|
1911 | QCAD/CAM | Feature Request | Low | Drill Toolpath | Assigned | |
|
Task Description
Hallo Andrew
It would be more than conveniant, defining the drilling locations of the drill toolpath, by selecting a circle’s center point.
|
|
1913 | QCAD/CAM | Bug Report | Low | 3D Simulation Behaves odd | Assigned | |
|
Task Description
Hallo Andrew,
testing the drill toolpath I used single point markers.
In 3D simulation the tool drills the toolpath AND uses the drill as a mill.
Cam Export and generated G-code is not effected.
|
|
1940 | QCAD/CAM | Feature Request | Low | CAM > CAM Configuration: Add program description | Assigned | |
1 |
Task Description
Add a program description to the CAM configuration dialog and export to postprocessors as variable.
See also: https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649
|
|
1954 | QCAD/CAM | Release | Low | Revised PWM Post Processor | Assigned | |
|
Task Description
Hallo Andrew,
I have revised the PWM Post Processor to Revision D.
|
|
1971 | QCAD/CAM | Bug Report | Low | CAD/CAM 3D Simulator | Assigned | |
|
Task Description
Hallo Andrew,
Found a bug in the 3D Simulator execution
|
|
2164 | QCAD/CAM | Feature Request | Low | Add ability to pan the 3D view with a modifier key and ... | Assigned | |
2 |
Task Description
With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.
|
|
2167 | QCAD/CAM | Bug Report | Low | Comma format decimal separator fails ZSafety CAM config... | Assigned | |
1 |
Task Description
QCAD/CAM Trial package Win installer 32 bit Version: 3.25.2.0 (3.25.2) Internet: QCAD.org Build Date: Sep 4 2020 Revision: 4a61501 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Local decimal separator is ‘,’ (comma) In CAM configuration .. Z Levels .. Safety level
Using nn,nnn the output is Nxx G0 Znn Using nn.nnn the output is Nxx G0 Znn.nnn
Drop down boxes are all in dot format. Didn’t try anything else yet
Regards, CVH
|
|
2213 | QCAD/CAM | Feature Request | Low | Allow editing Spindle Speed separately for each Toolpat... | Assigned | |
1 |
Task Description
Hello dear CAM developers!
I need to use the same tool at different spindle speed in a single machining file. I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)
FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal. I need to be able to do both engraving and cutting in a single file. Alas! this laser tool is defined with a fix and unique number (99). Therefore I cannot define different laser tools with different speeds.
Many thanks Best regards.
|
|
2233 | QCAD/CAM | Feature Request | Low | More selection options to select sheets for nesting | Assigned | |
|
Task Description
I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.
|
|
2307 | QCAD/CAM | Feature Request | Low | Tools to create dogbones or corner overcut | Assigned | |
2 |
Task Description
The inside corners of profile tool paths have rounded inside corners. This occurs because the rounded outside the bit cannot make it all the way into the corner of the feature. Think of tracing the inside wall of a cardboard box with a can of soup. The can makes direct contact with the box walls, but its round shape is unable to completely fit into the tight corners— there’s always a gap.
In a dog-bone overcut (see the figure in attachment), the inside profile corner is enlarged into a semicircle, allowing the sharp edges of the mating piece to slide through without interference.
When a dog bone is applied to the inside corners, as shown in the second figure in the attachment, the joints fit together nicely!
The following website explains what should be implemented More elegant CNC dogbones
There are two ways to implement this tool. Either you modify the original design (as implemented in Fusion 360) or you can do it at the moment you define the tool path (Estlcam allows you to do this for example). See the feature Corner overcut, on Estlcam website
|
|
2330 | QCAD/CAM | Feature Request | Low | Toolpath optimization optional (on/off) | Assigned | |
2 |
Task Description
Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033
|
|
2331 | QCAD/CAM | Feature Request | Low | Tabs: Control over on which particular profile used. | Assigned | |
|
Task Description
Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.
It would be nice to have some kind of control on which profile a tab has to be used.
|
|
2374 | QCAD/CAM | Feature Request | Low | Add Spindle Speed to Toolpath Dialog | Assigned | |
1 |
Task Description
When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.
Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.
Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?
Many thanks’, and best regards.
|
|
2418 | QCAD/CAM | Feature Request | Low | Include a GroupCustom widget in CAM Toolpath dialogs. | Assigned | |
2 |
Task Description
Andrew,
Unrelated to OS or QCAD version.
In the postprocessor configuration dialog there is a group box called ‘GroupCustom’. One can add custom widgets to that, rename it and so on.
Such is not provided in CamProfileToolpathDialog.ui or CamDrillToolpathDialog.ui
It should be possible but we aren’t really able to mix up things with the ‘Message’ QLabel ... A reserved QGroupBox would do the trick.
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9647
Regards, CVH
|
|
2506 | QCAD/CAM | Feature Request | Low | Include arc segmentation for 'milling' On-Path. | Assigned | |
3 |
Task Description
Related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10468
For ‘milling’ on path it doesn’t consider
this.arcInterpolation = true
in the custom postprocessor nor the checked option in the CAM Configuration Dialog.
As far as detected the CamArcInterpolation checkbox of the CAM Configuration Dialog is unrelated to the this.arcInterpolation in the postprocessor.
Regards, CVH
|
|
2507 | QCAD/CAM | Feature Request | Low | Add Toolpath from Layer | Assigned | |
1 |
Task Description
I’ve been able to make this work as proof of concept very easily, but many of the functions are inaccessible/difficult to override from post-processors.
Desired functionality:
1) Enable “Add Profile Toolpath” UI elements all the time (remove setRequiresSelection) 2) CAM Profile Toolpath Dialog: Drop-down menu of available Layers. First option “By Selection Only” 3) “By Selection Only” continues to pass EntityIds of selected objects (existing functionality) 4) Choosing an active Layer will use the Layer as source of EntityIds 5) Any changes to Entities on a Layer will result in those new/removed/changed objects being re-generated without having to manually select and update the tool paths. Either do not recover list of EntityIds from the ToolpathBlock, and instead use “live” each time it’s regenerated, or additional functionality to determine if a LayerId is associated with the Toolpath, and then lookup EntityIds.
I assume the persistence of the Layer selection would be available within the Toolpath, so that it will automatically update EntityIds every time a Toolpath is regenerated, without having to select Entities and updating the toolpath manually.
For large projects, being able to force select objects based upon layer dramatically reduces mistakes and speeds up the workflow.
Thanks
|
|
513 | Translation | Bug Report | Low | Translation errors | Assigned | |
|
Task Description
If you spot an error in the translated user interface of QCAD, please add a comment to this task or submit your translation at http://translate.qcad.org. Thank you for your help!
Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu oder geben Sie Ihre Übersetzung ein unter http://translate.qcad.org. Vielen Dank für Ihre Hilfe!
Si vous remarquez une erreur dans l’interface utilisateur traduite de QCAD, veuillez ajouter un commentaire à cette tâche ou soumettre votre traduction à http://translate.qcad.org. Merci pour votre aide!
Si detecta un error en la interfaz de usuario traducida de QCAD, añada un comentario a esta tarea o envíe su traducción a http://translate.qcad.org. Gracias por tu ayuda!
Se si rileva un errore nell’interfaccia utente tradotta di QCAD, si prega di aggiungere un commento a questo compito o di inviare la traduzione a http://translate.qcad.org. Obrigado por sua ajuda!
Se você detectar um erro na interface de usuário traduzida do QCAD, adicione um comentário a esta tarefa ou envie sua tradução para http://translate.qcad.org. Obrigado pela sua ajuda!
Als u een fout ziet in de vertaalde gebruikersinterface van QCAD, voeg dan een opmerking toe aan deze taak of stuur uw vertaling naar http://translate.qcad.org. Bedankt voor uw hulp!
|
|
1922 | dwg2bmp | Feature Request | Very Low | Add error message when requesting raster for a non-exis... | Assigned | |
|
Task Description
It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D
See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453
|
|
2461 | dxflib | Bug Report | Very Low | ASCII Control characters not handled correctly in Commu... | Assigned | |
|
Task Description
I see the following problem: When I open a particular DXF file in the Professional Trial version 3.27.9.0 on macOS, “^I” in text fields is expanded to whitespace. When I open the same DXF file in the Community Edition 3.27.9.0 on NetBSD/x86_64 (installed from pkgsrc), “^I” in text fields is visible as “^I”.
|
|
2495 | ECMAScript | Bug Report | Very Low | RLine.isParallel(RLine) may return true for certain non... | Assigned | |
1 |
Task Description
Andrew,
It took me a while to find the source of a certain freak bug I encountered. I used the RLine.isParallel(RLine) as a test for knowing if line segments were parallel or not.
Included below is script code that mimics the functionally of isParallel().
As far as I know isParallel() is nowhere used in the QCAD open source. Textual only found in RLine.cpp & .h or under: opennurbs, ecmaapi\generated and ecmagenerator\src.
// Example:
// RShape1: RLine(RShape(address: "0xcd70e28"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(1010.000000, -140.000000, 0.000000, 1)")
// RShape2: RLine(RShape(address: "0x7659770"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(930.000000, -340.000000, 0.000000, 1)")
----
var aShape1Angle = shape1.getAngle(); // =0.6640461628266838 rad
var aShape2Angle = shape2.getAngle(); // =4.483157047107694 rad
----
// RLine::isParallel(RLine) -> aTest1 || aTest2
var aTest1 = RMath.isSameDirection(aShape1Angle, aShape2Angle); // =false
var aTest2 = RMath.isSameDirection(aShape1Angle, aShape2Angle + Math.PI); // =true
var aTestOr = aTest1 || aTest2; // =>TRUE !?
----
// # BUG # RShape1 is considered as parallel with RShape2
----
// RMath::isSameDirection(dir1, dir2, tol) ... tol = RS.AngleTolerance = 1e-9
// for aTest1 -> ax1Test1 || ax1Test2
var ax1Dif = Math.abs(aShape1Angle - aShape2Angle); // =3.8191108842810104 rad
var ax1Test1 = ax1Dif < 1e-9; // =false
var ax1Test2 = ax1Dif > 2*Math.PI - 1e-9; // =false
var ax1TestOr = ax1Test1 || ax1Test2; // =>FALSE
----
// for aTest2 -> ax2Test1 || ax2Test2
var ax2Dif = Math.abs(aShape1Angle - (aShape2Angle + Math.PI)); // =6.9607035378708035 rad
var ax2Test1 = ax2Dif < 1e-9; // =false
var ax2Test2 = ax2Dif > 2*Math.PI - 1e-9; // =true
var ax1TestOr = ax1Test1 || ax1Test2; // =>TRUE
----
// # BUG # The second test of the second isSameDirection() test returns true because ax2Dif is over 2pi
Regards, CVH
|
|
752 | QCAD (main) | Feature Request | Very Low | Add support for the 3dConnexion Space Navigator (Pan an... | Assigned | |
4 |
Task Description
The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.
3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand
While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.
|
|
991 | QCAD (main) | Feature Request | Very Low | Add warning when overwriting custom property | Assigned | |
1 |
Task Description
Property Editor - Geometry - Custom - Add Custom Property
If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.
|
|
1443 | QCAD (main) | Bug Report | Very Low | View > Status Bar remains unchecked | Assigned | |
1 |
Task Description
Status Bar menu remains unchecked even it is toggled on or off
|
|
1626 | QCAD (main) | Feature Request | Very Low | 'Clip to Circle' tool | Assigned | |
1 |
Task Description
Hi Andrew,
Would it be possible to have a clip to circle tool also please?
Regards
Clive
|
|
1649 | QCAD (main) | Feature Request | Very Low | Add configuarable format options for saving blocks to l... | Assigned | |
|
Task Description
Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.
|
|
1691 | QCAD (main) | Bug Report | Very Low | Issue with Layouts after "File-Revert" | Assigned | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically. 2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .
For example can try on “flange.dxf”
|
|
1719 | QCAD (main) | Bug Report | Very Low | Undo on converted drawing leads to wrong label position... | Assigned | |
|
Task Description
Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.
|
|
1788 | QCAD (main) | Feature Request | Very Low | New snap: reference points of a block references | Assigned | |
|
Task Description
I know this was reported and fixed before ...
https://www.qcad.org/bugtracker/index.php?do=details&task_id=843
... but it looks like we have the issue now back with some kind of variation.
If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.
If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.
Edit: New Test drawing:
|
|
1900 | QCAD (main) | Bug Report | Very Low | Remote shares initially not accessible. | Assigned | |
|
Task Description
My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.
While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.
Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.
Drag and Drop from a remote share will never work.
|
|
1905 | QCAD (main) | Bug Report | Very Low | View > Property Editor: Changing attribute of block cha... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947
|
|
1920 | QCAD (main) | Feature Request | Very Low | Edit > Application Preferences: Add preference to disab... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447
|
|
1923 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polylines with Global/Local Widths and... | Assigned | |
1 |
Task Description
Win7pro 32bit Qcad 3.23.0
Andrew, The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.
In the attached drawing setting the Global Z of the inner poly to 5,10,...
The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly. It also affects the projected widths of the line inversely, but not by changing the widths properties.
Pritty rare combination! True. Qcad is 2D native! True.
Flatten will resolve this.
It is not a purely visual rendering fault, the poly will explode as such.
Maybe similar flaw as with uneven scaling blocks with arcs. https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703
Regards
|
|
1974 | QCAD (main) | Bug Report | Very Low | File > Print Preview: Cannot move paper in new drawing | Unconfirmed | |
|
Task Description
Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.
Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.
Affected versions tested:
Windows 64bit installer download, as of yesterday. Linux 64bit build from git, about 20minutes ago.
For what it’s worth, this bug is not present in this previous git checkout:
Version: 3.21.1.0 (3.21.1) Internet: QCAD.org Build Date: Jul 2 2018 Revision:
Qt Version: 5.7.0 Architecture: x86_64 Compiler: gcc 6.3.1
Thanks for a great product.
|
|
2021 | QCAD (main) | Performance Issue | Very Low | Cannot work with big dwg files | Assigned | |
|
Task Description
Openning a big file or doing any action in it, takes minutes to load. Even dragging the scrollbar slightly left or right, takes mintues to redraw the canvas again, which makes QCAD un-usable for professional use. Is there a way to make QCAD usable, after loading completed: - Like suppressing edit until user says so, - or taking snapshots of rendered canvases to another file and use it, as windows uses thumb.db ( for negative latency :P )
PS: I wish I could help a bit, but my hand are tied. I am just a java freak, I am opt to any idea of porting it to java, if she is still alive.
Tuğalsan Karabacak EEE, MSc Mobile Comp & App, IWE
|
|
2048 | QCAD (main) | Bug Report | Very Low | Move / Copy to current layer fails when reference point... | Assigned | |
|
Task Description
QCAD 3.24.2 / macOS x86_64 10.14.6
Starting with empty doc: 1. Draw any object (e.g. a rectangle) on layer 0. 2. Create new layer (”1”) with color, say yellow. 3. Select new layer 4. Select new object 5. Modify → Move / Copy 6. Click reference point 7. Click target point same as reference point 8. In “Move / Copy Options” dialog, select “Delete Original” and check “Use current layer and attributes.” Click OK.
The moved object stays on the layer it was previously on. Using “Move / Copy” as a quick way to move a selection between layers is not useful even though it appears to be the recommended way in a Google search.
Note: if “Keep Original” is selected instead, the copied object is placed on the current layer and the original object remains on its layer, as expected.
Note: if the target point is different from the reference point, the moved object is placed on the current layer as expected.
There are other workarounds too, cut / paste with “To current layer” checked seems to work, as does chaging the layer in the Properties Editor.
|
|
2088 | QCAD (main) | Bug Report | Very Low | column headers of the "General: tool settings " resize... | Assigned | |
|
Task Description
Open QCAD and the application preferences. In the section “General: tool settings " you can resize the columns: Menu, Shortcuts etc. The problem is that it is not intuitive. The first divider is not selectable and the second moves the first, only backwards.
|
|
2097 | QCAD (main) | Bug Report | Very Low | Very hard to snap to baseline reference point of dimens... | Assigned | |
|
Task Description
With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension. I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.
|
|
2098 | QCAD (main) | Bug Report | Very Low | Offset will pick up hidden blocks while using it in a l... | Assigned | |
1 |
Task Description
When I’m drawing inside a layout block the offset tool picks up lines from blocks that are hidden. It is not happening with all the block.
|
|
2107 | QCAD (main) | Feature Request | Very Low | Add a button to the tool bar to allow for a quick backg... | Assigned | |
1 |
Task Description
I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.
|
|
2138 | QCAD (main) | Suggestion | Very Low | Block zoomstate supersedes Model_Space after Undo of BC | Assigned | |
1 |
Task Description
Summary: Block zoomstate supersedes Model_Space after Undo of BC
QCAD Professional Version: 3.25.2.1 (3.25.2.1) Internet: QCAD.org Build Date: Oct 15 2020 Revision: 2895712 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown «< (Win installer 32 bit)
With the file provided: ZW to see the top green ‘revision cloud’ up close QQ Box select around the cloud »> 2 entities in selection BC, select origin somewhere inside the selection, accept proposed naming »> ‘Block 1’ is created from the selection TN BD, select the newly created Block Reference »> Auto zoom of ‘Block 1’ (Intended behavior) OO »> Returns to Model_Space with the zoomstate of the removed Block »> Halfway down the drawing »> The former zoomstate of the Model_Space is lost
Intended behavior is that the zoomstate of Model_Space and Blocks don’t mix See: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=7797&p=30371#p30378
This proves they do, even if the block doesn’t exists anymore.
Regards, CVH
PS: 3th trial to enter a suggestion ...
|
|
2146 | QCAD (main) | Suggestion | Very Low | Keep 'Invisible' objects invisible while saving | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882 Explanation found in REntity.cpp Listed as a Public Member Functions inherited from RObject
Regards, CVH
|
|
2147 | QCAD (main) | Suggestion | Very Low | Allow breaking up self-intersecting a 2e time (at endpo... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can cut (DI) once. Cutting the second segment results in NO cut.
Regards CVH
|
|
2148 | QCAD (main) | Suggestion | Very Low | Allow undo after breaking up self-intersecting with D2 ... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can break out segment (D2): - removing one of the loops with the ‘remove’ option. - leaving both without the ‘remove’ option. Bug? Without the ‘remove’ option it can’t be undone.
Regards CVH
|
|
2149 | QCAD (main) | Suggestion | Very Low | Allow undo after auto trim self-intersecting with AX in... | Assigned | |
1 |
Task Description
QCAD Professional win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version:5.13.2 Architecture: i386 Compiler: Unknown
Continued from https://qcad.org/bugtracker/index.php?do=details&task_id=1757 Splitting the old report up ... Same file. In the left example one can auto trim (AX): - The lower loop. - The top loop. Bug? The action on the top loop can’t be undone.
Regards CVH
|
|
2155 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polyline Arcs with Width = 2R | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Most likely not related to the QCAD version, rather an old sore.
File included Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803 Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’
Polyline arcs with Width = 2R render as circle segments rather than circle sectors. As Non-reversed arcs these don’t explode. As reversed arc these explode to a single arc rather than a circle sector contour.
There is also still the faulty rendering with Z not zero https://qcad.org/bugtracker/index.php?do=details&task_id=1923
Regards, CVH
|
|
2176 | QCAD (main) | Bug Report | Very Low | Modify > Break out Manual: relevance of order of click ... | Assigned | |
1 |
Task Description
QCAD Professional Windows 7; Win installer 32 bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988 File included. I have no intention to make 48 separate reports.
CVH
|
|
2181 | QCAD (main) | Suggestion | Very Low | Apply more distinguishable Enabled and Disabled state i... | Assigned | |
1 |
Task Description
QCAD Professional Win7 WinInstaller 32bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related forum Topic: https://qcad.org/rsforum/viewtopic.php?t=8015
CVH
|
|
2226 | QCAD (main) | Feature Request | Very Low | macOS: support proxy icon | Assigned | |
|
Task Description
Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.
|
|
2248 | QCAD (main) | Bug Report | Very Low | Themes: east and west dock widget tabs facing the wrong... | Assigned | |
1 |
Task Description
Hi Andrew
In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions. I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report. I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..
Best Regards John Hyslop PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu
|
|
2261 | QCAD (main) | Suggestion | Very Low | QCAD change freehand tool to freehand spline tool | Assigned | |
|
Task Description
no task description |