QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummary  descStatusProgress
2159QCAD (main)Bug ReportLowDraw > Polyline > Polyline from Selection: may induce N...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Discovered in 3.25.2.4, reproducible under 3.25.2.7

Draw any open or closed chain of line entities.
Select All.
OC to Polyline.
Step through vertices.

No example file provided because these NaN values are not saved to a file.
More pronounced with lines as with arcs.
Less pronounced when recombining after an explosion.
Some methods clear these to value = void.
Some methods clear these to zero (OR).
Can also occur when adding segments to an existing polyline with OC.

Regards,
CVH

1666QCAD (main)Feature RequestLowDraw > Line > Relative Angle / Orthogonal: define lengt...Assigned
0%
Task Description

Add option to define length (end point) using mouse pointer.

If reference point is “Middle”, extend line from middle in both directions to mouse cursor (?).

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5205

2436QCAD (main)Feature RequestLowDraw > Hatch > Hatch from Segments: mark position of op...Assigned
0%
1 Task Description

Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.

Same scenario tested with “Hatch from Selection” (HA) ...
... everything works like a charm ;-)

2497QCAD (main)Bug ReportVery LowDraw > Circle > 3 Tangents (CT3) fails in some cases wi...Assigned
0%
1 Task Description

Andrew,

See attachment with example:

Solution included on layer ‘Solution’.

Regards,
CVH

1470QCAD (main)Feature RequestLowDouble line tool requestAssigned
0%
3 Task Description

I would love to have a ‘Double Line’ tool in QCAD.

For me this would be such a time saver when drawing out building floor plans in QCAD.

972QCAD (main)Feature RequestLowDistribute equally option ...Assigned
0%
6 Task Description

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

625QCAD (main)Feature RequestLowDistribute block along spline, polyline, ...Assigned
0%
1 Task Description

See:
http://www.youtube.com/watch?v=27bCgg3zLVA

1372QCAD (main)Feature RequestLowDistance Point to Point - option for 'added' distancesAssigned
0%
2 Task Description

It would be useful to have an additional option to be able to count/add up consecutive distances measured with this tool ;)

2337QCAD (main)Feature RequestLowDistance information should be available in 2D and 3DAssigned
0%
Task Description

As per https://qcad.org/rsforum/viewtopic.php?f=32&t=9089, I suggest to extend the distance information tools:

* show Delta Z (at least when any of the elements has Z information)
* allow switching between 2D and 3D distance
* maybe allow to show both
* maybe change the text to distinguish between them (”Distance” → “Distance 2D/3D”)

936QCAD (main)Feature RequestLowDisproportional scaling of block referencesAssigned
0%
Task Description

XP/32

... doesn’t works proper at circles and ellipses.

Circles: the scale works only proportional even though I have the options for x and y.
Ellipses: The same but if I play around with the x, y fields it will freeze the scale possibility.

622QCAD (main)Feature RequestLowDisproportianal scaling of arcs, ellipsesAssigned
0%
Task Description

Support disproportional scaling also for arcs, ellipses, other entities, not only lines and polylines with only line segments.

756QCAD (main)Bug ReportLowDisplay problem in the Text "Character Map" ...Assigned
0%
1 Task Description

XP/32

Go to:
Text → Special Characters → Others → “Character Map” pops up.
Adjust Zoom to 100% = display problem (not enough space for the single character.

952QCAD (main)Feature RequestLowDimensions: manually control arrow positionAssigned
0%
3 Task Description

See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.

The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.

1510QCAD (main)Feature RequestLowdimensioning, rounded valuesAssigned
0%
Task Description

Approximation value for dimensioning, i.e. for example:
approximate to .5
measured valure 11.3456 > displayed value 11.5

1698QCAD (main)Feature RequestLowDimensioning - add option to split dimensionsAssigned
0%
Task Description

Dimensioning - add option to split dimensions.

To have an option to split the extension lines if they run over other entities.

1699QCAD (main)Feature RequestLowDimensioning - add option to insert text in the middle ...Assigned
0%
Task Description

Dimensioning - add option to insert text in the middle of dimension.

To have an option to have text aligned in the middle of the dimension line, rather than above it.

1697QCAD (main)Feature RequestLowDimensioning - add option for horizontal text alignmentAssigned
0%
Task Description

Dimensioning - add option for horizontal text alignment.

Basically an option in drawing preferences to align text horizontally instead of vertically.

901QCAD (main)Feature RequestLowDimension text stylesAssigned
0%
Task Description

Support custom dimension text styles for imported DXF / DWG files.

1488QCAD (main)Feature RequestLowDimension text positionAssigned
0%
7 Task Description

This one is a really important one for me, as currently I am doing a lot of dimension and annotation drawings.
I would like to request an option to be added to the dimension settings for both drawing and application settings to be able to choose whether the dimension text is to the right or left side or over the top or underneath the dimension line.
This would help tremendously when a lot of dimensions are needed!

Regards

Clive

1157QCAD (main)Feature RequestLowDimension settings - arrowhead styleAssigned
0%
3 Task Description

A ‘non -filled’ arrowhead would be good to have also.

2405QCAD Community EditionBug ReportLowDimension scaling not workingAssigned
0%
Task Description

I’m using QCAD Community Edition 3.27.7 on Windows 11.

When I started my drawing, I was able to change the size scale factor of (existing) dimensions using “Edit/Drawing Preferences/Dimension/Dimension Settings/Size scale factor”. However, suddenly this feature stopped working and now I cannot switch the dimension scale factor any longer.

I used this feature to be able to adapt the scale factor of the dimensions when printing in different scales.
I.e. all my drawings are in “original” size but when it comes to printing, I print some parts in scale 1:2 (in which case I used to set the size scale factor of the dimensions to 2) and some parts in scale 1:10 (in which case I used to set the scale factor of the dimensions to 10). Using this procedure, the dimensions have the same size (font size, arrow size, gaps etc.) on both drawings.

I have attached the drawing, that shows the described issues.

1714QCAD (main)Feature RequestLowDimension > Diametric: improve display when label is mo...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408

757QCAD (main)Feature RequestLowDim: Architectural tick and Leader Arrow size independe...Assigned
0%
1 Task Description

Leader Arrow size and the Architectural tick size are controlled by one and the same value.

It would be nice to get the possibility to adjust them independently from each other ...

2216QCAD (main)SuggestionLowDIM modification cause overlapping textAssigned
0%
1 Task Description

When I modify partly a DIM with “Stretch” or changing one Extension line position with drag and drop the Value text is updated which is nice working. Unfortunately the previous value stays in place and is overwritten by the actual value. I think for a good readability the previous value should disappear in the moment when the new value is presented.

2099QCAD (main)Bug ReportLowDIM Label, Square Symbol doesn't adopt layer attributesAssigned
0%
Task Description

The square symbol offered as symbol in DIM label is the only symbol which doesn’t adopt the layer color.
If I print a drawing in full color it leads to a black symbol in an otherwise colored dimension.

It is also the only symbol which has a solid filling what is confusing when you work with it in Model_Space ...

617QCAD (main)Feature RequestLowDifferent dimensions font sizes in the same drawing.Assigned
0%
Task Description

Different dimensions font sizes in the same drawing.

1934QCAD (main)Feature RequestLowDiametric text - overlaidAssigned
0%
Task Description

Diametric text is always placed above a horizontal measurement.

I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.

To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.

A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.

Similarly for a vertical measurement, the text is overlaid and illegible.

When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).

Kind regards
Simon

2060QCAD (main)Feature RequestLowDialog box for Layer StatusAssigned
0%
1 Task Description

So far, layer status has only been implemented very rudimentarily.
I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.

923QCAD (main)Feature RequestLowDiagramming (Intelligent Orthogonal Connectors)Assigned
0%
2 Task Description

Hi,

With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.

1723QCAD (main)Feature RequestLowDetecting overlapping line / arc segmentsAssigned
0%
4 Task Description

Add a tool to detect overlapping segments or lines and arcs.
Similar like the “overkill” command in other CAD systems.

1503QCAD (main)Feature RequestLowDetect duplicates within a given selection -new tool re...Assigned
0%
1 Task Description

It would be so useful to have an option to be able to detect duplicates within a given selection.

986QCAD (main)Feature RequestLowDetect duplicates - only on selected areaAssigned
0%
1 Task Description

It would be useful to have an additional option to only detect duplicates on user defined selection of drawing.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145

2295QCAD (main)Feature RequestLowDeselect all with Escape keyAssigned
0%
Task Description

I’m used to have persistant selection while drawing (Application Preferences > Graphics View:Appearance > Selection), but I’m missing deselection of all objects with ESC key. I have seen the option to deselect with right key, but it’s nice to have right key for context menu.

Currently ESC key cancels current active command, but would be nice if there is no command active to also deselect all features by default.

962QCAD (main)Feature RequestLowDefault save / open directoriesAssigned
0%
1 Task Description

Add the option to use a fixed path for the save to, open and CAM export directories.

(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)

990QCAD (main)Feature RequestLowDefault Names for Custom Property ...Assigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

It would be nice to have in “Application preferences” the possibility to predefine a couple Custom Property Names.
Right now I use the Custom Property function to add a DIN and the Material info to every Block. This project has a lot of DIN parts and I have to type again and again the names DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... you got my point ;-)

If I have predefined Names - I have just to fill out the value :-)

1833QCAD (main)Feature RequestLowDeep synchronize attributes featureAssigned
0%
1 Task Description

There is the Synchronize attributes feature which works well. But It affects only block references in the active layout(modelspace, block layout). If I want to synchronize attributes of block references in in another blocks, i have to manually go through all blocks and run synchronize attributes feature. That is the reason I would like to modify Synchronize attributes feature to affect all block references in a drawing, or add new Deep synchronize attributes feature.

2296QCAD (main)Feature RequestLowCustom font type and size for command line widgetAssigned
0%
Task Description

Would be nice to change default font type and size for command line widget.

2551QCAD (main)Bug ReportLowCursor and visualization problemsAssigned
0%
Task Description

The last version (3.29.4) present a very important issue.
When we work with a “complicated” file (about >1MB or up see attachment test.dwg) the cursor and selected object not work fine after move some layout windows in Paper_Space: disappear coordinates informations and snap nodes. (see attachment before.png an after.png)
This issue is present in all Qcad version (Linux, Mac-intel, Mac-silicon, Windows).
The last working-fine version is 3.28.2
I’m a enthusiastic Qcad user and I hop that this issue will be fixed early!
Regards
Arch. Riccardo Beduschi

2070QCAD (main)Feature RequestLowcropping imageAssigned
0%
4 Task Description

It may be useful to insert the “image cropping” function both in top / bottom - right / left mode, and with polyline

1843QCAD/CAMBug ReportLowCreating ToolPath StallsAssigned
0%
Task Description

Hi Andrew,

Still working with and on CAM HPGL for the HP7580 pen plotter.

I have added a penplotter test drawing, that might be used for testing en callibrating plotter and pens. You may add it to the Examples-directory.

QCAD has a lot of trouble creating toolpaths and exports. Much too often it shuts itself down, or gets stalled. Why? I am not sure.

805QCAD (main)Feature RequestLowCreate tool radius compensation / tool path generationAssigned
0%
Task Description

This is how I would implement this:

This would be a modification tool. Parts are selected, a toolpath is generated, and a dialog pops up to allow putting the tool path into an existing layer, a new layer, or replace all drawings in an existing layer.

This is how the toolpath is generated:

We iterate through all elements and explode everything but text into line segments. Then we connect the line segments into chains wherever the line endpoints are less than some tolerance away from each other. The chains can be very chaotic, but at least we have separate entities for now.

For every chain, we need to find the largest complete loop. A good drawing would only contain non-overlapping loops, but we can’t expect that. Everything that is not on this loop can not be defined as a part or as a hole, so we will merely create a tool path segment that is equivalent to the line segment. Every segment that *IS* on a loop is either an outside edge (part outline), or an inside edge (hole outline), (or overlapping, in which case it is neither, and we have an operator problem).

In a perfect world, we need to find exactly which shape is inside which other shape, and then create alternating tool offsets from the outmost loop (part edge) to the second outmost (hole), to the next (part) etc. .

In a simplified world, we can used the bounding box of the loop instead. This works OK for rectangular shapes, but a circle next to an “L” shape could be seen as inside the L’s bounding box, hence inside the L, wrongly accused of being a hole, not a part.

Now all that is left to do is to create a new loop, offset by the tool radius. Oh, and since we have the connections from line segment to line segment in the correct order already, we can use the opportunity to order all cutting loops from inner to outer, or from small to large, and order non-loop edges by travel distance.

The new drawing in the new layer can now be exported without further hassle to create a nice laser cut file.

PS: of course, a user could create multiple layers for marking, cutting, enraging, etc. . Additional Layer attributes for cutting speed and laser power (and a few more) would be needed.

2266QCAD (main)Bug ReportLowCrash while creating an angular dimensionAssigned
0%
Task Description

no task description

2381QCAD (main)Bug ReportLowCrash when modifying toolbar settingsAssigned
0%
Task Description

QCAD Professional 3.27.6.0 running on macOS 12.4 (21F79)

QCAD sometimes crashes when I am adding or removing items from toolbars. It isn’t consistent and I haven’t seen a pattern about which items trigger the crash. It has happened while editing different files, but I’ve attached attached a very simple example and two crash reports

2092QCAD (main)Bug ReportLowcrash when changing shortcut in preferencesAssigned
0%
Task Description

The application crashes when I try to change a shortcut in the preferences. And only after resizing the preferences window.
In the attachement are the cli warnings.
I also tried the 3.24.3.9 snapshot with the same result.

2315QCAD Community EditionBug ReportLowCrash after ~10-th times move Spline nodesAssigned
0%
Task Description

1. Create spline
2. Move spline nodes. After ~10 times move qcad is crashed with backtrace:
Thread 9 “Thread (pooled)” received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fff56dc9640 (LWP 8224)]
0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848) at /usr/include/qt5/QtCore/qlist.h:492
492 current→v = new T(*reinterpret_cast<T*>(src→v));
(gdb) bt
#0 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848)

  at /usr/include/qt5/QtCore/qlist.h:492

#1 QList<QSharedPointer<RShape> >::detach_helper (alloc=<optimized out>, this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:835
#2 QList<QSharedPointer<RShape> >::detach_helper (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:849
#3 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178
#4 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178
#5 0x00007ffff686182a in QList<QSharedPointer<RShape> >::end (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/qlist.h:342
#6 QList<QSharedPointer<RShape> >::last (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:364
#7 RSpline::appendToExploded (this=0×555557311510, line=...) at math/RSpline.cpp:964
#8 0x00007ffff6867059 in RSpline::getExploded (this=0×555557311510, segments=1457293328) at math/RSpline.cpp:919
#9 0x00007ffff686682a in RSpline::getLength (this=this@entry=0×555557311510) at math/RSpline.cpp:1026
#10 0x00007ffff6c11490 in RSplineData::getLength (this=<optimized out>, this=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineData.h:178
#11 RSplineEntity::getProperty (this=0x5555573114a0, propertyTypeId=..., humanReadable=<optimized out>, noAttributes=<optimized out>,

  showOnRequest=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineEntity.cpp:253

#12 0x00007ffff67cc214 in RPropertyEditor::computePropertyValue (ccProp=...) at /usr/src/debug/qcad-3.27.0.0/src/core/RPropertyEditor.cpp:574
#13 0x00007ffff67d298f in QtConcurrent::FunctionWrapper1<void, RProperty&>::operator() (u=..., this=0x555557757f18)

  at /usr/include/qt5/QtConcurrent/qtconcurrentfunctionwrappers.h:80

#14 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIteration (it=..., this=0x555557757ee0)

  at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:68

#15 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIterations (this=0x555557757ee0,

  sequenceBeginIterator=..., beginIndex=<optimized out>, endIndex=15) at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:77

#16 0x00007ffff67d2c9d in QtConcurrent::IterateKernel<QList<RProperty>::iterator, void>::forThreadFunction (this=0x555557757ee0)

  at /usr/include/qt5/QtConcurrent/qtconcurrentiteratekernel.h:255

#17 0x00007ffff44b5b2d in QtConcurrent::ThreadEngineBase::run (this=0x555557757f20) at qtconcurrentthreadengine.cpp:302
#18 0x00007ffff59c8d52 in QThreadPoolThread::run (this=0x555556198b10) at thread/qthreadpool.cpp:100
#19 0x00007ffff59c5a61 in QThreadPrivate::start (arg=0x555556198b10) at thread/qthread_unix.cpp:329
#20 0x00007ffff546c717 in start_thread (arg=<optimized out>) at pthread_create.c:435
#21 0x00007ffff54f018c in clone3 () from /lib64/libc.so.6
(

1977QCAD (main)Feature RequestLowCorresponding coordinate format Assigned
0%
1 Task Description

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

2354QCAD (main)Feature RequestLowcopy-paste between two QCAD instancesAssigned
0%
2 Task Description

Hello,

I’ve quite often the task to transfer changes from one set of drawings to another (similar) set.
My ideal setup would be to open one set in one window and the other set in another window.
Both windows would be arranged side-by-side (larger monitor).
Changes would be copy-pasted from one set to the other.

From #2352 I’ve learned that there is a command-line option to achieve this.

Unfortunately it’s not possible to copy-paste between these instances.

And yes, it’s important to do this in two windows to see both versions at the same time.
So, tabs are not the answer.

It’s also ok if i could detach a tab from one instance and arrange it aside of the main window (like the property editor).
Than all data transfers would happen inside the same instance.

Best regards,
Klaus

579QCAD (main)Feature RequestLowCopy layers / blocksAssigned
0%
2 Task Description

Duplicate (copy, clone) a layer with or without entities on it. New name can be specified by user.

503QCAD (main)Feature RequestLowConvert entities to points with a fixed distanceAssigned
0%
Task Description

Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.

See also forum at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834

2157QCAD (main)Bug ReportLowControlpoint Spline exploded to polyline may induce NaN...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Documented in 3.25.2.4, reproducible under 3.25.2.7
In the attached file:
→ Explode the trial cases and locate NaN Widths.
→ These faulty widths are cleared while saving and reverting.
= work around.

Related Post: https://www.qcad.org/rsforum/viewtopic.php?t=7902#p30902
Related Topic: https://www.qcad.org/rsforum/viewtopic.php?t=7901
Related Commit: https://github.com/qcad/qcad/commit/fcd7929bced7ae328029c1aa2ee2aff2745709c6

Arctic_Eddie reports failing CAM offset at exactly these points !!!
Reported is a faulty arc with radius of over 360,000mm.
- I can not reproduce this under QCAD working further on the Polys with NaNs.
- However the direct offset of such controlpoint Splines is erroneous.
(see file in post 30902)

Arctic_Eddie reports arc radii of over 10,000mm.
- These don’t seem to be faulty.
- I agree that BiArc fitting should be bound to a lower and certainly to an upper limit.
- That should be huge otherwise faint curvature is represented by many
wobbles or too quick by straight lines.
(All this, keeping in mind that QCAD doesn’t return the optimum fitted BiArc, see: https://www.qcad.org/rsforum/viewtopic.php?t=4859)

Regards,
CVH

Showing tasks 351 - 400 of 519 Page 8 of 11<<First - 6 - 7 - 8 - 9 - 10 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing