|
708 | QCAD (main) | Feature Request | Low | To re-introduce Tile and Cascade window options | Assigned | |
1 |
Task Description
To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.
|
|
2091 | QCAD (main) | Feature Request | Low | Toggle redrawing of hatches | Assigned | |
2 |
Task Description
Because modifying hatches have lag issues I’d like to propose a toggle that turns of the redrawing/rendering of the hatch. Especially while modifying the hatch.
The hatches always have a boundary that can be worked with right? So when we move or stretch the hatch we can still see the boundary and its handles to perform all the actions.
This could be a new view mode that turns of the view of the interior/pattern of the hatch but leave the boundary of the hatch. Or the draft mode can be extended to include simplified hatches while modifying.
Also see the discussion
|
|
596 | QCAD (main) | Feature Request | Low | Tool "Lengthen" mit "Total" erweitern oder .... | Assigned | |
1 |
Task Description
Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.
Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.
Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.
Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel
|
|
1594 | QCAD (main) | Feature Request | Low | Tool matrix: allow reordering of tools | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923
|
|
2471 | QCAD (main) | Feature Request | Low | Tool request: Arc - 2 Tangents and radius ... | Assigned | |
2 |
Task Description
... inclusive trim option
I’m already able to use the Circle tool “2 Tangents and radius” to accomplish this task but it is a lot of break out etc. action needed to clean the shape afterward.
|
|
1983 | QCAD (main) | Feature Request | Low | Trim All or Bulk Break out | Assigned | |
4 |
Task Description
This is a trim method I am missing in Qcad.
20 years ago it existed in CadKey. You had a bunch of lines or segments. You defined a (new) line or segment as cutter. ‘Trim All’. You pointed at the side of the cutter entity to trim all intersecting at that side.
Pritty the same as in this topic: https://qcad.org/rsforum/viewtopic.php?t=5221
Only in rare cases I can use Husky’s workaround as pro. It all depends on what else is in the clipping rectangle that is needed to trim all intended. If of no use all single crossing entities have to be chosen one by one.
Regards, CVH
|
|
784 | QCAD (main) | Feature Request | Low | Turn text into hatched polylines | Assigned | |
1 |
Task Description
Would it be possible to add a feature which turns selected text into solid fill hatched polylines?
That would make it possible to migrate the drawing from one computer system to another without having to worry whether the used font is installed on both systems, like when sending a drawing to a manufacturer for laser engraving.
Right now I can do it by hand, letter by letter, and that is a rather labour-intensive task.
|
|
779 | QCAD (main) | Feature Request | Low | Turning detailed view on/off | Assigned | |
1 |
Task Description
My system: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz and 8 GB of RAM and NVIDIA GT218 (GeForce 210)
For a normal drawing displaying it in all detail is a good thing and the performance of my quad-core system is more than adequate.
But I discovered (or rather experienced) that when putting a large collection of individual drawings of gears onto one big sheet (960 mm x 600 mm - preparation for laser cutting), the performance was so bad that I had to wait several seconds (>10 sec) for each step in the process of arranging all the parts on the layer.
Request: It would be a big help and performance booster if you could disable the detailed view of each part/layer and only draw a rectangle to visualize the outline of the part.
Please take this in consideration. Attached you find an example of how that could look like. (Actually when pasting a drawing from the clipboard you already do that.)
|
|
821 | QCAD (main) | Feature Request | Low | Underline text option | Assigned | |
|
Task Description
Feature request - to have an option to underline text.
|
|
1719 | QCAD (main) | Bug Report | Very Low | Undo on converted drawing leads to wrong label position... | Assigned | |
|
Task Description
Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.
|
|
2271 | QCAD (main) | Bug Report | Low | Unpredictable Crashing on Mac M1 Arm64 | Assigned | |
|
Task Description
I am getting random crashing on my MacBook M1 chipset while using QCAD Pro. There is nothing in particular that you can do to replicate as the crashing is completely inconsistent. Have had it crash when pressing escape while using measurement tool, but have also had it crash while using the app and selecting a tool.
Included crash report, which has also been sent to Apple.
Thanks
|
|
2162 | QCAD (main) | Suggestion | Low | Update the parameter with simplify of RPolylineData & R... | Assigned | |
1 |
Task Description
Unrelated to OS, nor version
Reported Jun 23, 2020 in: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372
Status Dec 24, 2020: https://qcad.org/rsforum/viewtopic.php?f=30&t=7372#p30955 Documentation is updated. The Classes still refer to an ‘angleTolerance’.
Regards, CVH
|
|
1131 | QCAD (main) | Feature Request | Low | Use different units for construction and dimensions | Assigned | |
2 |
Task Description
E.g. use Millimeters for construction while dimensions are displayed in Meters.
|
|
827 | QCAD (main) | Feature Request | Low | Use Properties Editor to define Properties of newly cre... | Assigned | |
|
Task Description
If there is no selection the Properties Editor could be used to predefine the properties of to be drawn elements.
|
|
724 | QCAD (main) | Feature Request | Low | Useless reference point entering when moving relatively | Assigned | |
1 |
Task Description
Hi, this is a usability feature request:
If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.
It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).
Thx
|
|
694 | QCAD (main) | Feature Request | Low | User coordinate systems (UCS) | Assigned | |
13 |
Task Description
UCS support.
|
|
618 | QCAD (main) | Feature Request | Low | user defined lineweight | Assigned | |
2 |
Task Description
To have the option to set your own ‘user defined’ line weight.
|
|
802 | QCAD (main) | Feature Request | Low | User defined toolbar | Assigned | |
|
Task Description
It would be a nice feature to be able to define your own toolbar.
See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2393
|
|
721 | QCAD (main) | Bug Report | Low | Vertical dimensions imported as horizontal dimensions | Assigned | |
|
Task Description
Vertical dimensions created with 3rd party applications are sometimes imported as horizontal dimensions with length 0. Changing the angle in the property editor fixes the problem. Problem occurs in QCAD 2.2 and QCAD 3.0.
|
|
2289 | QCAD (main) | Bug Report | Low | Vertical Line Tool stops accepting input | Assigned | |
|
Task Description
When using the vertical line tool, you can enter a length value in the options toolbar, then place the line. If you want to change the length, you just need to enter a new value and the length field will update. However, there seem to be cases where after 10-20 entries, the focus goes off the length field in the options toolbar, requiring the user to bring focus back to continue. I could not seem to duplicate this behavior with the horizontal line tool.
|
|
2189 | QCAD (main) | Feature Request | Low | Vertically and/or diagonally stacked fractions option. | Assigned | |
2 |
Task Description
The option for vertically and diagonally stacked fractions would be helpful for both the text creation tool and as the output of dimensions.
|
|
705 | QCAD (main) | Bug Report | Low | Verwaltung Library Resourcen und Favoriten .... | Assigned | |
|
Task Description
Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....
Hier meine Gedanken ....
In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.
Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.
Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.
Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!
OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”: QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!
Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.
|
|
2097 | QCAD (main) | Bug Report | Very Low | Very hard to snap to baseline reference point of dimens... | Assigned | |
|
Task Description
With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension. I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.
|
|
1133 | QCAD (main) | Feature Request | Low | View > Add View: save layer state | Assigned | |
1 |
Task Description
Save layer state (visibility) with each added view object (optional?).
|
|
1905 | QCAD (main) | Bug Report | Very Low | View > Property Editor: Changing attribute of block cha... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947
|
|
1596 | QCAD (main) | Feature Request | Low | View > Selection Filter: add filter for custom properti... | Assigned | |
3 |
Task Description
See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=4840
|
|
1443 | QCAD (main) | Bug Report | Very Low | View > Status Bar remains unchecked | Assigned | |
1 |
Task Description
Status Bar menu remains unchecked even it is toggled on or off
|
|
1541 | QCAD (main) | Feature Request | Low | View > Zoom > Zoom In/Out: Make zoom factor configurabl... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729
|
|
1915 | QCAD (main) | Suggestion | Low | Viewport does not rotate view-port when changed in pape... | Assigned | |
|
Task Description
To reproduce
1. Select a new view-port in model-space 2. Select the appropriate paper-space 3. When the paper space opens change the angle of the viewport.
Actual
The object in the viewport changes but the viewport itself remains unchanged
Expected
That both the view-port and the object changes angle as the angle is updated
Motivation
If you abort the placement (but keep the angle) and go back to model-space and then redo the operation the view-port is rotated along the angle. It seems that the viewport only picks up the initial angle once the paper-space is open and ignores any changes thereafter
Workaround
1. Select the view-port per normal in model-space 2. Open the paper-space and set the wanted angle but do not place the view-port in paper space 3. Abort the placement on paper-space and redo the whole operation
Once the paper space is opened again the view-port will have the chosen angle
|
|
2308 | QCAD (main) | Feature Request | Low | Viewport Scale Field | Assigned | |
|
Task Description
It would be helpful if the scale field that appears while placing a viewport would also re-appear when the viewport is selected after it’s already been placed in the layout. It would also be helpful if the pre-populated values in the dropdown matched those in the global layout scale field.
|
|
1999 | QCAD (main) | Feature Request | Low | Viewport: Add additional properties for controlling dim... | Assigned | |
3 |
Task Description
When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:
1) E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed. This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.
2) Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.
The Viewport properties: https://i.imgur.com/s07JtaB.png
|
|
637 | QCAD (main) | Feature Request | Low | Viewports / View List | Assigned | |
|
Task Description
1. The Scrollbars for each window in the Viewports has the same size like the normal used scrollbars for windows. If you are working on a normal size Monitor it “steals” a lot of “working space”. Is there any possibility to make the scrollbars smaller or just a line to separate the windows so that I have to navigate with Keyboard and mouse?
2. I thing the Viewports and the View List belongs together - is it possible to get a button in the “View List / Tool Bar” to choose a Viewport style instead of “walking” the long way over the “Drawing preferences” Menu?
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=2071
|
|
2538 | QCAD (main) | Bug Report | Very Low | Weight 2.11 French translation typo | Assigned | |
1 |
Task Description
Andrew,
When switched to French I detected a typo in the drop down box for Lineweight.
Weight 2.11mm is listed as 1.58mm {2.11m?} https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts#L1228-L1229 Also see attached image file.
May I ask why only ISO types have a comma instead of a point in French. The use of a comma is uncommon in the Property Editor even when that is the native decimal separator. I also detect an extra space between the value and ‘mm’ and that only for the ISO types.
This only occurs in: https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pl.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pt.ts
Probably not OS or QCAD version related.
Regards, CVH
|
|
1754 | QCAD (main) | Suggestion | Low | When Selecting multiple blocks that contain the same at... | Assigned | |
|
Task Description
When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.
|
|
2552 | QCAD (main) | Bug Report | Low | Windows shortcut Alt + Underlined Key fails partly in m... | Assigned | |
|
Task Description
Reason: Same underlined keys are used for different menus
Select and Snap = S, Dimension and Info = I, Modify and Misc = M,
|
|
1811 | QCAD (main) | Feature Request | Low | Zoom 1:1 | Assigned | |
2 |
Task Description
It would be nice to be able to adjust the zoom factor so that the scale on the screen matches a ruler which I lay on the screen.
Thanks!
|
|
2284 | QCAD (main) | Bug Report | Low | Zooming in & out causes grid/snap scale value change in... | Assigned | |
1 |
Task Description
I have set the grid/snap value to X=.0625 Y=.0625 on all 4 viewports. When zooming in and out the grid/snap scale changes from .0625 to 3.90625. at this point the grid/snap points differ, This causes a variation in the grid/snap reference points lending to drawing errors.
example When I use the grid settings defaults .01, when zooming in and out, the grid/snap scaling doesn’t seem to have this issue. Other values do, See below.
set value first zoom second zoom next zoom
point point point ...
0.01 0.1 1.0 10.0 ... 0.02 0.04 0.4 4.0 ... 0.04 0.16 1.6 16.0 ... 0.05 0.25 2.5 25.0 ... 0.0625 0.390625 3.90625 39.0625 ... 0.0254 0.64516 6.4516 64.516 ...
Why is there a squaring of the original set value? Which then becomes a new zoomed grid/snap value?
QCAD Professional Version: 3.26.4.0 (3.26.4) Internet: QCAD.org Build Date: Jun 3 2021 Revision: 0bb4334 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
|
|
2315 | QCAD Community Edition | Bug Report | Low | Crash after ~10-th times move Spline nodes | Assigned | |
|
Task Description
1. Create spline 2. Move spline nodes. After ~10 times move qcad is crashed with backtrace: Thread 9 “Thread (pooled)” received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fff56dc9640 (LWP 8224)] 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848) at /usr/include/qt5/QtCore/qlist.h:492 492 current→v = new T(*reinterpret_cast<T*>(src→v)); (gdb) bt #0 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848)
at /usr/include/qt5/QtCore/qlist.h:492
#1 QList<QSharedPointer<RShape> >::detach_helper (alloc=<optimized out>, this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:835 #2 QList<QSharedPointer<RShape> >::detach_helper (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:849 #3 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #4 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #5 0x00007ffff686182a in QList<QSharedPointer<RShape> >::end (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/qlist.h:342 #6 QList<QSharedPointer<RShape> >::last (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:364 #7 RSpline::appendToExploded (this=0×555557311510, line=...) at math/RSpline.cpp:964 #8 0x00007ffff6867059 in RSpline::getExploded (this=0×555557311510, segments=1457293328) at math/RSpline.cpp:919 #9 0x00007ffff686682a in RSpline::getLength (this=this@entry=0×555557311510) at math/RSpline.cpp:1026 #10 0x00007ffff6c11490 in RSplineData::getLength (this=<optimized out>, this=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineData.h:178 #11 RSplineEntity::getProperty (this=0x5555573114a0, propertyTypeId=..., humanReadable=<optimized out>, noAttributes=<optimized out>,
showOnRequest=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineEntity.cpp:253
#12 0x00007ffff67cc214 in RPropertyEditor::computePropertyValue (ccProp=...) at /usr/src/debug/qcad-3.27.0.0/src/core/RPropertyEditor.cpp:574 #13 0x00007ffff67d298f in QtConcurrent::FunctionWrapper1<void, RProperty&>::operator() (u=..., this=0x555557757f18)
at /usr/include/qt5/QtConcurrent/qtconcurrentfunctionwrappers.h:80
#14 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIteration (it=..., this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:68
#15 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIterations (this=0x555557757ee0,
sequenceBeginIterator=..., beginIndex=<optimized out>, endIndex=15) at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:77
#16 0x00007ffff67d2c9d in QtConcurrent::IterateKernel<QList<RProperty>::iterator, void>::forThreadFunction (this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentiteratekernel.h:255
#17 0x00007ffff44b5b2d in QtConcurrent::ThreadEngineBase::run (this=0x555557757f20) at qtconcurrentthreadengine.cpp:302 #18 0x00007ffff59c8d52 in QThreadPoolThread::run (this=0x555556198b10) at thread/qthreadpool.cpp:100 #19 0x00007ffff59c5a61 in QThreadPrivate::start (arg=0x555556198b10) at thread/qthread_unix.cpp:329 #20 0x00007ffff546c717 in start_thread (arg=<optimized out>) at pthread_create.c:435 #21 0x00007ffff54f018c in clone3 () from /lib64/libc.so.6 (
|
|
2405 | QCAD Community Edition | Bug Report | Low | Dimension scaling not working | Assigned | |
|
Task Description
I’m using QCAD Community Edition 3.27.7 on Windows 11.
When I started my drawing, I was able to change the size scale factor of (existing) dimensions using “Edit/Drawing Preferences/Dimension/Dimension Settings/Size scale factor”. However, suddenly this feature stopped working and now I cannot switch the dimension scale factor any longer.
I used this feature to be able to adapt the scale factor of the dimensions when printing in different scales. I.e. all my drawings are in “original” size but when it comes to printing, I print some parts in scale 1:2 (in which case I used to set the size scale factor of the dimensions to 2) and some parts in scale 1:10 (in which case I used to set the scale factor of the dimensions to 10). Using this procedure, the dimensions have the same size (font size, arrow size, gaps etc.) on both drawings.
I have attached the drawing, that shows the described issues.
|
|
2391 | QCAD Community Edition | Bug Report | Low | Fix Dark Theme for Linux | Assigned | |
|
Task Description
The dark theme for Linux is broken:
- Some icons have dark background (expected) and black foreground color (that should be replaced by white of very light gray) - Some icons have light background (not cohesive with the theme). - The command history shows dark blue font on dark gray background. - The grid’s ruler shows black font over dark background for the numbers. - The icons folder is missing in the GitHub repository, but other themes have that folder. - The general icons (open, save, and so on) are not dark theme friendly. A better approach for maybe all the themes would be to use something like the breeze icons pack for LibreOffice, and it will have the added benefit of making the app look more modern.
The icons issue is the biggest problem. They should probably replace the black color for white or very light gray. Even the red accent color is not ideal for dark themes, is not the main issue.
Attached is an image that show the problems and another that shows LibreOffice with the Dark Breeze theme for reference.
|
|
2386 | QCAD Community Edition | Bug Report | Low | Label "Linear format" missing in Property Editor | Assigned | |
|
Task Description
no task description |
|
2068 | QCAD Community Edition | Bug Report | Very Low | Non-english text in upper/lower index becomes UTF code | Assigned | |
|
Task Description
How to reproduce.
1. Create a text field with some non-english words in the upper index. (see attached pic1.png) 2. Save the project and close QCAD. 3. Run QCAD and open same project. 4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)
Tried different fonts - doesn’t help.
Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux CentOS Linux release 7.7.1908 (Core)
|
|
2011 | QCAD Community Edition | Suggestion | Very Low | Update QCAD CE SpatialIndex module to latest version | Assigned | |
|
Task Description
Building with the bundled version, 1.8.5, works fine.
When I try to build using the system version, which for Mageia Cauldron is 1.9.3, the build fails.
https://raw.githubusercontent.com/kekePower/mmbl/master/qcad/2019/12/11/20%3A13%3A48/log.qcad
Here is the current spec file for version 3.23.0.4. https://svnweb.mageia.org/packages/cauldron/qcad/current/SPECS/qcad.spec?revision=1465894&view=markup
It looks like qcad is incompatible with versions above 1.8.5.
Are there plans to port to the new version?
Thanks in advance.
|
|
1913 | QCAD/CAM | Bug Report | Low | 3D Simulation Behaves odd | Assigned | |
|
Task Description
Hallo Andrew,
testing the drill toolpath I used single point markers.
In 3D simulation the tool drills the toolpath AND uses the drill as a mill.
Cam Export and generated G-code is not effected.
|
|
2164 | QCAD/CAM | Feature Request | Low | Add ability to pan the 3D view with a modifier key and ... | Assigned | |
2 |
Task Description
With a Mac (and no external mouse) there’s no middle button so it’s not possible to pan the 3D view (that’s what they tell me in the forum). It would be useful if one could use command-drag or control-drag to pan around the 3D view.
|
|
1815 | QCAD/CAM | Feature Request | Low | Add Laser tool option | Assigned | |
|
Task Description
Hi Andrew,
Creating G-code for cnc-laser, the laser-tool can not be correctly set at all.
Attached a laser tool proposal
|
|
2374 | QCAD/CAM | Feature Request | Low | Add Spindle Speed to Toolpath Dialog | Assigned | |
1 |
Task Description
When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.
Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.
Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?
Many thanks’, and best regards.
|
|
2507 | QCAD/CAM | Feature Request | Low | Add Toolpath from Layer | Assigned | |
1 |
Task Description
I’ve been able to make this work as proof of concept very easily, but many of the functions are inaccessible/difficult to override from post-processors.
Desired functionality:
1) Enable “Add Profile Toolpath” UI elements all the time (remove setRequiresSelection) 2) CAM Profile Toolpath Dialog: Drop-down menu of available Layers. First option “By Selection Only” 3) “By Selection Only” continues to pass EntityIds of selected objects (existing functionality) 4) Choosing an active Layer will use the Layer as source of EntityIds 5) Any changes to Entities on a Layer will result in those new/removed/changed objects being re-generated without having to manually select and update the tool paths. Either do not recover list of EntityIds from the ToolpathBlock, and instead use “live” each time it’s regenerated, or additional functionality to determine if a LayerId is associated with the Toolpath, and then lookup EntityIds.
I assume the persistence of the Layer selection would be available within the Toolpath, so that it will automatically update EntityIds every time a Toolpath is regenerated, without having to select Entities and updating the toolpath manually.
For large projects, being able to force select objects based upon layer dramatically reduces mistakes and speeds up the workflow.
Thanks
|
|
2213 | QCAD/CAM | Feature Request | Low | Allow editing Spindle Speed separately for each Toolpat... | Assigned | |
1 |
Task Description
Hello dear CAM developers!
I need to use the same tool at different spindle speed in a single machining file. I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)
FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal. I need to be able to do both engraving and cutting in a single file. Alas! this laser tool is defined with a fix and unique number (99). Therefore I cannot define different laser tools with different speeds.
Many thanks Best regards.
|
|
1847 | QCAD/CAM | Bug Report | Low | BUG MEMORY | Assigned | |
|
Task Description
Hi Andrew,
Still working on creating HPGL.PLT toolpaths for the HP7580 pen plotter. QCAD has some trouble creating toolpaths. Too often it shuts itself down, or the PC gets stalled.
Recreating the same error however is possible
|