QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
 1768 QCAD (main)Bug ReportLow Draw > Polyline > Create From Segments: segments delete ...Closed
100%
1 Task Description

‘Create From Segments’ ‘OG’ includes and admits selection of segments on locked layers.

A)
-When selecting a segment on a not locked layer it can include segments on locked layers that connect to the string. (Assumed wrong)
-A copy of the segments on the locked layer(s) are included in the polyline. (Assumed wrong)
These segments are not removed from the locked layer(s) because of their locked nature. (Intended behaviour)
eg. ‘OG’ & selecting the arc at point A in the example file. The arc is on a not locked layer.

B)
-When selecting a segment on a locked layer it will fully remove segments that connect to the string on not locked layers. (Assumed very wrong)
-Connecting segments on the locked layer(s) will not be converted to a polyline because of their locked nature. (Intended behaviour)
eg. ‘OG’ & selecting the line at point B in the example file. The cyan lines are on a locked Layer.

Both A & B can be undone.

The example is a part of the ‘Skewing project’.

Regards
CVH

 1767 QCAD (main)Bug ReportVery Low Dimension Leader Closed
100%
Task Description

On print mode, the arrow not appear in the dimension

 1766 QCAD (main)Bug ReportLow Edit > Application Preferences: Tool Settings: cannot a ...Closed
100%
Task Description

I wanted to add a couple of toolbars to the Tool matrix via the Tool Settings application preferences but all options are greyed out (see attached screenshot). I tried with a new config file and the result is the same. Is this the expected behaviour?

1765QCAD (main)Bug ReportVery LowErrors with polyline offsetAssigned
0%
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360° curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

1762QCAD (main)Bug ReportVery LowModify // .... selection of entities on locked layer al...Assigned
0%
Task Description

Not served with the degration to ‘Suggestion’ FS#1759.
Demanded closing FS#1759 & re-entered

Locking entities (by layer) to avoid selection,eg. nearby,very close by or on the same spot, does not have the intended influence.

Asumed wrong:
- Modify DI
- Modify B2
- Modify D3
- Modify MT
These 4 need a single entity to be selected and selection of a locked entity is allowed.(=questionable)
The action will allways leed to ‘not allowed’.(=correct)

Questionable:
- Modify RM
- Modify CH
- Modify RN
These 3 need a pair of entities.
RM: Selection of a locked limiting entity is allowed (=questionable), enity to trim not.(=correct)
The action will trim unlocked entities to the locked limiter.(=questionable)
CH & RN: Selection of a pair of entities is allowed.(=questionable)
Trimming if ‘trim’ is on will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation of the bevel or rounding on an active locked layer will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation, except for polyline segments (because locked themself), on an active unlocked layer will be done.(=correct)

Less severe but still questionable: (because these don’t necerally act on the locked entities themselves)
- Modify OF
- Modify OH
- Modify SS
OF: Selection of a locked base entity is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
OH: Selection of a locked base entity is allowed.(=questionable)
Selection of point references from entities on locked layers is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
SS: Selection of point references from entities on locked layers is allowed.(=questionable)
Strechting is only done for unlocked entities. (=correct)

 1761 QCAD (main)Bug ReportLow Info Polyline area does not find polylines (II) Closed
100%
Task Description

Selecting Info // Polyline area
And hovering over a drawing with all kinds of entities.
Does not find any polyline on the drawing hovering over them.
Nor clicking on them.

Not a locked layer issue.
All are visible.

1760QCAD (main)Bug ReportVery LowSelf-crossing polylines can't be cut twice at segment c...Assigned
0%
Task Description

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 

Regards

 1758 QCAD (main)Bug ReportHigh Draw > Polyline > Create from Selected Entities: crash  ...Closed
100%
Task Description

(Re-)combining polys touching at node with ‘create from selected’ leads to application crash.

QCAD 3.20.1 Win7 32bit

In the file example 2.
Regards

 1757 QCAD (main)Bug ReportLow Modify > Auto Trim: on polyline, followed by undo yield ...Closed
100%
Task Description

Breaking up self-intersecting Polys at segments crossing
can’t be done for the second segment.

Divide:
A new node is inserted and made start and end node.
For the second segment no division occurs or can be made.
Expected is that the segment the nearest to the selecting point is addressed.
Eg. the trim command.

Breakout gap:
- 1 Part fully trimmend of
- Can be undone

Auto trim:
(hint: do file-save first to revert)
- 1 Part fully trimmend of
- Undo will wipe the complete poly

In the file example 1.

Work-arround:
- Divide
- Insert node on the second segment not at the crossing
- Divide at that node
- Move new nodes to crossing

QCAD 3.20.1 Win7 32bit
Kind Regards

 1756 QCAD (main)Bug ReportLow Polyline area wrong if polyline contains arc segments Closed
100%
Task Description

The area of polylines with arcs can be incorrect.
With only line segments it is correct as far as I can check.
See <Poly-line Area.dxf> ; <Poly-arc Area.dxf>

It does not depend on the quadrant their in nor with what point the start point is.
It is related with the oriëntation.
Flipping or mirroring horizontally induce the error.

Modifications like flip, move & copy may induce another error that locks the oriëntation.
It is noticed that the oriëntation property in the editor does not change anymore when reversing.
Although locked the value of the area property switches between good and wrong.

The master poly in question is a part of an arc and a part of an ellipse exploded 1024/full.
These where recombined to one poly with ‘Create from selection’ and are closed.
Closed as per the last vertex does not point to the start point, logically closed I presume.
The purpose is to sum the error surface for the skewing math.
For now I will use my common sence to distinguish what value is the correct one.
Reversing while found faulty is the solution.

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)
Win7 32bit

Regards

 1753 TranslationBug ReportLow View > Property Editor: entity types in property editor ...Closed
100%
Task Description

Translations in scripts/ts are not loaded (affects splash screen, property editor, default action, various standard messages, some context menus)

 1752 QCAD (main)Bug ReportLow Not selecting text with sub/superscript Closed
100%
Task Description

Found a strange behaviour with formatted text.

File attached.
‘Draw’-selecting only the yellow text with a little space arround it
- L>R or R>L ⇒ Yellow text not selected.

‘Draw’-selecting only the yellow text with a little space from R>L but crossing the text half way
- Yellow text Selected ⇒ Expected behaviour.

‘Draw’-selecting just including the mentioned little circles.
- Orange L>R or R>L ⇒ Normal texts selected ⇒ Expected behaviour
- Green L>R Yellow not R>L Yellow selected ⇒ Expected behaviour
- Magenta L>R or R>L ⇒ Yellow text not selected ??
- Red L>R or R>L ⇒ Yellow text not selected ??

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)
Windows 7 32-bit

Kind Regards

 1751 QCAD (main)Bug ReportVery Low Can't open files from terminal Closed
100%
Task Description

I have file /home/test/test.dxf . When i try open file from terminal (qcad test.dxf), i have warning “File not found”. When i write full path (qcad /home/test/test.dxf), the file opens.

 1750 QCAD (main)Bug ReportMedium trimming polylines Closed
100%
Task Description

Trimming polylines especialy those with a string of small segments should be done at the intersection of those polylines.
Now trimming is done with the seggments that where the nearest when selecting the two polylines.

 1748 QCAD (main)Bug ReportLow error when editing block with attributes Closed
100%
Task Description

when editing a block and deleting one of the preferred attributes you need to restart the qcad so that the excluded attribute disappears from aba properties when the block is selected;even after synchronizing block attributes

 1747 QCAD (main)Bug ReportMedium Scaling w 2 ratios fails to scale polyline arc Closed
100%
Task Description

Scaling without keeping the aspect ratio fails to scale an arc to an ellips when this is part of a polyline.

Discovered while documenting feature request ‘Skewing’

CVH

 1746 QCAD (main)Bug ReportLow File > Bitmap Export: File base name cut off in file sa ...Closed
100%
Task Description

A file with name of 1234.56.78.0001.00 Something blah blah.dxf will not export to bitmap correctly. The save dialog will suggest filename of 1234.56.78.0001.jpg instead, truncating everything after last dot.

This bug existed in older versions too because of incorrect handling of file names. As a result, at some point File.getSaveFileName incorrectly truncates the extension (which is empty at the time) and replaces it with jpg. Appending a null extension fixes this, though obviously it’s not a correct fix.

Here is a temporary workaround in File.js:

File.getInitialSaveAsPath = function(filePath, extension) {
    var ret = "";

    var fi;

    if (isNull(filePath) || filePath.length === 0) {
        var mdiChild = EAction.getMdiChild();
        var fn;
        if (!isNull(mdiChild)) {
            fn = stripDirtyFlag(EAction.getMdiChild().windowTitle)
        }
        else {
            fn = "File";
        }

        fi = new QFileInfo(QDir.homePath());
        ret = fi.absoluteFilePath() + QDir.separator + fn + "." + extension + ".nothing"; // Workaround here
    } else {
        fi = new QFileInfo(filePath);
        ret = fi.path() + QDir.separator + fi.completeBaseName() + "." + extension + ".nothing"; // Workaround here
    }
    return ret;
};

 1745 QCAD (main)Bug ReportLow File > Bitmap Export: thick lines exported thin Closed
100%
Task Description

When exporting a drawing under latest version of QCAD, for whatever reason QCAD ignores all line thicknesses and there is no option to fix it. The error is in BitmapExportWorker.js (line 134). It should read:

view.setHairlineMinimumMode(false);

(currently, it uses “true” instead)

 1744 QCAD (main)Bug ReportLow QCAD crashes when opening .dgn files Closed
100%
Task Description

Have tried several samples from the web and the result is the same.

Here is the event log entry:
Faulting application name: qcad.exe, version: 3.20.0.0, time stamp: 0x5ad07892
Faulting module name: MSVCR120.dll, version: 12.0.21005.1, time stamp: 0x524f83ff
Exception code: 0xc0000409
Fault offset: 0x000000000006dd27
Faulting process id: 0x34d0
Faulting application start time: 0x01d3dbdf73dc50d2
Faulting application path: C:\Program Files\QCAD\qcad.exe
Faulting module path: C:\Program Files\QCAD\MSVCR120.dll
Report Id: 0644b1d2-d503-4525-ab02-fc36f87288a0
Faulting package full name:
Faulting package-relative application ID:

1743QCAD (main)Bug ReportVery LowDraw > Text: Wrong bounding box for text with empty sup...Assigned
0%
1 Task Description

Hi,

I have a drawing where I use text with superscript. In this case when I use autozoom, it does not work as I expect. It includes the 0,0 coordinates too. The problem also occures when I export the drawing into svg.

I attached an example, just use the autozoom.

Thanks,
Soma


 1742 QCAD (main)Bug ReportLow File > Print: printed point size depends on zoom level Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5548

 1741 QCAD (main)Bug ReportLow Property Editor: titles of block attributes with _ cut  ...Closed
100%
Task Description

- Create block
- Add attribute with tag “MY_ATTR” - Create block reference

- Select block reference
- Block attribute of block reference shown as “ATTR”

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5544

 1739 QCAD (main)Bug ReportLow Edit Library File doesn't work Closed
100%
Task Description

The Edit Library File option in the drop-down menu when you right-click a library item does not work

 1738 QCAD (main)Bug ReportLow File > Print / PDF Export: shortcut broken in print pre ...Closed
100%
Task Description

Load drawing
Switch to print preview
Ctrl-P / XD have no effect

 1737 QCAD (main)Bug ReportMedium Block > Attributes > Define Block Attribute: broken Closed
100%
Task Description

Broken due to UI file resource not being found.

 1736 QCAD (main)Bug ReportMedium Draw > Image: broken Closed
100%
Task Description

Draw > Image broken due to UI file resource not being found.

 1735 QCAD (main)Bug ReportCritical Export to PDF doesn't work Closed
100%
Task Description

Export to PDF doesn’t work on Linux Mint 64 bit

 1734 QCAD (main)Bug ReportLow Draw > Text: Color changes for CAD font texts ignored Closed
100%
Task Description

Create text using “standard” font with color change (e.g. one letter in the middle red).

 1733 QCAD (main)Bug ReportMedium Open DXF just written by qcad crashes qcad  Closed
100%
Task Description

I am a new qcad pro user and created a simple drawing and saved as DXF R27 and closed the app. I reopen the app and open that DFX and the app crashes. However, I can import it. I suspect (without any evidence) that the text in the dimension of the drawing is the problem. Perhaps this issue is like #1261

Process: QCAD-Pro [97927]
Path: /Applications/QCAD-Pro.app/Contents/MacOS/QCAD-Pro
Identifier: org.qcad
Version: 3.19 (3.19.2)
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: QCAD-Pro [97927]
User ID: 501

Date/Time: 2018-04-11 18:07:15.937 -0700
OS Version: Mac OS X 10.12.6 (16G1314)
Report Version: 12
Anonymous UUID: 1EBA0D43-4553-C6E8-6F6A-1A9F3992052D

Sleep/Wake UUID: 86FC779B-AD43-426E-9FFA-4AFBFD6EFC8A

 1732 dxflibBug ReportLow Saving dimension with custom text position Closed
100%
Task Description

Custom text position must be written as type flag (code 70, flag 128) as well as in style overrides as codes

1070
279
1070
2
 1730 QCAD (main)Bug ReportLow Point display in a layout / print preview not correct Closed
100%
Task Description

Hi Andrew,

When placing a point in a layout it gives an incorrcet display, for example if I place a cross point style I get a rather strange shape in return!

Many thanks

Clive

 1729 QCAD (main)Bug ReportLow Wrong sizes for dimensions in blocks viewed through vie ...Closed
100%
Task Description

See also:
https://qcad.org/rsforum/viewtopic.php?f=33&t=5507

 1727 QCAD (main)Bug ReportLow Autosave - Error feedback - DXF staed but should be DWG Closed
100%
Task Description

Hi Andrew,

Just a little thing I noticed recently.

My default is set to save as DWG and indeed it does, however the auto-save feedback tells me that the file is saved to DXF, although it actually does save to DWG - no big deal but is this correct feedback?

Many thanks

Clive

 1726 QCAD (main)Bug ReportLow Layer property "for plotting" seems not working  Closed
100%
Task Description

Deaktivating “for plotting” (German “plottbar”) while editing properties of a layer seems to change nothing. I expected, that in print preview (SVG, PDF) these layers are deaktivatet too.

Deaktivating in these cases make sense as when real plotting.

 1725 QCAD (main)Bug ReportLow File > Bitmap Export: thin lines not exported Closed
100%
Task Description

Thin lines are with sub pixel widths are not visible in exported bitmaps.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=30&t=5465

 1720 QCAD (main)Bug ReportLow Modify > Auto Trim: fails for Rays and Infinite Lines Closed
100%
Task Description

... if other entities involved.

Testdrawing:
Please use the Auto Trim tool first with visible and then with invisible Block Countertop. The effect can change depending on where you click.

1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
0%
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

 1718 QCAD (main)Bug ReportVery Low File > SVG Export: selected entities exported in select ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5429

 1717 QCAD (main)Bug ReportLow small fix in startup script Closed
100%
1 Task Description

The current startup script fails when called through symbolic link due to string:

DIR=${0%/*}

It is better to change it to:

DIR=$(dirname -- $(readlink -f -- $0))
 1716 TranslationBug ReportLow Wrong plural forms in translations Closed
100%
1 Task Description

I found that words which has plural forms are translated in manner where only two forms are possible - like in English language. For example: “Object” and “Objects”. But other languages (for example Polish) very often have more than 2 plural forms.
There are also strings which use only one form (for example: “Reset label position of %1 dimension(s).”) but cardinal number placed in string point on more forms than one.
All these strings looks bad when translated and sometimes even in English. I mark most of them using comments:

http://translate.qcad.org/pl/qcad/translate/#search=plural&sfields=notes

http://translate.qcad.org/pl/qcadpro/translate/#search=plural&sfields=notes

http://translate.qcad.org/pl/qcadcam/translate/#search=plural&sfields=notes

I believe problem can be fixed using plural form strings: https://www.gnu.org/software/gettext/manual/html_node/Plural-forms.html

 1715 QCAD (main)Bug ReportLow Print option "Auto fit pages to drawing" broken Closed
100%
Task Description

Print option “Auto fit pages to drawing” broken.

 1712 dwg2pdfBug ReportLow dwg2pdf: auto fit fails for blocks Closed
100%
Task Description

Autofit (-a) has no effect when converting a block or layout block (other than Model_Space).

 1711 QCAD (main)Bug ReportLow Error at copy with refpoint and paste, result is mirror ...Closed
100%
Task Description

QCAD V3.19
Error at copy with ref point and paste

Look at the video

for testing
I made a litte drawing, then select all
then make copy with refpoint, set refpoint
then insert it

Result: the copy is mirrored and with factor 1.2 greater then original

 1710 TranslationBug ReportLow Lack of translations for close dialog using Ubuntu Closed
100%
Task Description

Using Ubuntu GNOME, there are some untranslatable buttons strings on close file dialog. Screenshot attached.

 1707 QCAD (main)Bug ReportLow Dimension text size and arrow for imported drawings, wa ...Closed
100%
Task Description

A nasty bug that I posted some time in the forum that prevents QCAD to read properly the content block associated with dimension.

Here’s what is happening:
- every dimension entity in DXF/DWG is stored with a block representing its contents (or in fact, anything else)
- QCAD ignores that block and instead renders the dimension using the various sizes and properties of the dimension

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5133

 1706 QCAD (main)Bug ReportLow Grid line mask drawing lines Closed
100%
Task Description

After changing the colours of the grid points and grid lines I noticed that when I draw a line exactly over a grid line the grid line masks the drawing line. When zoomed in the lines disappear all together. Please see attached images.

 1704 QCAD (main)Bug ReportLow Wrong labels for information area buttons Closed
100%
Task Description

In Information → Arc/circle/ellipse area tool labels for Area of sector and Area of segment buttons are switched.

 1703 QCAD (main)Bug ReportLow File > Bitmap Export: Monochrome with black background  ...Closed
100%
Task Description

Exporting a monochrome bitmap with black background produces a black bitmap.

Affects File > Bitmap Export and dwg2bmp.

 1696 QCAD (main)Bug ReportLow Modify > Isometric Projection > Cylindrical: exception Closed
100%
Task Description

Modify > Isometric Projection > Cylindrical throws exception / broken.

 1695 QCAD (main)Bug ReportLow Context menu: editing tools not working in paper space Closed
100%
2 Task Description

Tools not working from context menu in paper space.

Showing tasks 1 - 50 of 1768 Page 1 of 361 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing