QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
1172QCAD (main)Feature RequestLowPrint Preview - Add 'Place Paper Option' toolAssigned
0%
1 Task Description

Often in print preview I need to move the paper around and position it with the ‘Move Paper Position’ tool, which is useful, but what would be an additional extra useful option would be a ‘Place Paper Here’ tool.

Then I could simply use this tool first and then use the ‘Move Paper Position’ tool afterwards to fine tune things!

If you look at the attached image you will see that in this students file they have got their drawing spread out all over the place:(

519QCAD (main)Feature RequestLowPress tab to access first control in options tool barAssigned
0%
1 Task Description

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867

Apparently this was possible in QCAD 2 due to the default behavior of Qt.

1577QCAD (main)Feature RequestLowPostfix for DIM / Remember last DIM Label ...Assigned
0%
1 Task Description

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

2397QCAD (main)Bug ReportLowPost processor "LaserGBRL (offset) [mm] fails at tabsAssigned
0%
1 Task Description

Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.

Forum topic:
https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495

922QCAD (main)Feature RequestLowPossibility to control the order in the Property editor...Assigned
0%
1 Task Description

It would be nice and helpful if we had the possibility to control the order of Attributes - shown in the property editor.
I found a solution for myself with using numbers in the Attribute definition tag - but that isn’t really a nice solution.
If I could hide my numbering ... everything would be fine for me .... ;-)

2543QCAD (main)Bug ReportLowPolygonal Area Tool (IR) creates shapes persistently, c...Assigned
0%
1 Task Description

Upon activating the Polygonal Area Tool either by clicking on the toolbar or by the IR keyboard shortcut the tool will persistently draw a polygon without clicking anything. This happens with the mouse and the trackpad on the MacBook Pro. This was happening in 3.29.3, and then after I upgraded to 3.29.4. The MacOS version is 14.1 Sonoma.

2302QCAD (main)Bug ReportVery Lowpolygon.getSelfIntersectionPoints(tol) returns 3th inva...Assigned
0%
1 Task Description

Windows 7 pro 32 bit msi-Installer
Version: 3.26.4.5 (3.26.4.5)
Internet: QCAD.org
Build Date: Jul 20 2021
Revision: e596276
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Andrew,

In the attached dxf:
Besides that it is clear that duplicate vectors are not filtered ...
Where a segment is crossing in another node a non valid node is returned as self-intersection point.
Seems to be unrelated to CW/CCW or tolerance.

Where 2 nodes coexists 4 duplicate vectors are returned.

Regards,
CVH

612QCAD (main)Feature RequestLowPlot math functionsAssigned
0%
1 Task Description

Input:

  1. X axis min/max or choose line (?) or center (for polar functions)
  2. function: y = f(x) / polar function: r = f(a)

Output:

  1. function plot
2390QCAD (main)Feature RequestLowPlease add U.S. Survey Feet to the Unit / convert listAssigned
0%
1 Task Description

Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good. ;-)

See also:

https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245

859QCAD (main)Feature RequestLowPersistent selection button added to tool set.Assigned
0%
1 Task Description

It would be useful to have a persistent selection button added to the ‘selection’ tool set.

This would allow the user to set persistent selection as and when needed for the current drawing one is working on, rather than going the long route through the ‘Application’ preferences dialog.

866QCAD (main)Feature RequestLowPaste block reference: add third option to rename paste...Assigned
0%
1 Task Description

Scenario:

Drawing 1: Blockname X is part of a selection, I copy this selection into the clipboard to use it in an other drawing.

Switch to Drawing 2, this drawing has also a Blockname X but with a different content.

Use the clipboard paste function - the clipboard content will be modified (only the Block) by the drawing 2 block content.

No warning pops up - it just happens!

1928QCAD (main)Feature RequestLowOptionnally 'Auto clean up' after generation of NaN / N...Assigned
0%
1 Task Description

Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props.
Some explicitly don’t and test their actions with isNull().

As these serve a purpose in some processes, trails of them can be part of the results.
For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line.
In a few cases its a desirable feature eg. controlpoint spline.
(Allthough there are no Null props involved with equal successively controlpoints)

Many problem post on the forum are related to Null - Zero and so on.

In some cases it can’t be undone by re-editing the drawing.
https://qcad.org/bugtracker/index.php?do=details&task_id=1925

If it can’t be undone by Undo/Redo it is a bug.
https://qcad.org/bugtracker/index.php?do=details&task_id=1757

In some cases there is a difference noticed after file save-close-open.

1464QCAD (main)Feature RequestLowOption button to access finer grid to snapAssigned
0%
1 Task Description

Hi,

I use eagle cad for pcb designs and I like its ability to snap to finer snap to grid when pressing option button (ALT in windows).
I am fine with auto grid setting, however, it would be good to also have a way to access finer grid when pressing down option button.

For example, when zoomed out, grid is 100mm apart.
When pressing down on the option button (ALT in windows), grid switches to finer 10mm.
This will save me time, zooming in to access finer grid to snap to.

2016QCAD (main)Bug ReportLowOffsetting multi selection of polylines halts prematureAssigned
0%
1 Task Description

See:
https://qcad.org/rsforum/viewtopic.php?&t=6827&p=25992#p25992

Offsetting 32 polys from ellipses fails.
Offsetting 16 polys can be completed with 2 selections for outer and 2 for inner.

For some reason the offset function halts premature.

Regards,
CVH

2098QCAD (main)Bug ReportVery LowOffset will pick up hidden blocks while using it in a l...Assigned
0%
1 Task Description

When I’m drawing inside a layout block the offset tool picks up lines from blocks that are hidden.
It is not happening with all the block.

775QCAD (main)Feature RequestLowNote book tool for QCADAssigned
0%
1 Task Description

It would be really cool to have a Note book tool for QCAD!

For example I am often working on a draft and at the same time scribbling notes down on a separate piece of paper relating to the drawing I am working on, could be anything e.g. add a block,add a dimension etc. etc... all sorts of things to remind myself about - all related to a particular drawing.

Of course I could use any number of other programs for this but a simple dedicated tool inside QCAD (could be called the ‘QCAD scribbler ;)) would be much better, especially one that can save the notes to a particular file, then when I open up my drawing again - my notes are there too!

1926QCAD (main)Feature RequestLowNo negative coordinate values ? (DO command)Assigned
0%
1 Task Description

Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !

Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command.
There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !

GW.G

1362QCAD (main)Feature RequestLownew layer tool: Toggle visibility allAssigned
0%
1 Task Description

Hi,

I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go.
Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.

The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.

And I’m confident - there are many more useful scenarios for a tool like this one ... ;-)

pics: “Toggle visibility all” with one click:

1440QCAD (main)Feature RequestLowNew Drawing in Simple APIAssigned
0%
1 Task Description

Could it be possible to add a simple function to add a new empty drawing (like File > New) to Simple.js ? Thank you. (PS, this simple.js API is awesome, btw :D)

( I already have my own to simplify my scripts, but it does not seem to work correctly if I set action.setRequiresDocument(false); in the init functions
See more at http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4203#p15203 )

2087QCAD (main)Feature RequestLowMore options for "Paste along Entity" [PE]Assigned
0%
1 Task Description

“Paste” has already the options: To current layer, Overwrite layers, Overwrite blocks.

Would be a nice time saver to have the same options for “Paste along Entity” too.

512QCAD (main)Feature RequestLowModify stretch and Restrict orthoAssigned
0%
1 Task Description

The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.

So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?

2145QCAD (main)Bug ReportLowModify > Trim Both: closed polyline as either entity br...Assigned
0%
1 Task Description

QCAD Professional

Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Use TM by mistake to trim a line to a closed shape.
Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7780
File included in the topic.
Y1 Original
Y2 Faulty use of TM
Y3 After ‘Undo’

Husky only ‘could agree on a not proper working undo
The conditional clause of this sentence is ‘the odd choice’.
Blaming this on incompetence.
Insight is the best way to get better ...
... but the rest is more an odd choice of tools for this kind of task ...

Again, the MISTAKE was by accident, not intended, in a flick of the wrist ...
I didn’t change the trimming method, I simply forgot to ... only once.

The ‘undo’ of my incompetent MISTAKE didn’t returned to how the situation was before I erroneous trimmed with TM.
I was simply undoing my erroneous action.

Documented it in 4 quadrants.
For this, 4 times on purpose, and not as a consistent ‘odd choice’.

Regards,
CVH

1430QCAD (main)Feature RequestLowModify > Round: one-click filletAssigned
0%
1 Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4256

2316QCAD (main)Feature RequestLowModify > Detect Duplicates: implement for infinite line...Assigned
0%
1 Task Description

Headline should already explain the issue ... ;-)

2176QCAD (main)Bug ReportVery LowModify > Break out Manual: relevance of order of click ...Assigned
0%
1 Task Description

QCAD Professional
Windows 7; Win installer 32 bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988
File included.
I have no intention to make 48 separate reports.

CVH

2347QCAD (main)Bug ReportLowModify / Clip to rectangle issueAssigned
0%
1 Task Description

The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.

1262QCAD (main)Feature RequestLowMissing some kind of "QCAD is still working" indicator.Assigned
0%
1 Task Description

If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...

It would be nice to have some kind of visual info that QCAD is working.

2341QCAD (main)Feature RequestLowmanage image referencesAssigned
0%
1 Task Description

QCAD. ver. 3.27.1.0 (3.27.1)
Qt version: 5.13.2
Architecture: x86_64
OS Windows 11

It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again.
I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)

2421QCAD (main)Feature RequestLowMake the preview of Shorten (LE) more visibleAssigned
0%
1 Task Description

Andrew,

When we use Lengthen/Shorten (LE) with a positive amount the result is clearly visible when indicating a side of an entity.
With a negative amount there is seemingly no preview.
It is generated and shown but one can not distinguish it especially with solid lines.

Adding an orthogonal auxiliary preview shape some N pixels long would do the trick. ;-)

Regards,
CVH

2478QCAD (main)Feature RequestLowMake RMathLineEdit unit awareAssigned
0%
1 Task Description

Andrew,

Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10094

When entering 1’ 1’‘ in an input field.
- As the size of the rectangle in the topic
- As the length property of a line selected in the drawing
- ....

Returns 13 in a drawing in mm.
And also in a drawing in inch what turns out to be correct.
But also in a drawing in foot.

Similar, entering 1’ with a drawing in kilometers it returns 12 units = 12 kilometers.

Regards,
CVH

2161QCAD (main)Feature RequestLowMake Polyline from Selection (OC) configurable for simp...Assigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Not related to OS, nor version.

The method Polyline from Segments (OC) can be configured for tolerance and simplification in the Options Toolbar.
The method Polyline from Selection (OG) has no UI or none showing.

OG retrieves a tolerance from QCAD.ini, what is initially not set:

    var tolerance = RSettings.getDoubleValue("PolylineFromSelection/Tolerance", 0.001);

The tolerance will be default = 0.001 similar as the default in AppPrefs.
The tolerance setting is included in QCAD.ini after changing the AppPrefs entry.

OG calls PolylineFromSelection.autoJoinSegments with this tolerance:

    var counter = PolylineFromSelection.autoJoinSegments(di, tolerance, this);

PolylineFromSelection.autoJoinSegments calls PolylineFromSegments.createPolylineShape
with simplification hard coded to true. (last parameter)

    // create polyline from line, arc, spline or open polyline entity:
    var polyline = PolylineFromSegments.createPolylineShape(
                    entity, doc, vTolerance, op, undefined,
                    traversed, callBacks, undefined, true);

I would like to see the simplification optional and default = true.

Regards,
CVH

849QCAD (main)Feature RequestLowMake maximum visible reference points of selection conf...Assigned
0%
1 Task Description

Provide configuration option to raise / lower maximum reference points that are shown for selected entities (currently fixed to 1000).

Original report:

Imported a spline-dxf from adobe illustrator. Converted the spline to polyline with explode command. Then no anchor points / vertex points / vertices were showing anymore. Simplified the polyline so that it had less than 1000 points. Vertices became visible.

I think some freeform objects need actually more than 1000 vertices. Also them need to be edited. Please increase the amount of vertices showing to biginteger

regards

Benjamin

1312QCAD (main)Feature RequestLowMake dimension label decimal separator configurableAssigned
0%
1 Task Description

Make dimension label decimal separator configurable (DIMDSEP).

1462QCAD (main)Bug ReportLowMac Trackpad zoom gesture not working as expectedAssigned
0%
1 Task Description

Hi,

I am using mac version and I have annoying issue with trackpad.
I use qcad primary with my trackpad and under application preferences (Graphics View/Navigation), my setting is as follows.
Mouse wheel / two finger swipe: Scroll (Trackpad...
Enable pan gesture : unticked (found that enabling this often goes into pan mode when I am just moving my pointer around)
Limit zoom and scroll to prevent overflows : ticked (hoping that this would prevent weird zooming issue. I will describe what I am experiencing later this page)
Reverse mouse wheel direction for zoom :unticked
Mouse wheel zoom factor: 1.02

Things work as expected:

  • panning with two finger swipe
  • and the rest

Issue I am experiencing:

Often, when I am zooming in and out with two finger gestures, the view suddenly sets to some weird state and my drawing goes off the ruler.
The mouse point remains where it is.

Workaround:
Reset viewpoint with autozoom and navigate around.

Expected zoom behaviour:
I expect viewpoint to zoom in / out at where my mouse pointer is or at least the centre of current view point.

764QCAD (main)Feature RequestLowLinks to Data sheet, Part List ...Assigned
0%
1 Task Description

Most of our drawings have a Data sheet, parts List, cutting list, description etc etc on a pdf, world or excel file.

It would be nice to have a link possibility directly in QCAD to those files what will be saved with the drawing.
Like the bitmap function without displaying the files in the drawing ...

1837QCAD (main)Feature RequestLowLine bisector toolAssigned
0%
1 Task Description

Hi,

we have already this nice tool “Angle bisector”.

I would really appreciate if we could get the same function for parallel lines to place a line exactly in the center of both lines.

Thanks.

2498QCAD (main)Bug ReportLowLight/dark mode UI colours depend on OS theme when QCAD...Assigned
0%
1 Task Description

On macOS 14.1 and QCAD 3.28.2, the state of the OS (light or dark theme) affects some of the QCAD colour palette for the life of the session. So far I’ve noticed the problem with the keyboard shortcuts in tooltips and text in the command line output, but there may be other instances of the problem.

To reproduce:

1. Set the OS to light mode.

2. Start QCAD. Note the keyboard shortcuts in the tooltips are optimised for a light palette.

3. With QCAD still running, switch the OS to dark mode.

4. Note that while most of the QCAD interface switches to a dark mode palette, the keyboard shortcuts in the tooltips do not.

A similar behaviour is observed when starting from dark mode and switching to light mode.

I hope that makes sense. See attached screenshots for examples.

584QCAD (main)Bug ReportLowLibrary Items können unbrauchbar gemacht werden durch l...Assigned
0%
1 Task Description

Nach einigen Überraschungen ....

Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....

Fallbeispiel 1:
Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt.
Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat.
Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will.
In der Blocklist ist es natürlich immer noch verfügbar.
In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden.
Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt.
Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.

Fallbeispiel 2:
Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.

Fallbeispiel 3:
Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....

Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?

1263QCAD (main)Feature RequestLowLibrary Browser: Configurable background color for icon...Assigned
0%
1 Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3709

1673QCAD (main)Feature RequestLowLayouts and Viewports: support polygonal viewportsAssigned
0%
1 Task Description

Add support for polygonal viewports

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

2452QCAD (main)Feature RequestVery LowKeyboard Shortcut for Undo Last Point While Drawing Spl...Assigned
0%
1 Task Description

Instead of having to click on the toolbar, it would be useful to have a keyboard shortcut for undoing the last fit point (or control point) while drawing splines. Preferably it would also be nice to allow the user the ability to set what the keyboard shortcut is for this function.

2146QCAD (main)SuggestionVery LowKeep 'Invisible' objects invisible while savingAssigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Related topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7882
Explanation found in REntity.cpp
Listed as a Public Member Functions inherited from RObject

Regards,
CVH

2415QCAD (main)Bug ReportVery LowIssues with OffsetBothSidesAssigned
0%
1 Task Description

Andrew,

I can’t find any documentation concerning OffsetBothSides under Misc .. Modify.
It is not listed in the QCAD features nor in the changelog.

There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.

The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline.
It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.

There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing.
The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.

I only successfully created a dual offset for open Splines, open or logically open Polylines.
All other attempts result in a single offset at the indicated side.

There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected.
Only tested it on a Win7 platform.
I don’t suspect that version 3.27.8 includes a fix for that ... ;-)

Regards,
CVH

1302QCAD (main)Feature RequestLowIsometric projection on the current layerAssigned
0%
1 Task Description

It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.

772QCAD (main)Bug ReportLowIsometric grid: toggle buttons not updatedAssigned
0%
1 Task Description

- Switch isometric grid off
- Switch isometric grid on using drawing preferences
- Tool buttons don’t reflect correct status

2293QCAD (main)Feature RequestLowinsert attributes into a point elementAssigned
0%
1 Task Description

Would it be possible to extend the tool for importing points with a label so that when importing points into the drawing (as it is now), the attributes of the point are taken from the csv file and written to the point’s own properties? See attachment. This would extend the functionality of the tool and I assume that it would also lay the foundation for the possible re-export of such points from the drawing to a csv file, including all the details.

1287QCAD (main)Feature RequestLowInformation tool shows absolute units in print previewAssigned
0%
1 Task Description

With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units.
So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.

See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

1051QCAD (main)Feature RequestLowInfo tool, polygonal area, possibility for a postfix la...Assigned
0%
1 Task Description

... would be nice.

If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².

I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ... ;-)

703QCAD (main)Feature RequestLowInfo function -> contour for Hatch not closed ...Assigned
0%
1 Task Description

Task: If I like to make a hatch and the contour isn’t closed I get a Grey circle Info where the contour isn’t closed. Nice!

But ..... I have this Info only for ONE not proper connection and only for the moment when the mouse pointer is over the Hatch Tool Symbol.

If I have to zoom into the Problem - I will lose the Info where the problem is :-(

To get the “Problem Info” back I have to select it again - but for that I have to zoom out ............... ;-)

It would be nice to have this “Problem Info” longer in the drawing - maybe until I solved all problems.

And it would be nice to have ALL Infos for not connected lines at the same time. It is not really helpful to repeat this function 20times if I have 20 connection problems ... ;)

2505QCAD (main)Feature RequestVery LowInfo > Polygonal Area > Use dimension decimal format fo...Assigned
0%
1 Task Description

Andrew,
On behalf of user Kmeelo

Polygonal Area adds measurements text with 12 decimal digits and then as short as possible.

Current formatting path see: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10450&p=42833#p42805

Related forum feature request: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10458

I also see a misconception of the term ‘precision’.
Numbers precision is the amount of significant digits disregarding the position of the decimal point.
12 decimal digits is about the largest precision for numbers with 5 integer digits.

Regards,
CVH

Showing tasks 151 - 200 of 519 Page 4 of 11<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing