QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
2550QCAD (main)Bug ReportLowOnly a partial hatch appears in a closed shapeAssigned
0%
Task Description

I’m seeing only a partial hatch in the shape. See here for details.

704QCAD (main)Feature RequestLowOld Hatch FunctionAssigned
0%
2 Task Description

It would be nice to implement the old hatch function as a tile function in parallel with the newer more industry standard hatch function. A tile function that would allow overlap +/- would be even better, and a great productivity boost, almost like an array within a set of bounds.

Thanks, Bob

2016QCAD (main)Bug ReportLowOffsetting multi selection of polylines halts prematureAssigned
0%
1 Task Description

See:
https://qcad.org/rsforum/viewtopic.php?&t=6827&p=25992#p25992

Offsetting 32 polys from ellipses fails.
Offsetting 16 polys can be completed with 2 selections for outer and 2 for inner.

For some reason the offset function halts premature.

Regards,
CVH

1130QCAD (main)Feature RequestLowOffset Polyline from both sides at onceAssigned
0%
Task Description

It would be great to have a tick box to be able to offset a polyline from both sides/edges at once.

Maybe a similar feature could be added to the line -parallel tools?

1836QCAD (main)Feature RequestLowOffset for paste along entityAssigned
0%
Task Description

add a new parameter “offset” in the dialog “Paste along entity”

see https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22307#p22307

775QCAD (main)Feature RequestLowNote book tool for QCADAssigned
0%
1 Task Description

It would be really cool to have a Note book tool for QCAD!

For example I am often working on a draft and at the same time scribbling notes down on a separate piece of paper relating to the drawing I am working on, could be anything e.g. add a block,add a dimension etc. etc... all sorts of things to remind myself about - all related to a particular drawing.

Of course I could use any number of other programs for this but a simple dedicated tool inside QCAD (could be called the ‘QCAD scribbler ;)) would be much better, especially one that can save the notes to a particular file, then when I open up my drawing again - my notes are there too!

641QCAD (main)Bug ReportLowNo warning is displayed when lengthen tool is used with...Assigned
0%
Task Description

Command ‘Lengthen LE’ will extend most arcs but not all (2 arcs in the attached drawing do not work)! There is no obvious reason for this from the users point of view.

1926QCAD (main)Feature RequestLowNo negative coordinate values ? (DO command)Assigned
0%
1 Task Description

Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !

Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command.
There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !

GW.G

1092QCAD (main)Feature RequestLowNew tool: draw trace entitiesAssigned
0%
2 Task Description

Add tool to construct new trace entities.
Trace entities can currently only be loaded from DXF/DWG.

964QCAD (main)Feature RequestLowNew tool request - 'Break Out Arc' from CircleAssigned
0%
Task Description

It would be useful to be able to pick a Start and End point of an Arc within a Circle to then break this out. So in principle another break out tool.

Please see topic:http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8826#p8826

2535QCAD (main)Feature RequestLowNew tool idea: Scale polyline objects separately, each ...Assigned
0%
Task Description

In my current QCAD file I’m working on, I have a circular hub with a hole in it which I am also trying to place an alternating sequence of rectangular spokes of a certain relative size around.

I had 4 spokes that I had copied and rotated 45 degrees to create 8 spokes in total around the circle. I tried scaling the the non-cardinal spokes relative to the center of the circular ring, but that causes them to also move towards the center of the ring as they shrink, thereby putting them out of place as they scale.

I therefore had to activate the scale tool once per each object and set an origin (focus) point around the area where each spoke is “attached” to the ring in order to stop each from shifting inward to the circle as it scales.

It occurred to me though that there could be a simple tool or option to do this without that.

Each of my rectangles are polyline objects and thus are coherent continuous objects.

A new scaling tool could be designed such that it is based on simply clicking on each scaling origin on each object (using snapping tools if needed) and then clicking a check button (or enter) when done and then causing the scaling GUI to appear so the user can specify the desired scaling. Each scaling would then be applied to where the polylines were clicked instead of to all the objects as one.

This would be a much faster way to rescale a bunch of objects around individually varying relative scaling origins!

1364QCAD (main)Feature RequestLowNew Tool -'Run Parallel with'Assigned
0%
2 Task Description

New Tool request:

When drawing a line it would be good to have a tool/option to ‘run parallel with’.

For example start to draw a line and choose ‘run parallel with’, select appropriate line to draw parallel with!

1363QCAD (main)Feature RequestLowNew Tool - make lines horizontal or verticalAssigned
0%
Task Description

New Tool Request:

To have a tool to make any given line which is ‘not’ orthogonal already into an orthogonal line.

For example if I had a line at 30 degrees by using the tool I could change the line to be either horizontal or vertical.

813QCAD (main)Feature RequestLowNew Snap tool: Isometric coordinates ...Assigned
0%
Task Description

It would be nice to have an additional Coordinate tool for isometric constructions.

If I’m working on an isometric drawing I have to design my things with x, y, z coordinates.
Y is, of course not a problem but for x and z I have most off the time to work with construction lines for move, copy, locate etc.
With an isometric coordinate snap tool what will follow the 30° angles for x and z we could save a lot of construction lines ;-)

1446QCAD (main)Feature RequestLowNew Polygon toolAssigned
0%
2 Task Description

Hi,

if I need to design a bolt circle (circle on circle) and the single bolt diameter and the quantity of circles are given then I can use the QCAD Polygon Tool “Polygon 2 Points of Side” ... but for the Length of the side I have to do a workaround (Line with this length) to determine the desired length.

It would be very convenient to have an additional tool for a Polygon which has the possibility to ask me for the center, corners and the length of the sides.

1362QCAD (main)Feature RequestLownew layer tool: Toggle visibility allAssigned
0%
1 Task Description

Hi,

I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go.
Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.

The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.

And I’m confident - there are many more useful scenarios for a tool like this one ... ;-)

pics: “Toggle visibility all” with one click:

1505QCAD (main)Feature RequestLowNew feature - use info tools with scaleAssigned
0%
Task Description

When using the info tools, like the point to point measure it would be useful to be able to select a scale as well.

For example, when I scale a drawing say to 1:20, when working on the scaled drawing I can measure accurately with the measure tool in 1:20 also, without having to keep refering to the 1:1 drawing.

Regards

Clive

1621QCAD (main)Feature RequestLowNew Drawings in Draft ModeAssigned
0%
Task Description

See: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5001

1440QCAD (main)Feature RequestLowNew Drawing in Simple APIAssigned
0%
1 Task Description

Could it be possible to add a simple function to add a new empty drawing (like File > New) to Simple.js ? Thank you. (PS, this simple.js API is awesome, btw :D)

( I already have my own to simplify my scripts, but it does not seem to work correctly if I set action.setRequiresDocument(false); in the init functions
See more at http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4203#p15203 )

1165QCAD (main)Feature RequestLowNew Create Spiral ToolAssigned
0%
4 Task Description

A new tool to create Spirals would be great to have, with an option to restrict the decline to achieve to draw either Logarithmic or Linear styles.

Please see related topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3236

792QCAD (main)Feature RequestLowNew 'Match' properties toolAssigned
0%
Task Description

To add a new ‘Match’ properties tool.

For example, I have a large drawing with lots and lots of entities on various layers and I want to select some entities (say 500 or more) which are all on different layers and change all these selected entities to match the properties of one other particular entity - but, but I want the ‘Matched’ entities to remain on their own layers.

OK, of course I can use the property editor for this and this is fine in most instances but I would first need to determine the the layer data for the properties of the entity I would like to match to (Color, Line weight and Line type) in the first place and then I need to remember these attributes in order to change things in the property editor in order to change all of my selection to match!

As I say mostly the above procedure would be fine to use but for convenience it would be great to have a new tool to do all this for me and cut out a few steps in the process.

A new ‘Match’ properties tool procedure could be something like this:

1. Select Match properties tool.

2. Select all entities to be matched.

3. Select entity to match to.

4. Tick or leave un-ticked - move to same layer.

5. Complete process.

* Actually, while writing this I`ve just thought of another useful addition which could be added to the Info tool set, ‘Entity’ properties info!
Example - click on Info > Entity Properties and click on the entity in question and then the properties are displayed without going to the layer data for this!
Just an idea ;)

2057QCAD (main)Feature RequestLowMultiline toolAssigned
0%
2 Task Description

Implement a multiline tool.

293QCAD (main)Feature RequestLowmulti-select for blocksAssigned
0%
Task Description

It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.

786QCAD (main)Feature RequestLowMulti - Breakout toolAssigned
0%
2 Task Description

A ' Multi ' Breakout tool or added option to the existing Breakout tool.

For example see attached image.

An option to remove all segments within a chosen boundary would be good, in my example I want to remove all the hatching within the Red circle.

So after exploding the Hatch, currently I have to remove all segments singularly!

Of course I could have placed the circle first and hatched around it - but in this and most instances it is easier to design and to produce the Hatching first and then place my circle/shapes etc.

1916QCAD (main)Bug ReportLowMoving an object in an angled viewport with mouse does ...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport to 90 degrees
4. Place view-port in paper space
5. Select the view-port in paper-space by clicking it
6. Try to move the object itself in the view-port (by clicking the “top” dot) to the right by moving the mouse to the right while holding the left mouse-button.

Actual

The object in the viewport moves down vertically NOT to the right

Expected

The object moves to the right

(It seems mouse movement does not compensate for the rotated angle of the viewport)

Workaround

None, except compensate for the angle in your head and moving the mouse the “wrong” way when correcting the placement of objects in the view-port

2115QCAD (main)SuggestionLowMove toolbars with negative positions to 0 positions Assigned
100%
Task Description

As it can be seen in the attached image, QCAD toolbars may dock to a position slightly outside the visible area of the screen. After having docked there, I have not been able to move them any more. Their current position is just in the middle of the screen.

The position of the toolbars remains the same after the deinstallation of QCAD, shutting down, restarting the computer and reinstalling QCAD. I kindly ask for help.

Kind regards
Reinhard

833QCAD (main)Feature RequestLowMove number of copies into Options toolbarAssigned
0%
Task Description

The Number of Copies (Delete Original, Keep Original, Multiple Copies) and whether to use the current layers attributes should be found in the Options toolbar of the active tool.

This way the option would be set before or during the operation (preview?)the popup window afterwards would be obsolete.

822QCAD (main)Feature RequestLowmove Freehand Line to Polyline ToolsAssigned
0%
Task Description

In order to be more easily editable after creation Freehand Line should produce a Polyline and should be moved away from Line Tools to Polyline Tools

1628QCAD (main)Feature RequestLowMove / Copy and snap tangentialAssigned
0%
3 Task Description

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601

2537QCAD (main)Feature RequestLowMore variants for converting element types could be use...Assigned
0%
Task Description

I don’t actually have any use for this idea currently, but am just posting it here to document it for consideration.

Basically, it occurred to me at least a few more useful conversions between shapes besides the existing ones could be useful.

For example:

  • Converting lines into axially aligned rectangles of a specified “radius” or “diameter” (with an option to delete or keep the original line geometry).
  • An option for the above (lines –> rectangles) that causes the intersections between the resulting rectangles to be automatically removed, like a kind of “automatic/magic wall creation tool” based on laying down lines instead of rectangles and then converting via this tool.
  • Converting circles/ellipses and rectangles back and forth between each other via their bounding volumes. It seems reasonably likely that people will sometimes want to convert circular design elements into rectangular ones and vice versa (e.g. deciding a rectangular column makes more sense than a cylindrical one and vice versa).
  • Converting any arbitrary selection into a corresponding bounding circle (not rectangle, which already exists) of sufficient size to enclose all points in the selection.

Basically, QCAD already has tools for converting shapes with operations that are a natural fit for the existing geometry, but has less tools for converting to entirely different geometry, but such uses could actually still be very useful potentially!

It seems likely to be common enough as a use case to merit inclusion, rather than just using scripting.

I don’t have any pressing need for these and I know that I could script them to create them if I really wanted to.

These are relatively minor ideas. I’m just putting this out here as more ideas for making this already wonderful software even better. :)

2233QCAD/CAMFeature RequestLowMore selection options to select sheets for nestingAssigned
0%
Task Description

I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.

2087QCAD (main)Feature RequestLowMore options for "Paste along Entity" [PE]Assigned
0%
1 Task Description

“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.

Would be a nice time saver to have the same options for “Paste along Entity” too.

512QCAD (main)Feature RequestLowModify stretch and Restrict orthoAssigned
0%
1 Task Description

The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.

So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?

2145QCAD (main)Bug ReportLowModify > Trim Both: closed polyline as either entity br...Assigned
0%
1 Task Description

QCAD Professional

Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Use TM by mistake to trim a line to a closed shape.
Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7780
File included in the topic.
Y1 Original
Y2 Faulty use of TM
Y3 After ‘Undo’

Husky only ‘could agree on a not proper working undo
The conditional clause of this sentence is ‘the odd choice’.
Blaming this on incompetence.
Insight is the best way to get better ...
... but the rest is more an odd choice of tools for this kind of task ...

Again, the MISTAKE was by accident, not intended, in a flick of the wrist ...
I didn’t change the trimming method, I simply forgot to ... only once.

The ‘undo’ of my incompetent MISTAKE didn’t returned to how the situation was before I erroneous trimmed with TM.
I was simply undoing my erroneous action.

Documented it in 4 quadrants.
For this, 4 times on purpose, and not as a consistent ‘odd choice’.

Regards,
CVH

1430QCAD (main)Feature RequestLowModify > Round: one-click filletAssigned
0%
1 Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4256

1676QCAD (main)Feature RequestLowModify > Explode: explode lines / arcs with line patter...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4333

2316QCAD (main)Feature RequestLowModify > Detect Duplicates: implement for infinite line...Assigned
0%
1 Task Description

Headline should already explain the issue ... ;-)

2347QCAD (main)Bug ReportLowModify / Clip to rectangle issueAssigned
0%
1 Task Description

The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.

894QCAD (main)Feature RequestLowModify - Clip to Rectangle: copy area to clipboardAssigned
0%
2 Task Description

New mode for clip to rectangle: copy contents of rectangular area to clipboard.

1262QCAD (main)Feature RequestLowMissing some kind of "QCAD is still working" indicator.Assigned
0%
1 Task Description

If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...

It would be nice to have some kind of visual info that QCAD is working.

2169QCAD (main)Bug ReportLowMissing G-Code G00 X0 Y0 when placing hole at x0 y0Assigned
0%
Task Description

When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code.
So the first cut was made at the current position of the tool, not at x0 y0!

2396QCAD (main)Bug ReportLowMissing Dim/Label Format information from an extern wri...Assigned
0%
Task Description

Please refer to forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9556

The attached example file is written with a third party CAD program in R15.
Opened in QCAD CE all Dim/Label information are available.
If I load this drawing in QCAD Pro the Dim/Label information are lost.

If I load and save the example drawing with CE the newly written dxf is readable in Pro without any issue.

767QCAD (main)Feature RequestLowMerging/Combining segments of a straight line into oneAssigned
0%
2 Task Description

Sometimes you end up with a straight line which is broken/split into several parts. It would be great to have a tool to merge/combine these segments into one.

That would be the opposite/complementary tool to the “Split Entities” tool.

836QCAD (main)Feature RequestLowMerge different Offset tools into just twoAssigned
0%
Task Description

Merge Parallel Line(with distance), Concentric Arc(with distance), Concentric Circle(with distance) and Offset(Polyline) into one generic Offset with distance tool that if possible also works for ellipses and splines.

Do the same for the “through point” tools so that there also is just one Offset through point tool.

The Offset tools could be located with the Modification tools.

1982QCAD (main)Feature RequestLowmeasure DIN 1356Assigned
0%
Task Description

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

604QCAD (main)Feature RequestLowMeasure and record X,Y coordinates tool - add to info ...Assigned
0%
Task Description

Feature request
See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015

Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.

1371QCAD (main)Feature RequestLowMatrix - Modify, missing Flip Horizonatal and Vertical ...Assigned
0%
Task Description

Matrix - Modify, add Flip Horizonatal and Vertical tools

2341QCAD (main)Feature RequestLowmanage image referencesAssigned
0%
1 Task Description

QCAD. ver. 3.27.1.0 (3.27.1)
Qt version: 5.13.2
Architecture: x86_64
OS Windows 11

It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again.
I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)

1005QCAD (main)Feature RequestLowMaking use of mouse buttons configurableAssigned
0%
Task Description

According to the help, one requires a middle mouse to pan. Since few standard mice have middle buttons, this is a poor choice for this all important function. The default should be the right mouse button when ever the mouse is placed in an open area with nothing else to select. That way right click can still be used to invoke a pop down menu when ever the mouse is placed over an object that might have a need for pop down menu options. Additionally, the Pan mouse key should be alterable and selectable from a Preferences option, since if one does have a three button mouse, we should not prevent a user from employing this hardware if they have it. The same might be said for all mouse buttons to allow the user to configure the mouse operation to that which is most comfortable and efficient for their tasks.

1740QCAD (main)SuggestionLowMake unprintable layers also hidden in print previewAssigned
0%
Task Description

Make unprintable layers also hidden in print preview

Showing tasks 151 - 200 of 519 Page 4 of 11<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing