QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
1224QCAD (main)Feature RequestLowRevision cloudsLikely to be implemented
0%
2 Task Description

Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.

1285QCAD (main)Feature RequestLowProperty PainterResearching
0%
2 Task Description

Easy transfer of properties from one entity to others

1302QCAD (main)Feature RequestLowIsometric projection on the current layerAssigned
0%
2 Task Description

It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.

1345QCAD (main)Feature RequestLowAdded option to paste a number of entities with even/eq...Assigned
0%
2 Task Description

Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&p=14209&sid=162973e4a12f58c8116299b62673a520#p14209

An additional option would be useful to paste any given entity a set number of times with even/equal gaps in between.

1356QCAD (main)Feature RequestLowOption to lengthen/Shorten from both ends of entity at ...Assigned
0%
2 Task Description

It would be helpful to have the added option to lengthen/Shorten from both ends of entity at the same time.

1362QCAD (main)Feature RequestLownew layer tool: Toggle visibility allAssigned
0%
2 Task Description

Hi,

I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go.
Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.

The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.

And I’m confident - there are many more useful scenarios for a tool like this one ... ;-)

pics: “Toggle visibility all” with one click:

1364QCAD (main)Feature RequestLowNew Tool -'Run Parallel with'Assigned
0%
2 Task Description

New Tool request:

When drawing a line it would be good to have a tool/option to ‘run parallel with’.

For example start to draw a line and choose ‘run parallel with’, select appropriate line to draw parallel with!

1488QCAD (main)Feature RequestLowDimension text positionAssigned
0%
2 Task Description

This one is a really important one for me, as currently I am doing a lot of dimension and annotation drawings.
I would like to request an option to be added to the dimension settings for both drawing and application settings to be able to choose whether the dimension text is to the right or left side or over the top or underneath the dimension line.
This would help tremendously when a lot of dimensions are needed!

Regards

Clive

1628QCAD (main)Feature RequestLowMove / Copy and snap tangentialAssigned
0%
2 Task Description

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601

1721QCAD (main)Feature RequestLowInsert table toolAssigned
0%
2 Task Description

Hi Andrew,

I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)

Many thanks

Clive

228QCAD (main)Feature RequestLowInsert current date (and other fields)Assigned
0%
1 Task Description

Insert filed into drawing that displays current date, file name, ...

316QCAD (main)Feature RequestLowBlocks list and selected blockAssigned
0%
1 Task Description

Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?

(Feature request sounds a little harsh, enhancement proposal would seem more apt.)

467QCAD (main)Feature RequestLowFeature request for new Arc tool option to add to Arc s...Assigned
0%
1 Task Description

For and behalf of mandrena

To add another Arc tool option in Arc tools set:

1.Specify Start point for Arc.
2.Specify End point for Arc.
3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!

502QCAD (main)Feature RequestLowPoints on line: enter distance instead of number of poi...Assigned
0%
1 Task Description

Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.

598QCAD (main)Feature RequestLowSupport tangents between ellipsesAssigned
0%
1 Task Description

To add support for drawing tangents between ellipses.

See topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003

617QCAD (main)Feature RequestLowDifferent dimensions font sizes in the same drawing.Assigned
0%
1 Task Description

Different dimensions font sizes in the same drawing.

620QCAD (main)Feature RequestLowoption to have horizontal dimension info using vertical...Assigned
0%
1 Task Description

Some times I need to have the dimension info using the Vertical Dimension tool displayed horizontally.
See attached image:
Possibly this option could be added to the Label drop down menu.

625QCAD (main)Feature RequestLowDistribute block along spline, polyline, ...Assigned
0%
1 Task Description

See:
http://www.youtube.com/watch?v=27bCgg3zLVA

661QCAD (main)Feature RequestLowAdd support for the DGN formatAssigned
0%
1 Task Description

See OpenDesign news:
“ODA consolidates support for .dgn and .dwg file formats in Teigha”

675QCAD (main)Feature RequestLowOption for fixed Text and Dimension heights ...Assigned
0%
1 Task Description

I think it would be nice to have the possibility to decide a fixed Text and Dimension (inclusive Arrows) height what is not affected by the Print scale. That means: If I have a given height of 3,5mm it will always be printed with 3,5mm - no matter what the scale for the printing is.
Yes, I see also the problem that I could run in space problems after I twitch to the Print preview - but that will also happen when I change the Text hight in the preferences for a 5:1 printing.
Maybe this Feature Request doesn’t looks important if you are usually working with Metric Units but if you have to handle Imperial Units then it is a pain in the back to make always the calculation to get the same heights.
Try it by your self; 3,5mm = 0.137795” = 1”:1” Now I like to print it in 1”:256” ops - to small - ok 1”:64” ... no, to big, maybe 1”:128” .......and QCad can’t remember the previously numbers. ;-)

680QCAD (main)Feature RequestLowAdditional Export function for Sketchup etc. ....Assigned
0%
1 Task Description

Additional Export function for export/import into 3D Programs like Sketchup etc. (file types like .dae, .3ds, .ddf, .skp).

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2176

681QCAD (main)Feature RequestLow'Plug-in' for Gear generatorAssigned
0%
1 Task Description

Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc...
To produce 2D templates for all sorts of projects.

720QCAD (main)Feature RequestLowLocked Blocks ....Assigned
0%
1 Task Description

It is nice that I can scale or rotate a block - but right now I see also a big plus in a kind of locking function for Blocks.
It would be nice to have a “locked” option ad least for the scaling of blocks.

Example: Think about Clives “Radiator ‘Cover’ screen” http://www.qcad.org/rsforum/viewtopic.php?f=51&t=2060 and how you could manipulate this screen with “scale blocked blocks” ;-)

734QCAD (main)Feature RequestLowPossibility to distribute a selection equal to each oth...Assigned
0%
1 Task Description

It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...

Screenshot:
First row: Befor / Second row: after

770QCAD (main)Feature RequestLowPolyline tool to delete segments between two nodes, lea...Assigned
0%
1 Task Description

I guess this is a case of wording and wrong expectations.

The polyline tool “Delete Segments between two nodes” removes nodes, but not segments as the title and the icon suggests.

I propose to rename it to “Delete Nodes between two nodes”.

A tool which actually removes line segments from a polyline, leaving gaps, could indeed be useful to some users.

I think of a straight polyline with several segments. Then I remove some segments. I end up with a polyline with “holes” in it. Now I could stretch that polyline and all the remaining segments and holes stretch proportionally. Could be handy some times.

774QCAD (main)Feature RequestLowAdditional Button in the Blocklist menu for "Create Blo...Assigned
0%
1 Task Description

If I work in QCAD only with Toolbars (and not with the “Cad Tools” there is nowhere a Button to find for “Create Block from selection”.
If I have to create a Block based on a selection I have to work with the Menu or have to activate the Cad Tools.

But, if I look at the Blocklist menu there is a function (+) to add an empty Block. It would be nice to have this button working for both situation - empty Block or depending on a selection to “Create Block from selection”.

Or alternative an additional Button ... :-(

Anyway - in my opinion would that make the “Blocklist” complete. :-)

776QCAD (main)Feature RequestLowExtra ' isometric' buttons for using Line from Angle.Assigned
0%
1 Task Description

When working with the isometric grid (in any projection - Top, Right, Left) and drawing from ‘scratch’ as it were, without using the projection tools - I find myself using ‘Line from Angle’ the most.

It would be extreamly useful to be presented with two extra buttons when using this tool, a 30 degree button and a -30 degree button, this way I wouldn’t need to keep typing in the angle difference here.

Regards

Clive

786QCAD (main)Feature RequestLowMulti - Breakout toolAssigned
0%
1 Task Description

A ' Multi ' Breakout tool or added option to the existing Breakout tool.

For example see attached image.

An option to remove all segments within a chosen boundary would be good, in my example I want to remove all the hatching within the Red circle.

So after exploding the Hatch, currently I have to remove all segments singularly!

Of course I could have placed the circle first and hatched around it - but in this and most instances it is easier to design and to produce the Hatching first and then place my circle/shapes etc.

788QCAD (main)Feature RequestLowExtra option to detect duplicates only in user defined ...Assigned
0%
1 Task Description

It would be very useful to have an extra option to only detect duplicates within a user defined area.

798QCAD (main)Feature RequestLowelaborate on purge toolAssigned
0%
1 Task Description

Modify the “purge layer” tool to preserve empty layers with a locked status.
see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386

817QCAD (main)Feature RequestLowSnap and cut all intersection in a given area tool ...Assigned
0%
1 Task Description

As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch.
To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries.
The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....

Clive mentioned on this:
Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.

823QCAD (main)Feature RequestLowAdd Midpoint Handles to Lines and PolylinesAssigned
0%
1 Task Description

The Midpoint Handles should be used to move Polyline Segments and lines. This would add easy to access stretch functionality.
Combined with a shortcut(hold down shift or alt etc.) to fix the movement to be orthogonal to the line this would bring a lot of extra value.
It would also be possible to to have another shortcut to easily insert nodes to Polylines (again hold shift or alt etc.)

839QCAD (main)Feature RequestLowGrid / Meta Grid info + Drawing Unit Info ...Assigned
0%
1 Task Description

At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings.
It would be nice to have additional the Info for the drawing unit ...

849QCAD (main)Feature RequestLowMake maximum visible reference points of selection conf...Assigned
0%
1 Task Description

Provide configuration option to raise / lower maximum reference points that are shown for selected entities (currently fixed to 1000).

Original report:

Imported a spline-dxf from adobe illustrator. Converted the spline to polyline with explode command. Then no anchor points / vertex points / vertices were showing anymore. Simplified the polyline so that it had less than 1000 points. Vertices became visible.

I think some freeform objects need actually more than 1000 vertices. Also them need to be edited. Please increase the amount of vertices showing to biginteger

regards

Benjamin

860QCAD (main)Feature RequestLow"Create Library item from selection" default Path ...Assigned
0%
1 Task Description

Default Path for “Create Library item from selection” / “Save us” is C:\Programme\QCAD pro 3.1.6 ...
... regardless of the settings in the “Application Preferences / Library Browser / for Library Sources.
And QCAD doesn’t remember the last path choice ....

If I have to save 50 Library Items I have to navigate 50 times thru my system to find - the same place.

It would be nice if QCAD would point in first place to the Library Source or, at least, remember the last used path ... ;-)

923QCAD (main)Feature RequestLowDiagramming (Intelligent Orthogonal Connectors)Assigned
0%
1 Task Description

Hi,

With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.

927QCAD (main)Feature RequestLowFurther options for the 'Add Measurement' toolsAssigned
0%
1 Task Description

Absolutely love the new options for adding the measurements in the current drawing.

I would like to see an additional option for only adding the text and not the lines also, maybe a simple check box would suffice here.

Of course at the moment I am able to use the property editor to select only the lines and move to a new layer and hide!

962QCAD (main)Feature RequestLowDefault save / open directoriesAssigned
0%
1 Task Description

Add the option to use a fixed path for the save to, open and CAM export directories.

(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)

1021dwg2pdfFeature RequestLowdwg2pdf: switch to set block to exportAssigned
0%
1 Task Description

Add a command line switch to dwg2pdf to export a given block instead of “*Model_Space”.

1023QCAD (main)Feature RequestLowArrange points on a plan according to variation of dist...Assigned
0%
1 Task Description

Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances

1044QCAD (main)Feature RequestLowRadian measure symbol for Geometry labeling ...Assigned
0%
1 Task Description

We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...

It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.

1051QCAD (main)Feature RequestLowInfo tool, polygonal area, possibility for a postfix la...Assigned
0%
1 Task Description

... would be nice.

If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².

I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ... ;-)

1071QCAD (main)Feature RequestVery Low(Bitmap) scaling convenience optionAssigned
0%
1 Task Description

This can be done as is in QCAD today, but a quick convenience UI bit would be much appreciated.

Suppose you are working off a bitmap image (transcribing old scan, or you got your apartment’s floor plan like this, because, uh, what tenant needs DXF). It has dimensions markers and everything, but fat chance it’ll be to actual CAD scale after importing.

So, to bring it to scale, you measure between two tick marks on the scale, compute ratio based on measurement and what’s written on the dimension line, and do a scale operation (you can also have QCAD compute the ratio by using math expression, whatever).

That works fine.

A purely just for convenience function to do that would be much appreciated: pick two points, enter what the actual distance between them is, poof bam, appropriate scaling operation is applied.

As a twist, there could be some other bitmap skewing options, like “the points I’ve selected are on a horizontal/vertical line/at an angle of X degrees, then the bitmap would also be applied this transform.

1092QCAD (main)Feature RequestLowNew tool: draw trace entitiesAssigned
0%
1 Task Description

Add tool to construct new trace entities.
Trace entities can currently only be loaded from DXF/DWG.

1099QCAD (main)Feature RequestLowAdd Leader with text and number bubbleAssigned
0%
1 Task Description

Having leader with numbers and text would be awesome to better interact with the drawing and making BOM lists.

Currently it takes too mush time to make the leaders with text and number bubbles.

1100QCAD (main)Feature RequestLowAdd drag dimension (snap) along dimension lineAssigned
0%
1 Task Description

In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.

This is very useful when the two lines the needs a dimension are close together, or overlapping with another.

Attached is two images one for autocad and one for Qcad

1102QCAD (main)Feature RequestLowRay reference pointAssigned
0%
1 Task Description

Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.

It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.

1127QCAD (main)Feature RequestLowLeaders: spline shapedLikely to be implemented
0%
1 Task Description

Add support for spline shaped leaders

1128QCAD (main)Feature RequestLowText: automatically wrap text at text box widthAssigned
0%
1 Task Description

Add support for automatic text line wrapping for multiline text entities.

1154QCAD (main)Feature RequestVery LowAdd preference for round reference pointsAssigned
0%
1 Task Description

This one is purely cosmetic, instead of square reference points would it be possible to have the choice of either square or round with size?

Showing tasks 101 - 150 of 374 Page 3 of 8 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing