|
306 | QCAD (main) | Bug Report | Medium | Grid can`t be turned off | Closed | |
|
Task Description
Not possible to turn off grid (in application preferencies). In settings looks that accepted (checkbox is unchecked) but in program window is still visible.
|
|
37 | QCAD (main) | Feature Request | Medium | Generate Example Drawings | Closed | |
|
Task Description
a script would be great actually. then we can generate different drawings with different units / scales / paper settings
OdWriteEx from OpenDesign creates something similar: a bunch of rectangles, each with a text label and an entity inside, e.g. “Aligned Dimension” and below a rectangle with an aligned dimension inside
|
|
434 | QCAD (main) | Bug Report | Medium | filling wrong areas | Closed | |
|
Task Description
Hi,
qcad3 shows wrong filling of areas, see attached example in qcad3rc2 (wrong) vs. qcad2 (ok).
Regards - Stefan
|
|
14 | QCAD (main) | Feature Request | Medium | File: Print Preview | Closed | |
|
Task Description
Open
re-enable auto fit
re-enable center
Postponed
Done
-
scale factor
position
paper size
paper orientation
toggle portrait / landscape in toolbar
choose paper format in toolbar
multiple pages with margin and stitch marks
zoom to all pages
color mode (color, gray scale, black white)
scale combo box in drawing preferences empty
|
|
1773 | QCAD (main) | Bug Report | Medium | File > PDF Export / SVG Export / Bitmap Export: file na ... | Closed | |
|
Task Description
Configure QCAD to use native file dialogs Load file Export file as PDF, SVG, Bitmap File name suggested by file dialog is drawing file which means user might accidentally overwrite drawing file.
|
|
2559 | QCAD (main) | Bug Report | Medium | File > Open: dxflib preselected | Closed | |
|
Task Description
File > Open should not preselect the dxflib filter but All Files.
Caused by changed order of loading plugins.
|
|
515 | QCAD (main) | Bug Report | Medium | File - Save / Save as: Null Object ID | Closed | |
|
Task Description
“Null Object ID” exception when saving a previously loaded file.
File: “fs515.dwg”
|
|
387 | QCAD (main) | Bug Report | Medium | Export to pdf fails if same file name used as one previ ... | Closed | |
|
Task Description
In File>PDF Export save a file with the same name in the same place as a previously saved pdf file.
Issue 1 Note that there is no alert to indicate that an attempt to overwrite is being made.
Then use the close preview button and navigate to the top panel file menu.
Issue 2 The usual drop down menu does not work. All other drop down menus do work.
|
|
1821 | QCAD (main) | Feature Request | Medium | Export svg with linetype parameter | Closed | |
|
Task Description
Hi,
as I saw in the svg file and tried it, the ‘stroke-dasharray’ parameter needed (with values) to show the line same as in the editor.
Example: ...
<!-- Line -->
<path d="M207452.1773,1518891.8208 L203034.0991,1518891.8208 " style="stroke:#808000;stroke-dasharray:200,300;stroke-width:25;" qs:layer="layer"/>
...
Thanks, Soma
|
|
2444 | QCAD Community Edition | Bug Report | Medium | Entering letters with diacritics on MacOS in the QCAD T ... | Closed | |
|
Task Description
In order to type a diacritical letter (e.g. with ' (é) or " (ö)), MacOS does not repeat the letter when a key is pressed continuously. Instead a dialog appears which allows the user to select one of the diacritics related to the letter of the key pressed. In QCAD and presumably QT, keeping the key pressed starts typing the letter repeatedly while after the first letter is typed the selector for the diacritical letters appears. So you can still the select e.g. the ü but you have to delete all the u’s that were typed before you were able to release the key.
A stop gap measure is to minimise the ‘key repeat delay’ setting in keyboard preferences so that its easier to stop the repetition in time, but that influences other programs as well.
I suppose this is a QT dependency and hase less to do with QCAD. Still, I wanted to let you know.
Its an ‘acceptable’ nuisance
J
|
|
298 | QCAD (main) | Bug Report | Medium | Elements of a hidden layer are deleted after saving and ... | Closed | |
|
Task Description
All drawing elements belonging to a layer are not existing anymore after:
the layer has been made invisible (unselect the eye symbol of the layer),
the drawing has been saved,
the drawing has been closed
and finally the drawing is reopened.
This behavior has been observed on the following OSes:
Windows XP SP3
Ubuntu 11.04
|
|
1840 | QCAD (main) | Bug Report | Medium | Edit > Paste along entity: endless loop | Closed | |
|
Task Description
Ich habe im Snapshot 3.21.3.14 unter macOS einen Fehler gefunden, der QCAD in eine Endlosschleife führt, sodaß QCAD nicht mehr antwortet. Details siehe unter https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6011#p22435
|
|
1657 | QCAD (main) | Bug Report | Medium | Edit > Drawing Preferences > Printing > Page: no effect ... | Closed | |
|
Task Description
Printer settings cannot be changed for model space.
|
|
1216 | QCAD (main) | Bug Report | Medium | DXF/DWG writing: block name mixup with anonymous blocks | Closed | |
|
Task Description
Anonymous blocks (with names starting with *, imported from other software) can be mixed up on writing.
|
|
1268 | QCAD (main) | Bug Report | Medium | DXF/DWG import: cannot open file with custom linetypes | Closed | |
|
Task Description
If custom complex linetypes embedded in a file refer to a font that is not available for linetype shapes, the file cannot be opened.
Error: Can not open file Please check your access rights, file format and file extensions
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3718
|
|
1970 | QCAD/CAM | Performance Issue | Medium | Drill Toolpath Workaround | Closed | |
|
Task Description
Hallo Andrew,
Fiddling with the drill-toolpath error, a solution seems to be to add the drill location as a ‘single point’ in the ‘source’ sublayer. I am using this as a Bug Work Around.
|
|
973 | QCAD (main) | Bug Report | Medium | Drawing outside zoom limit | Closed | |
|
Task Description
When a drawing is placed in X,Y coordinates QCAD is unable to zoom to the drawing.
We use X,Y coordinates like X=182,635,000 mm Y=579,005,000 mm for the location of the constructions.
If you use Auto Zoom you get to see a small dot on the screen but as soon as you try to zoom to the drawing QCAD jumps within a certain limit and you can’t get to the drawing.
|
|
1121 | QCAD (main) | Bug Report | Medium | Draw > Polyline > Append Node(s) broken | Closed | |
|
Task Description
Selecting the polyline is not possible. Possibly related to update of DrawPolyline tool.
|
|
1736 | QCAD (main) | Bug Report | Medium | Draw > Image: broken | Closed | |
|
Task Description
Draw > Image broken due to UI file resource not being found.
|
|
1163 | ECMAScript | Bug Report | Medium | DoveTail-script crashes QCAD | Closed | |
|
Task Description
Hi!
I just installed QCAD v3.7.5 and it works like a charm.
Then I installed the DoveTail-script (http://www.qcad.org/rsforum/download/file.php?id=623) and after that QCAD won’t start anymore.
This is the output on the command line in Linux:
Debug: RDwgPlugin::init Debug: RDxfPlugin::init Debug: RHelpPlugin::init Debug: RProScriptsPlugin::init Debug: loading patterns from file: “/opt/qcad-3.7.5-pro-linux-x86_64/linetypes/metric/qcadiso.lin” Debug: shape found: “ZIG” Debug: shape found: “BAT” Debug: shape found: “TRACK1” Debug: shape found: “BOX” Debug: shape found: “CIRC1” Debug: shape found: “RIGHT_ARROW” Debug: loading patterns from file: “/opt/qcad-3.7.5-pro-linux-x86_64/linetypes/imperial/qcad.lin” Debug: TIMER: 67 ms - “loading add-ons” Warning: RScriptHandlerEcma::eval: script engine exception: “TypeError: Result of expression ‘action.addToWidget’ [undefined] is not a function.” Warning: “<anonymous>()@/opt/qcad-3.7.5-pro-linux-x86_64/scripts/File/../EAction.js:1180” Warning: At least one uncaught exception: Warning: “<anonymous>()@/opt/qcad-3.7.5-pro-linux-x86_64/scripts/File/../EAction.js:1180” Debug: “<global>() at -1”
Don’t know whether that is a bug in the script or in QCAD, so I am reporting it here.
Christian
|
|
252 | QCAD (main) | Bug Report | Medium | Displayed line thickness too thick. | Closed | |
|
Task Description
This manifestation happened after I had loaded an existing drawing, made modifications, then used print preview and adjusted the scale to fit the paper.
The file was closed. Upon reopening lines designated as .25mm were unusually thick such that two lines 2mm apart appeared as one solid line. Placing the cursor over the line showed it was comprised of two lines.
Changing the properties of a line to make it thinner did not help with one exception and that was to set the line thickness to default, when the two lines became visible.
|
|
41 | QCAD (main) | Bug Report | Medium | dimensions: tolerance shown twice after block insert | Closed | |
|
Task Description
File “ExampleDrawings/data/dim_aligned.dwg”:
choose “Generate Example Drawings” → the element “aligned dimension” (with limits set) shows 0.010.01 now, since both label and tolerance limits are set (according to the property editor):
label: <>\S0.01^0.02;
upper limit: 0.01
same for lower limit
“Generate Example Drawings” inserts the drawings as blocks
|
|
380 | QCAD (main) | Bug Report | Medium | Destroying cross-hatch | Closed | |
|
Task Description
By saving a drawing QCAD is destroying the cross-hatches
|
|
943 | QCAD (main) | Bug Report | Medium | Dashed lines with line weight 0 are displayed as contin ... | Closed | |
|
Task Description
When we create a draft in version 2.2.2 we put dashed lines and the length is 0. We see a dash lines. (see attach file).
When we open the same draft in the version 3.3.2 we don’t see the dashed lines we see a continous lines.
If I changed in the dxf this lines DASHED 370 0 per DASHED 370 5 and changes the preference of the drawing it’s work.
But we don’t want to open all of 180000 drawings to change the length of the dashed lines from 0 to 5. We want that the version 3 print the dashed lines as the version 2.
Thanks
Eric
|
|
216 | QCAD (main) | Bug Report | Medium | CTRL + Left Mouse doesn't work | Closed | |
|
Task Description
CTRL + left mouse button does not add to current selection
|
|
409 | QCAD (main) | Bug Report | Medium | cross-hatching is not possible in v2 drawings with v3 | Closed | |
|
Task Description
If you had created a drawing in v2, it is NOT possible do make cross-hatch in v3.
(the hatch will be made but it is not visible) → drawing example
|
|
953 | QCAD (main) | Bug Report | Medium | Crash while rendering dashed lines with zero length | Closed | |
|
Task Description
Line pattern factor for zero weight lines defaults to 0 which can lead to division by zero.
|
|
1018 | QCAD (main) | Bug Report | Medium | Crash when using Draw > Polyline > Trim Segments | Closed | |
|
Task Description
Draw > Polyline > Trim Segments crashes if QCAD is compiled using gcc 4.2.1 which is the case for the Mac OS X package.
|
|
1293 | QCAD/CAM | Bug Report | Medium | Crash when snapping to intersection points between 3d l ... | Closed | |
|
Task Description
I have a file that makes QCAD crash. I’ve been editing this design across different versions of QCAD over time and this is the first time I have a problem with it.
Steps to reproduce: Open the attached file and try to add some entities or dimensions to it (you may need to create large ones since it seems to depend on the zoom factor; for example a very large ellipse). After a freeze of a few seconds QCAD will quit.
The attached file is a simplified version from which I deleted a number of entities; on the original I can’t do anything – QCAD crashes as soon as I try to create any object.
Cause: 3D lines with x1==x2, y1==y2 but z1!=z2
|
|
1017 | QCAD (main) | Bug Report | Medium | crash when saving file with block attributes | Closed | |
|
Task Description
Hey,
QCAD crashes when saving a drawing that has a block attribute added. This happens both with a block and the exploded version of the block.
Please find attached the system info, as well as an example drawing. In this drawing, there are three boxes. The lower 2 boxes are intended to contain text attributes.
Output from the command line: metastable@metastable:~/opt/qcad-3.4.5-pro-linux-x86_32$ ./qcad Debug: RDxfPlugin::init Debug: RHelpPlugin::init Debug: RProScriptsPlugin::init Debug: TIMER: 90 ms - “loading add-ons” Debug: TIMER: 781 ms - “initializing add-ons” Debug: checking for updates... Warning: QSslSocket: cannot resolve SSLv2_client_method Warning: QSslSocket: cannot resolve SSLv2_server_method Debug: no updates available Debug: checking for updates... Debug: no updates available Debug: RPluginBase: postInit: “DWG” Debug: RPluginBase: postInit: “Pro Tools” Debug: code page: 30 Debug: autosave skipped [08:54:14]: no modifications ./qcad: line 18: 3850 Segmentation fault (core dumped) LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “$@”
Kind regards,
Stijn
|
|
653 | QCAD (main) | Bug Report | Medium | crash on some file operations may be Qt related | Closed | |
|
Task Description
On file open selection from main menu or on output to PDF Qcad crashes
error:
I/O error : No such file or directory /usr/share/mime/inode/directory.xml:1: parser error : Extra content at the end of the document
|
|
872 | QCAD (main) | Bug Report | Medium | Crash in dwg2svg | Closed | |
|
Task Description
Conversion of certain files leads to crashes (segmentation fault).
See: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2501
|
|
312 | QCAD (main) | Bug Report | Medium | Crash | Closed | |
|
Task Description
Pendant la création d’un plan le logiciel se bloque, puis une boite de dialogue Windows apparait : “QCAD a cessé de fonctionner”. Après validation de la fenêtre le logiciel se ferme et toutes les modifications non enregistrées sont perdues.
When creating a plan software hang, then a dialog window appears: “QCad has stopped working”. After validation of the software window is closed and all unsaved changes are lost.
|
|
1032 | QCAD (main) | Bug Report | Medium | Copy / paste: pasting copied block references results i ... | Closed | |
1 |
Task Description
- Copy two block references of block “circle” which contains one circle - Paste into new, empty drawing - Pasted block “circle” contains two circles
|
|
954 | QCAD (main) | Bug Report | Medium | Coordinates entered are interpreted as direct distance ... | Closed | |
|
Task Description
Entering a coordinate (e.g. 20,20) results in direct distance entry instead (angle from relative zero to mouse pointer, length 20).
|
|
181 | QCAD (main) | Bug Report | Medium | command line got uncaught exception | Closed | |
|
Task Description
start QCAD (no arguments → a new blank drawing is shown)
enter “new” into the command line
close both drawings / tabs
click into command line edit field and press “arrow up”
'di' |
|
20 | QCAD (main) | Bug Report | Medium | Changing drawing unit makes QCAD hangs | Closed | |
|
Task Description
Changing the unit of a drawing can make QCAD hangs
Mile: QCAD hangs in endless loop
Nanometer, Microinch: view turns white, at some levels of zoom, it turns gray
Foot, Yard: GraphicsView grid too small meshed
|
|
389 | QCAD (main) | Bug Report | Medium | Changes in "Shortcuts and Commands" are not storable... | Closed | |
|
Task Description
You can’t save changes in “Application Preferences > Shortcuts and Commands”! It works only for the current session - after a restart the settings are back on default
|
|
259 | QCAD (main) | Feature Request | Medium | Chain dimensions | Closed | |
10 |
Task Description
Chain dimensions
|
|
349 | QCAD (main) | Bug Report | Medium | Cannot open saved files | Closed | |
|
Task Description
Hi Andrew
Using Beta 3 v3 saving files to DXf 2010, DWG 2010, or even 2007 only saves succesfully some times. Most of the time I get a warning dialog stating that “Cannot open file” - no suitable importer found?
Please help
Clive
|
|
1357 | QCAD (main) | Bug Report | Medium | Can't open files with special characters in their names | Closed | |
|
Task Description
When opening a .dxf file saved by QCAD with a name containing a special characters (tested with diacritics), it fails with the following message:
Cannot open file
'E:/tèst1.dxf'
Import failed.
How to reproduce: 1 - Save a file (content doesn’t matter, it’s the same with an empty file and a file containing data) using the name “tèst1.dxf” 2 - Try to open the file 3 - Error message
What is expected: The file open.
Note that the problem doesn’t lie in the “save” step: the same file, once renamed to “test1.dxf” opens fine.
|
|
2388 | QCAD (main) | Bug Report | Medium | CAM module - Tab visibility problem | Closed | |
|
Task Description
Hi, Recently I found out that tabs (CAM module) are only visible on layer 0. If I turn this layer off, all tabs will disappear. It is very inconvenient for someone who create a drawing using multiple layers. Im my case, layer 0 contains the frame and the info table only. When the drawing is ready and verified, I add a layer with a copy of the drawing just for g-code generation. I do it in that way because the drawing sometimes has to be modified for cnc purposes. Please correct this problem.
Tested on: QCAD/CAM Pro 3.27.6 PC with Windows 10.
|
|
1820 | QCAD/CAM | Bug Report | Medium | CAM Export: exporting text entities broken | Closed | |
|
Task Description
Hi Andrew,
Kubuntu, QCAD/CAM 3.21.3
Font Standard. Selected as ‘single line’ font for engraving with mill or laser.
While CAM Exporting as G-code Laser (Offset) MM, or as Linux CNC, Exporting gets trapped in a loop.
In Font Standard the glyph’s ? & $ @ s S Q and 2 contains unwanted Z-movements. It seems these glyphs entities are not alligned properly; endpoint last line does not meet startpoint next line; why else the Z-movements?
Could this misallignment also traps Exporting?
|
|
4 | Book | Bug Report | Medium | Book "CAD Instruction" layout issues | Closed | |
1 |
Task Description
Post all kind of layout issues for the book “CAD Instruction” here, e.g. overlapping text.
|
|
1237 | QCAD/CAM | Bug Report | Medium | Blocks should be layer agnostic | Closed | |
|
Task Description
I have created a block from a selection. I have then later created more items on my CAD page using that block, then later yet, moved the objects to a new layer. I noticed that while the object has accepted being on the new layer, the color hasn’t changed to the new layer’s color. I can only get the line color to change if I go into the block itself and move the individual segments of the block to that new layer, then save the new block (which, by the way, I can’t save over the existing block?!?!)
In the sample file attached, you will see that the block item in the 3 o’clock position is in layer 0, while the rest are in “Vent Holes” layer. If you make layer 0 hidden, the one block is hidden (like it should), but the block item refuses to take on the layer’s color even though the block’s color is “By Layer”
|
|
1737 | QCAD (main) | Bug Report | Medium | Block > Attributes > Define Block Attribute: broken | Closed | |
|
Task Description
Broken due to UI file resource not being found.
|
|
580 | QCAD (main) | Bug Report | Medium | Black color reverted to white color on each close | Closed | |
|
Task Description
Hello,
When I started Q3, I selected a White background in the initial dialog window. I opened a copy of a good Q2 file and saw that ALL entities with Q2 Black/White color where forced to be White. Andrew explains this as a mean to avoid unreadable items against the background colors. Remember I selected White as background ? I guess Black/White entities could be better kept as Black ?
Following Andrew’s advice, in Application Preferences =⇒ Graphics View, I unchecked the Auto correct black and white colors check box. The background settings is white. OK.
I went through a process of changing the White color for several layers to Black. I also had to change the color codes for the hatch areas. For instance, the hatch area layer “055_F_Murs” has “14-76-255 / 255-197-179” values in Q2. Why these values are auto corrected to “30-128-255 / 255-191-127” ?
After these changes, I saved the file, closed Q3 and opened the file again.
Catastrophique ! All “Black/White” layers were back to Black and the hatch colors were back to the “auto corrected” values.
Changing the background color to black then white seemed to solve the problem : the layers kept the Black color. Actually it was just an illusion.
Yesterday too much confident, I spent the whole day, modifying layers to Black, adding new layers also Black or custom color, checking the line weight (replacing the “default” (?) value of 0.25 mm with my preferred default value of 0,00 mm, I’ve posted on the forum about this) and so on. I saved the file, closed it. To-day, nearly all layers have lost their colors : - Black ones are again White, - custom color are “auto corrected” as above for “055_F_Murs”, - only the standard non Black/White colors are preserved, like Blue, Magenta etc.
At this point, I can’t continue using QCAD 3 with enough reliability as my color settings are always lost. This is why I qualify this bug as CRITICAL. I don’t want to use a Black background or a Light Blue one. Why do you think all old “green on black VDU” were replaced with “black/color on white” displays, to begin by Apple ?
NB I already reported this but can’t find it in the list (maybe because I forgot to enter a summary ? No warning, happily I had a copy with Notepad), sorry for the duplicate.
|
|
340 | QCAD (main) | Bug Report | Medium | Bitmap export shows selected entities | Closed | |
|
Task Description
|
|
552 | QCAD (main) | Feature Request | Medium | autosave removing last auto saved file | Closed | |
|
Task Description
I would like to see an autosave-option which allows to autosave, but which keeps only the latest autosave file (instead of all). So there would be autosave (if something crashes) but the hard disk is not filled up too fast.
|
|
25 | QCAD (main) | Feature Request | Medium | Autosave | Closed | |
|
Task Description
Autosave
Make interval configurable Enable / disable Path (?)
|