QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  ascSummaryStatusProgress
735QCAD (main)Bug ReportLowAngle dimensioningAssigned
0%
Task Description

See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread

736QCAD (main)Bug ReportLowsnap tool menu is shown before specifiv tool menuAssigned
0%
Task Description

When creating a new file, selecting the e. g. line tool at first opens the linemenu and the snap tool menu as expected. After clicking on the back button twice (going back to the main menu) and selecting the e. g. circle menu, the snap tool menu is shown instead of the circle menu. Instead the circle menu is shown after pressing the back button again.

This only happens when clicking on the back button, but with any tool menu seleected. Pressing escape to go back does not show this problem.

QCAD is running on Mac OS Mountain Lion.

753QCAD (main)Bug ReportLowPaste Preview confusing ....Assigned
0%
Task Description

If I paste something from the clipboard to a drawing the scales of dims are wrong in the preview.

It is difficult to place it right with a confusing preview of that what I have to place ... ;-)

754QCAD (main)Bug ReportLowAdding or removing additional viewports - gives unwante...Assigned
0%
Task Description

Windows 7-64
3.0.7
When adding or removing additional viewports,an extra unnecessary window of the viewport is created.

756QCAD (main)Bug ReportLowDisplay problem in the Text "Character Map" ...Assigned
0%
1 Task Description

XP/32

Go to:
Text → Special Characters → Others → “Character Map” pops up.
Adjust Zoom to 100% = display problem (not enough space for the single character.

772QCAD (main)Bug ReportLowIsometric grid: toggle buttons not updatedAssigned
0%
Task Description

- Switch isometric grid off
- Switch isometric grid on using drawing preferences
- Tool buttons don’t reflect correct status

794QCAD (main)Bug ReportLowApplying Solid grid lines - not workingAssigned
50%
Task Description

Windows
3.0.8
Application preferences > Graphics View > Appearance - Solid grid lines doesn’t change anything?

864QCAD (main)Bug ReportLowTemplate Preview/Info doesn't shows the sheet orientati...Assigned
0%
Task Description

“Create New Drawing from Template” Browser can’t readout the Page orientation ...

879QCAD (main)Bug ReportLowAutosave function not working if file is opened directl...Assigned
0%
Task Description

If a file is opened by clicking on it in an open ZIP archive, autosave will not work.

Linux Mint -64

Autosave function not working, error warning given instead!

893QCAD (main)Bug ReportLowLibrary Browser - Edit Library Item - opens drawings al...Assigned
0%
Task Description

Library Browser - Edit Library Item - opens drawings always with grid.

- If I switch between opened drawings back and forth the grid will disappear ....
- If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....

Just Cosmetic ... ;-)

948QCAD (main)Bug ReportLowmainwindow example segfaultsAssigned
0%
Task Description

As far as I can tell, it never worked.

#0  0x0000000000490527 in QFormInternal::domPropertyToVariant ()
No symbol table info available.
#1  0x000000000042aea9 in QFormInternal::QAbstractFormBuilder::toVariant ()
No symbol table info available.
#2  0x00000000004498a6 in QFormInternal::QFormBuilder::applyProperties ()
No symbol table info available.
#3  0x000000000042475f in QFormInternal::FormBuilderPrivate::applyProperties ()
No symbol table info available.
#4  0x000000000042e83b in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#5  0x00000000004493c0 in QFormInternal::QFormBuilder::create ()
No symbol table info available.
#6  0x000000000042182e in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#7  0x000000000042fa37 in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#8  0x00000000004225a2 in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#9  0x0000000815eed3d7 in QFormInternal::QAbstractFormBuilder::load ()
   from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#10 0x0000000815ededad in QUiLoader::load () from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#11 0x0000000815eda326 in qtscript_QUiLoader_prototype_call (context=0x813262240)
    at ../../generated_cpp/com_trolltech_qt_uitools/qtscript_QUiLoader.cpp:282
        _q_arg0 = (QIODevice *) 0x813fe5610
        _q_arg1 = (QWidget *) 0x813ffdcd0
        _q_result = (QWidget *) 0x8006e2c00
        _id = <value optimized out>
        _q_self = (QUiLoader *) 0x813f08d40
#12 0x0000000805fc9f78 in QScript::FunctionWrapper::proxyCall () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#13 0x0000000805ee418f in QTJSC::NativeFuncWrapper::operator() () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#14 0x0000000805eb93ee in QTJSC::Interpreter::privateExecute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#15 0x0000000805ec1ccd in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#16 0x0000000805ec1ff9 in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#17 0x0000000805fa9743 in QScriptEnginePrivate::evaluateHelper () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#18 0x0000000805faabc6 in QScriptEngine::evaluate () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#19 0x0000000800ac5aae in RScriptHandlerEcma::eval (this=0x811f435e0, script=<value optimized out>, 
    fileName=<value optimized out>) at RScriptHandlerEcma.cpp:855
        err = {d_ptr = {d = 0x7fffffffcf50}}
#20 0x0000000800ac65c5 in RScriptHandlerEcma::doScript (this=0x811f435e0, scriptFile=@0x7fffffffd2f0, 
    arguments=<value optimized out>) at RScriptHandlerEcma.cpp:851
        fi = {d_ptr = {d = 0x813f94700}}
        globalObject = {d_ptr = {d = 0x813ff1240}}
        contents = {static null = {<No data fields>}, static shared_null = {ref = {_q_value = 3936}, alloc = 0, size = 0, 
    data = 0x809bb387a, clean = 0, simpletext = 0, righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}}, 
  static shared_empty = {ref = {_q_value = 19}, alloc = 0, size = 0, data = 0x809bb389a, clean = 0, simpletext = 0, 
    righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}}, d = 0x811c11800, static codecForCStrings = 0x0}
#21 0x0000000000417d13 in MainWindow (this=0x7fffffffd4b0, parent=<value optimized out>) at MainWindow.cpp:99
No locals.
#22 0x0000000000416ad9 in main (argc=1, argv=<value optimized out>) at main.cpp:35
        app = <value optimized out>
        window = {<QMainWindow> = {<QWidget> = {<QObject> = {_vptr$QObject = 0x4992b0, static staticMetaObject = {d = {
            superdata = 0x0, stringdata = 0x809933ae0 "QObject", data = 0x809933b80, extradata = 0x809ba94c0}}, 
        static staticMetaObjectExtraData = {objects = 0x0, 
          static_metacall = 0x80985cd80 <QObject::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}, d_ptr = {
          d = 0x811d28600}, static staticQtMetaObject = {d = {superdata = 0x0, stringdata = 0x80993cc40 "Qt", 
            data = 0x809940560, extradata = 0x0}}}, <QPaintDevice> = {_vptr$QPaintDevice = 0x499478, painters = 0}, 
      static staticMetaObject = {d = {superdata = 0x809ba94e0, stringdata = 0x808e66be0 "QWidget", data = 0x808e670c0, 
          extradata = 0x809282360}}, static staticMetaObjectExtraData = {objects = 0x0, 
        static_metacall = 0x8087899a0 <QWidget::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}, 
      data = 0x811d28748}, static staticMetaObject = {d = {superdata = 0x809282380, stringdata = 0x808ec04c0 "QMainWindow", 
        data = 0x808ec0660, extradata = 0x8092abc60}}, static staticMetaObjectExtraData = {objects = 0x8092d1880, 
      static_metacall = 0x808e5aaf0 <QMainWindow::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}}, 
  documentInterface = 0x811d31600}
        ret = <value optimized out>
976dxflibBug ReportLowDXF import errors related to hatches, textsAssigned
0%
Task Description

See:
http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677

980QCAD (main)Bug ReportLowIsometric Projection / blocks / wrong layer are used in...Assigned
0%
Task Description

Isometric Projection used on a selection which contains blocks will mix up the layer affiliations.
No blocks - no problems ;-)

1008QCAD (main)Bug ReportLowDXF (dxflib) compat issuesAssigned
0%
Task Description

Git head as well as 3.4.5 (trial), both with dxflib 3.3.4.0.

Start up QCAD, (with existing or new configuration, doesn’t seem to matter), “Save as” the completely empty drawing, choose “R15 (dxflib)” on Pro (only this one is available on community), save drawing.

Fire up AutoCAD 2000, try to load the empty drawing just saved.

Result:

DXF read error
Error in APPID Table
DXF read error on line 941.
Invalid or incomplete DXF input -- drawing discarded.

Problem not present when a completely empty drawing saved using Teigha in R15 format is opened (ie. it just results in an empty drawing in AutoCAD 2000). Problem is also not present when saving an existing drawing with Pro (trial) with Teigha and opening it in AutoCAD 2000. Problem does present when trying to open a dxflib-saved drawing in AutoCAD 2000.

Empty drawings created with both dxflib 3.3.4.0 in QCAD Pro 3.4.5 trial and Teigha whatever in QCAD Pro trial 3.4.5 are attached. (Community Git 135fd0 is identical to Pro - same dxflib version.)

1087QCAD (main)Bug ReportLowRuler ticks are not corresponding to the grid pointsAssigned
0%
Task Description

Ruler ticks are not corresponding to the grid points,
Ruler will completely disappear at a certain zoom level,

Settings:
Drawing unit: inch,
Grid settings: Grid 1, Meta Grid 12,
Dim Label Format: “Engineering, 0’-0.0”

see topic below:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014

1180dxflibBug ReportLowdxflib cannot open files with international characters ...Assigned
0%
3 Task Description

With dxflib, QCAD cannot open any file with Chinese file name or path name, it popups a “Important Error” dialog.
But the writing (”Save As” command) with Chinese file name or path name is of no problem.
Does it mean dxflib can only handle single byte characters file name/path name?
WinXP, QCAD 3.8.0

1203dxflibBug ReportLowImages not saved (dxflib)Assigned
0%
Task Description

I am doing a bit of landscaping and using a (big) ortophoto as one of my layers in order to sanity-check on the ground measurements.

The layer contains a point and the image and nothing else.

The image is a 8MB file: “PNG image data, 4200 x 2980, 8-bit/color RGB, non-interlaced” and it is scaled to 210 coordinate units (meter) horizontally in the drawing.

With approx 50% probability the image disappears during Save, as see for instance in this diff of the DXF file:

      @@ -158699,28 +153057,6 @@ AcDbXrecord
        90
       6
         0
      -IMAGEDEF
      -  5
      -A1
      -100
      -AcDbRasterImageDef
      - 90
      -0
      -  1
      -/critter/HTV10/Ortofoto/ortofoto201502f.png
      - 10
      -210.0
      - 20
      -149.0
      - 11
      -1.0
      - 21
      -1.0
      -280
      -1
      -281
      -0
      -  0
       ENDSEC
         0
       EOF

The point in the same layer does not similarly disappear, the bug only seems to affect images.

I have seen this bug from version 3.7.5.0 to git as of yesterday (63e06c778926a803bdfbffdf27b8c24d41511072).

I have not been able to correlate the bug with anything.

Looking closer at the DXF file (attached), there seems to be some residuce of attempts to insert images in protected/invisible layers, so this may be some kind of refcounting issue.

(Any chance of getting FreeBSD into the “Operating System” field ?)

1214QCAD (main)Bug ReportLowArray of blocks -> Clipboard -> "flip pasted entities" ...Assigned
0%
1 Task Description

Case:

Select a block array,
put it with “Copy with reference” or “Cut with reference” into the clipboard,
choose a reference point which isn’t in the center of the array,
use the paste tool / with option “flip pasted entities”

If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point.
If I try to flip in both directions at the same time - you can’t see this effect.

1242QCAD (main)Bug ReportLowSVG import DPI box should use localized decimal separat...Assigned
0%
Task Description

I wanted to make it so, that SVG units translate 1:1 into CAD units; I use the German localized QCAD and entered 25,4 into the box with the wrong result, i.e. the same as 25; Entering 25.4 got me what I wanted: The question box needs the point and ignores the comma. Would be nice if it could use the localized separator.

1339QCAD (main)Bug ReportLowLibrary Browser unstoppableAssigned
0%
Task Description

Hi,

Even with the Application Preference, Library Browser, NO Update on Start up,
the Libray Browser scans the directory, a proces that can’t be stopped or closed.

1427QCAD (main)Bug ReportLowInfo Tool / Polylinie Area (II)/ Preview brokenAssigned
0%
Task Description

Print “Command Line” and as “Add measurement to drawing” works as expected.

1445QCAD (main)Bug ReportLowSwitching off grid scaling can break rulersAssigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4314

1462QCAD (main)Bug ReportLowMac Trackpad zoom gesture not working as expectedAssigned
0%
1 Task Description

Hi,

I am using mac version and I have annoying issue with trackpad.
I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows.
Mouse wheel / two finger swipe: Scroll (Trackpad...
Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around)
Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page)
Reverse mouse wheel direction for zoom :unticked
Mouse wheel zoom factor: 1.02

Things work as expected:

  • panning with two finger swipe
  • and the rest

Issue I am experiencing:

Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler.
The mouse point remains where it is.

Workaround:
Reset viewpoint with autozoom and navigate around.

Expected zoom behaviour:
I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.

12QCAD (main)Feature RequestLowFile Export FormatsAssigned
0%
Task Description

Open

Postponed

  • SQL
  • DGN
  • Google SketchUp
  • Canonical representation of DXF that would allow for meaningful diffs
  • XML representation of DXF

Not Planned

  • EMF/WMF (use SVG instead or use SVG to EMF converter)

Done

  • SVG
  • PDF
21QCAD (main)Feature RequestLowAdd line weight scale factorAssigned
0%
Task Description

Required for extreme units such as Nanometers or Kilometers. See also FS#20

116QCAD (main)Feature RequestLowShow polyline area in property editorAssigned
30%
2 Task Description

Show area of closed polyline, hatch, solid fill in property editor.

154QCAD (main)Feature RequestLowImage: move reference points to scaleAssigned
0%
Task Description

Image: move reference points to scale

173QCAD (main)Feature RequestLowexplode text to lettersAssigned
0%
Task Description

implement

208QCAD (main)Feature RequestLowSVG export: support custom line weightsAssigned
0%
Task Description

Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594

228QCAD (main)Feature RequestLowInsert current date (and other fields)Assigned
0%
1 Task Description

Insert filed into drawing that displays current date, file name, ...

268QCAD (main)Feature RequestLowDefine grid originAssigned
0%
Task Description

Define grid origin

275QCAD (main)Feature RequestLowRounding all corners of a polylineAssigned
0%
1 Task Description

Modify - Round - Click polyline - round all corners

277QCAD (main)Feature RequestLowcommand line arguments: allow class name after -execAssigned
0%
Task Description

command line arguments: allow class name after -exec

293QCAD (main)Feature RequestLowmulti-select for blocksAssigned
0%
Task Description

It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.

316QCAD (main)Feature RequestLowBlocks list and selected blockAssigned
0%
1 Task Description

Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?

(Feature request sounds a little harsh, enhancement proposal would seem more apt.)

355QCAD (main)Feature RequestLowRemember function for dimension OptionAssigned
0%
Task Description

I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.

Why Remember Function:
If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.

384QCAD (main)Feature RequestLowMenu icons under Mac OS XAssigned
0%
Task Description

Make this an option. Default should be no icons since icons are unusual for Mac OS X application menus.

396QCAD (main)Feature RequestLowBlocks: moving blocks: show bounding boxAssigned
0%
Task Description

Blocks: moving complex blocks with drag and drop should show bounding box as preview

408QCAD (main)Feature RequestLowScript Macro recorderAssigned
0%
3 Task Description

Having practically no experience in scripting, a recorder that one could activate to memorize repetitive tasks (ie: inserting several layers with different attributes when starting a new drawing)would a useful tool to help get a start on scripting.

426QCAD (main)Feature RequestLowScriptable entitiesAssigned
0%
Task Description

Provide script functionality for entities:

  • Paint or decorate entity, for example based on custom properties assigned to the entity
  • Listen and react to events
454QCAD (main)Feature RequestLowcombined move/rotate/scale with two reference pointsAssigned
0%
Task Description

It would be extremely helpful, if marked objects could be moved/rotated/scaled in a single step with two reference points as source and two reference poitns as destination. With a tool like this, “should match”-drawings could be merged easily.

455QCAD (main)Feature RequestLowlogical operations for polylinesAssigned
0%
Task Description

A missing feature in my work are logical operations (combine, intersect, ..) for polylines

Example:
Draw some elements, select them, say combine. The result will be the outline of all elements.

467QCAD (main)Feature RequestLowFeature request for new Arc tool option to add to Arc s...Assigned
0%
2 Task Description

For and behalf of mandrena

To add another Arc tool option in Arc tools set:

1.Specify Start point for Arc.
2.Specify End point for Arc.
3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!

500QCAD (main)Feature RequestLowAutohide Side PanelAssigned
0%
1 Task Description

it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.

502QCAD (main)Feature RequestLowPoints on line: enter distance instead of number of poi...Assigned
0%
1 Task Description

Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.

503QCAD (main)Feature RequestLowConvert entities to points with a fixed distanceAssigned
0%
Task Description

Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.

See also forum at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834

512QCAD (main)Feature RequestLowModify stretch and Restrict orthoAssigned
0%
1 Task Description

The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.

So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?

514QCAD (main)Feature RequestLowPunktpestimmung Intersection manual muss immer wieder n...Assigned
0%
Task Description

Beispiel:
Zeichnen einer Linie (Line two points) mit Punktbestimmung.
Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut ;-)

Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht :-(

516QCAD (main)Feature RequestLowTo add option to 'print only' selected area.Assigned
0%
2 Task Description

To add the option to ‘print only’ selected area in a drawing.

519QCAD (main)Feature RequestLowPress tab to access first control in options tool barAssigned
0%
Task Description

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867

Apparently this was possible in QCAD 2 due to the default behavior of Qt.

Showing tasks 51 - 100 of 362 Page 2 of 8 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing