QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  descProgress
 1448 QCAD (main)Bug ReportLow Draw > Shape > Rectangle with Size: polygon option not  ...Closed
100%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4318

 1450 QCAD (main)Bug ReportHigh File > Save: Invalid Symbol Table Name Closed
100%
Task Description

Opens an Autocad .dwg file happily (Pro version x64). Allows you to make changes, when you go to save (or save as), you get the “Invalid symbol table name”.

It should figure this out when file is opened and squawk immediately.

Would be extremely useful to get some additional error details that might allow one to diagnose and fix the problem. i.e. “Invalid symbol table name: _” with the name of the offender.

I tried removing unused blocks, no joy.

 1451 QCAD (main)Bug ReportLow Space doesn't move focus to undocked command line (Linu ...Closed
100%
Task Description

Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4331

 1453 QCAD (main)Bug ReportLow Modify > Clip to Rectangle: exception when clipping poi ...Closed
100%
Task Description

- Create some points
- Modify > Clip to Rectangle
- Make sure some points are inside rectangle

→ Exception

 1454 QCAD (main)Bug ReportLow No HTML field for colours in Ubuntu Linux (Mint) Closed
100%
Task Description

No HTML field for colours in Ubuntu Linux (Mint).

 1455 QCAD (main)Bug ReportLow Orthographic Projection -Cylindrical, clipping query Closed
100%
Task Description

Please refer to attached drawing

1.Draw square 80mm x 80mm.
2.Draw circle in the centre 44mm dia.
3.Select circle and project using orthographic projection tool (cylindrical) with clipping enabled onto copy of square to the right.
4.Clipping should do what? is it suppose to clip the edges of the square? if so it doesn’t clip and doesn’t seem to make any difference whether I enable the ‘clipping’ option or not.

 1456 QCAD (main)Bug ReportLow Drag and drop: requires two clicks with auto snap Closed
100%
Task Description

Drag and drop requires two clicks with auto snap if grid snap and free snap are disabled for auto snap.
- Edit > Application Preferences > Snap > Auto Snap: disable grid and free
- Drag an entity and try to position it
- First click does nothing, second click positions entity

 1457 WebsiteBug ReportLow Website FAQ Deutsch Closed
100%
Task Description

Beschreibung “Fehlerbehebung” fehlt. Anker verweist auf #Troubleshooting und führt ins Leere.

http://www.qcad.org/de/qcad-documentation/faq

 1458 QCAD (main)Bug ReportLow Draw > Polyline > From Segments: empty polyline created ...Closed
100%
Task Description

- Create four arc segments representing a full circle
- Create polyline from segments

Empty polyline is created (caused by simplification).

 1459 QCAD (main)Bug ReportVery Low  File > Revert: changes grid appearance Closed
100%
Task Description

... even if it wasn’t used in the saved drawing.

 1461 QCAD (main)Bug ReportLow Zoom in / out: not centred under mouse cursor if Retina ...Closed
100%
Task Description

see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4381&p=15906#p15906

 1465 QCAD/CAMBug ReportCritical Circle is drawn as polygon Closed
100%
Task Description

Hi,

I have a circle and circle is not round.
Unit of drawing is in metres and radius is set to 2.38.
The circle displays as a polygon instead.

 1466 QCAD (main)Bug ReportLow Toolbars on second screen cannot be accessed if second  ...Closed
100%
Task Description

Hi,

One day I dragged print toolbar into another monitor. This worked ok when I had multiple monitor in the office.
Then I took my laptop out where there is no external monitor connected.
When I tried to use the QCAD I noticed that the tool bar I had dragged onto another monitor cannot be accessed.
I cannot find a way to attach those floating toolbars...

Expected behaviour:
Floating toolbars should be draggable or provide a button to attach it back to qcad main window.

No workaround to attach floating toolbars.

 1467 QCAD/CAMBug ReportLow Short leader will not render the arrow Closed
100%
Task Description

Hi,

I tried to add a leader and for some reason the arrow does not appear. I found out that this occurs when the line is short. To me, line is sufficiently long enough but somehow QCAD thinks it is too short.

Screenshot shows added leader.

Also when I try to change arrow: no to “yes”, while the dropdown shows yes, I am not able to select it. It just defaults to no.

Workaround:
Draw longer line.

 1474 QCAD (main)Bug ReportLow Dimension > Leader: changing options breaks tool Closed
100%
Task Description

Community 3.15.5.3 (Git 9c49f08b), FreeBSD 10.3, Qt 5.5.1

Start the Dimension Leader tool, click a point. While the rubber line is active, click the “Arrow head” option to toggle it (the effect is seen on the rubber line immediately). Now click it again to toggle. The entire dimension disappears with no appreciable trace left anywhere. The DL tool stays active.

Expected outcome would be for the dimension to just toggle the arrow head style.

This only seems to happen if this double-toggling is done as long as no segment is actually created yet (i.e. once at least one segment is actually set, the repeated toggling works as expected).

 1475 QCAD (main)Bug ReportLow Print Preview / fit to pages fails ... Closed
100%
Task Description

... in dependence to the used Units.

I have notice this behavior a couple times before but wasn’t sure what is the trigger for that. Now I figured out one (I’m sure there are more) scenario which shows the effect:

New drawing,
Drawing preferences;
Drawing Units:
Meter,
Meter,
Metric,

Printing Page:
ISO A4

Print Preview:

Auto fit drawing to page - fails to calculate the scale,
Auto fit pages to drawing - fails also ...

Counter test:
same drawing - change Paper Unit to mm,
Reset Paper size to A4 ...

... and it works flawless ;-)

 1476 QCAD (main)Bug ReportLow Draw > Circle > 2 Tangents and Radius: exception with a ...Closed
100%
Task Description

Draw > Circle > 2 Tangents and Radius
Choose two arcs or two circles as tangential entities.

 1477 QCAD (main)Bug ReportLow exception in Viewport.js: sprintf not defined Closed
100%
Task Description

Git 21d95c48, Linux x64, Qt5

Starting QCAD causes it to crash:

QCAD version  3.15.5.4
02:17:30: Debug:    RDxfPlugin::init
02:17:30: Debug:    RExamplePlugin::init
02:17:30: Debug:    TransactionListenerPlugin::init
02:17:31: Debug:    TIMER:  187000000 ns ( 187 ms )  -  "loading add-ons"
02:17:33: Debug:    TIMER:  1492000000 ns ( 1492 ms )  -  "initializing add-ons"
02:17:35: Debug:    TransactionListenerPlugin::postInit
02:17:35: Debug:    got transaction
Warning:  RScriptHandlerEcma::eval: script engine exception:  "ReferenceError: Can't find variable: sprintf"
Warning:  "<anonymous>(widget = RMdiChildQt(0x4e90100), documentInterface = RDocumentInterface(0x4e934e0)) \
        at /home/ice/w/qcad/qcad/scripts/Widgets/Viewport/Viewport.js:52\n<anonymous>() at \
        /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:224\n<anonymous>() at \
        /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:87\n<eval>() at 1\nslotTrigger() at \
        -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:204\nmain() \
        at scripts/autostart.js:743\n<global>() at scripts/autostart.js:780"
Warning:  RScriptHandlerEcma::eval: script engine exception:  "ReferenceError: Can't find variable: sprintf"
Warning:  "<anonymous>(widget = RMdiChildQt(0x4e90100), documentInterface = RDocumentInterface(0x4e934e0)) \
        at /home/ice/w/qcad/qcad/scripts/Widgets/Viewport/Viewport.js:52\n<anonymous>() \
        at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:224\n<anonymous>() \
        at /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:87\n<eval>() at 1\nslotTrigger() \
        at -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:204\nmain() \
        at scripts/autostart.js:743\n<global>() at scripts/autostart.js:780"
Warning:  At least one uncaught exception:
Warning:  "<anonymous>(widget = RMdiChildQt(0x4e90100), documentInterface = RDocumentInterface(0x4e934e0)) at \
        /home/ice/w/qcad/qcad/scripts/Widgets/Viewport/Viewport.js:52\n<anonymous>() at \
        /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:224\n<anonymous>() at \
        /home/ice/w/qcad/qcad/scripts/File/OpenFile/../NewFile/NewFile.js:87\n<eval>() at 1\nslotTrigger() at \
        -1\nopenFiles(args = , createNew = true) at scripts/autostart.js:204\nmain() at \
        scripts/autostart.js:743\n<global>() at scripts/autostart.js:780"
02:17:35: Debug:    "<global>() at 52"

Seems to be a fallout following a1941e2 (removal of sprintf.js from library includes).

Fix:

diff --git a/scripts/Widgets/Viewport/Viewport.js b/scripts/Widgets/Viewport/Viewport.js
index d9bc286..10b9b18 100644
--- a/scripts/Widgets/Viewport/Viewport.js
+++ b/scripts/Widgets/Viewport/Viewport.js
@@ -17,6 +17,8 @@
  * along with QCAD.
  */
 
+include("scripts/sprintf.js");
+
 if (new QFileInfo(autoPath("scripts/Navigation/DefaultNavigation/DefaultNavigation.js")).exists()) {
     include("scripts/Navigation/DefaultNavigation/DefaultNavigation.js");
 }
 1478 QCAD (main)Bug ReportLow compile qcad from git source problem Closed
100%
Task Description

I am following the instructions for compiling qcad from source

http://www.qcad.org/en/component/content/article/78-qcad/111-qcad-compilation-from-sources

I am using fedora 24 and qt4

git clone https://github.com/qcad/qcad

cd qcad
qmake-qt4 -r this step ok
make release this step fails

RSettings.cpp: In static member function ‘static QStringList RSettings::getPrinterNames()’:
RSettings.cpp:722:12: error: ‘availablePrinterNames’ is not a member of ‘QPrinterInfo’

   return QPrinterInfo::availablePrinterNames();
          ^~~~~~~~~~~~

RSettings.cpp: In static member function ‘static QString RSettings::getDefaultPrinterName()’:
RSettings.cpp:726:12: error: ‘defaultPrinterName’ is not a member of ‘QPrinterInfo’

   return QPrinterInfo::defaultPrinterName();
          ^~~~~~~~~~~~

Makefile.Release:2505: recipe for target ‘release/RSettings.o’ failed
make[3]: *** [release/RSettings.o] Error 1

 1479 QCAD (main)Bug ReportLow Modify > Explode: too many segments for splines with la ...Closed
100%
Task Description

Exploding splines creates more segments than necessary in some cases with very large tolerances.
The number of segments created should be the number of bezier spline segments times two.

 1480 QCAD (main)Feature RequestLow dwg2dwg: add command line switches to modify header var ...Closed
100%
Task Description

Add command line switches to dwg2dwg to change header variables during conversion (e.g. DIMASZ, DIMEXT, DIMTXT, ...)

 1481 QCAD (main)Bug ReportLow Block List: update changes selected item Closed
100%
Task Description

- Select a block in the block list.
- Toggle the visibility of another block or add a block, etc.
- Selected block changes

 1482 QCAD (main)Bug ReportLow FTBFS on FreeBSD Closed
100%
Task Description

Git 3ed32041, FreeBSD 10.3, amd64

Qt had been updated from 5.5.1 to 5.6.1 just recently. This resulted in two FTBFSs:

- Missing script bindings for 5.6.1:

--- /dev/null
+++ b/src/3rdparty/qt-labs-qtscriptgenerator-5.6.1/qt-labs-qtscriptgenerator-5.6.1.pro
@@ -0,0 +1,4 @@
+include( ../../../shared.pri )
+
+SUBDIRS = ../qt-labs-qtscriptgenerator-5.5.0/qtbindings
+TEMPLATE = subdirs

After this,

- Project ERROR: Unknown module(s) in QT: webenginewidgets

--- a/shared.pri
+++ b/shared.pri
@@ -46,8 +46,8 @@ macx-ios-* {
 
 !r_mobile {
     greaterThan(QT_MAJOR_VERSION, 4) {
-        greaterThan(QT_MINOR_VERSION, 5) {
-            # Qt >= 5.6
+        greaterThan(QT_MINOR_VERSION, 6) {
+            # Qt >= 5.7
             QT += webenginewidgets
         }
         else {
 1483 QCAD/CAMBug ReportLow Draw -> Polyline -> Create from Segments deletes a segm ...Closed
100%
1 Task Description

With the attached DXF file, select Draw → Polyline → Create from Segments
(O, G) and click on the complex polyline inside the circle (eg on
the top left arc). Apolyline is created with a few segments,
and one or more segments are deleted!

Different segments are deleted depending on which segment is clicked.

 1484 QCAD (main)Feature RequestLow Dimensions: optionally use comma instead of dot Closed
100%
1 Task Description

Use comma to display dimension labels.

 1485 dxflibBug ReportLow dxflib: Lines are on the wrong layer when processing dx ...Closed
100%
Task Description

I create a drawing using QCAD which is stored using dxflib. For some reasons dxflib must be used. This drawing contains arcs and lines on a separate layer. If the dxf file is processed by an other tool only the arcs are referenced to the specific layer. The lines are referenced to the standard layer 0. It doesn’t matter if I’m using the community edition or the pro edition.

After a some investigations I found that the created dxf file is not correct. I manually corrected the dxf file and it works as it should.

For details please refer to the appended files. Take a look to the ENTITY section and the LINE entities, e.g. line 2370. It is just to swap two entities.

Thanks for support.

 1487 QCAD (main)Bug ReportLow On OS X using a trackpad pinch gesture to zoom in / out ...Closed
100%
Task Description

On OS X using a trackpad pinch gesture to zoom in / out breaks panning and zooming. When a drawing is opened or created, pan and zoom functions work as expected. As soon as you use a pinch gesture to zoom in/out all zooming and panning operations (toolbar buttons and scroll bars) begin producing erratic behavior. The drawing has to be closed and re-opened to restore proper operation. Other open drawing windows are not affected and work properly unless you pinch gesture zoom in their window.

 1490 QCAD (main)SuggestionLow Text Edit Control <ESC> maps to <cancel>. If anything i ...Closed
100%
Task Description

For all the Linux VI editor geeks, can you disable the <ESC> function in the text edit mode. <ESC> maps to <cancel>. If anything it should map to <ok>. Which creates no harm as it can be later undone. I have accidentally lost edits countless times due to an unbreakable habit.

 1491 QCAD (main)Bug ReportLow Layer > Create Layer from Selection: cancelling dialog  ...Closed
100%
Task Description

Select entities,
launch the Layer tool: Create Layer from Selection,
change your mind - cancel this tool, ;-)

QCAD moves - regardless the cancellation - all selected entities to the active layer. :-(

 1496 QCAD (main)Bug ReportLow Draw > Circle > Center, Point: coordinate input interpr ...Closed
100%
Task Description

I started a drawing with a circle, center at 0,150 and gave 0,0 as coordinate for a point on the circle and got visually nothing.
After some head scratching and trying to find some error like locked layer, drawing color the same as background color and such, I found at the location of the center (0,150) a circle with radius 0.

I made the following trials, every time starting with a new drawing, entering everything with the keyboard.

Center point on result

circle

0,150 0,0 circle radius 0 at 0,150
0,150 50,50 circle radius 50 at 0,150 (should be a radius of 111.8 from 0,150 to 50,50)
0,150 0,50 circle radius 50 at 0,150
0,150 50,0 circle radius 0 at 0,150

It seems I always get a circle with the radius of the y-part of the coordinate.

Used version of Qcad is:
QCAD version: 3.15.5.0
Date: Aug 19 2016
Qt version: 5.5.1
Compiler version: MSVC++ 12.0 (2013)
Build Date: Aug 19 2016
Revision: 15ef1a13237ff8355ff590fd2e16570ef9de82a0

 1497 QCAD (main)Performance IssueLow Autosnap: hangs with very complex splines Closed
100%
Task Description

Splines with hundreds of control points or fit points can cause hangs when using auto snap near them.

 1498 QCAD (main)Bug ReportVery Low Grid mask lines when zoom Closed
100%
Task Description

All lines are masked when I zoom. Not easy to work!

 1499 QCAD (main)SuggestionLow Add script generator for Qt 5.6.2 Closed
100%
Task Description

As it says on the tin - please add script generator for Qt 5.6.2.

 1500 QCAD (main)Bug ReportVery Low Some plugins not built right in debug mode Closed
100%
Task Description

Building current HEAD (5468b69) with:

/usr/local/lib/qt5/bin/qmake \
        QMAKE_CXXFLAGS="-g -ggdb3 -I/usr/local/include" \
        QMAKE_LIBS="-lcxxrt -L/usr/local/lib" \
        -r
make debug
tinky:~/w/qcad/qcad$ ../qcad.sh
Launching QCAD debug
QCAD version  3.15.5.7
RPluginLoader.cpp:67, static QStringList RPluginLoader::getPluginFiles():
11:25:06: Debug:    Ignoring release plugin built in debug mode:  "libqcadexample.so"
RPluginLoader.cpp:67, static QStringList RPluginLoader::getPluginFiles():
11:25:06: Debug:    Ignoring release plugin built in debug mode:  "libtransactionlistener.so"
RDxfPlugin.cpp:9, virtual bool RDxfPlugin::init():
11:25:06: Debug:    RDxfPlugin::init
RDebug.cpp:81, static int RDebug::stopTimer(int, const QString &, int):
11:25:15: Debug:    TIMER:  1038000000 ns ( 1038 ms )  -  "loading add-ons"
RDebug.cpp:81, static int RDebug::stopTimer(int, const QString &, int):
11:25:19: Debug:    TIMER:  18446744073365584320 ns ( 18446744073365 ms )  -  "initializing add-ons"
RScriptHandlerEcma.cpp:1468, static QScriptValue RScriptHandlerEcma::ecmaMessageHandler(QScriptContext *, QScriptEngine *, RS::MessageType):

For whatever reason, libqcadexample.so and libtransactionlistener.so don’t get named _debug.so (which seems to be the cause for the message), while libqcaddxf_debug.so seems to be OK.

The following diff sorts this out, with no apparent ill effect:

diff --git a/support/examples/exampleplugin/exampleplugin.pro b/support/examples/exampleplugin/exampleplugin.pro
index 0c58c56..d72a866 100644
--- a/support/examples/exampleplugin/exampleplugin.pro
+++ b/support/examples/exampleplugin/exampleplugin.pro
@@ -1,7 +1,8 @@
-include(../../../shared.pri)
 CONFIG      += plugin
 TARGET      = $${RLIBNAME}example
 
+include(../../../shared.pri)
+
 TEMPLATE    = lib
 HEADERS     = RExamplePlugin.h
 SOURCES     = RExamplePlugin.cpp
diff --git a/support/examples/transactionlistener/transactionlistener.pro b/support/examples/transactionlistener/transactionlistener.pro
index ed6c84d..7ee9bef 100644
--- a/support/examples/transactionlistener/transactionlistener.pro
+++ b/support/examples/transactionlistener/transactionlistener.pro
@@ -1,7 +1,8 @@
-include(../../../shared.pri)
 CONFIG      += plugin
 TARGET      = transactionlistener
 
+include(../../../shared.pri)
+
 TEMPLATE    = lib
 HEADERS     = TransactionListenerPlugin.h
 SOURCES     = TransactionListenerPlugin.cpp
 1501 QCAD (main)Bug ReportLow non-layer line type assignment lost on Modify->Copy Closed
100%
Task Description

If a non-layer assigned line type is used, when the object(s) are duplicated the line type reverts back to ‘By Layer’.

 1507 QCAD (main)TaskLow Improve arc rendering for screen-based linetypes Closed
100%
Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=73&t=4566

 1508 QCAD (main)Bug ReportLow QCAD CE: Subscript and superscript formatting lost when ...Closed
100%
Task Description

When multiple superscripts or subscripts are used in a text field, re-opening the saved dxf file will fail to render all but the first super/subscript element. As per attached example. Bug occurs on all Mac OS X from Mavericks onward.

Minimal reproducible steps:
1. Open new document in QCAD
2. Add a text object
3. Make part of the text sub or super-script
4. Make another part of the text also sub/superscript, with at least one ‘normal’ character between the two sub/superscripts
5. Save file and close it. Don’t have to quit QCAD.
6. Reopen the file. Voila, all but the first sub/superscript element is broken.

Dan.

ps. QCAD is a pretty great piece of software, nice work all.

 1509 QCAD (main)Bug ReportLow Ellipse / circle, ellipse / ellipse intersections Closed
100%
Task Description

Not all intersections points between ellipses and circles or other ellipses are found.
This is due to too tight tolerances.

See:
http://www.qcad.org/rsforum/viewtopic.php?f=76&t=4574

 1511 QCAD (main)Bug ReportLow Preferences not saved Closed
100%
Task Description

as read in http://www.qcad.org/rsforum/viewtopic.php?t=2957,
I want to edit my preferences, but it does not save from one session to the other.

I meet the same problem state here,
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=2269&p=7287&hilit=preferences+save#p7287 but the solution two have one change at the time does not work for me.
octal permits are:
120 -rwxrwxrwx@ 1 dr staff

should I change the group ?

In ini file at line 78, it points to a java script:
scripts/Pro/Edit/AppPreferences/ShortcutPreferences,
where is that stored ?

 1513 QCAD (main)Bug ReportLow Layer > Create Layer from Selection: Layer created, sel ...Closed
100%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4583

 1514 QCAD (main)Bug ReportLow Block attributes: association with block reference lost ...Closed
100%
Task Description

Create block reference with attribute
Copy block reference and attribute
Paste

The copied attribute is now associated with the first block reference instead of the second.

 1516 QCAD (main)SuggestionLow QT style on Linux Closed
100%
Task Description

The startup script still forces a QT-style; Getting bored of that one, qcad runs fine with the system default style - probably that was a qt4 thing, that can be removed, so it blends better with the DE?

18c18 /opt/qcad/qcad
< LD_LIBRARY_PATH=”$DIR” “$binary” -style plastique “$@” —

LD_LIBRARY_PATH=”$DIR” “$binary” “$@”
 1517 QCAD (main)Bug ReportLow Modify > Break out Segment: fails with closed polyline Closed
100%
1 Task Description

Occurs when breaking out segment from closed polyline with more than two intersecting entities.

This also affects the hatch from segments tool when used with closed polylines.

Example:
https://raw.githubusercontent.com/qcad/qcad/master/scripts/Modify/BreakOut/Tests/data/closed_polyline.dxf

 1519 QCAD (main)Bug ReportLow Ruler precision always zero Closed
100%
Task Description

Rulers show only whole numbers.

 1520 QCAD (main)Bug ReportLow Modify > Rotate: rotating splines changes start/end tan ...Closed
100%
Task Description

- Create spline from fit points
- Rotate spline
- Spline shape changes due to erroneous start/end tangents

Similar problem when reversing spline from fit points.

 1521 QCAD (main)Bug ReportLow Modify > Offset: fails in certain cases with short arcs Closed
100%
Task Description

Offset curve not trimmed / clipped correctly.

Offset distance: 2.5

 1522 QCAD (main)Bug ReportLow "Hatch from Segments" problem with polylines ... Closed
100%
Task Description

I tried to hatch an area and the Reference Manual said all entities can be used but it doesn’t works at my example. Did I missed something?

The test drawing shows at the top the goal with exploded polylines. At the bottom I have rectangles (Polylines, drawn with the Rectangle tool) what is unfortunately not working.

 1523 QCAD (main)Bug ReportLow Draw > Hatch > Hatch from Segments: fails for circle in ...Closed
100%
Task Description

- Draw circle inside other circle
- Draw > Hatch > Hatch from Segments
- Click both circles
- Right-click

 1524 QCAD (main)Bug ReportLow Command line: cannot enter @ sign in command line on Ge ...Closed
100%
Task Description

@ sign cannot be entered into command line on German keyboards on which Alt-Q has to be pressed to enter @.

This is a Qt/Linux bug which interprets Alt-Q as part of a shortcut starting with Q.

Workaround: change shortcut of Reset tool from QQ to something else, not starting with Q.

 1527 QCAD (main)SuggestionLow "Zeichnungseinheit konvertieren" translation missing .. ...Closed
100%
Task Description

... for the Option bar.

Showing tasks 1551 - 1600 of 1763 Page 32 of 36<<First - 30 - 31 - 32 - 33 - 34 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing