QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  asc
2325QCAD (main)Bug ReportLowdwg file crashes QCADAssigned
0%
Task Description

Regarding to forum post:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8982&p=35836#p35836

dwg loaded in 3.27.1 frees QCAD (no response) and a Win10 PC. Same drawing loaded in 3.26.0 causes no problems. It looks to me that two hatches (handle 198b6, 198ba) are the culprits.
Drawing saved without those hatches opens without any problem in 3.27.1.

TECNOFLEX symbol library.dwg = original file from forum post
TECNOFLEX symbol library_mod.dwg = my modification

2330QCAD/CAMFeature RequestLowToolpath optimization optional (on/off)Assigned
0%
2 Task Description

Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033

2331QCAD/CAMFeature RequestLowTabs: Control over on which particular profile used.Assigned
0%
Task Description

Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.

It would be nice to have some kind of control on which profile a tab has to be used.

2336QCAD (main)Feature RequestLowAdd command to go back to previous nested blockAssigned
0%
Task Description

“em” just always goes back to the main drawing. But for nested blocks, when jumping from edit mode of one block to the next nested block, it would be helpful to have some “ep” to go back to the previous block.

This was discussed at the forums...

2337QCAD (main)Feature RequestLowDistance information should be available in 2D and 3DAssigned
0%
Task Description

As per https://qcad.org/rsforum/viewtopic.php?f=32&t=9089, I suggest to extend the distance information tools:

* show Delta Z (at least when any of the elements has Z information)
* allow switching between 2D and 3D distance
* maybe allow to show both
* maybe change the text to distinguish between them (”Distance” → “Distance 2D/3D”)

2338QCAD (main)Feature RequestLowShow non-QCAD custom XDATA optionallyAssigned
0%
1 Task Description

QCAD (before version 3.27?) used to show some custom XDATA, e.g. tag 1000, even for application names that are not “QCAD”, which for me was useful, so it’s somewhat of a regression. (I think it was broken when selecting multiple items, maybe that’s why it was removed.)

I suggest to bring that feature back, but maybe show it only when a single element is selected if that’s easier.

(As a workaround/hack I guess it would be possible to rewrite the required information as QCAD compatible XDATA externally I guess.)

2339QCAD (main)Feature RequestLowBlock List multible selectionAssigned
0%
Task Description

It would be nice to have the possibility to select multiple blocks with Shift and/or CTRL + mouse like the Layer List to use a delete etc command on all selected blocks at once.

2340QCAD (main)Feature RequestLowLayer List / Block List: Link minus icon to keyboard de...Assigned
0%
Task Description

Referring to Layer List / Block List: It would improve the workflow if the Delete key on the keyboard would be linked to the minus icon (Delete). The command ER is also ignored in both list.

2341QCAD (main)Feature RequestLowmanage image referencesAssigned
0%
1 Task Description

QCAD. ver. 3.27.1.0 (3.27.1)
Qt version: 5.13.2
Architecture: x86_64
OS Windows 11

It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again.
I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)

2347QCAD (main)Bug ReportLowModify / Clip to rectangle issueAssigned
0%
1 Task Description

The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.

2348QCAD (main)Bug ReportLowtext in simple format do not save position after save t...Assigned
0%
1 Task Description

How to reproduce the bug:
1-open a new file
2-select text tool, simple text(one line,no formatting) and alignment in base-left
3-write some text in somewhere position in the draw, repeat this in others positions
4-save the file in .dxf R15 [2000/LT2000] (dxflib) format
5-close Qcad
6-open the saved file, the writhed text lose original position and now all the text have 0,0 position

2351QCAD (main)Feature RequestLowFile Thumbnail PreviewAssigned
0%
1 Task Description

Could we please implement the ability to display file contents in the file explorer. This would make it easier to decide which files to open.

2353QCAD (main)Feature RequestLowadd theme folder to a local shared pathAssigned
0%
5 Task Description

Would it be possible to add Qcad’s theme folder to the local shared path, for example this would be /home/username/.local/share/QCAD/QCAD/themes for Linux. I know this works well for line types and would be extremely helpful for themes.

2354QCAD (main)Feature RequestLowcopy-paste between two QCAD instancesAssigned
0%
2 Task Description

Hello,

I’ve quite often the task to transfer changes from one set of drawings to another (similar) set.
My ideal setup would be to open one set in one window and the other set in another window.
Both windows would be arranged side-by-side (larger monitor).
Changes would be copy-pasted from one set to the other.

From #2352 I’ve learned that there is a command-line option to achieve this.

Unfortunately it’s not possible to copy-paste between these instances.

And yes, it’s important to do this in two windows to see both versions at the same time.
So, tabs are not the answer.

It’s also ok if i could detach a tab from one instance and arrange it aside of the main window (like the property editor).
Than all data transfers would happen inside the same instance.

Best regards,
Klaus

2370QCAD (main)Feature RequestLowRetain global width / segment widths when reversing pol...Assigned
0%
1 Task Description

Andrew,

Changing orientation of a polyline with RV or by changing it in the Property Editor clears the global width value.

Single line pieces as polyline default to CCW.
Still the global width is cleared when trying to set them CW.

I didn’t update since 3.27.0 but reading this topic I suppose it still is valid.
Related: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9362

Regards,
CVH

2371QCAD (main)SuggestionLowInclude more properties for polylines in the Selection ...Assigned
0%
1 Task Description

Andrew,

Not OS or Version depending.

We can’t filter on some specific properties of polylines.

Handy would be:
- Global Width
- Orientation

Specific:
- Polyline Pattern
But I don’t really search for them ... For some post-op I just need them all to be set to ‘No’.
- # of vertices
Filtering the complex from the more simple ones.
- Including Bulges or not
To seperate polylines with arc segments form others.
There some operations that don’t really work with bulging.
- Z values and/or global Z
This would make sense for some but filtering on Z is not common under QCAD as it is 2D.

Regards,
CVH

2374QCAD/CAMFeature RequestLowAdd Spindle Speed to Toolpath DialogAssigned
0%
1 Task Description

When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.

Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.

Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?

Many thanks’, and best regards.

2378dwg2svgFeature RequestLowExport attributes on block references as namespaced XML...Assigned
0%
Task Description

dwg2svg supports exporting the layer name (and probably others?) as namespaced XML attributes (`qs:layer`) which works well.
However I’d like to export block attributes as well, as seen on the following screenshot:

https://imgur.com/a/wUd0adE

(...so `ROOM_NAME` would become `qs:ROOM_NAME=”Eötvös terem”` on the respective XML element).

Thanks in advance.

2381QCAD (main)Bug ReportLowCrash when modifying toolbar settingsAssigned
0%
Task Description

QCAD Professional 3.27.6.0 running on macOS 12.4 (21F79)

QCAD sometimes crashes when I am adding or removing items from toolbars. It isn’t consistent and I haven’t seen a pattern about which items trigger the crash. It has happened while editing different files, but I’ve attached attached a very simple example and two crash reports

2386QCAD Community EditionBug ReportLowLabel "Linear format" missing in Property EditorAssigned
0%
Task Description

no task description

2387QCAD (main)Feature RequestLowOpen Drawings on Layout Block by DefaultAssigned
0%
Task Description

As the layout block contains the drawing sheet, the number, the viewports, it’s the presentable part of the drawing.

Maybe QCAD could be able to save on the dxf the “last state” of the drawing. If I saved on the Model and closed, it would open on Model... and if my last save was on the Layout”n”, it would open on Layout “n”.

At least on my work area, when opening a finished drawing, it’s the ideal for it to be opened in a Layout (if it was the active block while saving).

2390QCAD (main)Feature RequestLowPlease add U.S. Survey Feet to the Unit / convert listAssigned
0%
1 Task Description

Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good. ;-)

See also:

https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245

2391QCAD Community EditionBug ReportLowFix Dark Theme for LinuxAssigned
0%
Task Description

The dark theme for Linux is broken:

- Some icons have dark background (expected) and black foreground color (that should be replaced by white of very light gray)
- Some icons have light background (not cohesive with the theme).
- The command history shows dark blue font on dark gray background.
- The grid’s ruler shows black font over dark background for the numbers.
- The icons folder is missing in the GitHub repository, but other themes have that folder.
- The general icons (open, save, and so on) are not dark theme friendly. A better approach for maybe all the themes would be to use something like the breeze icons pack for LibreOffice, and it will have the added benefit of making the app look more modern.

The icons issue is the biggest problem. They should probably replace the black color for white or very light gray. Even the red accent color is not ideal for dark themes, is not the main issue.

Attached is an image that show the problems and another that shows LibreOffice with the Dark Breeze theme for reference.

2396QCAD (main)Bug ReportLowMissing Dim/Label Format information from an extern wri...Assigned
0%
Task Description

Please refer to forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9556

The attached example file is written with a third party CAD program in R15.
Opened in QCAD CE all Dim/Label information are available.
If I load this drawing in QCAD Pro the Dim/Label information are lost.

If I load and save the example drawing with CE the newly written dxf is readable in Pro without any issue.

2397QCAD (main)Bug ReportLowPost processor "LaserGBRL (offset) [mm] fails at tabsAssigned
0%
1 Task Description

Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.

Forum topic:
https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495

2398QCAD (main)Feature RequestLowExcessive AutosaveAssigned
0%
Task Description

Autosave currently updates the backup file indefinitely regardless of whether the drawing has been modified since the last autosave. Request only update autosave following additional edits since last autosave.

2405QCAD Community EditionBug ReportLowDimension scaling not workingAssigned
0%
Task Description

I’m using QCAD Community Edition 3.27.7 on Windows 11.

When I started my drawing, I was able to change the size scale factor of (existing) dimensions using “Edit/Drawing Preferences/Dimension/Dimension Settings/Size scale factor”. However, suddenly this feature stopped working and now I cannot switch the dimension scale factor any longer.

I used this feature to be able to adapt the scale factor of the dimensions when printing in different scales.
I.e. all my drawings are in “original” size but when it comes to printing, I print some parts in scale 1:2 (in which case I used to set the size scale factor of the dimensions to 2) and some parts in scale 1:10 (in which case I used to set the scale factor of the dimensions to 10). Using this procedure, the dimensions have the same size (font size, arrow size, gaps etc.) on both drawings.

I have attached the drawing, that shows the described issues.

2406QCAD (main)Bug ReportLowSVG Export incorrect on blocksAssigned
0%
1 Task Description

When using SVG export on a drawing with a block defined, the export is incorrect. Arcs are drawn incorrectly and parts of the block are missing. If that block is exploded, the SVG export is correct. Attached is a block on the lower left and the same block on the lower right after explode. Also attached is the resulting SVG file.
This is not always the case. Some blocks are correctly exported to SVG. The upper row is again a block on the left and the same block exploded on the right. It exports properly.

2416QCAD (main)Feature RequestLowAutomatically set a proper alternating row color for th...Assigned
0%
1 Task Description

Andrew,

When switching from Default to Dark mode the text on alternating rows is hardly visible.
We can customize this color.

It would be easier if a proper default color is set on switching to and back.

Perhaps the user preferences can be remembered.
Perhaps only when the contrast would be affected.

Regards,
CVH

2418QCAD/CAMFeature RequestLowInclude a GroupCustom widget in CAM Toolpath dialogs.Assigned
0%
2 Task Description

Andrew,

Unrelated to OS or QCAD version.

In the postprocessor configuration dialog there is a group box called ‘GroupCustom’.
One can add custom widgets to that, rename it and so on.

Such is not provided in CamProfileToolpathDialog.ui or CamDrillToolpathDialog.ui

It should be possible but we aren’t really able to mix up things with the ‘Message’ QLabel ...
A reserved QGroupBox would do the trick. ;-)

Related topic:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9647

Regards,
CVH

2421QCAD (main)Feature RequestLowMake the preview of Shorten (LE) more visibleAssigned
0%
1 Task Description

Andrew,

When we use Lengthen/Shorten (LE) with a positive amount the result is clearly visible when indicating a side of an entity.
With a negative amount there is seemingly no preview.
It is generated and shown but one can not distinguish it especially with solid lines.

Adding an orthogonal auxiliary preview shape some N pixels long would do the trick. ;-)

Regards,
CVH

2428QCAD (main)Feature RequestLowImplement reversing Leader entities on creation or afte...Assigned
0%
1 Task Description

Andrew,

Usually I point to something to start with.
Sometimes I want to point away from here but then the arrow is where I just clicked.

An option on creation would be nice.
The capability to reverse the Leader orientation afterwards is another method to get it pointing the intended way.

A Leader entity is stored similar as a polyline.
I think it would not be difficult to reverse the basic polyline and update the dimension shape accordingly.

Regards,
CVH

2433QCAD (main)SuggestionLowLock Snap [SQ] fails at snap Middle Manual [SN]Assigned
0%
Task Description

e.g: If I use content out of the clipboard to insert it multiple times into the drawing with using the Middle Manual snap [SN] the snap can’t be locked [SQ] and I have to reactivated the snap again and again for every following insert.
Other snaps like END or CENTER work flawless in this scenario.

2436QCAD (main)Feature RequestLowDraw > Hatch > Hatch from Segments: mark position of op...Assigned
0%
1 Task Description

Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.

Same scenario tested with “Hatch from Selection” (HA) ...
... everything works like a charm ;-)

2446QCAD (main)Feature RequestLowExtending dimension line beyond extension line when usi...Assigned
0%
1 Task Description

I would like the ability to extend dimension lines beyond the extension line when using tick marks. Images are attached and posted here: https://qcad.org/rsforum/viewtopic.php?f=31&t=9785

2448QCAD (main)Feature RequestLowScale lineweight display on model spaceAssigned
0%
1 Task Description

Currently, the model space can display lineweights at scale 1:1
It’s very convenient when drawing small objects that will be printed at scale 1:1 : it makes it easy to anticipate the final aspect of the printed drawing.
But this feature is unusable for architects or users who draw large objects.

Therefore, it would be very useful to have a factor to multiply lineweight display in model space.
For example : if i know my drawing will probably be printed at scale 1:50, i set the value of the lineweight factor to 50.
Then every line would be displayed 50x thicker in model space.

2450QCAD (main)Bug ReportLowFlip Block with Attributes horizontaly failsAssigned
0%
Task Description

A block with Attributes can’t be flipped (Option bar) horizontally. The Attributes will be rotated 180° instead of been mirrored. Other entities in the block flip correctly.
Same block flipped vertically works as expected (Mirrored Attributes).
Same block flipped with FH or MI works as expected. (Mirrored Attributes).

2453QCAD (main)Bug ReportLowControl point Splines - Issue with Closed & Minimal poi...Assigned
0%
1 Task Description

Andrew,
For more detailed description please refer to:
https://www.qcad.org/rsforum/viewtopic.php?f=33&p=40081#p40081

In the included screen grab below, left is when drawn cubic, closed periodic, from 4 points.
Right is when the file is re-loaded.

It is hard to select the incorrect shape when pointing near it ... Probably it is referring to the correct internal shape.
After drawing it explodes to a Null length polyline with 2 identical vertices.

I can’t include the error in a file as it reverts on re-load.

The same issue exist for quadratic, closed periodic, from 3 points.

Regards,
CVH

2456QCAD (main)Feature RequestLowTangent arcAssigned
0%
3 Task Description

It would be great if QCAD could create an arc tangent to another entity without necessity to type a radius.
Just two simple steps:
1. Click the endpoint of another entity to start the arc. The arc is tangent to the starting entity.
2. Click the second point to place the arc.

2457QCAD (main)Bug ReportLowPolyline start / end widths not saved for first segmentAssigned
0%
Task Description
  1. Draw a polyline with a single segment
  2. Set the start and end width of the first vertice / segment (index 0)
  3. Save
  4. Reload
2462QCAD (main)Bug ReportLowDWG import issue: m^2 gets weird "\A1"Assigned
0%
Task Description

I’ve opened an existing, old dwg file in the Professional Trial edition, file(1) says it’s “DWG AutoDesk AutoCAD 2004/2005/2006”.
It contains (among other stuff) a floor plan with areas in m^2. A PDF export (from the original software used at the time, probably autocad) shows that this was displayed correctly.
However, in QCAD, I get a “\A1” and a very small number 2 instead. I’ll attach screenshots.

2467QCAD (main)Bug ReportLowmacOS M1/M2 setup with multiple screens: crash during i...Assigned
0%
Task Description

I sometimes start QCAD Pro on a project and then go do something else after a while, leaving it open in the background.

At least 5 times now it died in this state, in the background, without user activity, giving me the ‘quit unexpectedly’ dialog.

Here’s some part of the log that macOS collects when that happens:

-------------------------------------
Translated Report (Full Report Below)
-------------------------------------

Process:               QCAD-Pro [62952]
Path:                  /Applications/QCAD-Pro.app/Contents/MacOS/QCAD-Pro
Identifier:            org.qcad
Version:               3.28 (3.28.0)
Code Type:             ARM-64 (Native)
Parent Process:        launchd [1]
User ID:               501

Date/Time:             2023-04-15 15:39:31.3443 +0200
OS Version:            macOS 13.3.1 (22E261)
Report Version:        12
Anonymous UUID:        7BF39A64-2E31-A624-4A66-896554C6DEC0

Sleep/Wake UUID:       8D811F79-BAFA-4D25-BDA4-DF99AEE2DE0E

Time Awake Since Boot: 300000 seconds
Time Since Wake:       1 seconds

System Integrity Protection: enabled

Crashed Thread:        0  Dispatch queue: com.apple.main-thread

Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000018
Exception Codes:       0x0000000000000001, 0x0000000000000018

Termination Reason:    Namespace SIGNAL, Code 11 Segmentation fault: 11
Terminating Process:   exc handler [62952]

VM Region Info: 0x18 is not in any region.  Bytes before following region: 105553518919656
      REGION TYPE                    START - END         [ VSIZE] PRT/MAX SHRMOD  REGION DETAIL
      UNUSED SPACE AT START
--->  
      MALLOC_NANO (reserved)   600018000000-600020000000 [128.0M] rw-/rwx SM=NUL  ...(unallocated)

Thread 0 Crashed::  Dispatch queue: com.apple.main-thread
0   QtGui                         	       0x104c3b884 QMacCGContext::QMacCGContext(QPainter*) + 44
1   libqmacstyle.dylib            	       0x1063fe838 0x1063f4000 + 43064
2   libqmacstyle.dylib            	       0x106405fec 0x1063f4000 + 73708
3   QtWidgets                     	       0x1055263e4 QCommonStyle::drawControl(QStyle::ControlElement, QStyleOption const*, QPainter*, QWidget const*) const + 2132
4   libqmacstyle.dylib            	       0x10640379c 0x1063f4000 + 63388
5   QtWidgets                     	       0x105562000 0x1054b4000 + 712704
6   QtWidgets                     	       0x10568c474 QTabBar::paintEvent(QPaintEvent*) + 1584
7   QtWidgets                     	       0x105508f70 QWidget::event(QEvent*) + 132
8   QtWidgets                     	       0x10568bcd4 QTabBar::event(QEvent*) + 736
9   QtWidgets                     	       0x1054bf520 QApplicationPrivate::notify_helper(QObject*, QEvent*) + 272
10  QtWidgets                     	       0x1054c0ffc QApplication::notify(QObject*, QEvent*) + 3396
11  QtCore                        	       0x1065b7570 QCoreApplication::notifyInternal2(QObject*, QEvent*) + 292
12  QtWidgets                     	       0x1054fc214 QWidgetPrivate::drawWidget(QPaintDevice*, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 3312
13  QtWidgets                     	       0x105503890 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 864
14  QtWidgets                     	       0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
15  QtWidgets                     	       0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
16  QtWidgets                     	       0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
17  QtWidgets                     	       0x105503780 QWidgetPrivate::paintSiblingsRecursive(QPaintDevice*, QList<QObject*> const&, int, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 592
18  QtWidgets                     	       0x1054fc314 QWidgetPrivate::drawWidget(QPaintDevice*, QRegion const&, QPoint const&, QFlags<QWidgetPrivate::DrawWidgetFlag>, QPainter*, QWidgetRepaintManager*) + 3568
19  QtWidgets                     	       0x105519aec QWidgetRepaintManager::paintAndFlush() + 3872
20  QtWidgets                     	       0x105519d70 QWidgetRepaintManager::sync() + 252
21  QtWidgets                     	       0x105509410 QWidget::event(QEvent*) + 1316
22  QtWidgets                     	       0x105624f10 QMainWindow::event(QEvent*) + 248
23  QtWidgets                     	       0x1054bf520 QApplicationPrivate::notify_helper(QObject*, QEvent*) + 272
24  QtWidgets                     	       0x1054c0ffc QApplication::notify(QObject*, QEvent*) + 3396
25  QtCore                        	       0x1065b7570 QCoreApplication::notifyInternal2(QObject*, QEvent*) + 292
26  QtWidgets                     	       0x105516800 QWidgetRepaintManager::sendUpdateRequest(QWidget*, QWidgetRepaintManager::UpdateTime) + 604
27  QtWidgets                     	       0x105516540 void QWidgetRepaintManager::markDirty<QRect>(QRect const&, QWidget*, QWidgetRepaintManager::UpdateTime, QWidgetRepaintManager::BufferState) + 1748
28  QtWidgets                     	       0x10551fdcc 0x1054b4000 + 441804
29  QtCore                        	       0x106600ce4 0x106550000 + 724196
30  QtGui                         	       0x1049b47c4 QWindowPrivate::emitScreenChangedRecursion(QScreen*) + 80
31  QtGui                         	       0x1049aa348 QScreen::~QScreen() + 700
32  QtGui                         	       0x1049aa3b0 QScreen::~QScreen() + 12
33  QtGui                         	       0x1049bec7c QWindowSystemInterface::handleScreenRemoved(QPlatformScreen*) + 36
34  libqcocoa.dylib               	       0x103de7d80 0x103db8000 + 195968
35  libqcocoa.dylib               	       0x103de65d0 0x103db8000 + 189904
36  libqcocoa.dylib               	       0x103dfb014 0x103db8000 + 274452
37  QtCore                        	       0x1065c63d8 QMetaMethod::invoke(QObject*, Qt::ConnectionType, QGenericReturnArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument, QGenericArgument) const + 1072
38  libqcocoa.dylib               	       0x103dfe45c 0x103db8000 + 287836
39  CoreFoundation                	       0x18e193240 __CFNOTIFICATIONCENTER_IS_CALLING_OUT_TO_AN_OBSERVER__ + 128
40  CoreFoundation                	       0x18e22ef30 ___CFXRegistrationPost_block_invoke + 88
41  CoreFoundation                	       0x18e22ee78 _CFXRegistrationPost + 440
42  CoreFoundation                	       0x18e164580 _CFXNotificationPost + 704
43  Foundation                    	       0x18f0c19e4 -[NSNotificationCenter postNotificationName:object:userInfo:] + 88
44  AppKit                        	       0x1915834bc __67-[NSWindow _updateSettingsSendingScreenChangeNotificationToScreen:]_block_invoke + 496
45  AppKit                        	       0x1913ff7e0 NSPerformVisuallyAtomicChange + 108
46  AppKit                        	       0x1915832c0 -[NSWindow _updateSettingsSendingScreenChangeNotificationToScreen:] + 96
47  AppKit                        	       0x1916c3ec0 -[NSWindow _screenChanged:] + 136
48  AppKit                        	       0x1916c3e18 -[NSWindow _displayChangedSoAdjustWindows:] + 112
49  AppKit                        	       0x191d3156c -[_NSFullScreenContentController displayChanged] + 28
50  AppKit                        	       0x191dd5834 -[_NSFullScreenSpace displayChanged] + 48
51  AppKit                        	       0x191dd4504 _fullScreenInstanceMovedSpaces + 208
52  SkyLight                      	       0x192da9e34 (anonymous namespace)::notify_datagram_handler(unsigned int, CGSDatagramType, void*, unsigned long, void*) + 888
53  SkyLight                      	       0x1930e9c84 CGSDatagramReadStream::dispatchMainQueueDatagrams() + 228
54  SkyLight                      	       0x1930e9b80 invocation function for block in CGSDatagramReadStream::mainQueueWakeup() + 28
55  libdispatch.dylib             	       0x18df0e874 _dispatch_call_block_and_release + 32
56  libdispatch.dylib             	       0x18df10400 _dispatch_client_callout + 20
57  libdispatch.dylib             	       0x18df1ebf8 _dispatch_main_queue_drain + 928
58  libdispatch.dylib             	       0x18df1e848 _dispatch_main_queue_callback_4CF + 44
59  CoreFoundation                	       0x18e1dfc88 __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 16
60  CoreFoundation                	       0x18e19d4a8 __CFRunLoopRun + 1992
61  CoreFoundation                	       0x18e19c58c CFRunLoopRunSpecific + 612
62  HIToolbox                     	       0x1979d1df4 RunCurrentEventLoopInMode + 292
63  HIToolbox                     	       0x1979d1c30 ReceiveNextEventCommon + 648
64  HIToolbox                     	       0x1979d1988 _BlockUntilNextEventMatchingListInModeWithFilter + 76
65  AppKit                        	       0x1913bbf58 _DPSNextEvent + 636
66  AppKit                        	       0x1913bb0f4 -[NSApplication(NSEvent) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 716
67  AppKit                        	       0x1913af558 -[NSApplication run] + 464
68  libqcocoa.dylib               	       0x103dcd0d8 0x103db8000 + 86232
69  QtCore                        	       0x1065c0994 QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) + 532
70  QtCore                        	       0x1065b7c0c QCoreApplication::exec() + 128
71  libqcadjsapi.dylib            	       0x116ab5648 QCoreApplication_WrapperSingleton::exec() + 24
72  libqcadjsapi.dylib            	       0x11625d1b8 QCoreApplication_WrapperSingleton::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) + 684
73  libqcadjsapi.dylib            	       0x11625d930 QCoreApplication_WrapperSingleton::qt_metacall(QMetaObject::Call, int, void**) + 100
74  QtQml                         	       0x1045e58f8 0x1044b8000 + 1235192
75  QtQml                         	       0x1045e245c 0x1044b8000 + 1221724
76  QtQml                         	       0x1045e0f30 QV4::QObjectMethod::callInternal(QV4::Value const*, QV4::Value const*, int) const + 956
77  QtQml                         	       0x1045fef88 QV4::Runtime::CallProperty::call(QV4::ExecutionEngine*, QV4::Value const&, int, QV4::Value*, int) + 420
78  QtQml                         	       0x10462bc00 0x1044b8000 + 1522688
79  QtQml                         	       0x10462aaec 0x1044b8000 + 1518316
80  QtQml                         	       0x1045a5c18 0x1044b8000 + 973848
81  QtQml                         	       0x1045fef88 QV4::Runtime::CallProperty::call(QV4::ExecutionEngine*, QV4::Value const&, int, QV4::Value*, int) + 420
82  QtQml                         	       0x10462bc00 0x1044b8000 + 1522688
83  QtQml                         	       0x10462aaec 0x1044b8000 + 1518316
84  QtQml                         	       0x1045a5c18 0x1044b8000 + 973848
85  QtQml                         	       0x1045fed60 QV4::Runtime::CallName::call(QV4::ExecutionEngine*, int, QV4::Value*, int) + 388
86  QtQml                         	       0x10462c11c 0x1044b8000 + 1523996
87  QtQml                         	       0x10462aaec 0x1044b8000 + 1518316
88  QtQml                         	       0x1045a2744 QV4::Function::call(QV4::Value const*, QV4::Value const*, int, QV4::ExecutionContext*) + 368
89  QtQml                         	       0x104603dfc QV4::Script::run(QV4::Value const*) + 228
90  QtQml                         	       0x10454a5a0 QJSEngine::evaluate(QString const&, QString const&, int, QList<QString>*) + 336
91  libqcadjsapi.dylib            	       0x11692bf9c RScriptHandlerJs::doScript(QString const&, QList<QString> const&) + 336
92  libqcadcore.dylib             	       0x1036fd5b8 RScriptHandler::autostart(QString const&, QList<QString> const&) + 2000
93  QCAD-Pro                      	       0x102f7d87c main + 4996
94  dyld                          	       0x18dd67f28 start + 2236

Thread 1:: com.apple.CFSocket.private
0   libsystem_kernel.dylib        	       0x18e08aff0 __select + 8
1   CoreFoundation                	       0x18e1c81e8 __CFSocketManager + 636
2   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
3   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 2:: com.apple.NSEventThread
0   libsystem_kernel.dylib        	       0x18e07ff14 mach_msg2_trap + 8
1   libsystem_kernel.dylib        	       0x18e092240 mach_msg2_internal + 80
2   libsystem_kernel.dylib        	       0x18e088b78 mach_msg_overwrite + 604
3   libsystem_kernel.dylib        	       0x18e080290 mach_msg + 24
4   CoreFoundation                	       0x18e19e8b8 __CFRunLoopServiceMachPort + 160
5   CoreFoundation                	       0x18e19d198 __CFRunLoopRun + 1208
6   CoreFoundation                	       0x18e19c58c CFRunLoopRunSpecific + 612
7   AppKit                        	       0x1914e6508 _NSEventThread + 172
8   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
9   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 3:
0   libsystem_pthread.dylib       	       0x18e0bad8c start_wqthread + 0

Thread 4:
0   libsystem_pthread.dylib       	       0x18e0bad8c start_wqthread + 0

Thread 5:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 6:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 7:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 8:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 9:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 10:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 11:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 12:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 13:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 14:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 15:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8

Thread 16:: Thread (pooled)
0   libsystem_kernel.dylib        	       0x18e083710 __psynch_cvwait + 8
1   libsystem_pthread.dylib       	       0x18e0c0574 _pthread_cond_wait + 1232
2   QtCore                        	       0x1067282f4 0x106550000 + 1934068
3   QtCore                        	       0x106727fac 0x106550000 + 1933228
4   QtCore                        	       0x106727ed8 QWaitCondition::wait(QMutex*, QDeadlineTimer) + 108
5   QtCore                        	       0x106722630 0x106550000 + 1910320
6   QtCore                        	       0x10671e374 0x106550000 + 1893236
7   libsystem_pthread.dylib       	       0x18e0bffa8 _pthread_start + 148
8   libsystem_pthread.dylib       	       0x18e0bada0 thread_start + 8


Thread 0 crashed with ARM Thread State (64-bit):
    x0: 0x0000000000000000   x1: 0x000000016ce88f28   x2: 0x000000016ce88f00   x3: 0x000000016ce88f28
    x4: 0x000000016ce88d68   x5: 0x0000000000000011   x6: 0x0000000000000000   x7: 0x000000016ce87ed8
    x8: 0x0000000113f799f0   x9: 0x0000000106418530  x10: 0x0000000000179f41  x11: 0x0000000000219e00
   x12: 0x000000012de03fa8  x13: 0x0000000000000020  x14: 0x000000012de00000  x15: 0x0000000000000020
   x16: 0x0000000104c3bb34  x17: 0x000000012dea34d0  x18: 0x0000000000000000  x19: 0x000000016ce88bd8
   x20: 0x0000000000000000  x21: 0x000000016ce88f28  x22: 0x000000014de58530  x23: 0x000000014de58530
   x24: 0x0000000000000001  x25: 0x0000000000008001  x26: 0x0000000000008000  x27: 0x00000001e9523460
   x28: 0x0000000000000002   fp: 0x000000016ce88ba0   lr: 0x0000000104c3b880
    sp: 0x000000016ce88b40   pc: 0x0000000104c3b884 cpsr: 0x60001000
   far: 0x0000000000000018  esr: 0x92000006 (Data Abort) byte read Translation fault

Binary Images:
       0x102f70000 -        0x102f7ffff org.qcad (3.28) <50923e35-b0f4-33ad-87b5-c80b6e07fb18> /Applications/QCAD-Pro.app/Contents/MacOS/QCAD-Pro
       0x1035cc000 -        0x1039fffff libqcadcore.dylib (*) <68b6cf9d-e03f-30ac-a74f-0fae66240b13> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadcore.dylib
       0x103100000 -        0x1031a3fff libqcadentity.dylib (*) <185c94cd-8860-3723-9c74-185a1b18c0e0> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadentity.dylib
       0x10323c000 -        0x103293fff libqcadgui.dylib (*) <57e28a4d-f6fd-3b3d-9465-702d9b0dbb86> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadgui.dylib
       0x102ff4000 -        0x103003fff libqcadgrid.dylib (*) <2d7b7164-4c14-3ce7-bbe0-49ec38a68fa0> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadgrid.dylib
       0x103050000 -        0x10306ffff libqcadoperations.dylib (*) <c884af96-582c-3be3-a77e-100c27bfbb77> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadoperations.dylib
       0x10308c000 -        0x10309ffff libqcadsnap.dylib (*) <0630cbf2-cbeb-3a02-8fa7-e0c17fdb666c> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadsnap.dylib
       0x103014000 -        0x10301ffff libqcadspatialindex.dylib (*) <d834db84-bb6b-369c-b967-1148a481ed6f> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadspatialindex.dylib
       0x103370000 -        0x1033b7fff libspatialindexnavel.dylib (*) <05a48089-e554-3429-b0c3-eccd0fc9f1f3> /Applications/QCAD-Pro.app/Contents/Frameworks/libspatialindexnavel.dylib
       0x103514000 -        0x103573fff org.qt-project.QtOpenGL (6.4) <6fe5bbb7-45dc-316b-8c8f-4d455fee11ad> /Applications/QCAD-Pro.app/Contents/Frameworks/QtOpenGL.framework/Versions/A/QtOpenGL
       0x1030b4000 -        0x1030dffff org.qt-project.QtSql (6.4) <3974ce4c-632e-3d00-bbd1-088875642482> /Applications/QCAD-Pro.app/Contents/Frameworks/QtSql.framework/Versions/A/QtSql
       0x1032fc000 -        0x103333fff org.qt-project.QtSvg (6.4) <4c4477bd-616f-3de0-912d-934a2b143af2> /Applications/QCAD-Pro.app/Contents/Frameworks/QtSvg.framework/Versions/A/QtSvg
       0x103444000 -        0x10345bfff org.qt-project.QtXml (6.4) <e1e4e15c-d26c-3800-b8f1-c8a792ffec55> /Applications/QCAD-Pro.app/Contents/Frameworks/QtXml.framework/Versions/A/QtXml
       0x1044b8000 -        0x10482ffff org.qt-project.QtQml (6.4) <51bb2e01-4ec1-3719-a2f6-36cf30380e0e> /Applications/QCAD-Pro.app/Contents/Frameworks/QtQml.framework/Versions/A/QtQml
       0x103ea0000 -        0x103fa7fff org.qt-project.QtNetwork (6.4) <2d4bab25-001a-3333-b3db-b95d9aca025f> /Applications/QCAD-Pro.app/Contents/Frameworks/QtNetwork.framework/Versions/A/QtNetwork
       0x103474000 -        0x1034bbfff org.qt-project.QtPrintSupport (6.4) <2c160c73-f509-3e7b-b281-1e17179314d2> /Applications/QCAD-Pro.app/Contents/Frameworks/QtPrintSupport.framework/Versions/A/QtPrintSupport
       0x1054b4000 -        0x105903fff org.qt-project.QtWidgets (6.4) <d4530615-1625-3bd4-ad4f-c808d616fd39> /Applications/QCAD-Pro.app/Contents/Frameworks/QtWidgets.framework/Versions/A/QtWidgets
       0x1048f0000 -        0x104f03fff org.qt-project.QtGui (6.4) <755184d6-c551-391a-b2ed-6413cb06df19> /Applications/QCAD-Pro.app/Contents/Frameworks/QtGui.framework/Versions/A/QtGui
       0x106550000 -        0x1069bbfff org.qt-project.QtCore (6.4) <0039ed8f-97d9-3555-a1fb-c8281b2a9e1c> /Applications/QCAD-Pro.app/Contents/Frameworks/QtCore.framework/Versions/A/QtCore
       0x102fd4000 -        0x102fd7fff org.qt-project.QtConcurrent (6.4) <b2015105-c358-332c-8b3f-5debfd79c737> /Applications/QCAD-Pro.app/Contents/Frameworks/QtConcurrent.framework/Versions/A/QtConcurrent
       0x103d18000 -        0x103d93fff org.qt-project.QtDBus (6.4) <63c9ff9a-567f-3dac-8abc-3c30823ab0c2> /Applications/QCAD-Pro.app/Contents/Frameworks/QtDBus.framework/Versions/A/QtDBus
       0x103db8000 -        0x103e4ffff libqcocoa.dylib (*) <d3d12a1e-d996-3265-885a-a8e474f79f50> /Applications/QCAD-Pro.app/Contents/PlugIns/platforms/libqcocoa.dylib
       0x1063f4000 -        0x106417fff libqmacstyle.dylib (*) <52b5adc6-8fd3-3577-9c61-ed57cfe4032e> /Applications/QCAD-Pro.app/Contents/PlugIns/styles/libqmacstyle.dylib
       0x10dc48000 -        0x110467fff libqcaddwg.dylib (*) <97457f76-7e3d-3eaf-a495-534031592cb6> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcaddwg.dylib
       0x106434000 -        0x1064e7fff org.qt-project.QtCore5Compat (6.4) <8437f179-2c2b-3e52-938f-3a0d3dda4d14> /Applications/QCAD-Pro.app/Contents/Frameworks/QtCore5Compat.framework/Versions/A/QtCore5Compat
       0x109c34000 -        0x109c87fff libqcaddxf.dylib (*) <6b64540e-e48a-3cdb-96f3-d596dcd2c3e6> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcaddxf.dylib
       0x116200000 -        0x11919bfff libqcadjsapi.dylib (*) <3b3a8e88-1c63-3489-8045-f2ddaa719727> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadjsapi.dylib
       0x105464000 -        0x105477fff libqcadstemmer.dylib (*) <7a8fbfa6-eb3a-341b-a3ba-5703dbbdc01d> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadstemmer.dylib
       0x109d18000 -        0x109d4ffff libqcadpolygon.dylib (*) <9f63281b-3e5c-3eaa-97a5-206e21f5d899> /Applications/QCAD-Pro.app/Contents/Frameworks/libqcadpolygon.dylib
       0x109e7c000 -        0x109edffff org.qt-project.QtUiTools (6.4) <516ccc55-f406-3440-b0e8-9e02016a67db> /Applications/QCAD-Pro.app/Contents/Frameworks/QtUiTools.framework/Versions/A/QtUiTools
       0x106508000 -        0x10650ffff org.qt-project.QtOpenGLWidgets (6.4) <41848e91-ab63-32f6-b910-fd0bb41ad833> /Applications/QCAD-Pro.app/Contents/Frameworks/QtOpenGLWidgets.framework/Versions/A/QtOpenGLWidgets
       0x105440000 -        0x105447fff libconcavehull.dylib (*) <d837fe15-b71a-3baa-8e53-a5368e9a6340> /Applications/QCAD-Pro.app/Contents/Frameworks/libconcavehull.dylib
       0x10a43c000 -        0x10a887fff libqcadpdf.dylib (*) <093902bd-646d-3997-a16d-f2f07180189c> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadpdf.dylib
       0x10b0a4000 -        0x10b7a7fff libqcadproscripts.dylib (*) <d8cdf77e-e618-3ae8-bb92-42999537eb7e> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadproscripts.dylib
       0x10c3ac000 -        0x10cf67fff libqcadscripts.dylib (*) <8018c668-8fb9-3b03-8a2e-ebae0dbc23c8> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadscripts.dylib
       0x109cc0000 -        0x109cd3fff libqcadshp.dylib (*) <ab708ab4-c3a9-3758-84fc-4f0ff08ff60d> /Applications/QCAD-Pro.app/Contents/PlugIns/libqcadshp.dylib
       0x106524000 -        0x10652bfff libqgif.dylib (*) <fabce6ac-714a-3884-bd73-6faf33bbd4d2> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqgif.dylib
       0x109d70000 -        0x109d77fff libqwbmp.dylib (*) <dc542b64-fd8e-30ba-864f-099d1e5a788b> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqwbmp.dylib
       0x109d88000 -        0x109df3fff libqwebp.dylib (*) <275f6c12-b594-3ec1-8002-afae818a8deb> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqwebp.dylib
       0x109e08000 -        0x109e0ffff libqico.dylib (*) <c39c4792-e821-3d0e-a51e-4c91092b2cbf> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqico.dylib
       0x109e20000 -        0x109e27fff libqmacheif.dylib (*) <28e973af-8681-333a-8e06-ca0ef139c6f1> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqmacheif.dylib
       0x10af88000 -        0x10afc7fff libqjpeg.dylib (*) <4a19d30b-c91f-3c5e-93e6-313b73aded30> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqjpeg.dylib
       0x10afdc000 -        0x10b03bfff libqtiff.dylib (*) <ebd99856-9f3e-374d-adec-78591b8e5ecb> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqtiff.dylib
       0x109e38000 -        0x109e3ffff libqsvg.dylib (*) <55448c8b-cdbb-3509-8e76-498a4e6909c1> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqsvg.dylib
       0x109e50000 -        0x109e57fff libqicns.dylib (*) <fb8078bc-26e3-3404-9712-2820f6dccc99> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqicns.dylib
       0x10a348000 -        0x10a34ffff libqtga.dylib (*) <ae8c892d-3d68-32e2-823e-02d20a1273ae> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqtga.dylib
       0x10a360000 -        0x10a367fff libqmacjp2.dylib (*) <3a65cf03-f572-371d-813a-469eedc9151f> /Applications/QCAD-Pro.app/Contents/PlugIns/imageformats/libqmacjp2.dylib
       0x1054a0000 -        0x1054abfff libobjc-trampolines.dylib (*) <80f14f3d-d099-3693-a8e0-eb9a526b1790> /usr/lib/libobjc-trampolines.dylib
       0x10dc14000 -        0x10dc1ffff libqsvgicon.dylib (*) <59fc1d66-aaf2-3b22-8dd8-2eca5e04bf88> /Applications/QCAD-Pro.app/Contents/PlugIns/iconengines/libqsvgicon.dylib
       0x113748000 -        0x113757fff libqcadcustomwidgets.dylib (*) <8f944d85-4001-384d-befb-d6c2c9fe74c2> /Applications/QCAD-Pro.app/Contents/PlugIns/designer/libqcadcustomwidgets.dylib
       0x18e11f000 -        0x18e5f8fff com.apple.CoreFoundation (6.9) <b4fdaece-9727-3969-b014-27f7f24c8e01> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
       0x18f0b8000 -        0x18fa7dfff com.apple.Foundation (6.9) <b7d67e5a-dce2-3f6b-b2b8-895a3669e3ec> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
       0x191383000 -        0x192291fff com.apple.AppKit (6.9) <cc3e5215-4cd7-364c-8750-6eb7002720ce> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
       0x192d9f000 -        0x1931c7fff com.apple.SkyLight (1.600.0) <e3d1dd9e-fa1b-332e-86ba-cc2915276118> /System/Library/PrivateFrameworks/SkyLight.framework/Versions/A/SkyLight
       0x18df0c000 -        0x18df53fff libdispatch.dylib (*) <8e87dc0e-a570-3933-b37d-5e05ad516206> /usr/lib/system/libdispatch.dylib
       0x1979a1000 -        0x197cd4fff com.apple.HIToolbox (2.1.1) <5f34bbf5-653a-31a5-b4b3-0a02c91ab488> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox
       0x18dd62000 -        0x18ddf053b dyld (*) <ac277a36-1808-327a-8761-cca585421212> /usr/lib/dyld
       0x18e07f000 -        0x18e0b8fe7 libsystem_kernel.dylib (*) <7acbd9bc-d056-310e-858d-81b116cf6d28> /usr/lib/system/libsystem_kernel.dylib
       0x18e0b9000 -        0x18e0c5fff libsystem_pthread.dylib (*) <b401cfb3-8dfe-32db-92b3-ba8af0f8ca6e> /usr/lib/system/libsystem_pthread.dylib
               0x0 - 0xffffffffffffffff ??? (*) <00000000-0000-0000-0000-000000000000> ???

External Modification Summary:
  Calls made by other processes targeting this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
  Calls made by this process:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0
  Calls made by all processes on this machine:
    task_for_pid: 0
    thread_create: 0
    thread_set_state: 0

VM Region Summary:
ReadOnly portion of Libraries: Total=1.4G resident=0K(0%) swapped_out_or_unallocated=1.4G(100%)
Writable regions: Total=5.5G written=0K(0%) resident=0K(0%) swapped_out=0K(0%) unallocated=5.5G(100%)

                                VIRTUAL   REGION 
REGION TYPE                        SIZE    COUNT (non-coalesced) 
===========                     =======  ======= 
Accelerate framework               256K        2 
Activity Tracing                   256K        1 
CG backing stores                 7680K        8 
CG image                           496K       22 
ColorSync                          624K       28 
CoreAnimation                      240K       15 
CoreGraphics                        48K        3 
CoreUI image data                 3584K       26 
Foundation                          48K        2 
JS VM Gigacage                    76.0M       19 
JS VM Isolated Heap               23.2M       22 
JS VM Isolated Heap (reserved)    2048K        1         reserved VM address space (unallocated)
Kernel Alloc Once                   32K        1 
MALLOC                             3.1G      160 
MALLOC guard page                  192K        9 
MALLOC_MEDIUM (reserved)           2.0G       17         reserved VM address space (unallocated)
MALLOC_NANO (reserved)           256.0M        1         reserved VM address space (unallocated)
STACK GUARD                       56.3M       17 
Stack                             16.5M       17 
VM_ALLOCATE                        624K       28 
__AUTH                            1366K      290 
__AUTH_CONST                      21.2M      487 
__CTF                               824        1 
__DATA                            6428K      527 
__DATA_CONST                      30.6M      539 
__DATA_DIRTY                      1488K      168 
__FONT_DATA                        2352        1 
__INFO_FILTER                         8        1 
__LINKEDIT                       850.3M       51 
__OBJC_RO                         66.2M        1 
__OBJC_RW                         2011K        1 
__TEXT                           568.2M      554 
dyld private memory                320K        4 
mapped file                      480.4M       47 
shared memory                      960K       19 
===========                     =======  ======= 
TOTAL                              7.5G     3090 
TOTAL, minus reserved VM space     5.3G     3090 
2471QCAD (main)Feature RequestLowTool request: Arc - 2 Tangents and radius ...Assigned
0%
2 Task Description

... inclusive trim option ;-)

I’m already able to use the Circle tool “2 Tangents and radius” to accomplish this task but it is a lot of break out etc. action needed to clean the shape afterward.

2478QCAD (main)Feature RequestLowMake RMathLineEdit unit awareAssigned
0%
1 Task Description

Andrew,

Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10094

When entering 1’ 1’‘ in an input field.
- As the size of the rectangle in the topic
- As the length property of a line selected in the drawing
- ....

Returns 13 in a drawing in mm.
And also in a drawing in inch what turns out to be correct.
But also in a drawing in foot.

Similar, entering 1’ with a drawing in kilometers it returns 12 units = 12 kilometers.

Regards,
CVH

2482QCAD (main)Bug ReportLowRShape::getIntersectionPointsCC still failing for touch...Assigned
0%
1 Task Description

Andrew,

Referring to this forum post:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10152

With radii 1341.35667735 and 26 the relative tolerance is 0.00683678 and exceeds the former used fixed tolerance of 1e-4.

These arcs will then be considered to be tangent and the intersection point is 0.31024 units to the left of where we expect it.

Implemented: https://github.com/qcad/qcad/commit/77ae3e4518cc34f178779d2d2c724adcf80c229d#diff-dcc4e31eaeaed5a047f65dbce4ddda4bcd4d604e9e1005ee8481ded273768449

Updated: https://github.com/qcad/qcad/commit/071b60acd1176e6301bf6b6fcf716684221a97e8#diff-dcc4e31eaeaed5a047f65dbce4ddda4bcd4d604e9e1005ee8481ded273768449

I had already expressed my reserves on the relative tolerance but that was already a better solution for small arcs:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8775&p=34907#p34907

We could limit the tolerance by:
A- The smallest of the fixed and the relative.
B- A relative tolerance based on R2 there circle 1 is forced to be the larger one.

This will never account for the position in the plane.
At a certain point the tolerance will be less than the accuracy/certainty of the values.

Regards,
CVH

2483QCAD (main)Bug ReportLowFile > Open: MLeaders with text not importedAssigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10159

2498QCAD (main)Bug ReportLowLight/dark mode UI colours depend on OS theme when QCAD...Assigned
0%
1 Task Description

On macOS 14.1 and QCAD 3.28.2, the state of the OS (light or dark theme) affects some of the QCAD colour palette for the life of the session. So far I’ve noticed the problem with the keyboard shortcuts in tooltips and text in the command line output, but there may be other instances of the problem.

To reproduce:

1. Set the OS to light mode.

2. Start QCAD. Note the keyboard shortcuts in the tooltips are optimised for a light palette.

3. With QCAD still running, switch the OS to dark mode.

4. Note that while most of the QCAD interface switches to a dark mode palette, the keyboard shortcuts in the tooltips do not.

A similar behaviour is observed when starting from dark mode and switching to light mode.

I hope that makes sense. See attached screenshots for examples.

2500QCAD (main)Bug ReportLowQcad 3.28.2 alters color of adjacent text, if certain u...Assigned
0%
Task Description

Qcad alters color of adjacent text, if certain unicode characters are used.

Version:
3.28.2.0 (3.28.2)
Internet:
QCAD.org
Build Date:
Aug 30 2023
Revision:
a8039fc
Qt Version:
5.13.2
Architecture:
x86_64
Compiler:
MSVC++ 14.0 (2015)

Flytracker appears to have the same problem, as this report was rejected when I inserted the same characters into the title. Query {SELECT tag_id FROM `flyspray_list_tag` WHERE (project_id=0 OR project_id=?) AND tag_name LIKE ? ORDER BY project_id} with params {1,} Failed! (Illegal mix of collations (utf8_unicode_ci,IMPLICIT) and (utf8mb4_general_ci,COERCIBLE) for operation ‘like’)

2506QCAD/CAMFeature RequestLowInclude arc segmentation for 'milling' On-Path.Assigned
0%
3 Task Description

Related forum topic:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10468

For ‘milling’ on path it doesn’t consider

this.arcInterpolation = true

in the custom postprocessor nor the checked option in the CAM Configuration Dialog.

As far as detected the CamArcInterpolation checkbox of the CAM Configuration Dialog is unrelated to the this.arcInterpolation in the postprocessor.

Regards,
CVH

2507QCAD/CAMFeature RequestLowAdd Toolpath from LayerAssigned
0%
1 Task Description

I’ve been able to make this work as proof of concept very easily, but many of the functions are inaccessible/difficult to override from post-processors.

Desired functionality:

1) Enable “Add Profile Toolpath” UI elements all the time (remove setRequiresSelection)
2) CAM Profile Toolpath Dialog: Drop-down menu of available Layers. First option “By Selection Only” 3) “By Selection Only” continues to pass EntityIds of selected objects (existing functionality)
4) Choosing an active Layer will use the Layer as source of EntityIds
5) Any changes to Entities on a Layer will result in those new/removed/changed objects being re-generated without having to manually select and update the tool paths. Either do not recover list of EntityIds from the ToolpathBlock, and instead use “live” each time it’s regenerated, or additional functionality to determine if a LayerId is associated with the Toolpath, and then lookup EntityIds.

I assume the persistence of the Layer selection would be available within the Toolpath, so that it will automatically update EntityIds every time a Toolpath is regenerated, without having to select Entities and updating the toolpath manually.

For large projects, being able to force select objects based upon layer dramatically reduces mistakes and speeds up the workflow.

Thanks

Showing tasks 451 - 500 of 519 Page 10 of 11<<First - 7 - 8 - 9 - 10 - 11 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing