QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  asc
901QCAD (main)Feature RequestLowDimension text stylesAssigned
0%
Task Description

Support custom dimension text styles for imported DXF / DWG files.

1697QCAD (main)Feature RequestLowDimensioning - add option for horizontal text alignmentAssigned
0%
Task Description

Dimensioning - add option for horizontal text alignment.

Basically an option in drawing preferences to align text horizontally instead of vertically.

1699QCAD (main)Feature RequestLowDimensioning - add option to insert text in the middle ...Assigned
0%
Task Description

Dimensioning - add option to insert text in the middle of dimension.

To have an option to have text aligned in the middle of the dimension line, rather than above it.

1698QCAD (main)Feature RequestLowDimensioning - add option to split dimensionsAssigned
0%
Task Description

Dimensioning - add option to split dimensions.

To have an option to split the extension lines if they run over other entities.

1510QCAD (main)Feature RequestLowdimensioning, rounded valuesAssigned
0%
Task Description

Approximation value for dimensioning, i.e. for example:
approximate to .5
measured valure 11.3456 > displayed value 11.5

952QCAD (main)Feature RequestLowDimensions: manually control arrow positionAssigned
0%
3 Task Description

See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.

The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.

756QCAD (main)Bug ReportLowDisplay problem in the Text "Character Map" ...Assigned
0%
1 Task Description

XP/32

Go to:
Text → Special Characters → Others → “Character Map” pops up.
Adjust Zoom to 100% = display problem (not enough space for the single character.

622QCAD (main)Feature RequestLowDisproportianal scaling of arcs, ellipsesAssigned
0%
Task Description

Support disproportional scaling also for arcs, ellipses, other entities, not only lines and polylines with only line segments.

936QCAD (main)Feature RequestLowDisproportional scaling of block referencesAssigned
0%
Task Description

XP/32

... doesn’t works proper at circles and ellipses.

Circles: the scale works only proportional even though I have the options for x and y.
Ellipses: The same but if I play around with the x, y fields it will freeze the scale possibility.

2337QCAD (main)Feature RequestLowDistance information should be available in 2D and 3DAssigned
0%
Task Description

As per https://qcad.org/rsforum/viewtopic.php?f=32&t=9089, I suggest to extend the distance information tools:

* show Delta Z (at least when any of the elements has Z information)
* allow switching between 2D and 3D distance
* maybe allow to show both
* maybe change the text to distinguish between them (”Distance” → “Distance 2D/3D”)

1372QCAD (main)Feature RequestLowDistance Point to Point - option for 'added' distancesAssigned
0%
2 Task Description

It would be useful to have an additional option to be able to count/add up consecutive distances measured with this tool ;)

625QCAD (main)Feature RequestLowDistribute block along spline, polyline, ...Assigned
0%
1 Task Description

See:
http://www.youtube.com/watch?v=27bCgg3zLVA

972QCAD (main)Feature RequestLowDistribute equally option ...Assigned
0%
6 Task Description

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

1470QCAD (main)Feature RequestLowDouble line tool requestAssigned
0%
3 Task Description

I would love to have a ‘Double Line’ tool in QCAD.

For me this would be such a time saver when drawing out building floor plans in QCAD.

2497QCAD (main)Bug ReportVery LowDraw > Circle > 3 Tangents (CT3) fails in some cases wi...Assigned
0%
1 Task Description

Andrew,

See attachment with example:

Solution included on layer ‘Solution’.

Regards,
CVH

2436QCAD (main)Feature RequestLowDraw > Hatch > Hatch from Segments: mark position of op...Assigned
0%
1 Task Description

Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.

Same scenario tested with “Hatch from Selection” (HA) ...
... everything works like a charm ;-)

1666QCAD (main)Feature RequestLowDraw > Line > Relative Angle / Orthogonal: define lengt...Assigned
0%
Task Description

Add option to define length (end point) using mouse pointer.

If reference point is “Middle”, extend line from middle in both directions to mouse cursor (?).

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5205

2159QCAD (main)Bug ReportLowDraw > Polyline > Polyline from Selection: may induce N...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Discovered in 3.25.2.4, reproducible under 3.25.2.7

Draw any open or closed chain of line entities.
Select All.
OC to Polyline.
Step through vertices.

No example file provided because these NaN values are not saved to a file.
More pronounced with lines as with arcs.
Less pronounced when recombining after an explosion.
Some methods clear these to value = void.
Some methods clear these to zero (OR).
Can also occur when adding segments to an existing polyline with OC.

Regards,
CVH

2160QCAD (main)Bug ReportLowDraw > Polyline > Relocate Start Point: fails on polyli...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Origin:
I like to start my CAM paths at low curvature instead starting at high curvature.
Ellipses may explode with the startpoint at the tip. (file Y2)

Documented in 3.25.2.4, reproducible under 3.25.2.7

File included with 4 LayerStates
- Original Ellipses: Y1
- Exploded to polylines (32 segments): Y2
- Direct after XP, OR performs different on the left top one: Y3
- Faulty solutions by OR: Y4 (= saved state)

The results may differ with the saved explosions.

With the file.
Y1
TA
XP
Relocate startpoint with OR to an existing reference (called ‘End’)

Regards,
CVH

1702QCAD (main)Feature RequestLowDraw > Polyline: add boolean operationsAssigned
0%
1 Task Description

Add intersection, union, difference, XOR operations for closed polylines.

1298QCAD (main)Feature RequestLowDrawing Preference; File formatAssigned
0%
1 Task Description

Hi, I get anoyed everytime saving a drawing;

 File Format not recommended.......          [Yes]   ; I know. it's suppose to be in that format!
 Saving to file......                        [OK]    ; I already told you
 Black entities ......bla bla                [OK]    ; I already told you
 Custom colors ...... bla bla                [OK]    ; I already told you

Therefore, Drawing Preferences should start with the file format choice field;

 File Format: R.......

Drawing should be opened and saved in that format without any question. Please.

1911QCAD/CAMFeature RequestLowDrill ToolpathAssigned
0%
Task Description

Hallo Andrew

It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.

2328QCAD (main)Bug ReportVery Lowdrop down, using keyboardAssigned
0%
Task Description

Minor issue!
When using keyboard to initiate the dropdown menus.
I noticed the ALT “D” does not cycle through the headings Draw & Dimension in the same way.
ALT “M” cycles though Modify & Misc or ALT “S” cycles though Select & Snap.
User Name: StanTibbs
E-mail: [email protected]

2300QCAD (main)Feature RequestLowDuplicate layout blocks with contentsAssigned
0%
2 Task Description

Add a tool to duplicate a layout block with contents.

2325QCAD (main)Bug ReportLowdwg file crashes QCADAssigned
0%
Task Description

Regarding to forum post:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8982&p=35836#p35836

dwg loaded in 3.27.1 frees QCAD (no response) and a Win10 PC. Same drawing loaded in 3.26.0 causes no problems. It looks to me that two hatches (handle 198b6, 198ba) are the culprits.
Drawing saved without those hatches opens without any problem in 3.27.1.

TECNOFLEX symbol library.dwg = original file from forum post
TECNOFLEX symbol library_mod.dwg = my modification

2462QCAD (main)Bug ReportLowDWG import issue: m^2 gets weird "\A1"Assigned
0%
Task Description

I’ve opened an existing, old dwg file in the Professional Trial edition, file(1) says it’s “DWG AutoDesk AutoCAD 2004/2005/2006”.
It contains (among other stuff) a floor plan with areas in m^2. A PDF export (from the original software used at the time, probably autocad) shows that this was displayed correctly.
However, in QCAD, I get a “\A1” and a very small number 2 instead. I’ll attach screenshots.

1824dwg2pdfFeature RequestLowdwg2pdf does not obey frozen layers in paper-space view...Assigned
0%
Task Description

We currently have a paper-space using two viewports with different layers from the model-space frozen. Unfortunately in the pdf output the layers which are frozen show up.
dwg2pdf should obey the specific frozen layer for each viewport

1700dwg2pdfFeature RequestLowdwg2pdf: output multiple layoutsAssigned
0%
Task Description

Add support to specify multiple blocks (layouts) to output (one per page).

1542dwg2svgFeature RequestLowdwg2svg: add switch to show only given layer(s)Assigned
0%
Task Description

Implement a command line switch to only show a list of given layers for dwg2* command line tools.

1008QCAD (main)Bug ReportLowDXF (dxflib) compat issuesAssigned
0%
Task Description

Git head as well as 3.4.5 (trial), both with dxflib 3.3.4.0.

Start up QCAD, (with existing or new configuration, doesn’t seem to matter), “Save as” the completely empty drawing, choose “R15 (dxflib)” on Pro (only this one is available on community), save drawing.

Fire up AutoCAD 2000, try to load the empty drawing just saved.

Result:

DXF read error
Error in APPID Table
DXF read error on line 941.
Invalid or incomplete DXF input -- drawing discarded.

Problem not present when a completely empty drawing saved using Teigha in R15 format is opened (ie. it just results in an empty drawing in AutoCAD 2000). Problem is also not present when saving an existing drawing with Pro (trial) with Teigha and opening it in AutoCAD 2000. Problem does present when trying to open a dxflib-saved drawing in AutoCAD 2000.

Empty drawings created with both dxflib 3.3.4.0 in QCAD Pro 3.4.5 trial and Teigha whatever in QCAD Pro trial 3.4.5 are attached. (Community Git 135fd0 is identical to Pro - same dxflib version.)

976dxflibBug ReportLowDXF import errors related to hatches, textsAssigned
0%
Task Description

See:
http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677

747QCAD (main)Feature RequestLowDXF import: dimension labelAssigned
0%
Task Description

Add support for custom dimension labels created in 3rd party applications. Such labels may contain text that is stripped by QCAD.

1920QCAD (main)Feature RequestVery LowEdit > Application Preferences: Add preference to disab...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447

1586QCAD (main)Feature RequestLowEdit > Application Preferences: Use different color for...Assigned
0%
Task Description

Add preference to use a single, configurable color for all locked layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4879#p17953

1489QCAD (main)Feature RequestLowEdit > Drawing Preferences > Dimensions: Add option to ...Assigned
0%
2 Task Description

It would be extreamly useful to have an option to either use - or not use leader lines in the standard horizontal/vertical dimension line tools, some of the drawings I’m working on need the ‘standard’ looking dimensions with leader lines and some don’t. its a real pain to have to select - explode and delete all the leaders I don’t need.

Hoping for an option

Regards

Clive

1093QCAD (main)Feature RequestLowEdit Layer attributes by double-clicking on entry in la...Assigned
0%
2 Task Description

When double clicking on an entry in the layer list just nothing happens.
I would prefer if this would directly open the layer attributes dialog to change color/name etc.

798QCAD (main)Feature RequestLowelaborate on purge toolAssigned
0%
1 Task Description

Modify the “purge layer” tool to preserve empty layers with a locked status.
see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386

1976QCAD (main)Feature RequestLowEnvelope at offset to a poly toolAssigned
0%
1 Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?t=6650

2287QCAD (main)Feature RequestVery LowEvaluate draw order for preference "Prevent white-on-wh...Assigned
0%
Task Description

The Application Preference setting “Graphics View - Appearance - Prevent white-on-white/black-on-black display” seems to be a global setting that doesn’t take the draw order into account. For example: With the setting enabled, it prevents creating a white hatch of a higher draw order on top of a larger, colored hatch with lower draw order (background). The preference does not seem to evaluate if the object is truly drawn as “white-on-white”.

With the preference enabled, setting the object color as “white” will set the “white” color label, but the object color actually stays black. Its hard to determine why it happens in that case.

Is it possible to let the global preference setting be applied to objects after evaluation of the draw order, and determine if the object actually is a true case of white-on-white?

My workaround: Disable the preference setting (I think it is default = on), and only enable it for ad-hoc checks of hidden and overlooked objects.

2398QCAD (main)Feature RequestLowExcessive AutosaveAssigned
0%
Task Description

Autosave currently updates the backup file indefinitely regardless of whether the drawing has been modified since the last autosave. Request only update autosave following additional edits since last autosave.

173QCAD (main)Feature RequestLowexplode text to lettersAssigned
0%
1 Task Description

implement

2378dwg2svgFeature RequestLowExport attributes on block references as namespaced XML...Assigned
0%
Task Description

dwg2svg supports exporting the layer name (and probably others?) as namespaced XML attributes (`qs:layer`) which works well.
However I’d like to export block attributes as well, as seen on the following screenshot:

https://imgur.com/a/wUd0adE

(...so `ROOM_NAME` would become `qs:ROOM_NAME=”Eötvös terem”` on the respective XML element).

Thanks in advance.

1555QCAD (main)Feature RequestLowExport list of points.Assigned
0%
1 Task Description

Hello
It would be great when you can add a function to export a selected object as a list of points.
Is it possible to add?

Autodes DWG TrueView 2017 has this function and it is very useful.
Here you can see a screenshot of this function.

1090QCAD (main)Feature RequestLowExport only selected layers to SVG and/or export each l...Assigned
0%
2 Task Description

When exporting to SVG it would be helpful if there was a selection of layers to export.
E.g. when selecting only layer A in the SVG export dialog, only the objects located/displayed on layer A would be exported to SVG.

As an alternative or additional export feature, there could be an option to export each (non-empty) layer to a separate SVG in one step.
The layer names could be used as (part of the) default file names during the export.
E.g. Layer A of file XYZ would be exported to “XYZ_A.SVG” while layer B would be exported to “XYZ_B.SVG” etc.

1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

2191QCAD (main)Feature RequestLowExtend the functionality of the Reorder toolAssigned
0%
3 Task Description

Add functions to the Reorder tool, similar to the functions of the counter tool, undo last step and start at any number, allowing corrections and restarting the tool part way through.

See the discussions at https://qcad.org/rsforum/viewtopic.php?f=32&t=8170

2446QCAD (main)Feature RequestLowExtending dimension line beyond extension line when usi...Assigned
0%
1 Task Description

I would like the ability to extend dimension lines beyond the extension line when using tick marks. Images are attached and posted here: https://qcad.org/rsforum/viewtopic.php?f=31&t=9785

776QCAD (main)Feature RequestLowExtra ' isometric' buttons for using Line from Angle.Assigned
0%
2 Task Description

When working with the isometric grid (in any projection - Top, Right, Left) and drawing from ‘scratch’ as it were, without using the projection tools - I find myself using ‘Line from Angle’ the most.

It would be extreamly useful to be presented with two extra buttons when using this tool, a 30 degree button and a -30 degree button, this way I wouldn’t need to keep typing in the angle difference here.

Regards

Clive

951QCAD (main)Feature RequestLowExtra Option for Block attributes ...Assigned
0%
1 Task Description

It would be nice to have the possibility to control the automatic Text orientation in Block attributes.
Something what would work like the DIM restriction: I can read the text horizontal and/or from the right side of the drawing sheet.

Right now I have the feeling that the Text orientation is dependent on the tool what I even use.
Different tools = different outcomes.

788QCAD (main)Feature RequestLowExtra option to detect duplicates only in user defined ...Assigned
0%
2 Task Description

It would be very useful to have an extra option to only detect duplicates within a user defined area.

Showing tasks 151 - 200 of 519 Page 4 of 11<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing