QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
1023QCAD (main)Feature RequestLowArrange points on a plan according to variation of dist...Assigned
0%
2 Task Description

Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances

1337QCAD (main)Feature RequestLowAlternate units for dimensionsAssigned
0%
2 Task Description

Add support for alternate units for dimension style, for example to display units in mm and in.

1567QCAD (main)Feature RequestLowAdd support for separate windowAssigned
0%
2 Task Description

Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already.
That would help a lot when working on multiple files and copying blocks between.

2299QCAD (main)Feature RequestLowAdd support for multi line attributesAssigned
0%
2 Task Description

Multiline attributes can contain linefeeds and formatting like MTEXT.

1159QCAD (main)Feature RequestLowAdd preference for button option instead of drop down m...Assigned
0%
2 Task Description

For some tools like the Horizontal or vertical line, it would be good to have button options (similar to infinite and ray line buttons) instead of the drop down menus.

695QCAD (main)Feature RequestLowAdd more dimension arrow styles (e.g. dots)Assigned
0%
2 Task Description

Add more dimension arrow styles (e.g. dots).

See forum thread:
http://qcad.org/rsforum/viewtopic.php?f=31&t=2185

2164QCAD/CAMFeature RequestLowAdd ability to pan the 3D view with a modifier key and ...Assigned
0%
2 Task Description

With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.

2192QCAD (main)Feature RequestLowAdd "Define angle using mouse cursor" to Move and Rotat...Assigned
0%
2 Task Description

The “Define annge using mouse cursor” of the Rotate tool would be useful in the Move and Rotate Tool

1887dwg2bmpFeature RequestLowAdd "-max-lineweight" option for dwg2bmpAssigned
0%
2 Task Description

Hi there,

A friendly request to add the option to set a maximum lineweight for raster conversions via dwg2bmp.

Depending on the LW configuration of the CAD file, rasterization operations sometimes yield terrible results (see attachment). This would also mirror the similar “-min-lineweight” options available on “dwg2svg” and “dwg2pdf” (although not on “dwg2bmp”).

See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=6298

Thanks!

1473QCAD (main)Feature RequestLow"Partial" circular/radial dimensionsAssigned
0%
2 Task Description

This is kind of related to FS#952, or rather a superset of it.

Consider the situation in the attached image. There is a perfectly good, albeit really shallow arc, making the radius somewhere in the vicinity of 600 millimeters, and the radial dimension being drawn accordingly.

Considering the other dimensions of the part, this is completely unusable, even to work with, really, but definitely so when it needs to be put on paper.

It would be nice to have some sort of “partial” (for my lack of a better word) radial/diametric dimensions where the dimension length can be adjusted.

Considering that this can be done with Leader, maybe a better (more generic) solution would be for Leader type dimensions to have options so they could automatically generate labels for various dimensions of a selected entity – sort of like having the Prefix/Tolerance/Scale options the other dimensions have, and have some additional fields there for selected entity and maybe dimension type (for example, radial or diametric for an arc-type entity).

681QCAD (main)Feature RequestLow'Plug-in' for Gear generatorAssigned
0%
2 Task Description

Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc...
To produce 2D templates for all sorts of projects.

2284QCAD (main)Bug ReportLowZooming in & out causes grid/snap scale value change in...Assigned
0%
1 Task Description

I have set the grid/snap value to X=.0625 Y=.0625 on all 4 viewports.
When zooming in and out the grid/snap scale changes from .0625 to 3.90625. at this point the grid/snap points differ,
This causes a variation in the grid/snap reference points lending to drawing errors.

example
When I use the grid settings defaults .01, when zooming in and out, the grid/snap scaling doesn’t seem to have this issue.
Other values do, See below.

set value first zoom second zoom next zoom

	point		point		point ...	

0.01 0.1 1.0 10.0 ...
0.02 0.04 0.4 4.0 ...
0.04 0.16 1.6 16.0 ...
0.05 0.25 2.5 25.0 ...
0.0625 0.390625 3.90625 39.0625 ...
0.0254 0.64516 6.4516 64.516 ...

Why is there a squaring of the original set value? Which then becomes a new zoomed grid/snap value?

QCAD Professional
Version: 3.26.4.0 (3.26.4)
Internet: QCAD.org
Build Date: Jun 3 2021
Revision: 0bb4334
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

2538QCAD (main)Bug ReportVery LowWeight 2.11 French translation typoAssigned
0%
1 Task Description

Andrew,

When switched to French I detected a typo in the drop down box for Lineweight.

Weight 2.11mm is listed as 1.58mm {2.11m?}
https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts#L1228-L1229
Also see attached image file.


May I ask why only ISO types have a comma instead of a point in French.
The use of a comma is uncommon in the Property Editor even when that is the native decimal separator.
I also detect an extra space between the value and ‘mm’ and that only for the ISO types.

This only occurs in:
https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pl.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pt.ts


Probably not OS or QCAD version related.

Regards,
CVH

1541QCAD (main)Feature RequestLowView > Zoom > Zoom In/Out: Make zoom factor configurabl...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

1443QCAD (main)Bug ReportVery LowView > Status Bar remains uncheckedAssigned
0%
1 Task Description

Status Bar menu remains unchecked even it is toggled on or off

1133QCAD (main)Feature RequestLowView > Add View: save layer stateAssigned
0%
1 Task Description

Save layer state (visibility) with each added view object (optional?).

724QCAD (main)Feature RequestLowUseless reference point entering when moving relativelyAssigned
0%
1 Task Description

Hi,
this is a usability feature request:

If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.

It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).

Thx

2162QCAD (main)SuggestionLowUpdate the parameter with simplify of RPolylineData & R...Assigned
0%
1 Task Description

Unrelated to OS, nor version

Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372

Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated.
The Classes still refer to an ‘angleTolerance’.

Regards,
CVH

2177DocumentationSuggestionLowUpdate class_r_polyline.htmlAssigned
0%
1 Task Description

Include RPolyline.getLeftRightOutline() method in class_r_polyline.html

In use since 11 Sept 2020

CVH

779QCAD (main)Feature RequestLowTurning detailed view on/offAssigned
0%
1 Task Description

My system: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz and 8 GB of RAM and NVIDIA GT218 (GeForce 210)

For a normal drawing displaying it in all detail is a good thing and the performance of my quad-core system is more than adequate.

But I discovered (or rather experienced) that when putting a large collection of individual drawings of gears onto one big sheet (960 mm x 600 mm - preparation for laser cutting), the performance was so bad that I had to wait several seconds (>10 sec) for each step in the process of arranging all the parts on the layer.

Request: It would be a big help and performance booster if you could disable the detailed view of each part/layer and only draw a rectangle to visualize the outline of the part.

Please take this in consideration. Attached you find an example of how that could look like. (Actually when pasting a drawing from the clipboard you already do that.)

784QCAD (main)Feature RequestLowTurn text into hatched polylinesAssigned
0%
1 Task Description

Would it be possible to add a feature which turns selected text into solid fill hatched polylines?

That would make it possible to migrate the drawing from one computer system to another without having to worry whether the used font is installed on both systems, like when sending a drawing to a manufacturer for laser engraving.

Right now I can do it by hand, letter by letter, and that is a rather labour-intensive task.

596QCAD (main)Feature RequestLowTool "Lengthen" mit "Total" erweitern oder ....Assigned
0%
1 Task Description

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel ;-)

708QCAD (main)Feature RequestLowTo re-introduce Tile and Cascade window optionsAssigned
0%
1 Task Description

To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.

2248QCAD (main)Bug ReportVery LowThemes: east and west dock widget tabs facing the wrong...Assigned
0%
1 Task Description

Hi Andrew

In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions.
I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report.
I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..

Best Regards
John Hyslop
PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu

2205QCAD (main)Bug ReportLowText rendering fails in certain zoom levelWaiting on fix in 3rd party library
0%
1 Task Description

Case:
Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level

Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.

2348QCAD (main)Bug ReportLowtext in simple format do not save position after save t...Assigned
0%
1 Task Description

How to reproduce the bug:
1-open a new file
2-select text tool, simple text(one line,no formatting) and alignment in base-left
3-write some text in somewhere position in the draw, repeat this in others positions
4-save the file in .dxf R15 [2000/LT2000] (dxflib) format
5-close Qcad
6-open the saved file, the writhed text lose original position and now all the text have 0,0 position

979QCAD (main)Feature RequestLowText dialog: insert special characters in simple text m...Assigned
0%
1 Task Description

The Omega button to insert special characters is only available in rich text mode.
Make it available in simple text mode as well.

864QCAD (main)Bug ReportLowTemplate Preview/Info doesn't shows the sheet orientati...Assigned
0%
1 Task Description

“Create New Drawing from Template” Browser can’t readout the Page orientation ...

1242QCAD (main)Bug ReportLowSVG import DPI box should use localized decimal separat...Assigned
0%
1 Task Description

I wanted to make it so, that SVG units translate 1:1 into CAD units; I use the German localized QCAD and entered 25,4 into the box with the wrong result, i.e. the same as 25; Entering 25.4 got me what I wanted: The question box needs the point and ignores the comma. Would be nice if it could use the localized separator.

2406QCAD (main)Bug ReportLowSVG Export incorrect on blocksAssigned
0%
1 Task Description

When using SVG export on a drawing with a block defined, the export is incorrect. Arcs are drawn incorrectly and parts of the block are missing. If that block is exploded, the SVG export is correct. Attached is a block on the lower left and the same block on the lower right after explode. Also attached is the resulting SVG file.
This is not always the case. Some blocks are correctly exported to SVG. The upper row is again a block on the left and the same block exploded on the right. It exports properly.

2178QCAD (main)Bug ReportLowStored Color of text dimension changesAssigned
0%
1 Task Description

QCAD Pro 3.25.2.7 Win7 Wininstaller 32bit
Related Topic:
https://www.qcad.org/rsforum/viewtopic.php?&t=7954

Reported is that black is saved as #00004c (dark blue)
Radek (iMac (Retina 5K, 27-inch, 2017), Catalina 10.15.7 (19H114)

My system/installation saves black as #4c000 (dark red)

When using single primary colors these get reduced to #4c, #7f, #99, #cc & #ff.
The threshold for that are #00, #65, #8b, #b2 & #e5
See: DimColorScale (png & dxf)

8 standard CAD colors fail saving correct
Black (something with #4c)
Dark Red, Dark Green, Dark Blue, Dark Cyan, Dark Magenta, Dark Yellow
(#80 turns #7f)
& Gray
(#adadad instead of #a0a0a4)

As with Gray, when mixing the 3 colors it gets rather fuzzy ...
#505050 & #555555 both turn #5b5b5b
&
#464646 turns #4c4226

A snippet of my investigation is included in the topic
(45 files in a ZIP)

CVH

1407QCAD (main)Feature RequestLowSplines: add support for knot weights, start-, end tang...Assigned
0%
1 Task Description

Attached DWG/DXF files are incorrectly read by QCAD.
They contain splines drawn using ZWCAD and saved as DWG/DXF version 2000.
Above splines are polylines created with autolisp routine which converts spline to polyline, so you can see how splines should actually be drawn.

First spline is created with fit points: 2,2 4,4 6,2
Then copied and applied weight of 2 on central control point.
Then copied again and applied weight of 0.5 on central control point.

Second spline is created with fit points: 6,2 8,4 10,2 with vertical start and end tangent.
Then copied and applied fit tolerance of 1 for fit points.

Third spline is created with fit points: 10,2 12,4 14,2 with horizontal start and end tangent.

Fourth and fifth spline are correctly drawn by QCAD.

Link to bitmap (converted to png) export:
External Link

Versions
QCAD version: 3.13.1.0
Date: Mar 17 2016
Qt version: 4.8.4
Compiler version: gcc 4.4.3
Build Date: Mar 17 2016
Revision:
Architecture: x86_64
OS: Linux
OS version: Unknown

1878QCAD (main)Feature RequestLowSnap > Distances from 2 Points: snap to point with give...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211

728QCAD (main)Performance IssueLowSlow loading of drawing with many block insertsAssigned
0%
1 Task Description

Slow loading of drawing with huge number of block inserts (more than 10000).

2338QCAD (main)Feature RequestLowShow non-QCAD custom XDATA optionallyAssigned
0%
1 Task Description

QCAD (before version 3.27?) used to show some custom XDATA, e.g. tag 1000, even for application names that are not “QCAD”, which for me was useful, so it’s somewhat of a regression. (I think it was broken when selecting multiple items, maybe that’s why it was removed.)

I suggest to bring that feature back, but maybe show it only when a single element is selected if that’s easier.

(As a workaround/hack I guess it would be possible to rewrite the required information as QCAD compatible XDATA externally I guess.)

566QCAD (main)Feature RequestLowShortkey for rectangle text rotationAssigned
0%
1 Task Description

I would like to get a shortkey like ‘+’ to rotate text at 90° clockwise.

1755QCAD (main)Feature RequestLowSelecting standard rotation angles by mouse click for M...Assigned
0%
1 Task Description

This would be nice.
It will save a lot mouse - keypad changes for me.

2448QCAD (main)Feature RequestLowScale lineweight display on model spaceAssigned
0%
1 Task Description

Currently, the model space can display lineweights at scale 1:1
It’s very convenient when drawing small objects that will be printed at scale 1:1 : it makes it easy to anticipate the final aspect of the printed drawing.
But this feature is unusable for architects or users who draw large objects.

Therefore, it would be very useful to have a factor to multiply lineweight display in model space.
For example : if i know my drawing will probably be printed at scale 1:50, i set the value of the lineweight factor to 50.
Then every line would be displayed 50x thicker in model space.

1903QCAD (main)Feature RequestLowSaving layer settings, e.g. visibility status, associat...Assigned
0%
1 Task Description

In a medium complex drawing it may be too much details to have all layers in a drawing visible at once.

Instead a number of views would be created that saves not only zoom level and position but also what layers are visible and not (as appropriate for the purpose of that particular view). This is very cumbersome (to the extent it is not really realistic) to achieve today and requires a lot of duplication of both model and layers.

The advantage of adding this is the ability to have only one model (with multiple views) and avoid duplication of work and the risk of inconsistency inherent with many copies of the model.

As a further (and natural extension to this) would be the ability to used this functionality with view-ports to be able to create (possibly many) paper-spaces from a single model. This would however require view-ports to be aware of what view they are a window into. A single change in the model would then propagate to all defined view-ports and paper-spaces.

2195QCAD (main)Feature RequestLowSaved views include memory of blockAssigned
0%
1 Task Description

When saving a view, it would be great if the view also saved which block (model space, layout block, or any other block) that was active at the time the view was saved and when the view is later re-activated, the corresponding block would re-activate.

1087QCAD (main)Bug ReportLowRuler ticks are not corresponding to the grid pointsAssigned
0%
1 Task Description

Ruler ticks are not corresponding to the grid points,
Ruler will completely disappear at a certain zoom level,

Settings:
Drawing unit: inch,
Grid settings: Grid 1, Meta Grid 12,
Dim Label Format: “Engineering, 0’-0.0”

see topic below:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014

2482QCAD (main)Bug ReportLowRShape::getIntersectionPointsCC still failing for touch...Assigned
0%
1 Task Description

Andrew,

Referring to this forum post:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10152

With radii 1341.35667735 and 26 the relative tolerance is 0.00683678 and exceeds the former used fixed tolerance of 1e-4.

These arcs will then be considered to be tangent and the intersection point is 0.31024 units to the left of where we expect it.

Implemented: https://github.com/qcad/qcad/commit/77ae3e4518cc34f178779d2d2c724adcf80c229d#diff-dcc4e31eaeaed5a047f65dbce4ddda4bcd4d604e9e1005ee8481ded273768449

Updated: https://github.com/qcad/qcad/commit/071b60acd1176e6301bf6b6fcf716684221a97e8#diff-dcc4e31eaeaed5a047f65dbce4ddda4bcd4d604e9e1005ee8481ded273768449

I had already expressed my reserves on the relative tolerance but that was already a better solution for small arcs:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8775&p=34907#p34907

We could limit the tolerance by:
A- The smallest of the fixed and the relative.
B- A relative tolerance based on R2 there circle 1 is forced to be the larger one.

This will never account for the position in the plane.
At a certain point the tolerance will be less than the accuracy/certainty of the values.

Regards,
CVH

2301QCAD (main)Feature RequestLowRotate preview on/offAssigned
0%
1 Task Description

Hi,

I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.

It would be nice to have an option to turn this preview on/off.

2495ECMAScriptBug ReportVery LowRLine.isParallel(RLine) may return true for certain non...Assigned
0%
1 Task Description

Andrew,

It took me a while to find the source of a certain freak bug I encountered.
I used the RLine.isParallel(RLine) as a test for knowing if line segments were parallel or not.

Included below is script code that mimics the functionally of isParallel().

As far as I know isParallel() is nowhere used in the QCAD open source.
Textual only found in RLine.cpp & .h or under: opennurbs, ecmaapi\generated and ecmagenerator\src.

// Example:
// RShape1: RLine(RShape(address: "0xcd70e28"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(1010.000000, -140.000000, 0.000000, 1)")
// RShape2: RLine(RShape(address: "0x7659770"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(930.000000, -340.000000, 0.000000, 1)")
----
var aShape1Angle = shape1.getAngle();    // =0.6640461628266838 rad
var aShape2Angle = shape2.getAngle();    // =4.483157047107694 rad
----
// RLine::isParallel(RLine) -> aTest1 || aTest2
var aTest1 = RMath.isSameDirection(aShape1Angle, aShape2Angle);              // =false
var aTest2 = RMath.isSameDirection(aShape1Angle, aShape2Angle + Math.PI);    // =true
var aTestOr = aTest1 || aTest2;                                              // =>TRUE !?
----
// # BUG # RShape1 is considered as parallel with RShape2
----
// RMath::isSameDirection(dir1, dir2, tol) ... tol = RS.AngleTolerance = 1e-9
// for aTest1 -> ax1Test1 || ax1Test2
var ax1Dif = Math.abs(aShape1Angle - aShape2Angle);    // =3.8191108842810104 rad
var ax1Test1 = ax1Dif < 1e-9;                          // =false
var ax1Test2 = ax1Dif > 2*Math.PI - 1e-9;              // =false
var ax1TestOr = ax1Test1 || ax1Test2;                  // =>FALSE
----
// for aTest2 -> ax2Test1 || ax2Test2
var ax2Dif = Math.abs(aShape1Angle - (aShape2Angle + Math.PI));    // =6.9607035378708035 rad
var ax2Test1 = ax2Dif < 1e-9;                                      // =false
var ax2Test2 = ax2Dif > 2*Math.PI - 1e-9;                          // =true
var ax1TestOr = ax1Test1 || ax1Test2;                              // =>TRUE
----
// # BUG # The second test of the second isSameDirection() test returns true because ax2Dif is over 2pi

Regards,
CVH

2540QCAD (main)Feature RequestLowRetain original handle when Hatch properties are change...Assigned
0%
1 Task Description

Andrew,

When we alter about any property of a Hatch entity it seems to be recreated with a newer/higher handle.
This doesn’t influence the drawing order in direct.
But already changing the drawing order of a Hatch it is recreated as a new entity.

It starts to matters in drawing order when there are multiple entities with the same drawing order and that after save/reload. Entities with the same drawing order then receive a new drawing order based on the original but sequentially increasing based on handle.

Because a Hatch is recreated with a newer/higher handle each time a property changes it will thus always end up above the others with the same order even when the original was created earlier.

This is more pronounced when copying/pasting entities from a source to a target drawing.
The original Hatch drawing order is retained but it will always be above existent entities with the same drawing order in the target drawing after save/reload.

Most other entities are probably just updated in situ.
It is unsure to me at this point if merely updating a Hatch is even possible.
And perhaps this is related to the addObject ForceNew flag what is false by default.

Regards,
CVH


	
2370QCAD (main)Feature RequestLowRetain global width / segment widths when reversing pol...Assigned
0%
1 Task Description

Andrew,

Changing orientation of a polyline with RV or by changing it in the Property Editor clears the global width value.

Single line pieces as polyline default to CCW.
Still the global width is cleared when trying to set them CW.

I didn’t update since 3.27.0 but reading this topic I suppose it still is valid.
Related: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9362

Regards,
CVH

1027QCAD (main)Feature RequestLowRectangle with a 3 point determination ...Assigned
0%
1 Task Description

Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.

We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.

My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.

1. First point: start

2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle

3. third point: determination second side (height?)

I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...

995QCAD (main)Feature RequestLowProperty editor: add 'edit block' buttonAssigned
0%
1 Task Description

Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.

1104QCAD (main)Feature RequestLowPrinting: Add support for page rangeAssigned
0%
1 Task Description

When printing from the preview mode a standard Windows popup shows, letting me select the printer, number of copies and a page range. Unfortunately QCAD (or Windows) ignores the page range - it always prints all pages. So right now I always have to copy the parts I want to print, page them into a separate document and print that instead - even though I got all my stuff nicely lined up for printing on multiple pages.

1288QCAD (main)Feature RequestLowPrint Preview Scaled RulersAssigned
0%
1 Task Description

Would be nice, if in print preview QCAD rulers would switch to paper dimensions. Chat here http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

After all, print preview is not just the drawing on white, isn’t it? Everything else should stay in drawing units. Just the rulers, maybe a preference?

Showing tasks 101 - 150 of 519 Page 3 of 11 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing