QCAD Bugtracker

As an old professional “documentation writer and user inteface designer” but IMHO, I’m not convinced that the “Application preferences” are correctly organised for ease of understanding and using them.
These settings are organised in 2 levels. Some of the first levels have their own settings (e.g. “Graphics view”) while most others don’t (e.g. “Load/save”). May I humbly suggest some consistency rules :
- no sub-level if there is only one subject
- no items on main level if there are already 1 or more sub-level(s).
For instance :
- sub-level “Default Dimension settings” under “Dimension” is the only sub-level : then move these items under main level “Dimension” and suppress the sub-level ;
- the items under “Graphics view” main level (with several sub-levels)could be in a sub-level named “General” ;
Actually, “Graphics view” main level is the only one which has both its own items and sub-levels )) ?

Source:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4752

According to the changelog for version 3.9.3 the info tools and coordinate display are tied to the current drawing dimensions. For much of my use I prefer to have the dimensions format different. The main reason is that my customers want to see the format in fractions, but when I am drawing I’d rather see the decimal format to make sure what I am drawing is accurate. So I’d really be interested in seeing a separate full configuration of the display and info coordinates.

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 

Regards

My request is that all selected entities stay selected after isometric projection, this would be useful for example if you need to modify the projection further after placing!
Maybe an extra button could be added in the ISO options?

The selection tool is not accessible:

Click on Selection Tool icon - left panel:

Left panel then shows line tool options.

Click “back” button at top of left panel:

Left panel then shows selection options.

Click an option icon:

Left panel then shows line tool options again.

It would be nice to have the Selection Filter also present in the Menu / Selection List

Please see last few posts here:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3227&p=11777#p11777

This would be nice.
It will save a lot mouse - keypad changes for me.

Provide script functionality for entities:

• Paint or decorate entity, for example based on custom properties assigned to the entity
• Listen and react to events

Having practically no experience in scripting, a recorder that one could activate to memorize repetitive tasks (ie: inserting several layers with different attributes when starting a new drawing)would a useful tool to help get a start on scripting.

3.0.8.
Bug Report or Feature Request ..... I’m not sure!

If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale.
x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...

Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”.
It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.

Hatched block loses hatching when using isometric projection tool:
See -http://www.qcad.org/rsforum/viewtopic.php?f=32&p=7063#p7063

When manipulating a saved hatched block with the isometric tool it loses the hatching unless the block is exploded.

Is this normal behaviour here? or a bug?

Not really a bug I suppose but the save as.dgn file format is missing in snapshot 3.0.8 release.

Will this be available again soon?

Inside the application preference dialog:

• save settings (asks for a name)
• restore settings (picked from a list that contains all so far saved settings and some presets)
• export settings (to a file)
• import settings (from a file)

Export / import could be useful for companies to synchronize settings.

Ruler ticks are not corresponding to the grid points,
Ruler will completely disappear at a certain zoom level,

Settings:
Drawing unit: inch,
Grid settings: Grid 1, Meta Grid 12,
Dim Label Format: “Engineering, 0’-0.0”

see topic below:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014

Modify - Round - Click polyline - round all corners

Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.

how do i draw revision cloud in Qcad pro
or when do you will implemented it

It would be a nice feature to be able to select multiple layers to remove them all at once.

I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.

Why Remember Function:
If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.

Reference dimensioning (baseline dimensioning)

Create multiple dimensions using the same base line.

Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.

We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.

My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.

1. First point: start

2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle

3. third point: determination second side (height?)

I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...

Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.

It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.

We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...

It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.

I experience long start delays. I’ve trace the problem to the fact that I have autofs automounting my home directories. However, an strace of qcad-bin shows the following:

execve("/opt/ribbonsoft/qcad/qcad-3.12.6/qcad-bin", ["/opt/ribbonsoft/qcad/qcad-3.12.6"...], [/* 87 vars */]) = 0
brk(NULL)                               = 0x1eca000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd6194ad000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib", 0x7fff4722f250) = -1 ENOENT (No such file or directory)

Since there is no “andrew” user here, I have to wait for automount to timeout which takes about 2m and is rather annoying.

Some users are experiencing problems with dwg2bmp.

See forum at:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2272&view=unread#unread

Beispiel:
Zeichnen einer Linie (Line two points) mit Punktbestimmung.
Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut

Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht

Easy transfer of properties from one entity to others

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320

Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239

When printing from the preview mode a standard Windows popup shows, letting me select the printer, number of copies and a page range. Unfortunately QCAD (or Windows) ignores the page range - it always prints all pages. So right now I always have to copy the parts I want to print, page them into a separate document and print that instead - even though I got all my stuff nicely lined up for printing on multiple pages.

Would be nice, if in print preview QCAD rulers would switch to paper dimensions. Chat here http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

After all, print preview is not just the drawing on white, isn’t it? Everything else should stay in drawing units. Just the rulers, maybe a preference?

Often in print preview I need to move the paper around and position it with the ‘Move Paper Position’ tool, which is useful, but what would be an additional extra useful option would be a ‘Place Paper Here’ tool.

Then I could simply use this tool first and then use the ‘Move Paper Position’ tool afterwards to fine tune things!

If you look at the attached image you will see that in this students file they have got their drawing spread out all over the place:(

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867

Apparently this was possible in QCAD 2 due to the default behavior of Qt.

Preferences not stored on some installations

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&view=unread#unread

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2887&view=unread#unread

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

On behalf of et76
Possible printing error using Linux 16 - needs further testing!
Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

Au nom de et76
Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests!
S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...

Screenshot:
First row: Befor / Second row: after

It would be nice and helpful if we had the possibility to control the order of Attributes - shown in the property editor.
I found a solution for myself with using numbers in the Attribute definition tag - but that isn’t really a nice solution.
If I could hide my numbering ... everything would be fine for me ....

I guess this is a case of wording and wrong expectations.

The polyline tool “Delete Segments between two nodes” removes nodes, but not segments as the title and the icon suggests.

I propose to rename it to “Delete Nodes between two nodes”.

A tool which actually removes line segments from a polyline, leaving gaps, could indeed be useful to some users.

I think of a straight polyline with several segments. Then I remove some segments. I end up with a polyline with “holes” in it. Now I could stretch that polyline and all the remaining segments and holes stretch proportionally. Could be handy some times.

Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.

To add a Plot Stamp option for printing, to have options to print file name, date , time etc...

See topic:http://www.qcad.org/rsforum/viewtopic.php?f=32&p=6967&sid=ba06663c8bdaef236272d80ad45ccf5f#p6967

Input:

1. X axis min/max or choose line (?) or center (for polar functions)
2. function: y = f(x) / polar function: r = f(a)

Output:

1. function plot

These are the versions Ubuntu 14.04 comes with, and since it’s an LTS version, it will linger around a while.

(Despite the fact that the Qt4 packages are versioned 4.8.5, qmake –version says 4.8.6, so it doesn’t find the 4.8.5 bindings.)

Thanks,

It would be useful to have a persistent selection button added to the ‘selection’ tool set.

This would allow the user to set persistent selection as and when needed for the current drawing one is working on, rather than going the long route through the ‘Application’ preferences dialog.

Not too sure if this would be possible for QCAD, but an option to open/import pdfs would be good.

Hi guys,

when I export my dxf drawing to pdf, the pdf properties shows wrong “created date”. I am in UTC+2, the date shows 2 hours less.
I exported the pdf at 12:24, the attached ps shows 10:24.

BR,
Soma