QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  descProgress
 1598 QCAD (main)Bug ReportLow Open In The Browser doesn't work Closed
100%
Task Description

The option “open in the browser” in the “library browser” doesn’t work on Linux Mint 18.2 (KDE) whose default browser is Dolphin.

 1599 QCAD (main)Bug ReportLow Commandline - Can not insert @ - No relative coordinate ...Closed
100%
1 Task Description

Hello,

since 3.17.1 (also on 3.17.2.0) it’s impossible to insert “@” in commandline, so it’s impossible to work with relative coordinates in all funktions like rectangle, line etc.
Please do a fast Bugfix, I need that functionality for workflow urgently :-)

Regards

Andreas

Linux Mint 64bit
Cinnamon
Kernel 4.11.6

QCAD 3.17.2.0

 1600 QCAD (main)Bug ReportLow File > Save As: Only partial information shown for avai ...Closed
100%
Task Description

Some Linux distributions only show filter strings up to the first “(” in the file dialog.

 1602 QCAD (main)Bug ReportHigh QCAD crashes whenever I use the Help/Check for QCAD Pro ...Closed
100%
Task Description

2016 I Mac running Mac OS X Sierra Ver 10.12.5
Program crashes when I use the “Check for QCad Pro updates” in the “Help” menu
Therefor I cannot update to latest version

QCAD Data
Version:
3.16.5.0 (3.16.5)
Internet:
QCAD.org
Build Date:
Feb 6 2017
Revision:
62420f4
Qt Version:
5.8.0
Architecture:
x86_64
Compiler:
Clang 8.0.0

 1603 QCAD (main)Feature RequestLow Curved leader Lines Closed
100%
Task Description

Hi Andrew,

I would like to request an additional option in the dimension tool set to have a curved leader line, could be just the spline tool with an arrow on the end?

Regards

Clive

 1604 QCAD (main)Bug ReportLow  Exploding splines has equal results disregarding the s ...Closed
100%
Task Description

The explode function preference ‘Spline Segments’ has no influence on the created number of polyline segments any more.

Attached is a file with an example.
The same spline exploded with setting 2-4-8 & 128 segments.
Result for the indicated spline is 59 and constant.

 1605 QCAD (main)Bug ReportLow Edit > Paste: Empty layers created when pasting to curr ...Closed
100%
1 Task Description

Copy - Paste to current layer from an other drawing creates empty layers, where the entities orininated from, in the drawing where they are pasted to.

 1608 QCAD (main)Bug ReportMedium Unsupported XData type NOT imported Closed
100%
Task Description

Unsupported XData type NOT imported errors on loading DWG files.
Resulting lines in image are not drawn correctly.
See details and sample file in forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&p=18223#p18223

 1609 QCAD (main)Bug ReportLow Edit > Drawing Preferences: dimension size scale cannot ...Closed
100%
Task Description

Load “Bemassung.dxf” Edit > Drawing Preferences > Dimension > Dimension Settings > Size scale factor: set to 1
Edit > Drawing Preferences > Dimension > Dimension Settings > Size scale factor reverts to 0.5

See:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4926&start=15#p18229

 1611 QCAD (main)Feature RequestLow Cabinet projection at 30 degree also Closed
100%
Task Description

Hi Andrew,

Cabinet projections are usually drawn at 45 or 30 degrees, having drawn up many furniture configurations over the years, would it be possible to add options for 45 and 30 degrees at all?

Regards

Clive

 1612 QCAD (main)Feature RequestLow Multi - Lengthen / Shorten Tool Closed
100%
Task Description

To have an option added to the lengthen / Shorten tool to be able to select more than one entity and do a ‘multi’ lengthen / shorten operation.

 1614 QCAD (main)Bug ReportLow View > Selection Filter: no choices for linetype proper ...Closed
100%
Task Description

Good morning,
i’m using italian version of QCAD.
I’m very satisfied about it.
But the filter selection do not work if you want
to select by linetype.
I can not fill the last field requested with the line type.
Other filters for example color works well.
I’m sorry for my little english , i hope you will understand me.
Thanks a lot.

 1616 QCAD (main)Bug ReportLow Edit > Convert Drawing Unit: leader arrow switched off Closed
100%
Task Description

Case:
Existing Leader with Arrow status “yes” in drawing,
launch “Convert Drawing Unit”,
convert drawing unit,
Leader status for Arrow “yes” is now changed to “no”,

 1617 QCAD (main)Bug ReportLow Edit > Convert Drawing Unit: Views in view list not con ...Closed
100%
Task Description

Case:
Drawing in mm with Entries in the View List,
Convert (CU) drawing from mm to inch,
View List still exist but has lost the coordinates for each defined window,

 1618 QCAD (main)Bug ReportLow Modify > Auto Trim: fails when extending (depending on  ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4984

 1619 QCAD (main)Bug ReportLow Context menu: relocating start point of selected polyli ...Closed
100%
Task Description

Select a polyline
Right click on it to show context menu
Set new position of start point
Tool stays active and does not properly terminate

 1620 QCAD (main)Feature RequestLow Layer Lineweight Default in Application Settings Closed
100%
Task Description

Application Setting to set line weight setting on Layer 0 to a value (Default for example). Currently Layer 0 set to 0.25mm (ISO) New drawings will have Layer 0 set to this “default” line weight. Works for addition of new layers, but not initial Layer 0 on New drawing?

 1622 QCAD (main)Bug ReportLow X Scale Property lost for Simple Texts and Attributes Closed
100%
Task Description

The X scale of block attributes, (and simple text) is not being saved with the drawing.
This problem was fixed for a while, but has re-appeared lately.

 1623 QCAD (main)Feature RequestLow dwg2maptiles: specify single zoom level to generate Closed
100%
Task Description

Add command line argument to generate only one specific zoom level or a range of zoom levels.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5005

 1624 QCAD (main)Feature RequestLow dwg2maptiles: specify single tile to generate Closed
100%
Task Description

Add command line argument to generate only one specific tile for a specific zoom level.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5005

 1630 QCAD (main)Bug ReportLow File > SVG Export: polylines with arc segments with lar ...Closed
100%
Task Description

Polylines with arc segments with large radii are not exported correctly due to imprecise QPainterPath::addArc.

 1634 QCAD (main)Bug ReportLow View > Screen-based Linetypes: arc rendering quality Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5086

 1635 QCAD (main)Bug ReportLow Print current view / Portrait Closed
100%
Task Description

Hi,

if I use the “Print current view” tool for a Landscape format - everything works just nicely!
If I use it for a Portrait print - the scale is way of.

For this example I used a rectangle as reference. The details what I’m looking for are captured with same sized red rectangles. The Paper orientation was changed before I used the Print command. To have the maximum view I select the rectangle and used “Zoom to selection” - then Print to current view.

Portrait, scale way of:
Husky-2017.09.25-03.png

Portrait, manual adjusted - it should look close to this one:
Husky-2017.09.25-04.png

I attache for testing the dxf too.

 1636 QCAD (main)Bug ReportLow Options toolbar: wrong icon size Closed
100%
Task Description

I have an UI icon size inconsistency : Please see the attached image
I set my Edit > Application preferences > Toolbars > Icon Size to 16 px

 1637 QCAD (main)Bug ReportLow Buttons Layer List Widget acting on other open file  Closed
100%
1 Task Description

With multiple files open 4 of the 5 buttons of the Layer List Widget are acting on an other file that is open instead of acting on the file in focus.
in this condition only Add Layer YA acts on the file in focus.

Not easy to reproduce.
Encountered it more frequent
after copy with ref and pasting.
with more then 2 files open.
with similar drawing file names.
Did reproduce after several hopping between files.
Usually acts on the first open file but this can be different as in the example.

workarround none; save all; close all; close Qcad; reopen and redo.

 1638 QCAD (main)Bug ReportLow SansNS.cxf coding mismatch Closed
100%
Task Description

Some 50 glyphs in SansNS.cxf start with [#.... instead of [....
These glyphs are replaced by a ? when used.
Merely removing the # fixes this.
Corrected file included.

 1640 QCAD (main)Bug ReportLow Modify > Offset: Tolerance issue when clipping offset c ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=91&t=5089

 1641 QCAD (main)Bug ReportLow HATCH COMMAND Closed
100%
Task Description

Hatch is not working !

 1642 QCAD (main)Bug ReportLow Selection Filter / Line / Continuous Closed
100%
Task Description

The Selection Filter doesn’t works proper with a Line / Continuous combination. Example drawing has Linetype by Layer and not by Layer

Filter
Entity type: Line
Property: Linetype
Comparison: = (is)
Value: Continuous

... doesn’t finds what I have ask for.
Husky-2017.10.05-04.png

Filter
Entity type: Line
Property: Linetype
Comparison: ≠ (is not)
Value: Continuous

... finds more than that what I have ask for.
Husky-2017.10.05-03

 1644 QCAD (main)Bug ReportLow Crash on hide all layers button / mixed layers of diffe ...Closed
100%
2 Task Description

Hi!

it occorred to me now several times, that I have been working on 2 or more files simultaneously when suddenly on some operations layers from one file showed up in the other file. nothing was pasted when it happened just many files open, or few files with many layers in them. (about 100 layers, but sometimes also only 10 layers)
Today I disabled a single layer in one dxf (A) which caused all layers of the other dxf (B) to show up in the layer list (and the layers that should show up were all gone).

I knew this already from 2 more occurances and tried the best to undo all my changes in (A) before “emergency saving” (A). I closed one of the two dxf files (A), leaving one open (B). Everthing seemed pretty normal again. Then pressing the “hide all layers” button just crashed qcad without any message. That crash on “hide all layers” happened twice today). I can’t reproduce the crash right now, but will add details here when I find something. As far as I remember the bug occured already in qcad 3.17, but I’m now on 3.18.1

thanks :)
Martin

 1648 QCAD (main)Feature RequestLow Uniform Layer listing in dropdown as in Layer List Widg ...Closed
100%
1 Task Description

The order layers are listed in dropdown boxes is different as how there are presented in the Layer List Widget.
Uniformity can shorten lookup time drastically with a large number of layers / sublayers.

 1650 QCAD (main)Feature RequestLow Option to remember / configure specific folder to save  ...Closed
100%
Task Description

Option to remember / configure specific folder to save to when creating a library block.

Currently every time I want to create a library item I have to navigate to where I want to save the block - unless this is a bug and not working properly? I set the library path and re-started QCAD, but it doesn’t seem to work for me now!

 1652 QCAD (main)Bug ReportLow Insert file as block: block attributes not on correct b ...Closed
100%
Task Description

- Insert a block with block attribute definitions from a file (drag and drop or part library) into a new drawing into a layout block or another block that is not the model space block.
- Attributes that are created for the attribute definitions end up in model space instead of the correct block.

 1653 QCAD (main)Bug ReportLow Dimension font configuration only loaded if drawing con ...Closed
100%
Task Description

This bugs me since a long time but I wasn’t able to reproduce it ..... till now!

My Dim Label font for new drawings (Application Preferences) is set to “Helvetica-Bold” Basically it was working just fine for new drawings but from time to time, after saving and reopen my drawing, the font was lost and replaced by “Standard”. No idea why!

Today I was playing with the new QCAD Feature “Default Template” and learned that I loose all the time my preselected font. QCAD ignores that my Template “Drawing Preferences” and also the “Application Preferences” are set to “Helvetica-Bold”. It will be replaced by “Standard”. Annoying! :-(

Ok, question was why it doesn’t happened with all drawings, all the time?
After many tests ....
The “old” blank Template opens with the correct font setting. If I use a Dim in the drawing and save it everything works as expected.
If I save the drawing without a Dim in it then the preselected Font will be replaced by “Standard”. It happens also if I delete all Dims in a so far proper working drawing - save and reopen it leads to the same issue. The Font will be replaced by “Standard”.

The new feature “your own Default Template” will not work regarding the Dim Label font in any cases - the template itself needs at least one Dim in the drawing to keep the desired Font.

 1654 QCAD (main)Feature RequestLow Edit > Convert Drawing Unit: convert viewports Closed
100%
Task Description

Converting the Drawing unit (CU) in Model Space will ruin all preexisting Viewport arrangements in your Layout Block. You have to rebuilt them from stretch or undo the unit conversion.

 1655 QCAD (main)Bug ReportLow File > Print Preview: cannot adjust page preferences fo ...Closed
100%
Task Description

Open Drawing
Switch to model space
File > Print Preview
Edit > Drawing Preferences > Printing > Page: change paper size, scale, etc.
Preferences cannot be applied to model space

 1656 QCAD (main)Bug ReportLow Dimension size scale wrong in viewports Closed
100%
Task Description

Dimensions in viewports do not reflect the configured Edit > Application Preferences > Dimension > Dimension Settings > Size scale factor if value != 1.

 1657 QCAD (main)Bug ReportMedium Edit > Drawing Preferences > Printing > Page: no effect ...Closed
100%
Task Description

Printer settings cannot be changed for model space.

 1658 QCAD (main)Bug ReportHigh Crash when switching to layout block (32bit Linux, Qt4) Closed
100%
Task Description

Affects 32bit Linux when compiled against Qt4 (legacy platform release).

 1659 QCAD (main)Bug ReportVery Low File > Print Preview: does not always open / close prop ...Closed
100%
Task Description

Case:
Drawing with Viewport,
in Model Space - launch Print Preview - Paper size and display ok,
change directly to Paper_Space - Paper size and display ok,
switch back to Model Space - Paper size ok but the Paper display looks infinitive big ...

Print Preview off/on or launching/canceling Drawing Preferences will solve the display issue.

 1661 QCAD (main)Bug ReportLow Viewport rotation issue Closed
100%
Task Description

Case:

1. Launch Add Viewport, adjust setting for scale and rotation, determine Viewport - QCAD will switch to a Layout Block
= scale and rotation works as expected.

2. Launch Add Viewport, determine Viewport - QCAD will switch to a Layout Block,

change scale setting = works as expected on view and frame,

change rotation = works on view BUT NOT ON VIEWPORT FRAME.

 1662 QCAD (main)Performance IssueLow Select > Select Contour: slow for complex drawings Closed
100%
Task Description

Hi!

when working with files containing many not connected elements (non-poly-line elements) a double click can cause a coffee-break easily. The search for connected entities easily takes over 5 minutes on an up to date machine (i7@3.4GHz) with files that are pretty standard in size (2 or 3 MB file size ascii dxf). Adding an interruption-method would be suitable (for example by pressing escape).

attached a file with a polyline of 13000 entities and a second file with just everything duplicated. When exploding the polyline and double clicking an element it takes quite a while until all elements are selected. (this is not an extreme example, I had sometimes 10 minutes of waiting with slightly bigger files, accidently double clicking something).

also an improved algorithm for the search would help to speed up the selection. (e.g. divide the area in smaller parts, do the search there, or an option to search only in the visible view port of the document)

Martin


 1664 QCAD (main)Bug ReportLow Block > Insert Block: attribute color not synced with a ...Closed
100%
Task Description

1. Create new block
2. Edit block
3. Block > Attributes > Define Block Attribute
4. Use property editor to change color of this attribute definition to fixed color
5. Insert block into model space
6. Color of attribute is “By Layer” instead of fixed color

 1665 QCAD (main)Bug ReportLow Edit > Drawing / Application Preferences > Point Displa ...Closed
100%
Task Description

Button for point display mode 99 broken.

 1668 QCAD (main)Bug ReportVery Low Text color of command line unreadable with KDE's Breeze ...Closed
100%
Task Description

I prefer the Breeze Dark color scheme as it find it less stressful on my eyes, however it’s unusable with QCAD where the Command Line prompts and responses are rendered as a very light grey on a white background. I believe the proper fix would be one (or both) of:

  • Make the Command Line area background follow the desktop scheme. (It appears that the text already does so, hence the light text, but since the background doesn’t it becomes unusable.)
  • Provide a configuration option for the text and/or background color used in the Command Line area.

Screen shots are attached showing both Breeze and Breeze Dark schemes.

 1669 QCAD (main)Bug ReportLow Edit > Application Preferences > Defaults for New Drawi ...Closed
100%
Task Description

Blank QCAD template used as the start drawing.

Application Preferences / Dimension Settings

Text hight doesn’t accept anymore input 3.5/25.4 and it will change that in a new drawing to “0” instead to show 0.137795

If I remember correctly: Marked for “Keep proportions” = unchecked in new drawing is desired behavior, correct?

 1670 QCAD (main)Bug ReportLow Layout Blocks are not using print settings from Applica ...Closed
100%
Task Description

My settings below Application Preferences:
Dimension Settings
Drawing Unit: Inch
Paper Unit: Inch
Measurement System: Imperial

Printing - Page
Page Orientation: Landscape
Paper size: ANSI A (Letter)
Paper width: 8.5” Paper height: 11”

Printing Colors
Color Mode: Black / white

Blank QCAD template used as the start drawing.

Issue in Layout Block

Printing Color Black/White changed to “Full Color Mode”,
Default setting to use ANSI A will change to ISO A4 in mm regardless that the Paper Unit is inch and size ANSI A.
Unit is unstable when you change the format a few times. It will switch between mm and inch what can lead to a 8.5 mm x 11 mm Paper size (then called customized!) or 210” x 297” ANSI A4,

Paper orientation preset to Landscape is then Portrait in Layout Block

 1671 QCAD (main)Bug ReportLow Block > Add Layout Block: fails if layout with same nam ...Closed
100%
Task Description

Case

delete a Layout Block in Block List - name e.g. ANSI A P,
create a new Layout Block - try to use the deleted name (ANSI A P) again and it will be declined because the “Layout already exists.

 1672 QCAD (main)Bug ReportLow Dimension tool displays wrong meassurement Closed
100%
Task Description

Case:
Settings are:
General: Drawing Unit
Drawing Unit: Foot
Paper Unit: Inch
Measurement System: Imperial

Dimension Settings: Architectural

Issue:

I draw a horizontal line 12 units (foot) long,
Use then the Horizontal DIM tool and it will display a measurement of 1’ = false,

I draw a horizontal line of 2 units (foot)long,
Use then the Horizontal DIM tool and it will display a measurement of 2” = false,

I assume the input for the line length is handled from the DIM tool as inch and not as feet.

 1677 QCAD (main)Bug ReportLow Dimension: Scale option grayed out in model space Closed
100%
Task Description

... impossible to chose a scale in the DIM option bar.

Showing tasks 1601 - 1650 of 1763 Page 33 of 36<<First - 31 - 32 - 33 - 34 - 35 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing