QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  asc
514QCAD (main)Feature RequestLowPunktpestimmung Intersection manual muss immer wieder n...Assigned
0%
Task Description

Beispiel:
Zeichnen einer Linie (Line two points) mit Punktbestimmung.
Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut ;-)

Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht :-(

1827QCAD (main)Feature RequestLowProperty Editor: Accept advanced scale expressions for ...Assigned
0%
Task Description

Hi,

Identical scale expression used in Print Preview like 5:1, 5/1, 5”=1”, 5 are working flawless like expected.
Same expression used in a Viewport scale leads to different outcomes.

The Property Editor used to fix that in Paper_Space does also not accept those standard expressions.

2229QCAD (main)Feature RequestLowProperty Editor, option format property values as decim...Assigned
0%
Task Description

Angle Display is decimal although the decimal display is disabled in Application Preferences.

Format should be 17° 31’ 52” instead of 17.531111.

1678QCAD (main)SuggestionLowProperty Editor dialogAssigned
0%
Task Description

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239

729QCAD (main)Bug ReportLowPreferences not stored on some installationsAssigned
0%
Task Description

Preferences not stored on some installations

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&view=unread#unread

1877QCAD/CAMFeature RequestLowPost Processor TutorialAssigned
0%
Task Description

Hallo Andrew,

I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.

Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?

665QCAD (main)Bug ReportLowPossible printing error on Linux fedora 16?Assigned
0%
Task Description

On behalf of et76
Possible printing error using Linux 16 - needs further testing!
Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

Au nom de et76
Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests!
S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

1890QCAD (main)Feature RequestLowPossibility to address an QCAD extern font folderAssigned
0%
Task Description

Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD. :-)

The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.

2457QCAD (main)Bug ReportLowPolyline start / end widths not saved for first segmentAssigned
0%
Task Description
  1. Draw a polyline with a single segment
  2. Set the start and end width of the first vertice / segment (index 0)
  3. Save
  4. Reload
1823dwg2pdfFeature RequestLowplotting error to pdf a Dwg where the view port is not ...Assigned
0%
Task Description

When trying to plot a dwg or a dxf to pdf where the viewport is orientated to a different angle than north up
the data in the view port is plotted north up.
see attached DWG and pdf for clarification.

1046QCAD (main)Feature RequestLowPlease add script bindings for Qt 4.8.6 and 5.2.1Assigned
0%
Task Description

These are the versions Ubuntu 14.04 comes with, and since it’s an LTS version, it will linger around a while.

(Despite the fact that the Qt4 packages are versioned 4.8.5, qmake –version says 4.8.6, so it doesn’t find the 4.8.5 bindings.)

Thanks,

2034QCAD (main)Feature RequestLowPaint Properties to include modifying linetype scales w...Assigned
0%
Task Description

Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result.
QCAD Pro 3.24 Windows10.

1111QCAD (main)Feature RequestLowOption to swap right/middle mouse buttonAssigned
0%
Task Description

Most of the other slightly non-standard CAD/eCAD tools I work with (e.g. Diptrace, PTC Creo Elements) use the right mouse button to drag.
So when changing between these applications, it’s slightly confusing/annoying that I need the middle mouse button to drag in QCad.
Even worse, the middle mouse button on most mice is the scroll wheel which is not really comfortable to hold while dragging.

So I’d propose an option to switch the function of the middle and right mouse button to allow users to choose the preferable option.

868QCAD (main)Feature RequestLowOption to save to dwt - drawing template.Assigned
0%
Task Description

An option to save to dwt (drawing template) would be so very useful.
Please see related topic:

http://www.qcad.org/rsforum/viewtopic.php?f=32&p=8237#p8237

1731QCAD (main)Feature RequestLowOption to place text to other sideAssigned
0%
Task Description

Hi Andrew,

It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(

Many thanks

C;live

1722QCAD (main)Feature RequestLowOption to insert viewport at either of the rectangle co...Assigned
0%
Task Description

Hi Andrew,

Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.

Hope that makes sense.

Many thanks

Clive

1632QCAD (main)Feature RequestLowOption to add bespoke dimension precision + tolerance s...Assigned
0%
Task Description

Hi Andrew,

1. I cannot find a way of selecting individual dimensions and changing the precision lets say from 0.00 to 0.000 for these particular dimensions only without affecting all the rest of the dimensions in the drawing - could an option be added for doing this in the property editor or not?

2. Would it be possible to add an option in the drawing preferences so that automatically a symbol is added at the correct placement fo all dimensions, in this case a tolerance plus/minus symbol?

Many thanks

Clive

675QCAD (main)Feature RequestLowOption for fixed Text and Dimension heights ...Assigned
0%
Task Description

I think it would be nice to have the possibility to decide a fixed Text and Dimension (inclusive Arrows) height what is not affected by the Print scale. That means: If I have a given height of 3,5mm it will always be printed with 3,5mm - no matter what the scale for the printing is.
Yes, I see also the problem that I could run in space problems after I twitch to the Print preview - but that will also happen when I change the Text hight in the preferences for a 5:1 printing.
Maybe this Feature Request doesn’t looks important if you are usually working with Metric Units but if you have to handle Imperial Units then it is a pain in the back to make always the calculation to get the same heights.
Try it by your self; 3,5mm = 0.137795” = 1”:1” Now I like to print it in 1”:256” ops - to small - ok 1”:64” ... no, to big, maybe 1”:128” .......and QCad can’t remember the previously numbers. ;-)

2056QCAD (main)Feature RequestLowOption Duplicate layer (yy) inclusive all sub-layers.Assigned
0%
Task Description

If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done.
Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.

Current lack:
Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.

With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ... :-(

1930QCAD (main)Feature RequestLowOption disable "Auto Zoom on load" for saved "Layout Vi...Assigned
0%
Task Description

Hi,

my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.

But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.

Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?

631QCAD (main)Feature RequestLowOption "Scale" für das öffnen von Templates ...Assigned
0%
Task Description

Wenn ich eine Zeichnung plane überlege ich mir natürlich im Vorfeld welche Blattgröße und welchen Maßstab ich verwenden möchte.

Wenn ich Templates (z.B. Zeichnungsblatt A4) für die Blattgröße öffnen könnte und dabei direkt einen Skalierungsfaktor (z.B. 10) vorgeben könnte hätte ich ohne Umwege gleich alles was man braucht. In diesem Fall ein A4 Blatt im Maßstab 1:10.

Im Grunde genommen das selbe was ich bereits mit Library Items machen kann ... ;-)

2387QCAD (main)Feature RequestLowOpen Drawings on Layout Block by DefaultAssigned
0%
Task Description

As the layout block contains the drawing sheet, the number, the viewports, it’s the presentable part of the drawing.

Maybe QCAD could be able to save on the dxf the “last state” of the drawing. If I saved on the Model and closed, it would open on Model... and if my last save was on the Layout”n”, it would open on Layout “n”.

At least on my work area, when opening a finished drawing, it’s the ideal for it to be opened in a Layout (if it was the active block while saving).

2550QCAD (main)Bug ReportLowOnly a partial hatch appears in a closed shapeAssigned
0%
Task Description

I’m seeing only a partial hatch in the shape. See here for details.

1130QCAD (main)Feature RequestLowOffset Polyline from both sides at onceAssigned
0%
Task Description

It would be great to have a tick box to be able to offset a polyline from both sides/edges at once.

Maybe a similar feature could be added to the line -parallel tools?

1836QCAD (main)Feature RequestLowOffset for paste along entityAssigned
0%
Task Description

add a new parameter “offset” in the dialog “Paste along entity”

see https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22307#p22307

2068QCAD Community EditionBug ReportVery LowNon-english text in upper/lower index becomes UTF codeAssigned
0%
Task Description

How to reproduce.

1. Create a text field with some non-english words in the upper index. (see attached pic1.png)
2. Save the project and close QCAD.
3. Run QCAD and open same project.
4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)

Tried different fonts - doesn’t help.

Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
CentOS Linux release 7.7.1908 (Core)

641QCAD (main)Bug ReportLowNo warning is displayed when lengthen tool is used with...Assigned
0%
Task Description

Command ‘Lengthen LE’ will extend most arcs but not all (2 arcs in the attached drawing do not work)! There is no obvious reason for this from the users point of view.

964QCAD (main)Feature RequestLowNew tool request - 'Break Out Arc' from CircleAssigned
0%
Task Description

It would be useful to be able to pick a Start and End point of an Arc within a Circle to then break this out. So in principle another break out tool.

Please see topic:http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8826#p8826

2535QCAD (main)Feature RequestLowNew tool idea: Scale polyline objects separately, each ...Assigned
0%
Task Description

In my current QCAD file I’m working on, I have a circular hub with a hole in it which I am also trying to place an alternating sequence of rectangular spokes of a certain relative size around.

I had 4 spokes that I had copied and rotated 45 degrees to create 8 spokes in total around the circle. I tried scaling the the non-cardinal spokes relative to the center of the circular ring, but that causes them to also move towards the center of the ring as they shrink, thereby putting them out of place as they scale.

I therefore had to activate the scale tool once per each object and set an origin (focus) point around the area where each spoke is “attached” to the ring in order to stop each from shifting inward to the circle as it scales.

It occurred to me though that there could be a simple tool or option to do this without that.

Each of my rectangles are polyline objects and thus are coherent continuous objects.

A new scaling tool could be designed such that it is based on simply clicking on each scaling origin on each object (using snapping tools if needed) and then clicking a check button (or enter) when done and then causing the scaling GUI to appear so the user can specify the desired scaling. Each scaling would then be applied to where the polylines were clicked instead of to all the objects as one.

This would be a much faster way to rescale a bunch of objects around individually varying relative scaling origins!

1363QCAD (main)Feature RequestLowNew Tool - make lines horizontal or verticalAssigned
0%
Task Description

New Tool Request:

To have a tool to make any given line which is ‘not’ orthogonal already into an orthogonal line.

For example if I had a line at 30 degrees by using the tool I could change the line to be either horizontal or vertical.

1788QCAD (main)Feature RequestVery LowNew snap: reference points of a block referencesAssigned
0%
Task Description

I know this was reported and fixed before ...

https://www.qcad.org/bugtracker/index.php?do=details&task_id=843

... but it looks like we have the issue now back with some kind of variation.

If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.

If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.

Edit: New Test drawing:

813QCAD (main)Feature RequestLowNew Snap tool: Isometric coordinates ...Assigned
0%
Task Description

It would be nice to have an additional Coordinate tool for isometric constructions.

If I’m working on an isometric drawing I have to design my things with x, y, z coordinates.
Y is, of course not a problem but for x and z I have most off the time to work with construction lines for move, copy, locate etc.
With an isometric coordinate snap tool what will follow the 30° angles for x and z we could save a lot of construction lines ;-)

1505QCAD (main)Feature RequestLowNew feature - use info tools with scaleAssigned
0%
Task Description

When using the info tools, like the point to point measure it would be useful to be able to select a scale as well.

For example, when I scale a drawing say to 1:20, when working on the scaled drawing I can measure accurately with the measure tool in 1:20 also, without having to keep refering to the 1:1 drawing.

Regards

Clive

1621QCAD (main)Feature RequestLowNew Drawings in Draft ModeAssigned
0%
Task Description

See: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5001

792QCAD (main)Feature RequestLowNew 'Match' properties toolAssigned
0%
Task Description

To add a new ‘Match’ properties tool.

For example, I have a large drawing with lots and lots of entities on various layers and I want to select some entities (say 500 or more) which are all on different layers and change all these selected entities to match the properties of one other particular entity - but, but I want the ‘Matched’ entities to remain on their own layers.

OK, of course I can use the property editor for this and this is fine in most instances but I would first need to determine the the layer data for the properties of the entity I would like to match to (Color, Line weight and Line type) in the first place and then I need to remember these attributes in order to change things in the property editor in order to change all of my selection to match!

As I say mostly the above procedure would be fine to use but for convenience it would be great to have a new tool to do all this for me and cut out a few steps in the process.

A new ‘Match’ properties tool procedure could be something like this:

1. Select Match properties tool.

2. Select all entities to be matched.

3. Select entity to match to.

4. Tick or leave un-ticked - move to same layer.

5. Complete process.

* Actually, while writing this I`ve just thought of another useful addition which could be added to the Info tool set, ‘Entity’ properties info!
Example - click on Info > Entity Properties and click on the entity in question and then the properties are displayed without going to the layer data for this!
Just an idea ;)

293QCAD (main)Feature RequestLowmulti-select for blocksAssigned
0%
Task Description

It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.

1916QCAD (main)Bug ReportLowMoving an object in an angled viewport with mouse does ...Assigned
0%
Task Description

To reproduce

1. Select a new view-port in model-space
2. Select the appropriate paper-space
3. When the paper space opens change the angle of the viewport to 90 degrees
4. Place view-port in paper space
5. Select the view-port in paper-space by clicking it
6. Try to move the object itself in the view-port (by clicking the “top” dot) to the right by moving the mouse to the right while holding the left mouse-button.

Actual

The object in the viewport moves down vertically NOT to the right

Expected

The object moves to the right

(It seems mouse movement does not compensate for the rotated angle of the viewport)

Workaround

None, except compensate for the angle in your head and moving the mouse the “wrong” way when correcting the placement of objects in the view-port

2115QCAD (main)SuggestionLowMove toolbars with negative positions to 0 positions Assigned
100%
Task Description

As it can be seen in the attached image, QCAD toolbars may dock to a position slightly outside the visible area of the screen. After having docked there, I have not been able to move them any more. Their current position is just in the middle of the screen.

The position of the toolbars remains the same after the deinstallation of QCAD, shutting down, restarting the computer and reinstalling QCAD. I kindly ask for help.

Kind regards
Reinhard

833QCAD (main)Feature RequestLowMove number of copies into Options toolbarAssigned
0%
Task Description

The Number of Copies (Delete Original, Keep Original, Multiple Copies) and whether to use the current layers attributes should be found in the Options toolbar of the active tool.

This way the option would be set before or during the operation (preview?)the popup window afterwards would be obsolete.

822QCAD (main)Feature RequestLowmove Freehand Line to Polyline ToolsAssigned
0%
Task Description

In order to be more easily editable after creation Freehand Line should produce a Polyline and should be moved away from Line Tools to Polyline Tools

2048QCAD (main)Bug ReportVery LowMove / Copy to current layer fails when reference point...Assigned
0%
Task Description

QCAD 3.24.2 / macOS x86_64 10.14.6

Starting with empty doc:
1. Draw any object (e.g. a rectangle) on layer 0.
2. Create new layer (”1”) with color, say yellow.
3. Select new layer
4. Select new object
5. Modify → Move / Copy
6. Click reference point
7. Click target point same as reference point
8. In “Move / Copy Options” dialog, select “Delete Original” and check “Use current layer and attributes.” Click OK.

The moved object stays on the layer it was previously on. Using “Move / Copy” as a quick way to move a selection between layers is not useful even though it appears to be the recommended way in a Google search.

Note: if “Keep Original” is selected instead, the copied object is placed on the current layer and the original object remains on its layer, as expected.

Note: if the target point is different from the reference point, the moved object is placed on the current layer as expected.

There are other workarounds too, cut / paste with “To current layer” checked seems to work, as does chaging the layer in the Properties Editor.

2537QCAD (main)Feature RequestLowMore variants for converting element types could be use...Assigned
0%
Task Description

I don’t actually have any use for this idea currently, but am just posting it here to document it for consideration.

Basically, it occurred to me at least a few more useful conversions between shapes besides the existing ones could be useful.

For example:

  • Converting lines into axially aligned rectangles of a specified “radius” or “diameter” (with an option to delete or keep the original line geometry).
  • An option for the above (lines –> rectangles) that causes the intersections between the resulting rectangles to be automatically removed, like a kind of “automatic/magic wall creation tool” based on laying down lines instead of rectangles and then converting via this tool.
  • Converting circles/ellipses and rectangles back and forth between each other via their bounding volumes. It seems reasonably likely that people will sometimes want to convert circular design elements into rectangular ones and vice versa (e.g. deciding a rectangular column makes more sense than a cylindrical one and vice versa).
  • Converting any arbitrary selection into a corresponding bounding circle (not rectangle, which already exists) of sufficient size to enclose all points in the selection.

Basically, QCAD already has tools for converting shapes with operations that are a natural fit for the existing geometry, but has less tools for converting to entirely different geometry, but such uses could actually still be very useful potentially!

It seems likely to be common enough as a use case to merit inclusion, rather than just using scripting.

I don’t have any pressing need for these and I know that I could script them to create them if I really wanted to.

These are relatively minor ideas. I’m just putting this out here as more ideas for making this already wonderful software even better. :)

2233QCAD/CAMFeature RequestLowMore selection options to select sheets for nestingAssigned
0%
Task Description

I’m often in the situation that I have to select for nesting 50+ sheets. Currently is only a Shift + left mouse click selection possible. It would be nice if QCAD/CAM could get for the nesting / sheet selection additional a mouse rectangle area selection.

1676QCAD (main)Feature RequestLowModify > Explode: explode lines / arcs with line patter...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4333

2169QCAD (main)Bug ReportLowMissing G-Code G00 X0 Y0 when placing hole at x0 y0Assigned
0%
Task Description

When placing a hole at x0 y0 there is no G00 x0 y0 in the exported G-Code.
So the first cut was made at the current position of the tool, not at x0 y0!

2396QCAD (main)Bug ReportLowMissing Dim/Label Format information from an extern wri...Assigned
0%
Task Description

Please refer to forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9556

The attached example file is written with a third party CAD program in R15.
Opened in QCAD CE all Dim/Label information are available.
If I load this drawing in QCAD Pro the Dim/Label information are lost.

If I load and save the example drawing with CE the newly written dxf is readable in Pro without any issue.

836QCAD (main)Feature RequestLowMerge different Offset tools into just twoAssigned
0%
Task Description

Merge Parallel Line(with distance), Concentric Arc(with distance), Concentric Circle(with distance) and Offset(Polyline) into one generic Offset with distance tool that if possible also works for ellipses and splines.

Do the same for the “through point” tools so that there also is just one Offset through point tool.

The Offset tools could be located with the Modification tools.

1982QCAD (main)Feature RequestLowmeasure DIN 1356Assigned
0%
Task Description

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

604QCAD (main)Feature RequestLowMeasure and record X,Y coordinates tool - add to info ...Assigned
0%
Task Description

Feature request
See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015

Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.

1371QCAD (main)Feature RequestLowMatrix - Modify, missing Flip Horizonatal and Vertical ...Assigned
0%
Task Description

Matrix - Modify, add Flip Horizonatal and Vertical tools

Showing tasks 51 - 100 of 519 Page 2 of 11 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing