|
2411 | QCAD (main) | Feature Request | Low | Report hatching loop errors in the user defined coordin ... | Closed | |
1 |
Task Description
Andrew,
In “Loop not closed at point 120.079/259.997.” we can not use the coordinate as such. With my preferences I would need 120,079;259,997 as a valid coordinate to enter in the command line. I do this ‘translation’ in between in Notepad.
Not that personally my boundaries are frequently off
Reported by <OttoZ> in: https://www.qcad.org/rsforum/viewtopic.php?f=89&p=38836#p38829 ‘Die Koordinaten lassen sich nicht kopieren, sonst könnte man zur Fehlstelle springen.’
In all cases the “/” is not a valid Cartesian coordinate separator. The dot at the end of the sentence is also not so common in QCAD.
Regards, CVH
|
|
2410 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Graphics View > Fonts: ... | Closed | |
2 |
Task Description
Edit: And it fails often to read the menu at all at the first time. A second try will display the information ...
|
|
2409 | QCAD (main) | Bug Report | Low | Area measurement of hatches leads to a crash of QCAD | Closed | |
|
Task Description
Reported in the QCAD Forum by TSG on a macOS Catalina system. Details on this topic can be found at https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9603#p38738.
|
|
2408 | QCAD (main) | Bug Report | Low | Length of Hatch entity sums the length of the patterned ... | Closed | |
1 |
Task Description
Andrew,
When selecting a Hatch entity: For a solid filled Hatch the boundaries total length is given. With a pattern that returns the summed length of the patterned lines.
I think that the recent performance update for RHatchData::getLength returns something different than intended.
Regards, CVH
|
|
2407 | QCAD (main) | Bug Report | Low | App stalling for Trace Bitmap with no image in selectio ... | Closed | |
|
Task Description
Andrew,
Trace Bitmap requires a selection. QCAD stalls when the first entity id is not an RImageEntity .
The prevImageEntity.getFileName() in the beginEvent will throw an exception for all but an RImageEntity.
The odds are against us that in a multiple selection an image is the first id.
I think you need to filter on image entities like later in the applyOperation function.
Regards, CVH
|
|
2406 | QCAD (main) | Bug Report | Low | File > SVG Export: wrong arcs in blocks with negative s ... | Closed | |
1 |
Task Description
When using SVG export on a drawing with a block defined, the export is incorrect. Arcs are drawn incorrectly and parts of the block are missing. If that block is exploded, the SVG export is correct. Attached is a block on the lower left and the same block on the lower right after explode. Also attached is the resulting SVG file. This is not always the case. Some blocks are correctly exported to SVG. The upper row is again a block on the left and the same block exploded on the right. It exports properly.
|
|
2405 | QCAD Community Edition | Bug Report | Low | Dimension scaling not working | Assigned | |
|
Task Description
I’m using QCAD Community Edition 3.27.7 on Windows 11.
When I started my drawing, I was able to change the size scale factor of (existing) dimensions using “Edit/Drawing Preferences/Dimension/Dimension Settings/Size scale factor”. However, suddenly this feature stopped working and now I cannot switch the dimension scale factor any longer.
I used this feature to be able to adapt the scale factor of the dimensions when printing in different scales. I.e. all my drawings are in “original” size but when it comes to printing, I print some parts in scale 1:2 (in which case I used to set the size scale factor of the dimensions to 2) and some parts in scale 1:10 (in which case I used to set the scale factor of the dimensions to 10). Using this procedure, the dimensions have the same size (font size, arrow size, gaps etc.) on both drawings.
I have attached the drawing, that shows the described issues.
|
|
2404 | QCAD (main) | Performance Issue | Low | Extreme Lag When Selecting Solid or Pattern Hatch | Closed | |
|
Task Description
Hi Andrew
I get Extreme Lag When Left Click and Selecting Solid or Pattern Hatch...
Please See Thread in Forum... https://qcad.org/rsforum/viewtopic.php?f=33&t=9588&p=38670#p38670
Screenshot & DXF Attached for your convenience ..
Version: 3.27.7.0 (3.27.7) Build Date: Sep 30 2022 Revision: 62d387f Qt Version: 5.14.2 Architecture: x86_64 Compiler: gcc 5.4.0
Cheers John
|
|
2403 | QCAD (main) | Bug Report | Low | Print Preview Page Not The Same As Output | Closed | |
|
Task Description
Hi Andrew
When I Print or save as PDF the paper settings don’t seem to be working.... The output file does not match..
See Forum Post https://qcad.org/rsforum/viewtopic.php?f=33&t=9587&p=38662#p38662
Cheers John
|
|
2402 | QCAD (main) | Bug Report | Low | Selection Filter fails for different filter scenarios. | Closed | |
|
Task Description
Please refer to the user report below: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9586&p=38653#p38653 Note: 3.27.6.0 (3.27.6) works as intended.
Thanks.
|
|
2401 | QCAD (main) | Bug Report | Low | File > Print / PDF Export: Page size always A4 | Closed | |
1 |
Task Description
Only prints on A4 size paper, no matter what settings, print or pdf export, print from model or from layout block
Version: 3.27.7.0 (3.27.7) Internet: QCAD.org Build Date: Sep 29 2022 Revision: 58ecdde Qt Version: 5.13.2 Architecture: x86_64 Compiler: MSVC++ 14.0 (2015)
|
|
2400 | QCAD (main) | Bug Report | Low | View > Selection Filter: Entity type "Any" has no effec ... | Closed | |
1 |
Task Description
The “Any” filter matches no entities.
|
|
2399 | QCAD (main) | Bug Report | Low | Directly edit object's Y coordinate, with a formula, al ... | Closed | |
|
Task Description
Select an object, e.g. a block or text. Hit G P to open the object’s properties.
Select the text input for the X coordinate. Add the string +0.1 to the end. Hit enter. The coordinate is increased by 0.1.
Repeat this for the Y coordinate. The coordinate always becomes 1.
Repeat this a second time, for the Y coordinate, without closing the properties dialogue in between edits. The coordinate updates as expected, e.g. 1.1, 1.2, 1.3...
|
|
2398 | QCAD (main) | Feature Request | Low | Excessive Autosave | Assigned | |
|
Task Description
Autosave currently updates the backup file indefinitely regardless of whether the drawing has been modified since the last autosave. Request only update autosave following additional edits since last autosave.
|
|
2397 | QCAD (main) | Bug Report | Low | Post processor "LaserGBRL (offset) [mm] fails at tabs | Assigned | |
1 |
Task Description
Post processor “LaserGBRL (offset) [mm] fails to turn off/on (M5, M4) at Tabs.
Forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=85&t=9552&p=38496#p38495
|
|
2396 | QCAD (main) | Bug Report | Low | Missing Dim/Label Format information from an extern wri... | Assigned | |
|
Task Description
Please refer to forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9556
The attached example file is written with a third party CAD program in R15. Opened in QCAD CE all Dim/Label information are available. If I load this drawing in QCAD Pro the Dim/Label information are lost.
If I load and save the example drawing with CE the newly written dxf is readable in Pro without any issue.
|
|
2395 | QCAD (main) | Bug Report | Low | Incorrect new lightyear conversion value | Closed | |
|
Task Description
Seen https://github.com/qcad/qcad/commit/302010556a077f71b3de6c3c0f8f3df0282a5da9 And that all entries are a division by 1000
It is exactly 9 460 730 472 580 800 meter To return a correct factor to meters the value must be a factor 1000 larger.
131 return 9460730472580800000 / 1000;
More info: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=9506&p=38295#p38295
Kind regards, CVH
|
|
2394 | QCAD (main) | Bug Report | Low | crash whenn upload immage file or saving a project | Closed | |
|
Task Description
When i try to upload an immage Q cad professional edition last evrsion always crash, the same happens when i try to save a project.
|
|
2393 | QCAD Community Edition | Bug Report | Low | QCad crashes while loading plugins | Closed | |
|
Task Description
Please see this downstream bug report: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=265989
|
|
2392 | QCAD (main) | Bug Report | Low | File > Save: Dimension override for linear format not s ... | Closed | |
|
Task Description
Dimension override for linear format not saved to file.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9536
|
|
2391 | QCAD Community Edition | Bug Report | Low | Fix Dark Theme for Linux | Assigned | |
|
Task Description
The dark theme for Linux is broken:
- Some icons have dark background (expected) and black foreground color (that should be replaced by white of very light gray) - Some icons have light background (not cohesive with the theme). - The command history shows dark blue font on dark gray background. - The grid’s ruler shows black font over dark background for the numbers. - The icons folder is missing in the GitHub repository, but other themes have that folder. - The general icons (open, save, and so on) are not dark theme friendly. A better approach for maybe all the themes would be to use something like the breeze icons pack for LibreOffice, and it will have the added benefit of making the app look more modern.
The icons issue is the biggest problem. They should probably replace the black color for white or very light gray. Even the red accent color is not ideal for dark themes, is not the main issue.
Attached is an image that show the problems and another that shows LibreOffice with the Dark Breeze theme for reference.
|
|
2390 | QCAD (main) | Feature Request | Low | Please add U.S. Survey Feet to the Unit / convert list | Assigned | |
1 |
Task Description
Yes I’m aware that the U.S. survey foot has to be discontinuing December, 31, 22. However - as we’ve learned in the past it takes decades until a unit will disappears for good.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=8&t=9493&p=38245#p38245
|
|
2389 | QCAD/CAM | Bug Report | Low | Import tools (KI) triggers a warning that the import fa ... | Closed | |
|
Task Description
... despite the fact it was successful.
|
|
2388 | QCAD (main) | Bug Report | Medium | CAM module - Tab visibility problem | Closed | |
|
Task Description
Hi, Recently I found out that tabs (CAM module) are only visible on layer 0. If I turn this layer off, all tabs will disappear. It is very inconvenient for someone who create a drawing using multiple layers. Im my case, layer 0 contains the frame and the info table only. When the drawing is ready and verified, I add a layer with a copy of the drawing just for g-code generation. I do it in that way because the drawing sometimes has to be modified for cnc purposes. Please correct this problem.
Tested on: QCAD/CAM Pro 3.27.6 PC with Windows 10.
|
|
2387 | QCAD (main) | Feature Request | Low | Open Drawings on Layout Block by Default | Assigned | |
|
Task Description
As the layout block contains the drawing sheet, the number, the viewports, it’s the presentable part of the drawing.
Maybe QCAD could be able to save on the dxf the “last state” of the drawing. If I saved on the Model and closed, it would open on Model... and if my last save was on the Layout”n”, it would open on Layout “n”.
At least on my work area, when opening a finished drawing, it’s the ideal for it to be opened in a Layout (if it was the active block while saving).
|
|
2386 | QCAD Community Edition | Bug Report | Low | Label "Linear format" missing in Property Editor | Assigned | |
|
Task Description
no task description |
|
2385 | QCAD (main) | Bug Report | Low | ScriptItems are inserted with the unit setting for a ne ... | Closed | |
|
Task Description
Tested on a Win7 32bit and a Win10 64bit system.
With App.Prefs defaults for new drawings set to mm, mm, metric. Inserting a ‘CubeCuttingOut’ with the default size 10 into a drawing in inch results in size 0.39370079” what is indeed 10mm.
One would expect it to be sized 10 units of the target drawing.
Recently reported by Husky concerning the QCAD Utilities by MikeJ. https://qcad.org/rsforum/viewtopic.php?f=30&t=9429&start=15#p38045
ScriptItems are first created on a new (offline) document. QCAD will then adapt the size with unit conversion. Then it will scale, rotate, flip according the ‘Insert Script’ tool options.
This is fully predictable for standard library items where the source is a dxf file with a defined unit and no unit conversion would occur if the library source unit was ‘None’.
I then assume that this can be fixed with setting the new RDocument in InsertScriptItem.prototype.beginEvent its unit to ‘None’. Not knowing what the intended behavior should be for any other case, source or usage ...
Regards, CVH
|
|
2384 | QCAD (main) | Feature Request | Low | need some help with copy with reference and paste | Closed | |
|
Task Description
Dear Mr Mustun,
I’ve got a problem similar to issue 2354.
Sometimes I have to create bigger drawings. Therefore I often create a “main drawing” and some “detail drawings”. I usually do the details in “detail drawing” and transfer them to “main drawing” by using “copy with reference” and “paste”. Until a few days ago it worked quite properly, but now it doesn’t anymore.
Today from issue 2354 I’ve learned that qcad doesn´t use windows clipboard. Can you tell me an alternative way to help me, please?
OS: Windows 11 Home QCAD: Professional 3.27 (.4 ?, purchased July 29th 2022) 64 bit
Sincerely, FW
|
|
2383 | QCAD (main) | Bug Report | Low | Dark Theme -> Layers Names are not visible | Closed | |
|
Task Description
If the Theme is chosen as Dark, the name of even layers in the Layer List is with white color and the name of background is also white. Please see the attachment.
Many thanks!
|
|
2382 | QCAD (main) | Bug Report | Low | DGN file load / import fails | Closed | |
|
Task Description
dgn file load / import fails in Pro and Trial. https://www.qcad.org/rsforum/viewtopic.php?f=2&t=9444
Warnings:
|
|
2381 | QCAD (main) | Bug Report | Low | Crash when modifying toolbar settings | Assigned | |
|
Task Description
QCAD Professional 3.27.6.0 running on macOS 12.4 (21F79)
QCAD sometimes crashes when I am adding or removing items from toolbars. It isn’t consistent and I haven’t seen a pattern about which items trigger the crash. It has happened while editing different files, but I’ve attached attached a very simple example and two crash reports
|
|
2380 | QCAD (main) | Bug Report | Low | SaveAs doesn't always open the associated path of the a ... | Closed | |
|
Task Description
QCAD Professional Win 7 WinInstaller
Version: 3.27.0.0 (3.27.0) Internet: QCAD.org Build Date: Nov 30 2021 Revision: 62c65de Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Related topic: https://qcad.org/rsforum/viewtopic.php?f=31&p=37972#p37964
In script SaveAs.js on line 104 the sourced filename is correct. When this is not empty on line 147 the fileDialog should select this file in its own path. The testing sequence in the topic shows this is not always the case. I am using the system file dialog.
Firts setting the corresponding folder for the fileDialog seems to fix this: 147 if (fileName.length!==0) { 148 fileDialog.setDirectory(fileInfo.absolutePath()); 149 fileDialog.selectFile(fileInfo.absoluteFilePath()); 150 } 151 else { ....
Regards, CVH
|
|
2379 | QCAD (main) | Bug Report | Low | Measures disappearing from DXF file | Closed | |
|
Task Description
We have a client complaining that measures are disappearing from DXF file when it is opened in QCad, but remain visible when exporting the same file in JPEG format. Please see attached files for an example.
Stand-alone QCad version used is 3.26.2.
Version embedded in client application is unknown (awaiting information).
Regards.
|
|
2378 | dwg2svg | Feature Request | Low | Export attributes on block references as namespaced XML... | Assigned | |
|
Task Description
dwg2svg supports exporting the layer name (and probably others?) as namespaced XML attributes (`qs:layer`) which works well. However I’d like to export block attributes as well, as seen on the following screenshot:
https://imgur.com/a/wUd0adE
(...so `ROOM_NAME` would become `qs:ROOM_NAME=”Eötvös terem”` on the respective XML element).
Thanks in advance.
|
|
2377 | QCAD (main) | Bug Report | Low | Modify > Detection > Detect Duplicates: Apply tolerance ... | Closed | |
|
Task Description
Bounding boxes are compared with fixed tolerance.
|
|
2376 | QCAD (main) | Bug Report | Low | Mac Deployment: plugins don't load on case sensitive fi ... | Closed | |
|
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9404
|
|
2375 | QCAD (main) | Bug Report | Low | Edit > Copy: Draw order of copied block reference chang ... | Closed | |
|
Task Description
If I apply “copy with reference” to any block, the block’s draw order is changed to -2147483648 (-0×80000000).
|
|
2374 | QCAD/CAM | Feature Request | Low | Add Spindle Speed to Toolpath Dialog | Assigned | |
1 |
Task Description
When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.
Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.
Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?
Many thanks’, and best regards.
|
|
2373 | QCAD (main) | Bug Report | Low | File > SVG Export: ellipse arcs in non-uniformly transf ... | Closed | |
|
Task Description
Ellipse arcs in non-uniformly transformed blocks are exported incorrectly when the “preserve geometry” option is used.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9388
|
|
2372 | QCAD (main) | Bug Report | Low | Rendering text with \p... escape sequences | Closed | |
|
Task Description
I imported a DXF using the professional version qcad-3.27.6-pro-linux-x86_64 and all text strings have codes prefixed to them like “ql;”. When opening in QCAD qcad-3.25.2-trial-linux-x86_64 the text loads correctly though. Others have confirmed that this seems to be a regression and a non-issue in other viewers: https://www.qcad.org/rsforum/viewtopic.php?p=37667
Here is a file with a single circle and single text number “1” which currently appears as “ql;t0;1”.
|
|
2371 | QCAD (main) | Suggestion | Low | Include more properties for polylines in the Selection ... | Assigned | |
1 |
Task Description
Andrew,
Not OS or Version depending.
We can’t filter on some specific properties of polylines.
Handy would be: - Global Width - Orientation
Specific: - Polyline Pattern But I don’t really search for them ... For some post-op I just need them all to be set to ‘No’. - # of vertices Filtering the complex from the more simple ones. - Including Bulges or not To seperate polylines with arc segments form others. There some operations that don’t really work with bulging. - Z values and/or global Z This would make sense for some but filtering on Z is not common under QCAD as it is 2D.
Regards, CVH
|
|
2370 | QCAD (main) | Feature Request | Low | Retain global width / segment widths when reversing pol... | Assigned | |
1 |
Task Description
Andrew,
Changing orientation of a polyline with RV or by changing it in the Property Editor clears the global width value.
Single line pieces as polyline default to CCW. Still the global width is cleared when trying to set them CW.
I didn’t update since 3.27.0 but reading this topic I suppose it still is valid. Related: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9362
Regards, CVH
|
|
2369 | QCAD (main) | Bug Report | Low | File > Menu Open and Import fails for pdf | Closed | |
|
Task Description
Command Open and Import fails for pdf
Forum report: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9332&p=37508#p37508
|
|
2368 | QCAD (main) | Bug Report | Low | Projections: attributes are not projected | Closed | |
|
Task Description
Affects all projection tools including the dwgmapconvert command line tool.
|
|
2367 | QCAD (main) | Bug Report | Low | Command line arguments not correctly encoded | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=9310
|
|
2366 | QCAD (main) | Bug Report | Low | File > Advanced SVG Export: not launching | Closed | |
|
Task Description
Exception when populating scale combo box
|
|
2365 | QCAD (main) | Feature Request | Low | PDF Import: add support for clipping | Closed | |
|
Task Description
Add support for clipping (FPDF_CLIPPATH).
|
|
2364 | QCAD (main) | Bug Report | Low | Block > Edit Block in Place: working set selection not ... | Closed | |
|
Task Description
Case: open “Edit Block in Place”, select entity or block like you would do to “Add to Working Set”, don’t add - instead cancel “Edit Block in Place”, selection color stay on even it is not treated anymore as selected, to solve that you need to go back into “Edit Block in Place” mode to deselect the entity.
|
|
2363 | QCAD (main) | Bug Report | Low | Context menu of line entry fields: inserting symbol bro ... | Closed | |
|
Task Description
Unicode is inserted instead of symbol from line edit context menus.
|
|
2362 | QCAD (main) | Bug Report | Low | View > Property Editor: Scale property cannot be edited | Closed | |
|
Task Description
The scale property for viewports cannot be edited.
|