|
1443 | QCAD (main) | Bug Report | Very Low | View > Status Bar remains unchecked | Assigned | |
1 |
Task Description
Status Bar menu remains unchecked even it is toggled on or off
|
|
1691 | QCAD (main) | Bug Report | Very Low | Issue with Layouts after "File-Revert" | Assigned | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically. 2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .
For example can try on “flange.dxf”
|
|
1719 | QCAD (main) | Bug Report | Very Low | Undo on converted drawing leads to wrong label position... | Assigned | |
|
Task Description
Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.
|
|
1900 | QCAD (main) | Bug Report | Very Low | Remote shares initially not accessible. | Assigned | |
|
Task Description
My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.
While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.
Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.
Drag and Drop from a remote share will never work.
|
|
1905 | QCAD (main) | Bug Report | Very Low | View > Property Editor: Changing attribute of block cha... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947
|
|
1923 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polylines with Global/Local Widths and... | Assigned | |
1 |
Task Description
Win7pro 32bit Qcad 3.23.0
Andrew, The Arc segments of Polylines with Global or any Local Width render faulty where Global Z or any of the arc’s local Z is not zero.
In the attached drawing setting the Global Z of the inner poly to 5,10,...
The setting of Z to not zero affects the radius of the projected arc and not the bulging of the poly. It also affects the projected widths of the line inversely, but not by changing the widths properties.
Pritty rare combination! True. Qcad is 2D native! True.
Flatten will resolve this.
It is not a purely visual rendering fault, the poly will explode as such.
Maybe similar flaw as with uneven scaling blocks with arcs. https://qcad.org/rsforum/viewtopic.php?f=8&t=5566#p20703
Regards
|
|
1974 | QCAD (main) | Bug Report | Very Low | File > Print Preview: Cannot move paper in new drawing | Unconfirmed | |
|
Task Description
Yesterday I set up a Windows 64 bit install of QCAD Pro which shows the same bug I have been seeing for a while in the Community linux git repo.
Create a new drawing and then go to “Print preview”. Enable “Move paper postion”, the cursor changes to the hand icon, but the paper position is unable to be moved. Only by saving the drawing, exiting the program, restarting and reopening the drawing, will the “Move paper postion” function correctly.
Affected versions tested:
Windows 64bit installer download, as of yesterday. Linux 64bit build from git, about 20minutes ago.
For what it’s worth, this bug is not present in this previous git checkout:
Version: 3.21.1.0 (3.21.1) Internet: QCAD.org Build Date: Jul 2 2018 Revision:
Qt Version: 5.7.0 Architecture: x86_64 Compiler: gcc 6.3.1
Thanks for a great product.
|
|
2048 | QCAD (main) | Bug Report | Very Low | Move / Copy to current layer fails when reference point... | Assigned | |
|
Task Description
QCAD 3.24.2 / macOS x86_64 10.14.6
Starting with empty doc: 1. Draw any object (e.g. a rectangle) on layer 0. 2. Create new layer (”1”) with color, say yellow. 3. Select new layer 4. Select new object 5. Modify → Move / Copy 6. Click reference point 7. Click target point same as reference point 8. In “Move / Copy Options” dialog, select “Delete Original” and check “Use current layer and attributes.” Click OK.
The moved object stays on the layer it was previously on. Using “Move / Copy” as a quick way to move a selection between layers is not useful even though it appears to be the recommended way in a Google search.
Note: if “Keep Original” is selected instead, the copied object is placed on the current layer and the original object remains on its layer, as expected.
Note: if the target point is different from the reference point, the moved object is placed on the current layer as expected.
There are other workarounds too, cut / paste with “To current layer” checked seems to work, as does chaging the layer in the Properties Editor.
|
|
2068 | QCAD Community Edition | Bug Report | Very Low | Non-english text in upper/lower index becomes UTF code | Assigned | |
|
Task Description
How to reproduce.
1. Create a text field with some non-english words in the upper index. (see attached pic1.png) 2. Save the project and close QCAD. 3. Run QCAD and open same project. 4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)
Tried different fonts - doesn’t help.
Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux CentOS Linux release 7.7.1908 (Core)
|
|
2088 | QCAD (main) | Bug Report | Very Low | column headers of the "General: tool settings " resize... | Assigned | |
|
Task Description
Open QCAD and the application preferences. In the section “General: tool settings " you can resize the columns: Menu, Shortcuts etc. The problem is that it is not intuitive. The first divider is not selectable and the second moves the first, only backwards.
|
|
2097 | QCAD (main) | Bug Report | Very Low | Very hard to snap to baseline reference point of dimens... | Assigned | |
|
Task Description
With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension. I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.
|
|
2098 | QCAD (main) | Bug Report | Very Low | Offset will pick up hidden blocks while using it in a l... | Assigned | |
1 |
Task Description
When I’m drawing inside a layout block the offset tool picks up lines from blocks that are hidden. It is not happening with all the block.
|
|
2155 | QCAD (main) | Bug Report | Very Low | Faulty rendering Polyline Arcs with Width = 2R | Assigned | |
1 |
Task Description
QCAD Professional Win installer 32bit Version: 3.25.2.4 (3.25.2.4) Internet: QCAD.org Build Date: Nov 18 2020 Revision: 40f4475 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Most likely not related to the QCAD version, rather an old sore.
File included Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803 Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’
Polyline arcs with Width = 2R render as circle segments rather than circle sectors. As Non-reversed arcs these don’t explode. As reversed arc these explode to a single arc rather than a circle sector contour.
There is also still the faulty rendering with Z not zero https://qcad.org/bugtracker/index.php?do=details&task_id=1923
Regards, CVH
|
|
2176 | QCAD (main) | Bug Report | Very Low | Modify > Break out Manual: relevance of order of click ... | Assigned | |
1 |
Task Description
QCAD Professional Windows 7; Win installer 32 bit Version: 3.25.2.7 (3.25.2.7) Internet: QCAD.org Build Date: Dec 16 2020 Revision: e06f230 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988 File included. I have no intention to make 48 separate reports.
CVH
|
|
2248 | QCAD (main) | Bug Report | Very Low | Themes: east and west dock widget tabs facing the wrong... | Assigned | |
1 |
Task Description
Hi Andrew
In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions. I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report. I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..
Best Regards John Hyslop PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu
|
|
2290 | QCAD (main) | Bug Report | Very Low | loading the Drawing Preferences using enter, using ente... | Assigned | |
|
Task Description
I use CTRL + I to pull up drawing preferences. Upon changing the dimension settings quickly and closing it normally by pressing enter it closes. But if i go to the next tab (drawing tab) then press enter to load it up quickly instead of pressing CTRL + I. Upon changing the dimensions settings and pressing enter to close it, it won’t close but instead flash and i have to keep pressing enter and eventually it closes.
I think this is a bug.
I have the Pro Version
|
|
2302 | QCAD (main) | Bug Report | Very Low | polygon.getSelfIntersectionPoints(tol) returns 3th inva... | Assigned | |
1 |
Task Description
Windows 7 pro 32 bit msi-Installer Version: 3.26.4.5 (3.26.4.5) Internet: QCAD.org Build Date: Jul 20 2021 Revision: e596276 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Andrew,
In the attached dxf: Besides that it is clear that duplicate vectors are not filtered ... Where a segment is crossing in another node a non valid node is returned as self-intersection point. Seems to be unrelated to CW/CCW or tolerance.
Where 2 nodes coexists 4 duplicate vectors are returned.
Regards, CVH
|
|
2328 | QCAD (main) | Bug Report | Very Low | drop down, using keyboard | Assigned | |
|
Task Description
Minor issue! When using keyboard to initiate the dropdown menus. I noticed the ALT “D” does not cycle through the headings Draw & Dimension in the same way. ALT “M” cycles though Modify & Misc or ALT “S” cycles though Select & Snap. User Name: StanTibbs E-mail: [email protected]
|
|
2415 | QCAD (main) | Bug Report | Very Low | Issues with OffsetBothSides | Assigned | |
1 |
Task Description
Andrew,
I can’t find any documentation concerning OffsetBothSides under Misc .. Modify. It is not listed in the QCAD features nor in the changelog.
There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.
The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline. It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.
There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing. The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.
I only successfully created a dual offset for open Splines, open or logically open Polylines. All other attempts result in a single offset at the indicated side.
There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected. Only tested it on a Win7 platform. I don’t suspect that version 3.27.8 includes a fix for that ...
Regards, CVH
|
|
2440 | QCAD (main) | Bug Report | Very Low | Hatch from Segments > False positives open loop warning... | Assigned | |
1 |
Task Description
Andrew,
Most probably not related to OS or QCAD version.
When hatching an area with Hatch from Segments (HS) there might be false positive warnings on open loops. It seems that this is related to the orientation of the indicated segments and the order of selection. The real problematic position is not always the first that is reported. Loop count is increased even if it is a single loop.
Included a basic test drawing to replicate these. Further details to replicate the issue are in the file.
Regards, CVH
|
|
2461 | dxflib | Bug Report | Very Low | ASCII Control characters not handled correctly in Commu... | Assigned | |
|
Task Description
I see the following problem: When I open a particular DXF file in the Professional Trial version 3.27.9.0 on macOS, “^I” in text fields is expanded to whitespace. When I open the same DXF file in the Community Edition 3.27.9.0 on NetBSD/x86_64 (installed from pkgsrc), “^I” in text fields is visible as “^I”.
|
|
2494 | QCAD (main) | Bug Report | Very Low | Information scrip on drawing screen unaligned. | Waiting on User | |
|
Task Description
Please view the attachment.
Regards
Graeme
|
|
2495 | ECMAScript | Bug Report | Very Low | RLine.isParallel(RLine) may return true for certain non... | Assigned | |
1 |
Task Description
Andrew,
It took me a while to find the source of a certain freak bug I encountered. I used the RLine.isParallel(RLine) as a test for knowing if line segments were parallel or not.
Included below is script code that mimics the functionally of isParallel().
As far as I know isParallel() is nowhere used in the QCAD open source. Textual only found in RLine.cpp & .h or under: opennurbs, ecmaapi\generated and ecmagenerator\src.
// Example:
// RShape1: RLine(RShape(address: "0xcd70e28"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(1010.000000, -140.000000, 0.000000, 1)")
// RShape2: RLine(RShape(address: "0x7659770"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(930.000000, -340.000000, 0.000000, 1)")
----
var aShape1Angle = shape1.getAngle(); // =0.6640461628266838 rad
var aShape2Angle = shape2.getAngle(); // =4.483157047107694 rad
----
// RLine::isParallel(RLine) -> aTest1 || aTest2
var aTest1 = RMath.isSameDirection(aShape1Angle, aShape2Angle); // =false
var aTest2 = RMath.isSameDirection(aShape1Angle, aShape2Angle + Math.PI); // =true
var aTestOr = aTest1 || aTest2; // =>TRUE !?
----
// # BUG # RShape1 is considered as parallel with RShape2
----
// RMath::isSameDirection(dir1, dir2, tol) ... tol = RS.AngleTolerance = 1e-9
// for aTest1 -> ax1Test1 || ax1Test2
var ax1Dif = Math.abs(aShape1Angle - aShape2Angle); // =3.8191108842810104 rad
var ax1Test1 = ax1Dif < 1e-9; // =false
var ax1Test2 = ax1Dif > 2*Math.PI - 1e-9; // =false
var ax1TestOr = ax1Test1 || ax1Test2; // =>FALSE
----
// for aTest2 -> ax2Test1 || ax2Test2
var ax2Dif = Math.abs(aShape1Angle - (aShape2Angle + Math.PI)); // =6.9607035378708035 rad
var ax2Test1 = ax2Dif < 1e-9; // =false
var ax2Test2 = ax2Dif > 2*Math.PI - 1e-9; // =true
var ax1TestOr = ax1Test1 || ax1Test2; // =>TRUE
----
// # BUG # The second test of the second isSameDirection() test returns true because ax2Dif is over 2pi
Regards, CVH
|
|
2497 | QCAD (main) | Bug Report | Very Low | Draw > Circle > 3 Tangents (CT3) fails in some cases wi... | Assigned | |
1 |
Task Description
Andrew,
See attachment with example:
Solution included on layer ‘Solution’.
Regards, CVH
|
|
2538 | QCAD (main) | Bug Report | Very Low | Weight 2.11 French translation typo | Assigned | |
1 |
Task Description
Andrew,
When switched to French I detected a typo in the drop down box for Lineweight.
Weight 2.11mm is listed as 1.58mm {2.11m?} https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts#L1228-L1229 Also see attached image file.
May I ask why only ISO types have a comma instead of a point in French. The use of a comma is uncommon in the Property Editor even when that is the native decimal separator. I also detect an extra space between the value and ‘mm’ and that only for the ISO types.
This only occurs in: https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pl.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pt.ts
Probably not OS or QCAD version related.
Regards, CVH
|
|
2539 | QCAD (main) | Bug Report | Very Low | (Relative) Polar feet + surveyor notation fails. | Assigned | |
1 |
Task Description
Andrew,
A user essentially pointed out to an ACAD textbook example. https://qcad.org/bugtracker/index.php?do=details&task_id=2533 Step 3 of: https://autodesk.blogs.com/between_the_lines/2012/07/drawing-with-surveyors-units-in-autocad.html
Please refer to this topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10652
Regards, CVH
|
|
2547 | QCAD (main) | Bug Report | Very Low | Block > Purge Unused Blocks > Removes _DatumFilled bloc... | Assigned | |
1 |
Task Description
Andrew,
The _DatumFilled Block used by Datum entities (DT) is considered as not used and is purged by Purge Unused Blocks (BP). There is no block association for these special types of arrowheads in QCAD.
After purging the Datums are not immediately updated but the special arrowheads will eventually disappear. Adding new Datums will not fix that.
Not problematic because the _DatumFilled Block is re-created on save/reload when Datum entities exists. Datums are updated.
Probably not OS or version related. Related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=10694
Best solution would be to support different types of arrowheads and all related: https://qcad.org/bugtracker/index.php?do=details&task_id=695 https://qcad.org/bugtracker/index.php?do=details&task_id=757 https://qcad.org/bugtracker/index.php?do=details&task_id=1157
Regards, CVH
|
|
498 | QCAD (main) | Bug Report | Low | issue importing from Autocad | Assigned | |
|
Task Description
There is an issue importing from Autocad: lines and quotes (both arrows and text) appear too much big (see attachment). I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick. Autocad’s dxf are opened with right line thickness but wrong quotes. Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.
|
|
513 | Translation | Bug Report | Low | Translation errors | Assigned | |
|
Task Description
If you spot an error in the translated user interface of QCAD, please add a comment to this task or submit your translation at http://translate.qcad.org. Thank you for your help!
Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu oder geben Sie Ihre Übersetzung ein unter http://translate.qcad.org. Vielen Dank für Ihre Hilfe!
Si vous remarquez une erreur dans l’interface utilisateur traduite de QCAD, veuillez ajouter un commentaire à cette tâche ou soumettre votre traduction à http://translate.qcad.org. Merci pour votre aide!
Si detecta un error en la interfaz de usuario traducida de QCAD, añada un comentario a esta tarea o envíe su traducción a http://translate.qcad.org. Gracias por tu ayuda!
Se si rileva un errore nell’interfaccia utente tradotta di QCAD, si prega di aggiungere un commento a questo compito o di inviare la traduzione a http://translate.qcad.org. Obrigado por sua ajuda!
Se você detectar um erro na interface de usuário traduzida do QCAD, adicione um comentário a esta tarefa ou envie sua tradução para http://translate.qcad.org. Obrigado pela sua ajuda!
Als u een fout ziet in de vertaalde gebruikersinterface van QCAD, voeg dan een opmerking toe aan deze taak of stuur uw vertaling naar http://translate.qcad.org. Bedankt voor uw hulp!
|
|
523 | QCAD (main) | Bug Report | Low | Selection tool button in CAD tool bar shows line tools ... | Assigned | |
|
Task Description
The selection tool is not accessible:
Click on Selection Tool icon - left panel:
Left panel then shows line tool options.
Click “back” button at top of left panel:
Left panel then shows selection options.
Click an option icon:
Left panel then shows line tool options again.
|
|
584 | QCAD (main) | Bug Report | Low | Library Items können unbrauchbar gemacht werden durch l... | Assigned | |
1 |
Task Description
Nach einigen Überraschungen ....
Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....
Fallbeispiel 1: Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt. Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat. Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will. In der Blocklist ist es natürlich immer noch verfügbar. In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden. Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt. Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.
Fallbeispiel 2: Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.
Fallbeispiel 3: Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....
Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?
|
|
641 | QCAD (main) | Bug Report | Low | No warning is displayed when lengthen tool is used with... | Assigned | |
|
Task Description
Command ‘Lengthen LE’ will extend most arcs but not all (2 arcs in the attached drawing do not work)! There is no obvious reason for this from the users point of view.
|
|
645 | QCAD (main) | Bug Report | Low | Inch - Layerdata / Linewight still in mm ... | Assigned | |
|
Task Description
Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....
I like it ... but maybe I’m the only one
|
|
665 | QCAD (main) | Bug Report | Low | Possible printing error on Linux fedora 16? | Assigned | |
|
Task Description
On behalf of et76 Possible printing error using Linux 16 - needs further testing! Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119
Au nom de et76 Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests! S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119
|
|
700 | QCAD (main) | Bug Report | Low | Saved 'hatched' block loses hatching when using isometr... | Assigned | |
|
Task Description
Hatched block loses hatching when using isometric projection tool: See -http://www.qcad.org/rsforum/viewtopic.php?f=32&p=7063#p7063
When manipulating a saved hatched block with the isometric tool it loses the hatching unless the block is exploded.
Is this normal behaviour here? or a bug?
|
|
705 | QCAD (main) | Bug Report | Low | Verwaltung Library Resourcen und Favoriten .... | Assigned | |
|
Task Description
Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....
Hier meine Gedanken ....
In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.
Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.
Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.
Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!
OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”: QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!
Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.
|
|
714 | QCAD (main) | Bug Report | Low | Isometric view tool bar doesn`t remain ' docked'. | Assigned | |
|
Task Description
Win 7 - 64 Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.
|
|
721 | QCAD (main) | Bug Report | Low | Vertical dimensions imported as horizontal dimensions | Assigned | |
|
Task Description
Vertical dimensions created with 3rd party applications are sometimes imported as horizontal dimensions with length 0. Changing the angle in the property editor fixes the problem. Problem occurs in QCAD 2.2 and QCAD 3.0.
|
|
729 | QCAD (main) | Bug Report | Low | Preferences not stored on some installations | Assigned | |
|
Task Description
Preferences not stored on some installations
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&view=unread#unread
|
|
733 | QCAD (main) | Bug Report | Low | QCAD Trial: batch tool dwg2bmp produces no output | Assigned | |
|
Task Description
Some users are experiencing problems with dwg2bmp.
See forum at: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2272&view=unread#unread
|
|
735 | QCAD (main) | Bug Report | Low | Angle dimensioning | Assigned | |
1 |
Task Description
See http://www.qcad.org/rsforum/viewtopic.php?f=11&t=2274&view=unread#unread
|
|
736 | QCAD (main) | Bug Report | Low | snap tool menu is shown before specifiv tool menu | Assigned | |
|
Task Description
When creating a new file, selecting the e. g. line tool at first opens the linemenu and the snap tool menu as expected. After clicking on the back button twice (going back to the main menu) and selecting the e. g. circle menu, the snap tool menu is shown instead of the circle menu. Instead the circle menu is shown after pressing the back button again.
This only happens when clicking on the back button, but with any tool menu seleected. Pressing escape to go back does not show this problem.
QCAD is running on Mac OS Mountain Lion.
|
|
754 | QCAD (main) | Bug Report | Low | Adding or removing additional viewports - gives unwante... | Assigned | |
|
Task Description
Windows 7-64 3.0.7 When adding or removing additional viewports,an extra unnecessary window of the viewport is created.
|
|
756 | QCAD (main) | Bug Report | Low | Display problem in the Text "Character Map" ... | Assigned | |
1 |
Task Description
XP/32
Go to: Text → Special Characters → Others → “Character Map” pops up. Adjust Zoom to 100% = display problem (not enough space for the single character.
|
|
772 | QCAD (main) | Bug Report | Low | Isometric grid: toggle buttons not updated | Assigned | |
1 |
Task Description
- Switch isometric grid off - Switch isometric grid on using drawing preferences - Tool buttons don’t reflect correct status
|
|
794 | QCAD (main) | Bug Report | Low | Applying Solid grid lines - not working | Assigned | |
1 |
Task Description
Windows 3.0.8 Application preferences > Graphics View > Appearance - Solid grid lines doesn’t change anything?
|
|
864 | QCAD (main) | Bug Report | Low | Template Preview/Info doesn't shows the sheet orientati... | Assigned | |
1 |
Task Description
“Create New Drawing from Template” Browser can’t readout the Page orientation ...
|
|
879 | QCAD (main) | Bug Report | Low | Autosave function not working if file is opened directl... | Assigned | |
1 |
Task Description
If a file is opened by clicking on it in an open ZIP archive, autosave will not work.
Linux Mint -64
Autosave function not working, error warning given instead!
|
|
893 | QCAD (main) | Bug Report | Low | Library Browser - Edit Library Item - opens drawings al... | Assigned | |
|
Task Description
Library Browser - Edit Library Item - opens drawings always with grid.
- If I switch between opened drawings back and forth the grid will disappear .... - If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....
Just Cosmetic ...
|
|
948 | QCAD (main) | Bug Report | Low | mainwindow example segfaults | Assigned | |
|
Task Description
As far as I can tell, it never worked.
#0 0x0000000000490527 in QFormInternal::domPropertyToVariant ()
No symbol table info available.
#1 0x000000000042aea9 in QFormInternal::QAbstractFormBuilder::toVariant ()
No symbol table info available.
#2 0x00000000004498a6 in QFormInternal::QFormBuilder::applyProperties ()
No symbol table info available.
#3 0x000000000042475f in QFormInternal::FormBuilderPrivate::applyProperties ()
No symbol table info available.
#4 0x000000000042e83b in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#5 0x00000000004493c0 in QFormInternal::QFormBuilder::create ()
No symbol table info available.
#6 0x000000000042182e in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#7 0x000000000042fa37 in QFormInternal::QAbstractFormBuilder::create ()
No symbol table info available.
#8 0x00000000004225a2 in QFormInternal::FormBuilderPrivate::create ()
No symbol table info available.
#9 0x0000000815eed3d7 in QFormInternal::QAbstractFormBuilder::load ()
from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#10 0x0000000815ededad in QUiLoader::load () from /usr/home/ice/w/qcad/qcad/plugins/script/libqtscript_uitools.so.1.0.0
No symbol table info available.
#11 0x0000000815eda326 in qtscript_QUiLoader_prototype_call (context=0x813262240)
at ../../generated_cpp/com_trolltech_qt_uitools/qtscript_QUiLoader.cpp:282
_q_arg0 = (QIODevice *) 0x813fe5610
_q_arg1 = (QWidget *) 0x813ffdcd0
_q_result = (QWidget *) 0x8006e2c00
_id = <value optimized out>
_q_self = (QUiLoader *) 0x813f08d40
#12 0x0000000805fc9f78 in QScript::FunctionWrapper::proxyCall () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#13 0x0000000805ee418f in QTJSC::NativeFuncWrapper::operator() () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#14 0x0000000805eb93ee in QTJSC::Interpreter::privateExecute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#15 0x0000000805ec1ccd in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#16 0x0000000805ec1ff9 in QTJSC::Interpreter::execute () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#17 0x0000000805fa9743 in QScriptEnginePrivate::evaluateHelper () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#18 0x0000000805faabc6 in QScriptEngine::evaluate () from /usr/local/lib/qt4/libQtScript.so.4
No symbol table info available.
#19 0x0000000800ac5aae in RScriptHandlerEcma::eval (this=0x811f435e0, script=<value optimized out>,
fileName=<value optimized out>) at RScriptHandlerEcma.cpp:855
err = {d_ptr = {d = 0x7fffffffcf50}}
#20 0x0000000800ac65c5 in RScriptHandlerEcma::doScript (this=0x811f435e0, scriptFile=@0x7fffffffd2f0,
arguments=<value optimized out>) at RScriptHandlerEcma.cpp:851
fi = {d_ptr = {d = 0x813f94700}}
globalObject = {d_ptr = {d = 0x813ff1240}}
contents = {static null = {<No data fields>}, static shared_null = {ref = {_q_value = 3936}, alloc = 0, size = 0,
data = 0x809bb387a, clean = 0, simpletext = 0, righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}},
static shared_empty = {ref = {_q_value = 19}, alloc = 0, size = 0, data = 0x809bb389a, clean = 0, simpletext = 0,
righttoleft = 0, asciiCache = 0, capacity = 0, reserved = 0, array = {0}}, d = 0x811c11800, static codecForCStrings = 0x0}
#21 0x0000000000417d13 in MainWindow (this=0x7fffffffd4b0, parent=<value optimized out>) at MainWindow.cpp:99
No locals.
#22 0x0000000000416ad9 in main (argc=1, argv=<value optimized out>) at main.cpp:35
app = <value optimized out>
window = {<QMainWindow> = {<QWidget> = {<QObject> = {_vptr$QObject = 0x4992b0, static staticMetaObject = {d = {
superdata = 0x0, stringdata = 0x809933ae0 "QObject", data = 0x809933b80, extradata = 0x809ba94c0}},
static staticMetaObjectExtraData = {objects = 0x0,
static_metacall = 0x80985cd80 <QObject::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}, d_ptr = {
d = 0x811d28600}, static staticQtMetaObject = {d = {superdata = 0x0, stringdata = 0x80993cc40 "Qt",
data = 0x809940560, extradata = 0x0}}}, <QPaintDevice> = {_vptr$QPaintDevice = 0x499478, painters = 0},
static staticMetaObject = {d = {superdata = 0x809ba94e0, stringdata = 0x808e66be0 "QWidget", data = 0x808e670c0,
extradata = 0x809282360}}, static staticMetaObjectExtraData = {objects = 0x0,
static_metacall = 0x8087899a0 <QWidget::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>},
data = 0x811d28748}, static staticMetaObject = {d = {superdata = 0x809282380, stringdata = 0x808ec04c0 "QMainWindow",
data = 0x808ec0660, extradata = 0x8092abc60}}, static staticMetaObjectExtraData = {objects = 0x8092d1880,
static_metacall = 0x808e5aaf0 <QMainWindow::qt_static_metacall(QObject*, QMetaObject::Call, int, void**)>}},
documentInterface = 0x811d31600}
ret = <value optimized out>
|