QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  descSeveritySummaryStatusProgress
1625QCAD (main)Feature RequestLowCopy LayerAssigned
0%
Task Description

Hi,

often I’m in the situation that I have to create an additional Layer mostly based on the settings from an already existing Layer. Just a question of organization. This new Layer has then everything identical except the name and one(?) Attribute. This could be that only the color or the Line weight deviates.

Example:

Existing Layer

Layer name: Lot 47 area existing

Attributes

Color: Red

Lineweight: 0.35

Linetype: Dashed


New Layer

Layer name: Lot 47 area proposal

Attributes

Color: Blue

Lineweight: 0.35

Linetype: Dashed

Unfortunately if done manually it happens in an blink of an eye that the human imperfection (me!) makes a mistake and (e.g.) a “Center (.5x)” finds it way into the Linetype Field instead of a “Center (.2x)” .... :-(

The workaround for a few User is to use in cases like this the Property Editor / General Property and customize single Attributes. In my opinion the first step to lose the control over your own drawing ...

A “Copy Layer” / Copy Layer Attributes” function would speed up this task and eliminate to a minimum the “human imperfection” factor.

I could imagine that a right click (like copy block) on the Layer triggers the “Add Layer” function and the dialog is already prefigured with the Settings of the Source Layer ...... ready for editing.
The new Layer itself is “empty” like any other new Layer.

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1627QCAD (main)Feature RequestLowrevision cloudAssigned
0%
Task Description

how do i draw revision cloud in Qcad pro
or when do you will implemented it

1628QCAD (main)Feature RequestLowMove / Copy and snap tangentialAssigned
0%
3 Task Description

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601

1629QCAD (main)Feature RequestLowAdd additional Option to Angelur DIM ToolAssigned
0%
Task Description

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

1632QCAD (main)Feature RequestLowOption to add bespoke dimension precision + tolerance s...Assigned
0%
Task Description

Hi Andrew,

1. I cannot find a way of selecting individual dimensions and changing the precision lets say from 0.00 to 0.000 for these particular dimensions only without affecting all the rest of the dimensions in the drawing - could an option be added for doing this in the property editor or not?

2. Would it be possible to add an option in the drawing preferences so that automatically a symbol is added at the correct placement fo all dimensions, in this case a tolerance plus/minus symbol?

Many thanks

Clive

1645QCAD (main)Feature RequestLowAdd warning when opening file with 3D contentAssigned
0%
Task Description

Hi.

I’m working currently a lot with files coming from rhino. Qcad can open them properly any also most operations on them work as usual - except the selection methods.

box select from upper left to lower right works as usual.
double click to select all connected entities is broken. (only one entity is selected).
box select from lower right to upper left does not select entities touching the selection box. (nothing is selected)

on mac os nothing is selectable with single click.
on linux single click sometimes fails (nothing is selected after clicking on a line).

thanks for looking into this :)

Martin

1647QCAD (main)Feature RequestLowAdd point / dot option for leaders Assigned
0%
Task Description

Hi Andrew,

Hopefully you might be able to squeeze this one around your busy schedule.

Would it be possible to add in the property editor an option to change a dimension arrow to a point / filled dot and maybe also a tick?

I see you are working on some viewport stuff, I am very much looking forward to testing some of this out ;).

Many thanks

Clive

1649QCAD (main)Feature RequestVery LowAdd configuarable format options for saving blocks to l...Assigned
0%
Task Description

Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.

1651QCAD (main)Feature RequestLowChange thickness of arch tick for dimensioningAssigned
0%
Task Description

An option in the drawing preferences to change the line thicknesses for arch ticks would be a huge plus, at the moment I am having to insert ‘arch tick’ blocks for this.

1663QCAD (main)Feature RequestLowFeature Request: Export Layers as New DrawingAssigned
0%
1 Task Description

Hi!

in many tasks in qcad I ended up exporting one or several layers into individual files for some cnc jobs or further processing. So the steps I usually do are:

  • select all elements on the layer
  • paste into new drawing
  • sometimes rename layer names or attributes
  • adjust dimension settings
  • save and give name for drawing

Sometimes I have up to 100 layers I need to export like this, so an automatic export for all would be time saving too. But very often a “single click” export method would also help a lot. (e.g. inside the layer list an entry in the right click menue like “save as new file”). Also a multiple selection would be handy if more that one layer should end up in the new file. (e.g. select the three layers that need to be in the new document, then right click and save as new file). Maybe this is too much of changes needed inside the layer list - so something like a separate layer export dialogue would make sense.

When exporting many layers some variables for automatic naming of layers and filename would make sense e.g. user can specify basename_%L.dxf to get the basename_layername.dxf or just an increasing number.

For layers and attributes it is often needed to give a layer a certain name or color for different cnc processes (e.g. engraving and cutting for lasers) or to put everything on layer “0” because of some old CAM software that only supports content on layer 0.

probably many more details would make sense that I didn’t think of yet...

kind regards
Martin


1666QCAD (main)Feature RequestLowDraw > Line > Relative Angle / Orthogonal: define lengt...Assigned
0%
Task Description

Add option to define length (end point) using mouse pointer.

If reference point is “Middle”, extend line from middle in both directions to mouse cursor (?).

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5205

1673QCAD (main)Feature RequestLowLayouts and Viewports: support polygonal viewportsAssigned
0%
1 Task Description

Add support for polygonal viewports

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1674QCAD (main)Feature RequestLowLayouts and Viewports: duplicate layout blockAssigned
0%
1 Task Description

Duplicate layout blocks

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1676QCAD (main)Feature RequestLowModify > Explode: explode lines / arcs with line patter...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4333

1681QCAD (main)Feature RequestLowAuto-dimensioningAssigned
0%
Task Description

You can apply the command to Lines, PolyLine segments, Arcs, Circles, and Rings:

For linear entities parallel to an axis of the coordinate system, aligned Dimensions (parallel Dimensions) are created. For linear entities not parallel to an axis of the coordinate system, either aligned Dimensions (measuring the absolute distance between two points) or horizontal or vertical Dimensions (measuring the horizontal or vertical distance between two points) depending on where you move the pointer are created.

For curved entities, you can create radial, diameter, linear, angular, and arc length Dimensions.

To dimension entities:

Click Dimension > Auto (or type AutoDimension).
In the graphics area, select an entity to dimension.
Click to place the dimension line.
To use another dimension type for Circles or Arcs, specify an option:
Diameter. Creates a diameter Dimension.
Radial. Creates a radial Dimension for an Arc or Circle.
Linear. Creates a linear Dimension of the diameter of a Circle or an aligned, horizontal, or vertical Dimension between the end points of an Arc.
Angular. Dimensions the angle between the end points of an Arc.
Arc length. Dimensions an Arc length.
Note: The chosen option is the default the next time you use the AutoDimension command.

When you move the pointer during a linear dimensioning, you can:
Lock. Determines the current dimension type (aligned, horizontal, or vertical) regardless where you move the pointer.
Unlock. Unlocks the type of linear dimension used.
Press Enter.

***
In short, when you use this tool you click on an entity and it will know what dimension you’re looking for. For Circles, you can specify in the command window R or D for Radius or Diameter.
This would be extremely useful on large drawings where a lot of dimensioning is to be done. One tool and start clicking on entities for dimensioning.

1697QCAD (main)Feature RequestLowDimensioning - add option for horizontal text alignmentAssigned
0%
Task Description

Dimensioning - add option for horizontal text alignment.

Basically an option in drawing preferences to align text horizontally instead of vertically.

1698QCAD (main)Feature RequestLowDimensioning - add option to split dimensionsAssigned
0%
Task Description

Dimensioning - add option to split dimensions.

To have an option to split the extension lines if they run over other entities.

1699QCAD (main)Feature RequestLowDimensioning - add option to insert text in the middle ...Assigned
0%
Task Description

Dimensioning - add option to insert text in the middle of dimension.

To have an option to have text aligned in the middle of the dimension line, rather than above it.

1700dwg2pdfFeature RequestLowdwg2pdf: output multiple layoutsAssigned
0%
Task Description

Add support to specify multiple blocks (layouts) to output (one per page).

1701QCAD (main)Feature RequestLowLayer List / Block List: add filter inputAssigned
0%
Task Description

Add text filter for layer list, block list.

1702QCAD (main)Feature RequestLowDraw > Polyline: add boolean operationsAssigned
0%
Task Description

Add intersection, union, difference, XOR operations for closed polylines.

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

1713QCAD (main)Feature RequestLowAdd attribute value "By Parent" for child layersAssigned
0%
Task Description

Add attribute value “By Parent” for color, line weight, line style for child layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407

1714QCAD (main)Feature RequestLowDimension > Diametric: improve display when label is mo...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408

1721QCAD (main)Feature RequestLowInsert table toolAssigned
0%
2 Task Description

Hi Andrew,

I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)

Many thanks

Clive

1722QCAD (main)Feature RequestLowOption to insert viewport at either of the rectangle co...Assigned
0%
1 Task Description

Hi Andrew,

Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.

Hope that makes sense.

Many thanks

Clive

1723QCAD (main)Feature RequestLowDetecting overlapping line / arc segmentsAssigned
0%
4 Task Description

Add a tool to detect overlapping segments or lines and arcs.
Similar like the “overkill” command in other CAD systems.

1731QCAD (main)Feature RequestLowOption to place text to other sideAssigned
0%
1 Task Description

Hi Andrew,

It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(

Many thanks

C;live

1749QCAD (main)Feature RequestLowAdd support for non-uniform block scalingAssigned
0%
1 Task Description

Same txt as on the forum.
had a copy because i had to log in 3 times to remark my own post.

Blocks are no solution either.

see pdf
[attachment=0]Block test_1.pdf[/attachment]

Antartica is put in a block as segments.
Added a rounded corner as segments and as poly.
scaled X x0.5 Y x1 origin the center of the magenta circl.

The scaled version is all over the place.
Set them to color red, no use they stay black.

The reference of the block is 2000mm to the left because I tried it out far right of my design.
The cyan circle is about 400mm in diameter.

dxf part included
[attachment=1]Block test.dxf[/attachment]

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)

CVH

1755QCAD (main)Feature RequestLowSelecting standard rotation angles by mouse click for M...Assigned
0%
1 Task Description

This would be nice.
It will save a lot mouse - keypad changes for me.

1772QCAD (main)Feature RequestLowGo back on right-click on shaded Tool buttonAssigned
0%
Task Description

Right-click on the tools on the left-hand side of the screen brings you back in the hierarchy.

However, that does not work if you right-click while hovering above a button that that is shaded (inactive).

1788QCAD (main)Feature RequestVery LowNew snap: reference points of a block referencesAssigned
0%
Task Description

I know this was reported and fixed before ...

https://www.qcad.org/bugtracker/index.php?do=details&task_id=843

... but it looks like we have the issue now back with some kind of variation.

If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.

If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.

Edit: New Test drawing:

794QCAD (main)Bug ReportLowApplying Solid grid lines - not workingAssigned
50%
Task Description

Windows
3.0.8
Application preferences > Graphics View > Appearance - Solid grid lines doesn’t change anything?

498QCAD (main)Bug ReportLowissue importing from AutocadAssigned
0%
Task Description

There is an issue importing from Autocad:
lines and quotes (both arrows and text) appear too much big (see attachment).
I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick.
Autocad’s dxf are opened with right line thickness but wrong quotes.
Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.

513TranslationBug ReportLowTranslation errors (German, French, Italian, Spanish, P...Assigned
0%
Task Description

If you spot an error in the translated user interface of QCAD, please add a comment to this task.
Thank you for your help!

Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu.
Vielen Dank für Ihre Hilfe!

Si vous constatez une erreur dans l’interface utilisateur traduite de QCAD, s’il vous plaît ajouter un commentaire à ce rapport.
Merci pour votre aide!

Si usted encuentra un error en la interfaz de usuario traducida de QCAD, por favor, añadir un comentario a este informe.
Gracias por tu ayuda!

Se você encontrar um erro na interface do usuário traduzidos do QCAD, por favor, adicione um comentário a este relatório.
Obrigado por sua ajuda!

523QCAD (main)Bug ReportLowSelection tool button in CAD tool bar shows line tools ...Assigned
0%
Task Description

The selection tool is not accessible:

Click on Selection Tool icon - left panel:

Left panel then shows line tool options.

Click “back” button at top of left panel:

Left panel then shows selection options.

Click an option icon:

Left panel then shows line tool options again.

584QCAD (main)Bug ReportLowLibrary Items können unbrauchbar gemacht werden durch l...Assigned
0%
Task Description

Nach einigen Überraschungen ....

Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....

Fallbeispiel 1:
Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt.
Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat.
Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will.
In der Blocklist ist es natürlich immer noch verfügbar.
In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden.
Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt.
Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.

Fallbeispiel 2:
Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.

Fallbeispiel 3:
Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....

Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?

585QCAD (main)Bug ReportLowCopy & Paste Vorschau Proportionen passen nicht ...Assigned
0%
Task Description

Kopiere ich Bemaßungen/Leader in die Zwischenablage und möchte diese dann wieder in die Zeichnung einfügen passen die Vorschau Proportionen nicht mit dem eingefügten Ergebnis überein. Eigentlich nur ein Schönheitsfehler aber es erschwert die korrekte Positionierung und die benutzung der Optionen wie skalieren, rotieren etc ...

641QCAD (main)Bug ReportLowNo warning is displayed when lengthen tool is used with...Assigned
0%
Task Description

Command ‘Lengthen LE’ will extend most arcs but not all (2 arcs in the attached drawing do not work)! There is no obvious reason for this from the users point of view.

645QCAD (main)Bug ReportLowInch - Layerdata / Linewight still in mm ...Assigned
0%
Task Description

Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....

I like it ;-) ... but maybe I’m the only one :-(

665QCAD (main)Bug ReportLowPossible printing error on Linux fedora 16?Assigned
0%
Task Description

On behalf of et76
Possible printing error using Linux 16 - needs further testing!
Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

Au nom de et76
Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests!
S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

689QCAD (main)Bug ReportLowGrid spacing info not shownAssigned
0%
Task Description

OpenSuSE 12.2: the grid info display is not displayed:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2178&view=unread#unread

700QCAD (main)Bug ReportLowSaved 'hatched' block loses hatching when using isometr...Assigned
0%
Task Description

Hatched block loses hatching when using isometric projection tool:
See -http://www.qcad.org/rsforum/viewtopic.php?f=32&p=7063#p7063

When manipulating a saved hatched block with the isometric tool it loses the hatching unless the block is exploded.

Is this normal behaviour here? or a bug?

705QCAD (main)Bug ReportLowVerwaltung Library Resourcen und Favoriten ....Assigned
0%
Task Description

Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....

Hier meine Gedanken ....

In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.

Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.

Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX ;-) Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.

Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!

OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”:
QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!

Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.

714QCAD (main)Bug ReportLowIsometric view tool bar doesn`t remain ' docked'.Assigned
0%
Task Description

Win 7 - 64
Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.

721QCAD (main)Bug ReportLowVertical dimensions imported as horizontal dimensionsAssigned
0%
Task Description

Vertical dimensions created with 3rd party applications are sometimes imported as horizontal dimensions with length 0. Changing the angle in the property editor fixes the problem.
Problem occurs in QCAD 2.2 and QCAD 3.0.

729QCAD (main)Bug ReportLowPreferences not stored on some installationsAssigned
0%
Task Description

Preferences not stored on some installations

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&view=unread#unread

733QCAD (main)Bug ReportLowQCAD Trial: batch tool dwg2bmp produces no outputAssigned
0%
Task Description

Some users are experiencing problems with dwg2bmp.

See forum at:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2272&view=unread#unread

735QCAD (main)Bug ReportLowAngle dimensioningAssigned
0%
Task Description

See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread

Showing tasks 251 - 300 of 325 Page 6 of 7<<First - 3 - 4 - 5 - 6 - 7 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing