QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
2056QCAD (main)Feature RequestLowOption Duplicate layer (yy) inclusive all sub-layers.Assigned
0%
Task Description

If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done.
Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.

Current lack:
Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.

With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ... :-(

675QCAD (main)Feature RequestLowOption for fixed Text and Dimension heights ...Assigned
0%
Task Description

I think it would be nice to have the possibility to decide a fixed Text and Dimension (inclusive Arrows) height what is not affected by the Print scale. That means: If I have a given height of 3,5mm it will always be printed with 3,5mm - no matter what the scale for the printing is.
Yes, I see also the problem that I could run in space problems after I twitch to the Print preview - but that will also happen when I change the Text hight in the preferences for a 5:1 printing.
Maybe this Feature Request doesn’t looks important if you are usually working with Metric Units but if you have to handle Imperial Units then it is a pain in the back to make always the calculation to get the same heights.
Try it by your self; 3,5mm = 0.137795” = 1”:1” Now I like to print it in 1”:256” ops - to small - ok 1”:64” ... no, to big, maybe 1”:128” .......and QCad can’t remember the previously numbers. ;-)

1632QCAD (main)Feature RequestLowOption to add bespoke dimension precision + tolerance s...Assigned
0%
Task Description

Hi Andrew,

1. I cannot find a way of selecting individual dimensions and changing the precision lets say from 0.00 to 0.000 for these particular dimensions only without affecting all the rest of the dimensions in the drawing - could an option be added for doing this in the property editor or not?

2. Would it be possible to add an option in the drawing preferences so that automatically a symbol is added at the correct placement fo all dimensions, in this case a tolerance plus/minus symbol?

Many thanks

Clive

1722QCAD (main)Feature RequestLowOption to insert viewport at either of the rectangle co...Assigned
0%
Task Description

Hi Andrew,

Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.

Hope that makes sense.

Many thanks

Clive

1731QCAD (main)Feature RequestLowOption to place text to other sideAssigned
0%
Task Description

Hi Andrew,

It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(

Many thanks

C;live

868QCAD (main)Feature RequestLowOption to save to dwt - drawing template.Assigned
0%
Task Description

An option to save to dwt (drawing template) would be so very useful.
Please see related topic:

http://www.qcad.org/rsforum/viewtopic.php?f=32&p=8237#p8237

1111QCAD (main)Feature RequestLowOption to swap right/middle mouse buttonAssigned
0%
Task Description

Most of the other slightly non-standard CAD/eCAD tools I work with (e.g. Diptrace, PTC Creo Elements) use the right mouse button to drag.
So when changing between these applications, it’s slightly confusing/annoying that I need the middle mouse button to drag in QCad.
Even worse, the middle mouse button on most mice is the scroll wheel which is not really comfortable to hold while dragging.

So I’d propose an option to switch the function of the middle and right mouse button to allow users to choose the preferable option.

2034QCAD (main)Feature RequestLowPaint Properties to include modifying linetype scales w...Assigned
0%
Task Description

Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result.
QCAD Pro 3.24 Windows10.

1046QCAD (main)Feature RequestLowPlease add script bindings for Qt 4.8.6 and 5.2.1Assigned
0%
Task Description

These are the versions Ubuntu 14.04 comes with, and since it’s an LTS version, it will linger around a while.

(Despite the fact that the Qt4 packages are versioned 4.8.5, qmake –version says 4.8.6, so it doesn’t find the 4.8.5 bindings.)

Thanks,

1823dwg2pdfFeature RequestLowplotting error to pdf a Dwg where the view port is not ...Assigned
0%
Task Description

When trying to plot a dwg or a dxf to pdf where the viewport is orientated to a different angle than north up
the data in the view port is plotted north up.
see attached DWG and pdf for clarification.

2457QCAD (main)Bug ReportLowPolyline start / end widths not saved for first segmentAssigned
0%
Task Description
  1. Draw a polyline with a single segment
  2. Set the start and end width of the first vertice / segment (index 0)
  3. Save
  4. Reload
1890QCAD (main)Feature RequestLowPossibility to address an QCAD extern font folderAssigned
0%
Task Description

Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD. :-)

The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.

665QCAD (main)Bug ReportLowPossible printing error on Linux fedora 16?Assigned
0%
Task Description

On behalf of et76
Possible printing error using Linux 16 - needs further testing!
Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

Au nom de et76
Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests!
S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119

1877QCAD/CAMFeature RequestLowPost Processor TutorialAssigned
0%
Task Description

Hallo Andrew,

I am still busy on the never ending G-code story. Doing so I wrote a small Post Processor Tutorial for all those nerds who wants to write their own. If you like it you might add it to QCAD. However, since English is not my native tongue I suggest checking it would be wise.

Meanwhile I have downloaded the source code, and could not find the CAM’s Drill-path-script. I am now using a negative Drill Cut Depth to set a Laser Dwell time, were as a field “Dwell Time (in seconds)” in the Drill-path would be more appropiate. Is this script open source available or is it part of ‘closed part’ of QCAD?

729QCAD (main)Bug ReportLowPreferences not stored on some installationsAssigned
0%
Task Description

Preferences not stored on some installations

See:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&view=unread#unread

1678QCAD (main)SuggestionLowProperty Editor dialogAssigned
0%
Task Description

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239

2229QCAD (main)Feature RequestLowProperty Editor, option format property values as decim...Assigned
0%
Task Description

Angle Display is decimal although the decimal display is disabled in Application Preferences.

Format should be 17° 31’ 52” instead of 17.531111.

1827QCAD (main)Feature RequestLowProperty Editor: Accept advanced scale expressions for ...Assigned
0%
Task Description

Hi,

Identical scale expression used in Print Preview like 5:1, 5/1, 5”=1”, 5 are working flawless like expected.
Same expression used in a Viewport scale leads to different outcomes.

The Property Editor used to fix that in Paper_Space does also not accept those standard expressions.

514QCAD (main)Feature RequestLowPunktpestimmung Intersection manual muss immer wieder n...Assigned
0%
Task Description

Beispiel:
Zeichnen einer Linie (Line two points) mit Punktbestimmung.
Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut ;-)

Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht :-(

2500QCAD (main)Bug ReportLowQcad 3.28.2 alters color of adjacent text, if certain u...Assigned
0%
Task Description

Qcad alters color of adjacent text, if certain unicode characters are used.

Version:
3.28.2.0 (3.28.2)
Internet:
QCAD.org
Build Date:
Aug 30 2023
Revision:
a8039fc
Qt Version:
5.13.2
Architecture:
x86_64
Compiler:
MSVC++ 14.0 (2015)

Flytracker appears to have the same problem, as this report was rejected when I inserted the same characters into the title. Query {SELECT tag_id FROM `flyspray_list_tag` WHERE (project_id=0 OR project_id=?) AND tag_name LIKE ? ORDER BY project_id} with params {1,} Failed! (Illegal mix of collations (utf8_unicode_ci,IMPLICIT) and (utf8mb4_general_ci,COERCIBLE) for operation ‘like’)

2261QCAD (main)SuggestionVery LowQCAD change freehand tool to freehand spline toolAssigned
0%
Task Description

no task description

733QCAD (main)Bug ReportLowQCAD Trial: batch tool dwg2bmp produces no outputAssigned
0%
Task Description

Some users are experiencing problems with dwg2bmp.

See forum at:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2272&view=unread#unread

1841QCAD/CAMFeature RequestLowQCAD/CAM Postprocessor "Hpgl": Add pen colors to HP/GL ...Assigned
0%
Task Description

Add SPx; with x being pen number from 1-8.

TODO:
- Which color corresponds to which pen number?
- What if there are more than 8 colors in a DXF files?

355QCAD (main)Feature RequestLowRemember function for dimension OptionAssigned
0%
Task Description

I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.

Why Remember Function:
If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.

1900QCAD (main)Bug ReportVery LowRemote shares initially not accessible.Assigned
0%
Task Description

My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.

While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.

Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.

Drag and Drop from a remote share will never work.

1954QCAD/CAMReleaseLowRevised PWM Post ProcessorAssigned
0%
Task Description

Hallo Andrew,

I have revised the PWM Post Processor to Revision D.

783QCAD (main)Feature RequestLowSave as .dgn option missing in 3.0.8?Assigned
0%
Task Description

Not really a bug I suppose but the save as.dgn file format is missing in snapshot 3.0.8 release.

Will this be available again soon?

700QCAD (main)Bug ReportLowSaved 'hatched' block loses hatching when using isometr...Assigned
0%
Task Description

Hatched block loses hatching when using isometric projection tool:
See -http://www.qcad.org/rsforum/viewtopic.php?f=32&p=7063#p7063

When manipulating a saved hatched block with the isometric tool it loses the hatching unless the block is exploded.

Is this normal behaviour here? or a bug?

1026QCAD (main)Feature RequestLowSelection Filter also present in the Menu "Selection"Assigned
0%
Task Description

It would be nice to have the Selection Filter also present in the Menu / Selection List

523QCAD (main)Bug ReportLowSelection tool button in CAD tool bar shows line tools ...Assigned
0%
Task Description

The selection tool is not accessible:

Click on Selection Tool icon - left panel:

Left panel then shows line tool options.

Click “back” button at top of left panel:

Left panel then shows selection options.

Click an option icon:

Left panel then shows line tool options again.

992QCAD (main)Feature RequestLowselections to stay selected when projecting to an isome...Assigned
0%
Task Description

My request is that all selected entities stay selected after isometric projection, this would be useful for example if you need to modify the projection further after placing!
Maybe an extra button could be added in the ISO options?

1549QCAD (main)Feature RequestLowSeparate Coordinate Display from Drawing DimensionsAssigned
0%
Task Description

Source:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4752

According to the changelog for version 3.9.3 the info tools and coordinate display are tied to the current drawing dimensions. For much of my use I prefer to have the dimensions format different. The main reason is that my customers want to see the format in fractions, but when I am drawing I’d rather see the decimal format to make sure what I am drawing is accurate. So I’d really be interested in seeing a separate full configuration of the display and info coordinates.

564QCAD (main)Feature RequestLowSettings organisation in levelAssigned
0%
Task Description

As an old professional “documentation writer and user inteface designer” but IMHO, I’m not convinced that the “Application preferences” are correctly organised for ease of understanding and using them.
These settings are organised in 2 levels. Some of the first levels have their own settings (e.g. “Graphics view”) while most others don’t (e.g. “Load/save”). May I humbly ;-) suggest some consistency rules :
- no sub-level if there is only one subject
- no items on main level if there are already 1 or more sub-level(s).
For instance :
- sub-level “Default Dimension settings” under “Dimension” is the only sub-level : then move these items under main level “Dimension” and suppress the sub-level ;
- the items under “Graphics view” main level (with several sub-levels)could be in a sub-level named “General” ;
Actually, “Graphics view” main level is the only one which has both its own items and sub-levels ;-))) ?

817QCAD (main)Feature RequestLowSnap and cut all intersection in a given area tool ...Assigned
0%
Task Description

As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch.
To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries.
The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....

Clive mentioned on this:
Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.

736QCAD (main)Bug ReportLowsnap tool menu is shown before specifiv tool menuAssigned
0%
Task Description

When creating a new file, selecting the e. g. line tool at first opens the linemenu and the snap tool menu as expected. After clicking on the back button twice (going back to the main menu) and selecting the e. g. circle menu, the snap tool menu is shown instead of the circle menu. Instead the circle menu is shown after pressing the back button again.

This only happens when clicking on the back button, but with any tool menu seleected. Pressing escape to go back does not show this problem.

QCAD is running on Mac OS Mountain Lion.

1034QCAD (main)Feature RequestLowSupplementary note added to Application preferences dia...Assigned
0%
Task Description

I think it would be useful to add a note to the Application preferences dialog window, to explain to the user the difference between ‘Application and Drawing’ preferences and how it effects drawings in QCAD.

Please see topic for more details and feedback:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2831&p=9724#p9724

2037QCAD (main)Feature RequestLowSupport alternative angle referenceAssigned
0%
Task Description

E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.

1098QCAD (main)Feature RequestLowSupport for set of layersAssigned
0%
Task Description

Many constructions refer to a basis of elements, which stay constant in all follow-ups. As an example there is a floorplan and I would like to create different variations of room layout (e.g. A and B). In my example the basis consists of 30 layers an each variation needs 10 further ones. At last there are 50 different layers in my drawing. Designing layout A needs layer 1 to 30 (basis) and 31 to 40 (A) to be shown, but 41 to 50 (B) must be invisible. Now I modify Var.B which makes me to single click the visibility of 31 to 40 (A) to be not shown and 41 to 50 (B) to be shown. You’ve got it?

It would be great help, to save the set of all shown layers by an individual name in a pulldown-menu. Visibility of my variations could be chosen by userdefined “set of layers”, e.g. “Var-A”, “Var-B” and “Var-A_but_different”. In this way I pick just one set-name in my pulldown-list instead of marking and demarking between countless layers.

In my opinion this tool would be a small aspect in QCad but a giant leap for user-pleasentness ;-)

2272QCAD (main)Feature RequestLowSupport unit "US survey foot"Assigned
0%
Task Description

In the US, it is (unfortunately) still common to use US survey foot. It seems at least some DXF applications/libraries support this unit as a $INSUNITS value, some references:

There are two issues regarding this with QCAD:

  1. If you open a document with $INSUNITS being 21, it’s reset to 0 (unitless/unspecified) when saved again, even when not changing anything.
  2. It is not possible to select these units in the GUI.

I don’t know about standardization of these values, but my hope is that it’s at least possible to preserve the unit in an existing drawing. Given that this unit is supposed to be obsolete in some years, it might seem less important, but due to this transition, it might get even more important to be able to distinguish between units. Thanks!

2533QCAD (main)Bug ReportLowSurveyor's units never seem to display when selected as...Assigned
0%
Task Description

I've tried several times to try to see what the "surveyor's units" option of the Angular Dimensions format in the UI preferences will display as, but all it ever seems to do is cause the angle measurement to become blank. No angles are displayed whenever this mode is selected.

Indeed, I cannot figure out what the setting actually does besides causing angles to never be displayed.

Is there a way to make this setting do something meaningful or is it just broken?

I found an old forum thread from 2016 about this same issue and it sounds like the same things is still happening since then.

I'm not a surveyor so I have no actual practical use for these units that I can yet see, but I just figured I'd add an report to the bug tracker here in case any developers aren't aware that the bug still seems to exist.

Does the setting do anything besides changing the displayed units in the status bar?

208QCAD (main)Feature RequestLowSVG export: support custom line weightsAssigned
0%
Task Description

Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594

1445QCAD (main)Bug ReportLowSwitching off grid scaling can break rulersAssigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4314

1233QCAD (main)Feature RequestLowTab key to cycle between selected objectsAssigned
0%
Task Description

I think it’s a useful adition and makes it easy to select objects that are overlapped. I know there is a selection filter, but sometimes this is faster and/or all the objects share the same type and such things.

If I remember correctly, Inkscape has this behaviour.

Thanks.

2331QCAD/CAMFeature RequestLowTabs: Control over on which particular profile used.Assigned
0%
Task Description

Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.

It would be nice to have some kind of control on which profile a tab has to be used.

2125QCAD (main)Bug ReportLowText disappears when you zoomWaiting on User
0%
Task Description

When I zoom, the text disappears in certain zoom levels after updating to the latest version.

2130QCAD (main)TaskLowText: Text dialog removes tabsAssigned
0%
Task Description

Text dialog (QTextEdit) strips tabs in toHtml.
If tabs can be retained, text entities could support tabs.

2536QCAD (main)SuggestionLowThe little circle that shows the error location when us...Assigned
0%
Task Description

I was having some problems getting some shapes to fill with a solid fill and was frustrated by the awkward numeric coordinate it was giving me for where the error (the disconnected shape points) were, until I fortunately noticed that a tiny pale circle appears around the point where the error is for about just 1 second.

This is a very helpful error indicator circle but is far too easy to miss.

Perhaps making it last longer (or letting the user control that) would be beneficial.

I also wonder if showing multiple such circles (when they exist, as they did in the piece I was working on) at the same time or having that as a UI option would be good.

Anyway, goodnight all!

674QCAD (main)Feature RequestLowTo add optional 'auto' dimension tracking feature.Assigned
0%
Task Description

It might be useful for some to have the option to turn on/off ' auto’ dimension tracking option.

See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=2&p=6893#p6893

1594QCAD (main)Feature RequestLowTool matrix: allow reordering of toolsAssigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923

1846QCAD/CAMFeature RequestLowToolpath preset offsetsAssigned
0%
Task Description

Hi Andrew

A request for adding some fields to the toolpath

Showing tasks 451 - 500 of 519 Page 10 of 11<<First - 7 - 8 - 9 - 10 - 11 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing