|
1925 | QCAD (main) | Suggestion | Low | Poly Ref Points manipulation that generates null-segmen ... | Closed | |
|
Task Description
Win7pro 32bit Wininstaller Qcadpro 3.23.0
With a polyline.
Select the poly. Pick any reference point of a vertex. Place it on any of its neighboring vertex reference points.
A null-segment is created. The placement can not be undone by re-picking the reference point. Can be Undone/Redone. The action can result from editing the vertex coordinates. When exploding null-entities are created.
This action should delete: - if the target is next: the picked vertex. (incl. start or end-1) - if the target is prior: the targetted vertex. (incl. start or end-1) - if the target is and next and prior: both the prior and the picked vertex.
As the user intentionally places any vertex reference points on: - any excluding its neighbors: → the intented nature is ‘Self-Touching’, ‘Self-Crossing’ or ‘Trace-Back’. - any of its neighbors: → the intention is to delete the segment(s).
Regards
|
|
1926 | QCAD (main) | Feature Request | Low | No negative coordinate values ? (DO command) | Assigned | |
1 |
Task Description
Just starting with QCAD, for some hours now - really excellent user interface (compared to other low budget CADs, like DCAD, or BeckerCAD...) !
Surprisingly, point coordinates - entered via the command line, and shown with correct positions on the drawing- are not displayed correctly with the ‘dimordinate’ (DO) command. There are no negative values, even when the center point (0;0) is right in the middle of the drawing, so points left and below should have !
GW.G
|
|
1927 | QCAD (main) | Bug Report | Low | Drawing and printing inconsistent, with wrong/missing e ... | Closed | |
1 |
Task Description
Drawing and PrintPreview are consistent, but printout differs : rectangle missing (bottom right), line missing (bottom green line) - see att. Error can be reproduced, after saves and restores. A VERY elementary WYSIWIG-problem....
|
|
1928 | QCAD (main) | Feature Request | Low | Optionnally 'Auto clean up' after generation of NaN / N... | Assigned | |
1 |
Task Description
Some functions / methods can generate some sort off entity or part with NaN / Null / Null-lenght ... props. Some explicitly don’t and test their actions with isNull().
As these serve a purpose in some processes, trails of them can be part of the results. For some users Null / Null-lenght are meaningfull, for other users these produce errors down the line. In a few cases its a desirable feature eg. controlpoint spline. (Allthough there are no Null props involved with equal successively controlpoints)
Many problem post on the forum are related to Null - Zero and so on.
In some cases it can’t be undone by re-editing the drawing. https://qcad.org/bugtracker/index.php?do=details&task_id=1925
If it can’t be undone by Undo/Redo it is a bug. https://qcad.org/bugtracker/index.php?do=details&task_id=1757
In some cases there is a difference noticed after file save-close-open.
|
|
1930 | QCAD (main) | Feature Request | Low | Option disable "Auto Zoom on load" for saved "Layout Vi... | Assigned | |
|
Task Description
Hi,
my setting for “Auto Zoom on load” is checked to on. That works perfect for me for most of my drawings.
But if I save a drawing with Layout Viewports then I have to adjust every Viewport again after loading.
Would it be possible to have an option below Application Preferences / Graphics View / Appearance / Auto Zoom on load / ON which excludes drawings saved with Layout Viewports?
|
|
1931 | QCAD (main) | Bug Report | Low | File > SVG Export: hatch arc interpolation | Closed | |
|
Task Description
Hatches with arc boundaries are exported as crude polygons.
See also: https://qcad.org/rsforum/viewtopic.php?f=33&t=6494
|
|
1933 | QCAD (main) | Bug Report | Low | File > Advanced SVG export: file overwrite check doesn' ... | Closed | |
|
Task Description
In the Advance SVG Export dialog, when I edit the filename to be different than the default file that already exists and then clear the checkbox for “Overwrite existing file without asking” just to make sure that I haven’t already created a file with the modified name as well, then I get a popup warning that the export would overwrite the default filename, not the name as edited. In other words, the overwrite check ignored the fact that I edited the filename.
Observed on MacOS Mojave (10.14), but probably applies to all.
|
|
1934 | QCAD (main) | Feature Request | Low | Diametric text - overlaid | Assigned | |
|
Task Description
Diametric text is always placed above a horizontal measurement.
I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.
To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.
A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.
Similarly for a vertical measurement, the text is overlaid and illegible.
When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).
Kind regards Simon
|
|
1935 | QCAD (main) | Bug Report | Low | Startup preferences | Closed | |
|
Task Description
Startup preferences
On Mac 10.14.6: QCAD Pro → Preferences... → Startup
Check or uncheck “Enable Splash Screen”
1. Restart of QCAD, the splash screen with Initialising add-ons xx% is identical
2. Apply, Cancel and OK buttons - why have both Apply and OK buttons?
|
|
1936 | QCAD (main) | Bug Report | Low | ver 3.23 not saving font information | Closed | |
|
Task Description
The attached file is not saving font preference. All fonts on the online layer are reported as the standard font. If I highlight one or all of the text entities and change the font to something like Yu gothic light, the property page reports yu gothic light and the screen reflects the changed font. If I save, close and reload, the fonts for all text is again “standard”.
So then I try to enter new text via the “A” draw text command icon. I select “Broadway.ttf” as the main font in the text entry dialog. One word “Broadway” is entered as the text. it appears on the upper left of the screen as expected and the font name is Broadway in the property editor. If I look at the dxf file source there is a whole bunch of text styles. I save and close the file, and then open it again. Now the word Broadway has changed to font name “standard” in the property editor and is very definitely not the Broadway.ttf font.
I am not the originator of the file, I am just trying to change the font. If I start a new file and enter new text the font saves just fine, so I am thinking it is a setting somewhere, but I am unable to find it.
We (me and my customers) use these files for engraving so exact font is critical.
|
|
1937 | QCAD (main) | Bug Report | Low | Circle shown in QCAD but not in AutoCAD | Closed | |
|
Task Description
The attached drawing shows two large concentric circles when viewed in QCAD but the inner circle is missing when viewed in other CAD programmes. This cost $50 in rework as my laser cutting was not cut correctly!
|
|
1939 | QCAD Community Edition | Bug Report | Low | Right click not working in QCAD Community Edition | Closed | |
1 |
Task Description
After I remove the .dll files from the pro trial version, right click stop working on Windows 10. I went a little further to try identifying which of the 5 files specifically causes right click to stop working, and I found that it is qcadproscripts.dll. The presence or absence of the other 4 dll files that make up the pro version has no influence on this behavior.
|
|
1940 | QCAD/CAM | Feature Request | Low | CAM > CAM Configuration: Add program description | Assigned | |
1 |
Task Description
Add a program description to the CAM configuration dialog and export to postprocessors as variable.
See also: https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649
|
|
1941 | Snapshot Release | Bug Report | Low | Invisible layers displayed | Closed | |
|
Task Description
Snapshot release 3.23.0.2
See also: https://qcad.org/rsforum/viewtopic.php?p=24757
|
|
1942 | QCAD (main) | Bug Report | Low | Draw > Circle > Two tangents and point: fails for case ... | Closed | |
|
Task Description
The result of the tool CT2 depends on the position where the circle is constructed.
See also https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6577&p=24772#p24772
|
|
1943 | QCAD (main) | Bug Report | Low | Tool "New from Template" fails | Closed | |
|
Task Description
QCAD 3.23.0.2 File / New from Template fails in different situation like immediately after launching the tool, sometimes after changing directories in the dialog like from imperial to metric etc.. QCAD tries for ever (wait cursor) or even quits QCAD. It’s not a clear pattern ...
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6585
3.23.0.2 doesn’t works 3.23.0 works
Reported on Ubuntu 19.4, Win10
|
|
1944 | QCAD (main) | Bug Report | Low | Block toggle switch for visibility fails | Closed | |
|
Task Description
3.23.02 Block toggle switch for visibility fails. 3.23.0 Block toggle switch for visibility works.
|
|
1945 | QCAD (main) | Bug Report | Low | Splines saved incorrectly | Closed | |
|
Task Description
Closed splines (Control points) are saved as “not closed” with a new knot (when DXF is closed and re-opened). Is this behavious intended ?
|
|
1946 | QCAD/CAM | Bug Report | Low | CAM > Cam Legacy Export: Cut inner paths before outer p ... | Closed | |
|
Task Description
The option “Cut inner paths before outer paths” is ignored, causing trouble when outer paths are cut first.
Attached is a link to the script files and gcode examples.
|
|
1947 | QCAD (main) | Bug Report | Low | Startup failure | Closed | |
|
Task Description
QCAD community, Git ba68e28d3d (current HEAD), fresh clean compile on Ubuntu 18.04/x64 (gcc 7.4.0, Qt 5.9.5)
QCAD version 3.23.0.2
Warning: QApplication: invalid style override passed, ignoring it.
Warning: Qt WebEngine seems to be initialized from a plugin. Please set Qt::AA_ShareOpenGLContexts using QCoreApplication::setAttribute before constructing QGuiApplication.
Warning: action not found: "Scheme"
Warning: RScriptHandlerEcma::eval: script engine exception: "TypeError: Result of expression 'RS.getIdealThreadCount' [undefined] is not a function."
Warning: "<anonymous>(uiFile = 'scripts/Widgets/ViewportWidget/ViewportWidgetQt.ui', graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:172\n<anonymous>(viewports = [object Object], uiFile = undefined, graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:75\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:248\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:796\n<global>() at scripts/autostart.js:834"
Warning: RScriptHandlerEcma::eval: script engine exception: "TypeError: Result of expression 'RS.getIdealThreadCount' [undefined] is not a function."
Warning: "<anonymous>(uiFile = 'scripts/Widgets/ViewportWidget/ViewportWidgetQt.ui', graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:172\n<anonymous>(viewports = [object Object], uiFile = undefined, graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:75\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:248\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:796\n<global>() at scripts/autostart.js:834"
Warning: At least one uncaught exception:
Warning: "<anonymous>(uiFile = 'scripts/Widgets/ViewportWidget/ViewportWidgetQt.ui', graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:172\n<anonymous>(viewports = [object Object], uiFile = undefined, graphicsSceneClass = undefined) at /home/ice/w/qcad/qcad/scripts/Widgets/ViewportWidget/ViewportWidget.js:75\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:248\n<anonymous>() at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:109\n<eval>() at 1\nslotTrigger() at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:209\nmain() at scripts/autostart.js:796\n<global>() at scripts/autostart.js:834"
17:14:39: Debug: "<global>() at 172"
Then QCAD exits (does not start). As far as I remember, 3.23.0.2 release was fine.
|
|
1948 | QCAD (main) | Bug Report | Low | Modify > Offset (through Point): Point orthogonal to en ... | Closed | |
|
Task Description
See also: https://www.ribbonsoft.com/rsforum/viewtopic.php?t=6590
|
|
1949 | QCAD (main) | Bug Report | Low | Modify > Break out: Leftover (zero length line) after u ... | Closed | |
|
Task Description
When using D2 on the vertical line (orange line in the attached example) a small zero length line is left over. This doesn’t happen if the vertical orangle line were a finite, line with two distinct endpoints.
|
|
1950 | QCAD (main) | Bug Report | Low | File > Save As: File dialog offers unsupported export f ... | Closed | |
|
Task Description
QCAD Pro fails to write R10, R9, R2.6, R2.5 dwg files. Younger types and dxf work as expected. Tested the issue back to QCAD 3.18 - no version is able to save those file types.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6620&p=24980#p24980
|
|
1952 | dwg2pdf | Bug Report | Low | Drawing problem for the object in pdf which converted b ... | Closed | |
|
Task Description
The original file is A5.dwg. I’m using QCAD professional 3.23.0. A5.pdf is converted by command line tool dwg2pdf. I found the drawing problem in it. See the attachment file problem.png.
As you see, I write down 3 bugs in problem.png.
1. bug 1. The position of ‘green 90’ is wrong. 2. bug 2. The line width is too large. You can see dot in A5.dwg, but a line in A5.pdf. 3. bug 3. The ‘green 42’ is missing.
Thank you very much for your help!
|
|
1954 | QCAD/CAM | Release | Low | Revised PWM Post Processor | Assigned | |
|
Task Description
Hallo Andrew,
I have revised the PWM Post Processor to Revision D.
|
|
1955 | dwg2pdf | Bug Report | Low | Encoding or font error | Closed | |
|
Task Description
Morning, I found a bug. Andrew, Thank you very much.
Original file: 跨海大桥.dwg
Converted file: 跨海大桥.pdf
Bug Description file: problem3.png
As you see, all the Chinese fonts are drawed as ???
|
|
1956 | dwg2pdf | Bug Report | Low | Missing some drawing elements after being converted by ... | Closed | |
|
Task Description
Morning, I found a bug.
Original file: 006–【武汉会展中心店】一层合用前室.dwg
Converted file: 006–【武汉会展中心店】一层合用前室.pdf
Bug Description file: problem4.png
As you see, there are too many drawings missing.
|
|
1957 | dwg2pdf | Bug Report | Low | Missing some drawing elements after being converted by ... | Closed | |
|
Task Description
Morning, I found a bug.
Original file: 006–【武汉会展中心店】一层合用前室.dwg
Converted file: 006–【武汉会展中心店】一层合用前室.pdf
Bug Description file: problem4.png
As you see, there are too many drawings missing.
|
|
1958 | dwg2pdf | Bug Report | Low | Draw rectangle as ellipse | Closed | |
|
Task Description
Good afternoon, I found a bug.
Original file: 006–【武汉会展中心店】一层合用前室.dwg
Converted file: 006–【武汉会展中心店】一层合用前室.pdf
Bug description file: problem5.png
As you see, all the rectangle fills are drawed as ellipse.
|
|
1959 | dwg2pdf | Feature Request | Low | The table cell is not autofit the content | Closed | |
|
Task Description
Good afternoon, I found a bug.
Original file: 跨海大桥.dwg
Converted file: 跨海大桥.pdf
Bug description file: problem6.png
As you see, the content is not fit in the table cell.
|
|
1960 | dwg2pdf | Bug Report | Low | dwg2pdf command fail | Closed | |
|
Task Description
Good afternoon, I found a bug.
Source file: B5.dwg.
Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 -font-substitution Standard GBK path
After I used the command, the message “Warning: standard font not found” occured. And B5.pdf is not found. Convert is fail.
|
|
1961 | dwg2pdf | Bug Report | Low | Too many drawings are missing | Closed | |
|
Task Description
Hello, I found a bug.
Original file: 006–【武汉会展中心店】一层合用前室.dwg
Converted file: 006–【武汉会展中心店】一层合用前室.pdf
Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 -block=布局1 path
Bug description file: problem8.png
As you see. I use dwg2pdf to export the block named “布局1”. There are too many drawings missing.
|
|
1962 | QCAD/CAM | Bug Report | Low | CAM > Drill Toolpaths: Cannot be edited / updated from ... | Closed | |
|
Task Description
Hallo Andrew,
Found a bug in the drill toolpath generator.
|
|
1963 | QCAD/CAM | Bug Report | Low | Bug Font Standard OR Cam Config | Closed | |
|
Task Description
Hallo Andrew
Confronted with a bug in font Standard glyph ”s” (small S), and a solution.
|
|
1964 | dwg2pdf | Bug Report | Low | The width of line is wrong | Closed | |
|
Task Description
Morning, I found a bug.
Original file: 南博湾3-702户型.dwg
Converted file: 南博湾3-702户型.pdf
Bug description file: problem9.png
Command line: .\dwg2pdf.bat -f -a -recompute-dim -ltscale=1 path
As you see, the width of lines are wrong. Please follow the red arrow in problem9.png.
|
|
1965 | dwg2pdf | Bug Report | Low | More than one problems in it | Closed | |
|
Task Description
Original file: Connected King Room.dwg
Converted file: Connected King Room.pdf
Bug description file: problem10.png
As you see, there are 2 bugs:
1. There are 4 tabs in the original file. But dwg2pdf can only convert one tab to pdf. 2. After converting, the right column drawing is missing.
|
|
1967 | QCAD/CAM | Bug Report | Low | Development snapshot: Toolpath generator problem | Closed | |
|
Task Description
Hallo Andrew,
I had updated QCAD/CAM to 3.23.0.2 and I am confronted with a major bug in the toolpath generator.
|
|
1969 | QCAD (main) | Bug Report | Low | font name not saving correctly | Closed | |
|
Task Description
0 STYLE
5
31D 330 239 100 AcDbSymbolTableRecord 100 AcDbTextStyleTableRecord
2
textstyle11 70
0
40 0.0 41 1.0 50 0.0 71
0
42 0.2
3
CASTELAR.TTF
4
1001 ACAD 1000 Castellar 1071
0
|
|
1971 | QCAD/CAM | Bug Report | Low | CAD/CAM 3D Simulator | Assigned | |
|
Task Description
Hallo Andrew,
Found a bug in the 3D Simulator execution
|
|
1972 | QCAD (main) | Bug Report | Low | Hatch import fails for boundaries with many very small ... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648
|
|
1973 | QCAD (main) | Bug Report | Low | File > SVG Export: polylines with large arc segments (> ... | Closed | |
|
Task Description
Create polyline from clockwise arc with total angle > 180°. Export as SVG. SVG path arc data does not export sweep correctly.
|
|
1975 | QCAD (main) | Bug Report | Low | RPolyline::getOrientation: Wrong orientation for polyli ... | Closed | |
1 |
Task Description
Wrong orientation is returned for polylines with large arcs (>180d).
Replaces FS#1967 .
|
|
1976 | QCAD (main) | Feature Request | Low | Envelope at offset to a poly tool | Assigned | |
1 |
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?t=6650
|
|
1977 | QCAD (main) | Feature Request | Low | Corresponding coordinate format | Assigned | |
1 |
Task Description
Hi,
It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.
This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.
Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).
|
|
1979 | QCAD (main) | Bug Report | Low | View > Layer List: icon spacing | Closed | |
|
Task Description
Snapshot 3.23.04
Spacing for symbols in layer list way to wide compared to previous versions.
Version 3.23.03 - Husky-2019.10.22-02.png Version 3.23.04 - Husky-2019.10.22-01.png
|
|
1980 | QCAD (main) | Bug Report | Low | Display, block position issue | Closed | |
|
Task Description
Drawing created with a previous QCAD version has issues to be correctly displayed in the current snapshot. e.g. drawing opened in QCAD 3.23.0 - works flawless. same drawing opened in QCAD 3.23.4 - has problems to show inserted blocks correctly.
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6660
|
|
1981 | QCAD/CAM | Feature Request | Low | I would like an external post processor | Closed | |
|
Task Description
I use gcode ripper for some of my jobs. (see here: https://www.scorchworks.com/Gcoderipper/gcoderipper.html) This is a large python script that I use to wrap flat code around a cylinder for engraving. What I would like to see is a way to run it from my own custom post processor that I wrote for my machine. Maybe some kind of keyword that allows me to specify an arbitrary external command with some parameters. It would be very helpful to me. I create a lot of ad-hock jobs to run.
Thanks, Chuck Tilbury
|
|
1982 | QCAD (main) | Feature Request | Low | measure DIN 1356 | Assigned | |
|
Task Description
To measure in the format DIN 1356 , Architect It is hard work to do this manual input with meta characters.
|
|
1983 | QCAD (main) | Feature Request | Low | Trim All or Bulk Break out | Assigned | |
4 |
Task Description
This is a trim method I am missing in Qcad.
20 years ago it existed in CadKey. You had a bunch of lines or segments. You defined a (new) line or segment as cutter. ‘Trim All’. You pointed at the side of the cutter entity to trim all intersecting at that side.
Pritty the same as in this topic: https://qcad.org/rsforum/viewtopic.php?t=5221
Only in rare cases I can use Husky’s workaround as pro. It all depends on what else is in the clipping rectangle that is needed to trim all intended. If of no use all single crossing entities have to be chosen one by one.
Regards, CVH
|
|
1984 | QCAD (main) | Performance Issue | Low | Block > Create Block from Selection: Slow for large num ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6672
|