QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummary  descStatusProgress
 1661 QCAD (main)Bug ReportLow Viewport rotation issue Closed
100%
Task Description

Case:

1. Launch Add Viewport, adjust setting for scale and rotation, determine Viewport - QCAD will switch to a Layout Block
= scale and rotation works as expected.

2. Launch Add Viewport, determine Viewport - QCAD will switch to a Layout Block,

change scale setting = works as expected on view and frame,

change rotation = works on view BUT NOT ON VIEWPORT FRAME.

 1694 QCAD (main)Bug ReportLow Viewport entities - Context menu: does not work Closed
100%
Task Description

QCad 3.19.2 Pro 64 bit. Windows 10, Linux Mint

All functions in context menu does not work with “Viewport entities” (Delete, Cut, Copy,etc).
But all same functions also work with keyboard shortcuts, from command line and buttons from toolbar.

 1147 QCAD (main)Bug ReportLow View > Zoom to selection with only vertical / horizonta ...Closed
100%
1 Task Description

“Zoom to selection” shows no effect on vertical and horizontal lines: Message: “No selection found”.

Recognizable at:
vertical lines, horizontal lines,
Rectangle, Rectangle with size,
Polygon Center Point, Polygon two corner (only in the case that you have vertical/horizontal lines),

Shapes as a polyline - no problem. ;-)

1541QCAD (main)Feature RequestLowView > Zoom > Zoom In/Out: Make zoom factor configurabl...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

 1396 QCAD (main)Bug ReportLow View > Zoom > Window Zoom: magnifying glass cursor not  ...Closed
100%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4068

1443QCAD (main)Bug ReportVery LowView > Status Bar remains uncheckedAssigned
0%
Task Description

Status Bar menu remains unchecked even it is toggled on or off

 1581 QCAD (main)Bug ReportVery Low View > Selection Filter: no inputs for property Linetyp ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4876

 1614 QCAD (main)Bug ReportLow View > Selection Filter: no choices for linetype proper ...Closed
100%
Task Description

Good morning,
i’m using italian version of QCAD.
I’m very satisfied about it.
But the filter selection do not work if you want
to select by linetype.
I can not fill the last field requested with the line type.
Other filters for example color works well.
I’m sorry for my little english , i hope you will understand me.
Thanks a lot.

1596QCAD (main)Feature RequestLowView > Selection Filter: add filter for custom properti...Assigned
0%
Task Description

See also:
https://qcad.org/rsforum/viewtopic.php?f=32&t=4840

 1310 QCAD (main)Bug ReportLow View > Screen-based linetypes: no patterns for circular ...Closed
100%
Task Description

Circles and arcs with dash patterns are not rendered properly if View > Screen-based linetypes is activated.

 1634 QCAD (main)Bug ReportLow View > Screen-based Linetypes: arc rendering quality Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5086

 1344 QCAD (main)Bug ReportLow View > Property Editor: Linetype property resets to "By ...Closed
100%
Task Description
  • Make sure Property Editor is not shown
  • Select entity with custom linetype (e.g. dashed)
  • View > Property Editor
  • Property “Linetype” is shown as “By Layer”
 1787 QCAD (main)Bug ReportLow View > Property Editor: Layer combo box not sorted Closed
100%
Task Description

Layer combo box in the property editor is not sorted.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5714

 1753 TranslationBug ReportLow View > Property Editor: entity types in property editor ...Closed
100%
Task Description

Translations in scripts/ts are not loaded (affects splash screen, property editor, default action, various standard messages, some context menus)

 1784 QCAD (main)Bug ReportLow View > Property Editor: Block attribute labels with int ...Closed
100%
Task Description

Bei der Eingabe von Blockattributen im Eigenschaften Editor werden die deutschen Sonderzeichen nicht richtig wiedergegeben.

When entering block attributes in the Properties Editor, the German special characters are not displayed correctly.

 1304 QCAD (main)Bug ReportLow View > Auto zoom: empty blocks not ignored Closed
100%
Task Description

Affects drawings with block referenced to empty block for auto zoom and command line tools (dwg2bmp, dwg2pdf, ...).

1133QCAD (main)Feature RequestLowView > Add View: save layer stateAssigned
0%
Task Description

Save layer state (visibility) with each added view object (optional?).

 1365 QCAD (main)Bug ReportLow View > Add View: Exception Closed
100%
Task Description

Exception in View > Add View:

TypeError: Result of expression ‘validator.validate’ [undefined] is not a function.

Affects Qt 5 (QCAD for Windows 64bit and Mac OS X 64bit)

 102 QCAD (main)Bug ReportLow View Closed
100%
Task Description

View–>Edit View or Pick View Crash!!

705QCAD (main)Bug ReportLowVerwaltung Library Resourcen und Favoriten ....Assigned
0%
Task Description

Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....

Hier meine Gedanken ....

In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.

Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.

Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX ;-) Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.

Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!

OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”:
QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!

Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.

721QCAD (main)Bug ReportLowVertical dimensions imported as horizontal dimensionsAssigned
0%
Task Description

Vertical dimensions created with 3rd party applications are sometimes imported as horizontal dimensions with length 0. Changing the angle in the property editor fixes the problem.
Problem occurs in QCAD 2.2 and QCAD 3.0.

 35 ECMAScriptTaskLow Verify ECMAScript code Closed
100%
Task Description

Verify ECMAScript code with:
http://www.javascriptlint.com/download.htm

 900 QCAD (main)Bug ReportHigh Using text in 3.1.2 freezes QCAD Closed
100%
Task Description

Placing text in a drawing using 3.2.1 causes the application to freeze.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8355#p8355

 1374 QCAD (main)Bug ReportLow Using Filter in Tool Settings fails Closed
100%
Task Description

Presumably after entering a search filter one would press enter on the keyboard, when I enter for example ‘Line’ and press enter the dialog closes and nothing happens ?

802QCAD (main)Feature RequestLowUser defined toolbarAssigned
0%
Task Description

It would be a nice feature to be able to define your own toolbar.

See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2393

618QCAD (main)Feature RequestLowuser defined lineweightAssigned
0%
2 Task Description

To have the option to set your own ‘user defined’ line weight.

 844 QCAD (main)Feature RequestLow user defined line styles and weights Closed
100%
Task Description

It would be nice to have the possibility to design and use your own line styles, in addition to the built-in ones.
Also nice to have are user defined line weights, in addition to the built-in ones.

 1300 QCAD (main)Bug ReportLow User defined hatch patterns not saved properly with hat ...Closed
100%
Task Description
  1. Add user defined hatch pattern to patterns directory
  2. Create drawing using that hatch pattern
  3. Save drawing
  4. Pattern stored with hatch entity does not match user defined pattern
694QCAD (main)Feature RequestMediumUser coordinate systems (UCS)Likely to be implemented
0%
5 Task Description

UCS support.

724QCAD (main)Feature RequestLowUseless reference point entering when moving relativelyAssigned
0%
Task Description

Hi,
this is a usability feature request:

If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.

It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).

Thx

827QCAD (main)Feature RequestLowUse Properties Editor to define Properties of newly cre...Assigned
0%
Task Description

If there is no selection the Properties Editor could be used to predefine the properties of to be drawn elements.

1131QCAD (main)Feature RequestLowUse different units for construction and dimensionsAssigned
0%
Task Description

E.g. use Millimeters for construction while dimensions are displayed in Meters.

 117 QCAD (main)Bug ReportLow Use APPID when handling extended entity data to prevent ...Closed
100%
Task Description

Rationale:

Let QCAD handle extended entity data, that is used in the industry to instruct postprocessing applications, e.g. the tooling of a mill or robot.

When I say group code or specs below, I refer to this document http://www.autodesk.com/techpubs/autocad/acad2000/dxf/extended_data_dxf_ab.htm

Current:

In the property editor I can add key value pairs to drawing entities. As in this script:

entity.setProperty(new RPropertyTypeId("MY_KEY"), "MY_VAL");
entity.setProperty(new RPropertyTypeId("MY_REAL"), 123);

In DXF this results in a group code “QCAD” followed by alternating keys and values as strings and typed positions respectively:

[…]
  0
LINE
[…]
1001
QCAD
1000
MY_KEY
1000
MY_VAL
1000
MY_REAL
1040
123.0
[…]

Expected:

From reading the specs, this looks perfectly valid. I’d say though, that QCAD is not right to expect any extended data to follow this pattern. The extended entity data, that I want to recreate eg, looks like this:

[…]
  0
LINE
[…]
1001
MY_DATA
1000
MY_FOO: some text
1000
MY_BAR: 1.250000
[…]

That is: a group code, followed by some string values. Notice that the (limited) typing facilities mentioned in the spec are not used, but the application relies on its own peculiar parsing. The same group code appears in the head of the document as an APPID:

[…]
  0
APPID
  2
MY_DATA
 70
     0
  0
[…]

Proposed:

I suggest, that QCAD uses APPIDs to group extended data. Otherwise data loss may occur. In order to not have to maintain a table of known APPIDs, that tells how to parse their extended data, I further suggest that QCAD not expect extended data to follow a “key value” pattern but an “APPID entries” pattern. Here too data would be lost, if there was an odd number of entries in the extended table and QCAD insisted on its own approach.

Within the specs, deep trees could be constructed with the use of the control string (code 1002, { and }), and the propertyEditor would become a nightmare;) So I propose, that QCAD might parse only extended data with its own APPID in key value pairs, and data with other APPIDs as just an ordered list of entries. (In ECMAscript an array will have to be used, as object properties do not keep sequence.)

 1240 QCAD/CAMBug ReportLow USB Flas Drive save makes the drive Read Only Closed
100%
Task Description

This problem is USB Flash drive related.

First of all, QCAD does not show the flash drive a drive where data can be stored, but it does when one wants to open a file.

If one then did open a file from the flash drive, saving it back tot he flash drive change the permission of the entire drive to read only and I could not manage to change that other than formatting the drive.

 1383 QCAD (main)Bug ReportLow Updating to Latest QCAD version - Lost Library items ? Closed
100%
Task Description

When I updated to the most latest version of QCAD I now have no library items - all gone!

 1113 QCAD (main)TaskLow Updating spatialindex? Closed
100%
Task Description

Prompted by d9beb4 - this is actually fixed in current upstream sources (by killing bzero in favor of memset, which is the right thing to do).

It might worth considering to update the spatialindex component.

 536 QCAD (main)Bug ReportHigh Update RC5 NO icons Closed
100%
1 Task Description

After Update to RC5 there are NO icons displayed

 466 QCAD (main)Bug ReportLow unwanted auto-inserted layer on save Closed
100%
Task Description

after saving with qcad3 and re-opening, sometimes there is an additional layer “Defpoints” for unknown reason (qcad2 did not, qcad3 does not always)

 1608 QCAD (main)Bug ReportMedium Unsupported XData type NOT imported Closed
100%
Task Description

Unsupported XData type NOT imported errors on loading DWG files.
Resulting lines in image are not drawn correctly.
See details and sample file in forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&p=18223#p18223

 1558 QCAD (main)Bug ReportLow unlayed lines Closed
100%
1 Task Description

DWG archive opened by QCAD (15.X/16.X - Linux mint 18.1 and Windows 10) does not show traits that represent project windows, when the same file is opened by the dwg True view they appear, follows archive for evaluation.

 581 QCAD (main)Bug ReportLow Unit sizes in 'metric' templates misleading - showing a ...Closed
100%
Task Description

Windows 7 -64

In the metric templates the unit size shown in the preview is showing as ‘Inch’ instead of millimeter. probably just a ‘typo’ mistake here as in reality when you open up a ‘metric’ template they are indeed measuring in millimeters!

 543 QCAD (main)Bug ReportLow Unit Konvertierung bei Blocks funktioniert nicht ... Closed
100%
Task Description

Wenn ich eine Zeichnung in mm als Grundlage benutze um über die Zwischenablage etwas in eine Inch Zeichnung zu übernehmen wird alles Maßstäblich in Inch konvertiert.
Sehr schön ;-)

Wenn ich aber einen Block der in einer mm Zeichnung erstellt wurde über die Zwischenablage in eine Inch Zeichnung kopiere wird die Kopie als solches in der Zeichnung auch wieder in Inch konvertiert - der Block wird aber abgelegt in 1mm = 1” und kann unbearbeitet nicht weiterverwendet werden.
Nicht schön :-(

Natürlich kann man jetzt fragen: Wer braucht solch einen Blödsinn? Antwort: Amerikaner! In den USA wird blödsinniger weise gemixt ..... :-(

 345 QCAD (main)Bug ReportLow unit foot: no dotted line Closed
100%
Task Description

can’t make a dotted line on a drawing with unit foot.

  • drawing unit: foot (length taken from a actual architecture plan)
  • layer settings: as shown in the screen shot
  • selected line is on layer “dotted”
  • line types is shown as continues for almost everything
 1648 QCAD (main)Feature RequestLow Uniform Layer listing in dropdown as in Layer List Widg ...Closed
100%
1 Task Description

The order layers are listed in dropdown boxes is different as how there are presented in the Layer List Widget.
Uniformity can shorten lookup time drastically with a large number of layers / sublayers.

 1083 QCAD (main)Bug ReportLow Undo: Rotation of XLines Closed
100%
Task Description
  1. Create XLine
  2. Rotate XLine
  3. Undo
  4. Unexpected result
1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
0%
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

 105 QCAD (main)Bug ReportHigh Undo after line end point drag'n'drop operation Closed
100%
Task Description

Undo undoes end point movement and angle change (angle property should be ignored in undo/redo operations).

821QCAD (main)Feature RequestLowUnderline text optionAssigned
0%
Task Description

Feature request - to have an option to underline text.

 419 QCAD (main)Bug ReportLow Uncaught exception: GridSettings.js Closed
100%
Task Description

Uncaught exception at C:/Program Files/QCad Professional\\scripts/Edit/DrawingPreferences/GridSettings/GridSettings.js:40: TypeError: Result of expression \’GridSettings.widgets[\”GridSpacingXUnit\”]\’ [undefined] is not an object.

After the closure of qt debuger another message then qcad finally start
It\’s only at the first start of qcad.

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1746

 1097 QCAD/CAMBug ReportLow uncaught exception: /LibraryBrowser.js:362 Closed
100%
Task Description

$ git status
On branch master
Your branch is up-to-date with ‘origin/master’.

$ qcad
Debug: RDxfPlugin::init
Debug: RExamplePlugin::init
Debug: TransactionListenerPlugin::init
Debug: TIMER: 59 ms - “loading add-ons”
Warning: “QFormBuilder was unable to create a custom widget of the class ‘QWebView’; defaulting to base class ‘QWidget’.”
Debug: TIMER: 602 ms - “initializing add-ons”
Warning: Script Exception:
“TypeError: Result of expression ‘tagsBrowser.page’ [undefined] is not a function.”
Warning: “<anonymous>()@/home/mo/opt/qcad/scripts/Widgets/LibraryBrowser/LibraryBrowser.js:362”
Warning: RScriptHandlerEcma::eval: script engine exception: “TypeError: Result of expression ‘tagsBrowser.page’ [undefined] is not a function.”
Warning: “<anonymous>()@/home/mo/opt/qcad/scripts/Widgets/LibraryBrowser/LibraryBrowser.js:362”
Warning: At least one uncaught exception:
Warning: “<anonymous>()@/home/mo/opt/qcad/scripts/Widgets/LibraryBrowser/LibraryBrowser.js:362”

I have some large library, but the library browser is always crashing since long time and several versions, also tagged versions. I need to disable it by removing LibraryBrowser.js completely or deleting my configuration in order to get QCad starting again.
This is the master head from git, on Gentoo@amd64

Showing tasks 51 - 100 of 1837 Page 2 of 37 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing