QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
2068QCAD Community EditionBug ReportVery LowNon-english text in upper/lower index becomes UTF codeAssigned
0%
Task Description

How to reproduce.

1. Create a text field with some non-english words in the upper index. (see attached pic1.png)
2. Save the project and close QCAD.
3. Run QCAD and open same project.
4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)

Tried different fonts - doesn’t help.

Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
CentOS Linux release 7.7.1908 (Core)

2088QCAD (main)Bug ReportVery Low column headers of the "General: tool settings " resize...Assigned
0%
Task Description

Open QCAD and the application preferences. In the section “General: tool settings " you can resize the columns: Menu, Shortcuts etc.
The problem is that it is not intuitive. The first divider is not selectable and the second moves the first, only backwards.

2097QCAD (main)Bug ReportVery LowVery hard to snap to baseline reference point of dimens...Assigned
0%
Task Description

With default autosnap settings reference points included I find it very hard to snap to the baseline reference points of a dimension.
I manage to do it by setting snap to reference point only and zoom out till I see the entire dimension element.

2098QCAD (main)Bug ReportVery LowOffset will pick up hidden blocks while using it in a l...Assigned
0%
1 Task Description

When I’m drawing inside a layout block the offset tool picks up lines from blocks that are hidden.
It is not happening with all the block.

2155QCAD (main)Bug ReportVery LowFaulty rendering Polyline Arcs with Width = 2RAssigned
0%
1 Task Description

QCAD Professional
Win installer 32bit
Version: 3.25.2.4 (3.25.2.4)
Internet: QCAD.org
Build Date: Nov 18 2020
Revision: 40f4475
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Most likely not related to the QCAD version, rather an old sore.

File included
Topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=7889#p30803
Confirmed by ‘cccplex’ Linux ‘Latest Ubuntu’

Polyline arcs with Width = 2R render as circle segments rather than circle sectors.
As Non-reversed arcs these don’t explode.
As reversed arc these explode to a single arc rather than a circle sector contour.

There is also still the faulty rendering with Z not zero
https://qcad.org/bugtracker/index.php?do=details&task_id=1923

Regards,
CVH

2176QCAD (main)Bug ReportVery LowModify > Break out Manual: relevance of order of click ...Assigned
0%
1 Task Description

QCAD Professional
Windows 7; Win installer 32 bit
Version: 3.25.2.7 (3.25.2.7)
Internet: QCAD.org
Build Date: Dec 16 2020
Revision: e06f230
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Forum Topic: https://qcad.org/rsforum/viewtopic.php?t=7988
File included.
I have no intention to make 48 separate reports.

CVH

2248QCAD (main)Bug ReportVery LowThemes: east and west dock widget tabs facing the wrong...Assigned
0%
1 Task Description

Hi Andrew

In QcadCAM when using the new Themes or User Created Themes the Layer and Block Tabs Appear to be reversed in East and West Positions.
I have discussed this with forum user PeteVick and he cannot reproduce this behavior in Qcad Pro... he suggested submitting this bug report.
I didn’t notice this until he pointed it out and don’t expect it to be high on your list of things to do..

Best Regards
John Hyslop
PS We are both using Linux Mint 20.1 (64bit) which is based on Ubuntu

2290QCAD (main)Bug ReportVery Lowloading the Drawing Preferences using enter, using ente...Assigned
0%
Task Description

I use CTRL + I to pull up drawing preferences. Upon changing the dimension settings quickly and closing it normally by pressing enter it closes. But if i go to the next tab (drawing tab) then press enter to load it up quickly instead of pressing CTRL + I. Upon changing the dimensions settings and pressing enter to close it, it won’t close but instead flash and i have to keep pressing enter and eventually it closes.

I think this is a bug.

I have the Pro Version

2302QCAD (main)Bug ReportVery Lowpolygon.getSelfIntersectionPoints(tol) returns 3th inva...Assigned
0%
1 Task Description

Windows 7 pro 32 bit msi-Installer
Version: 3.26.4.5 (3.26.4.5)
Internet: QCAD.org
Build Date: Jul 20 2021
Revision: e596276
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Andrew,

In the attached dxf:
Besides that it is clear that duplicate vectors are not filtered ...
Where a segment is crossing in another node a non valid node is returned as self-intersection point.
Seems to be unrelated to CW/CCW or tolerance.

Where 2 nodes coexists 4 duplicate vectors are returned.

Regards,
CVH

2328QCAD (main)Bug ReportVery Lowdrop down, using keyboardAssigned
0%
Task Description

Minor issue!
When using keyboard to initiate the dropdown menus.
I noticed the ALT “D” does not cycle through the headings Draw & Dimension in the same way.
ALT “M” cycles though Modify & Misc or ALT “S” cycles though Select & Snap.
User Name: StanTibbs
E-mail: [email protected]

2415QCAD (main)Bug ReportVery LowIssues with OffsetBothSidesAssigned
0%
1 Task Description

Andrew,

I can’t find any documentation concerning OffsetBothSides under Misc .. Modify.
It is not listed in the QCAD features nor in the changelog.

There was a Feature Request FS#1130 for this, I think you might want to close that as being implemented.

The tool asks for a Line, Arc, Circle, Ellipse, Spline or Polyline.
It also seems to act on shapes that can be exploded to such entities like Text, Dimension and Hatch entities.

There may be many ‘Result loop not closed’ or ‘No offsets possible’ warnings when hovering over entities on a drawing.
The preview may be partially, one or two sided and even two sided partially and closed with semi-circles.

I only successfully created a dual offset for open Splines, open or logically open Polylines.
All other attempts result in a single offset at the indicated side.

There are the usual exceptions for Polylines with arc-segments but that is related to small arc segments and being tangentially connected.
Only tested it on a Win7 platform.
I don’t suspect that version 3.27.8 includes a fix for that ... ;-)

Regards,
CVH

2440QCAD (main)Bug ReportVery LowHatch from Segments > False positives open loop warning...Assigned
0%
1 Task Description

Andrew,

Most probably not related to OS or QCAD version.

When hatching an area with Hatch from Segments (HS) there might be false positive warnings on open loops.
It seems that this is related to the orientation of the indicated segments and the order of selection.
The real problematic position is not always the first that is reported.
Loop count is increased even if it is a single loop.

Included a basic test drawing to replicate these.
Further details to replicate the issue are in the file.

Regards,
CVH

2461dxflibBug ReportVery LowASCII Control characters not handled correctly in Commu...Assigned
0%
Task Description

I see the following problem:
When I open a particular DXF file in the Professional Trial version 3.27.9.0 on macOS, “^I” in text fields is expanded to whitespace.
When I open the same DXF file in the Community Edition 3.27.9.0 on NetBSD/x86_64 (installed from pkgsrc), “^I” in text fields is visible as “^I”.

2494QCAD (main)Bug ReportVery LowInformation scrip on drawing screen unaligned.Waiting on User
0%
Task Description

Please view the attachment.

Regards

Graeme

2495ECMAScriptBug ReportVery LowRLine.isParallel(RLine) may return true for certain non...Assigned
0%
1 Task Description

Andrew,

It took me a while to find the source of a certain freak bug I encountered.
I used the RLine.isParallel(RLine) as a test for knowing if line segments were parallel or not.

Included below is script code that mimics the functionally of isParallel().

As far as I know isParallel() is nowhere used in the QCAD open source.
Textual only found in RLine.cpp & .h or under: opennurbs, ecmaapi\generated and ecmagenerator\src.

// Example:
// RShape1: RLine(RShape(address: "0xcd70e28"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(1010.000000, -140.000000, 0.000000, 1)")
// RShape2: RLine(RShape(address: "0x7659770"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(930.000000, -340.000000, 0.000000, 1)")
----
var aShape1Angle = shape1.getAngle();    // =0.6640461628266838 rad
var aShape2Angle = shape2.getAngle();    // =4.483157047107694 rad
----
// RLine::isParallel(RLine) -> aTest1 || aTest2
var aTest1 = RMath.isSameDirection(aShape1Angle, aShape2Angle);              // =false
var aTest2 = RMath.isSameDirection(aShape1Angle, aShape2Angle + Math.PI);    // =true
var aTestOr = aTest1 || aTest2;                                              // =>TRUE !?
----
// # BUG # RShape1 is considered as parallel with RShape2
----
// RMath::isSameDirection(dir1, dir2, tol) ... tol = RS.AngleTolerance = 1e-9
// for aTest1 -> ax1Test1 || ax1Test2
var ax1Dif = Math.abs(aShape1Angle - aShape2Angle);    // =3.8191108842810104 rad
var ax1Test1 = ax1Dif < 1e-9;                          // =false
var ax1Test2 = ax1Dif > 2*Math.PI - 1e-9;              // =false
var ax1TestOr = ax1Test1 || ax1Test2;                  // =>FALSE
----
// for aTest2 -> ax2Test1 || ax2Test2
var ax2Dif = Math.abs(aShape1Angle - (aShape2Angle + Math.PI));    // =6.9607035378708035 rad
var ax2Test1 = ax2Dif < 1e-9;                                      // =false
var ax2Test2 = ax2Dif > 2*Math.PI - 1e-9;                          // =true
var ax1TestOr = ax1Test1 || ax1Test2;                              // =>TRUE
----
// # BUG # The second test of the second isSameDirection() test returns true because ax2Dif is over 2pi

Regards,
CVH

2497QCAD (main)Bug ReportVery LowDraw > Circle > 3 Tangents (CT3) fails in some cases wi...Assigned
0%
1 Task Description

Andrew,

See attachment with example:

Solution included on layer ‘Solution’.

Regards,
CVH

2538QCAD (main)Bug ReportVery LowWeight 2.11 French translation typoAssigned
0%
1 Task Description

Andrew,

When switched to French I detected a typo in the drop down box for Lineweight.

Weight 2.11mm is listed as 1.58mm {2.11m?}
https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts#L1228-L1229
Also see attached image file.


May I ask why only ISO types have a comma instead of a point in French.
The use of a comma is uncommon in the Property Editor even when that is the native decimal separator.
I also detect an extra space between the value and ‘mm’ and that only for the ISO types.

This only occurs in:
https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pl.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pt.ts


Probably not OS or QCAD version related.

Regards,
CVH

2539QCAD (main)Bug ReportVery Low(Relative) Polar feet + surveyor notation fails.Assigned
0%
1 Task Description

Andrew,

A user essentially pointed out to an ACAD textbook example.
https://qcad.org/bugtracker/index.php?do=details&task_id=2533
Step 3 of: https://autodesk.blogs.com/between_the_lines/2012/07/drawing-with-surveyors-units-in-autocad.html

Please refer to this topic:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10652

Regards,
CVH

2547QCAD (main)Bug ReportVery LowBlock > Purge Unused Blocks > Removes _DatumFilled bloc...Assigned
0%
1 Task Description

Andrew,

The _DatumFilled Block used by Datum entities (DT) is considered as not used and is purged by Purge Unused Blocks (BP).
There is no block association for these special types of arrowheads in QCAD.

After purging the Datums are not immediately updated but the special arrowheads will eventually disappear. Adding new Datums will not fix that.

Not problematic because the _DatumFilled Block is re-created on save/reload when Datum entities exists. Datums are updated.

Probably not OS or version related.
Related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=10694

Best solution would be to support different types of arrowheads and all related:
https://qcad.org/bugtracker/index.php?do=details&task_id=695 https://qcad.org/bugtracker/index.php?do=details&task_id=757 https://qcad.org/bugtracker/index.php?do=details&task_id=1157

Regards,
CVH

Showing tasks 501 - 519 of 519 Page 11 of 11<<First - 7 - 8 - 9 - 10 - 11

Available keyboard shortcuts

Tasklist

Task Details

Task Editing