work easier.

Thanks Andrew and team!

2272QCAD (main)Feature RequestLowSupport unit "US survey foot"Assigned
0%
Task Description

In the US, it is (unfortunately) still common to use US survey foot. It seems at least some DXF applications/libraries support this unit as a $INSUNITS value, some references:

There are two issues regarding this with QCAD:

  1. If you open a document with $INSUNITS being 21, it’s reset to 0 (unitless/unspecified) when saved again, even when not changing anything.
  2. It is not possible to select these units in the GUI.

I don’t know about standardization of these values, but my hope is that it’s at least possible to preserve the unit in an existing drawing. Given that this unit is supposed to be obsolete in some years, it might seem less important, but due to this transition, it might get even more important to be able to distinguish between units. Thanks!

Showing tasks 51 - 100 of 519 Page 2 of 11 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing