QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
512QCAD (main)Feature RequestLowModify stretch and Restrict orthoAssigned
0%
1 Task Description

The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.

So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?

598QCAD (main)Feature RequestLowSupport tangents between ellipsesAssigned
0%
1 Task Description

To add support for drawing tangents between ellipses.

See topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003

 599 QCAD (main)Bug ReportLow Line tangent to ellipse with start point on minor axis Closed
100%
1 Task Description

Line tangent to ellipse with start point on the minor axis of the ellipse produces wrong result.

609QCAD (main)Feature RequestLowClean up toolAssigned
0%
1 Task Description

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

612QCAD (main)Feature RequestLowPlot math functionsAssigned
0%
1 Task Description

Input:

  1. X axis min/max or choose line (?) or center (for polar functions)
  2. function: y = f(x) / polar function: r = f(a)

Output:

  1. function plot
617QCAD (main)Feature RequestLowDifferent dimensions font sizes in the same drawing.Assigned
0%
1 Task Description

Different dimensions font sizes in the same drawing.

625QCAD (main)Feature RequestLowDistribute block along spline, polyline, ...Assigned
0%
1 Task Description

See:
http://www.youtube.com/watch?v=27bCgg3zLVA

638QCAD (main)Feature RequestLowFeature request- text find/replace functionAssigned
0%
1 Task Description

Feature request- text string find/replace

Scope: entire drawing/selected objects set/chosenlayer only

Functionality:

‘find’ with ‘zoom to’, first, next, previous, last

‘replace’ with ‘next’, ‘undo’, ‘all’

This functionality is very useful when using QCad for system diagrams and the like.

 652 QCAD (main)Bug ReportLow Arbitrary options toolbar height Closed
100%
1 Task Description

See:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=2099

661QCAD (main)Feature RequestLowAdd support for the DGN formatAssigned
0%
1 Task Description

See OpenDesign news:
“ODA consolidates support for .dgn and .dwg file formats in Teigha”

675QCAD (main)Feature RequestLowOption for fixed Text and Dimension heights ...Assigned
0%
1 Task Description

I think it would be nice to have the possibility to decide a fixed Text and Dimension (inclusive Arrows) height what is not affected by the Print scale. That means: If I have a given height of 3,5mm it will always be printed with 3,5mm - no matter what the scale for the printing is.
Yes, I see also the problem that I could run in space problems after I twitch to the Print preview - but that will also happen when I change the Text hight in the preferences for a 5:1 printing.
Maybe this Feature Request doesn’t looks important if you are usually working with Metric Units but if you have to handle Imperial Units then it is a pain in the back to make always the calculation to get the same heights.
Try it by your self; 3,5mm = 0.137795” = 1”:1” Now I like to print it in 1”:256” ops - to small - ok 1”:64” ... no, to big, maybe 1”:128” .......and QCad can’t remember the previously numbers. ;-)

 677 QCAD (main)Bug ReportLow Incorrect rendering of the drawings with the dwg2pdf to ...Closed
100%
1 Task Description

Incorrect rendered faltering types of lines with the dwg2pdf tool.
Some of them: “DOT”, “DOT2”, “CENTER2”, “BORDER2”, “DASHDOT2”, “DIVIDE2”, “DASHED2” and others.
Lines are drawn by the “compressed”.
But when exporting through the menu “File” → “PDF Export”, lines are drawn as expected!
I attach two files as an example.

P.S.
Excuse me and “Google Translate” for my English :)

680QCAD (main)Feature RequestLowAdditional Export function for Sketchup etc. ....Assigned
0%
1 Task Description

Additional Export function for export/import into 3D Programs like Sketchup etc. (file types like .dae, .3ds, .ddf, .skp).

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2176

681QCAD (main)Feature RequestLow'Plug-in' for Gear generatorAssigned
0%
1 Task Description

Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc...
To produce 2D templates for all sorts of projects.

720QCAD (main)Feature RequestLowLocked Blocks ....Assigned
0%
1 Task Description

It is nice that I can scale or rotate a block - but right now I see also a big plus in a kind of locking function for Blocks.
It would be nice to have a “locked” option ad least for the scaling of blocks.

Example: Think about Clives “Radiator ‘Cover’ screen” http://www.qcad.org/rsforum/viewtopic.php?f=51&t=2060 and how you could manipulate this screen with “scale blocked blocks” ;-)

728QCAD (main)Performance IssueLowSlow loading of drawing with many block insertsAssigned
0%
1 Task Description

Slow loading of drawing with huge number of block inserts (more than 10000).

 731 QCAD (main)Bug ReportLow Break out segment: fails in some cases Closed
100%
1 Task Description

See fs731.dxf

 732 QCAD (main)Bug ReportLow Text Control Info is displayed in Drawing when imported ...Closed
100%
1 Task Description

May relate to 646.

Control Text is Displayed on Drawing created in ACAD.
The Text is representing /p as a new line when I think it should be ignored.
See QCAD PDF I am unsure what this represents in ACAD. /pxqc;

V3.0.0 Windows 7 64-bit

741QCAD (main)Feature RequestLowAn additional Radius Measurement tool ...Assigned
0%
1 Task Description

It would be nice to have an additional Radius Measurement tool with short leads. The current Radius tool shows always the lead line to the center of the radius what is in many cases not useful.

I’m not asking for a workaround ;-)

756QCAD (main)Bug ReportLowDisplay problem in the Text "Character Map" ...Assigned
0%
1 Task Description

XP/32

Go to:
Text → Special Characters → Others → “Character Map” pops up.
Adjust Zoom to 100% = display problem (not enough space for the single character.

 773 QCAD (main)Feature RequestLow Line - Relative Angle / Orthogonal: Reference Point opt ...Closed
100%
1 Task Description

Reference Point options (Start, middle, end) also for “Relative angle” and “Orthogonal” .... like the other lines ;-)

775QCAD (main)Feature RequestLowNote book tool for QCADAssigned
0%
1 Task Description

It would be really cool to have a Note book tool for QCAD!

For example I am often working on a draft and at the same time scribbling notes down on a separate piece of paper relating to the drawing I am working on, could be anything e.g. add a block,add a dimension etc. etc... all sorts of things to remind myself about - all related to a particular drawing.

Of course I could use any number of other programs for this but a simple dedicated tool inside QCAD (could be called the ‘QCAD scribbler ;)) would be much better, especially one that can save the notes to a particular file, then when I open up my drawing again - my notes are there too!

776QCAD (main)Feature RequestLowExtra ' isometric' buttons for using Line from Angle.Assigned
0%
1 Task Description

When working with the isometric grid (in any projection - Top, Right, Left) and drawing from ‘scratch’ as it were, without using the projection tools - I find myself using ‘Line from Angle’ the most.

It would be extreamly useful to be presented with two extra buttons when using this tool, a 30 degree button and a -30 degree button, this way I wouldn’t need to keep typing in the angle difference here.

Regards

Clive

786QCAD (main)Feature RequestLowMulti - Breakout toolAssigned
0%
1 Task Description

A ' Multi ' Breakout tool or added option to the existing Breakout tool.

For example see attached image.

An option to remove all segments within a chosen boundary would be good, in my example I want to remove all the hatching within the Red circle.

So after exploding the Hatch, currently I have to remove all segments singularly!

Of course I could have placed the circle first and hatched around it - but in this and most instances it is easier to design and to produce the Hatching first and then place my circle/shapes etc.

788QCAD (main)Feature RequestLowExtra option to detect duplicates only in user defined ...Assigned
0%
1 Task Description

It would be very useful to have an extra option to only detect duplicates within a user defined area.

789QCAD (main)Feature RequestLowScale tool - mouse-pointer - inversely proportional sca...Assigned
0%
1 Task Description

3.0.8.
Bug Report or Feature Request ..... I’m not sure!

If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale.
x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...

 796 QCAD (main)Bug ReportLow Pasting to current layer results in empty layers being  ...Closed
100%
1 Task Description

Initial situation:
A drawing with two visible layers: One for the outline and one for hidden lines.
A second empty drawing with the standard 0 layer.

The bug:
When copying the objects from the first drawing and pasting them to the current layer of the second drawing, both layers present in the first drawing are created and are empty. I suppose that’s not the way it was intended. I expected the selected objects being pasted to the current layer and NO extra layers being created.

798QCAD (main)Feature RequestLowelaborate on purge toolAssigned
0%
1 Task Description

Modify the “purge layer” tool to preserve empty layers with a locked status.
see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386

 800 QCAD (main)Feature RequestLow Configurable auto snap Closed
100%
1 Task Description

Enable / disable individual snaps for use with auto snap.

 809 QCAD (main)Bug ReportLow Hatch modifications and undo Closed
100%
1 Task Description

- Draw ellipse
- Fill ellipse (solid or hatch)
- Rotate ellipse and filling
- Undo

→ Angle of ellipse shaped fill is not undone.

Other hatch boundary elements that break or cannot be undone:
- splines from fit points
- arcs (when only one point is moved, e.g. stretch)
- circles (when radius changes, e.g. scale, position changes)
- ellipses (when major point changes)

817QCAD (main)Feature RequestLowSnap and cut all intersection in a given area tool ...Assigned
0%
1 Task Description

As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch.
To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries.
The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....

Clive mentioned on this:
Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.

823QCAD (main)Feature RequestLowAdd Midpoint Handles to Lines and PolylinesAssigned
0%
1 Task Description

The Midpoint Handles should be used to move Polyline Segments and lines. This would add easy to access stretch functionality.
Combined with a shortcut(hold down shift or alt etc.) to fix the movement to be orthogonal to the line this would bring a lot of extra value.
It would also be possible to to have another shortcut to easily insert nodes to Polylines (again hold shift or alt etc.)

839QCAD (main)Feature RequestLowGrid / Meta Grid info + Drawing Unit Info ...Assigned
0%
1 Task Description

At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings.
It would be nice to have additional the Info for the drawing unit ...

 840 QCAD (main)Feature RequestLow File > New from Template: Remember last used folder Closed
100%
1 Task Description

Task:
Drawing - New from Template ...

My Default Template Folder in “Application Preferences” is on F: (USB Port).
QCAD depicts to C:/Programme/QCAD pro 3.1.2/libraries/templates
(Yes - I started QCAD new after adjusting the default Folder)

849QCAD (main)Feature RequestLowMake maximum visible reference points of selection conf...Assigned
0%
1 Task Description

Provide configuration option to raise / lower maximum reference points that are shown for selected entities (currently fixed to 1000).

Original report:

Imported a spline-dxf from adobe illustrator. Converted the spline to polyline with explode command. Then no anchor points / vertex points / vertices were showing anymore. Simplified the polyline so that it had less than 1000 points. Vertices became visible.

I think some freeform objects need actually more than 1000 vertices. Also them need to be edited. Please increase the amount of vertices showing to biginteger

regards

Benjamin

853QCAD (main)Feature RequestLowKeep selection after undo ...Assigned
0%
1 Task Description

If I move something and it went wrong I can easily undo the last move and start over without the need of a re-selection.
If I copy something and it went wrong I can undo the last copy but I have to re-select everything again.

It would be nice to keep the once chosen selection in both “undo” situation!

Same with similar functions like rotate etc. ....

860QCAD (main)Feature RequestLow"Create Library item from selection" default Path ...Assigned
0%
1 Task Description

Default Path for “Create Library item from selection” / “Save us” is C:\Programme\QCAD pro 3.1.6 ...
... regardless of the settings in the “Application Preferences / Library Browser / for Library Sources.
And QCAD doesn’t remember the last path choice ....

If I have to save 50 Library Items I have to navigate 50 times thru my system to find - the same place.

It would be nice if QCAD would point in first place to the Library Source or, at least, remember the last used path ... ;-)

 877 QCAD (main)Bug ReportLow Patches to build QCAD 3.2.0.0 on FreeBSD Closed
100%
1 Task Description

Hello,

The attached patches are used to build QCAD on FreeBSD.

Notes:

- patch-shared_app.pri adds a dependency to libexecinfo. It is marked as fixed in  FS#876 , but still there.

It could be useful also for the other BSDs.

- patch-src_3rdparty_opennurbs_opennurbs_system.h remove malloc.h. It is marked as fixed in  FS#875 , but still there.

- patch-src_3rdparty_3rdparty.pro, patch-src_core_core.pro, patch-src_core_math_RSpline.h and patch-src_entity_entity.pro allow to use opennurbs as a dependency from the ports system, which is the recommended method, but you may ignore them in the general distribution sources if you prefer.

- patch-src_core_RSettings.cpp is specific to the ports system (”/usr/local/share/qcad” is not really hardcoded, and modified according to $PREFIX at build time): you may ignore it if you want.

Best regards,

Th. Thomas

894QCAD (main)Feature RequestLowModify - Clip to Rectangle: copy area to clipboardAssigned
0%
1 Task Description

New mode for clip to rectangle: copy contents of rectangular area to clipboard.

908QCAD (main)Feature RequestLowLibrary Browser Block Delete FunctionAssigned
0%
1 Task Description

It would be very helpful if the library browser had a delete function.

I know that this can be very risky for some people, but it is the easiest
way to see clearly what you delete.

Regards
Henry

923QCAD (main)Feature RequestLowDiagramming (Intelligent Orthogonal Connectors)Assigned
0%
1 Task Description

Hi,

With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.

 926 QCAD (main)Feature RequestLow Splines: break up at point Closed
100%
1 Task Description

Break up spline at given point, break out segment, etc.

927QCAD (main)Feature RequestLowFurther options for the 'Add Measurement' toolsAssigned
0%
1 Task Description

Absolutely love the new options for adding the measurements in the current drawing.

I would like to see an additional option for only adding the text and not the lines also, maybe a simple check box would suffice here.

Of course at the moment I am able to use the property editor to select only the lines and move to a new layer and hide!

928QCAD (main)TaskLowCXF font editingAssigned
0%
1 Task Description

Port CXF font editor to QCAD 3.
- Load CXF fonts (load glyphs into blocks)
- Save back to CXF format

 940 QCAD (main)Feature RequestLow Automatically change fonts in a drawing Closed
100%
1 Task Description

Apply a font name replacement table to a drawing. E.g. change font ‘romanc’ to ‘Arial’, etc.

 947 QCAD (main)Bug ReportLow Debug builds failing (Linux/FreeBSD) Closed
100%
1 Task Description

6a5c66 on both FreeBSD and Linux (particular example on FreeBSD). The following diff is present, but it should be a no-op in this regard:

--- a/shared.pri
+++ b/shared.pri
@@ -11,6 +11,7 @@ DEFINES += QCAD_DLL
 # output directory:
 CONFIG(debug, debug|release) {
     ROUTDIR = debug
+    QMAKE_CXXFLAGS_DEBUG += -ggdb3
 } else {
     ROUTDIR = release
 }
qmake-qt4 qcad.pro CONFIG=debug

Goes on a while, then bombs off at

g++ -c -pipe -g -ggdb3 -Wall -W -fPIC -DQCAD_DLL -DPTHREADS -DHAVE_PTHREAD_H
    -I/usr/local/share/qt4/mkspecs/freebsd-g++
    -I.
    -I/usr/local/include/qt4/QtHelp
    -I/usr/local/include/qt4/QtDesigner
    -I/usr/local/include/qt4/QtUiTools
    -I../../../../core
    -I../../../../core/math
    -I../../../../grid
    -I../../../../snap
    -I../../../../gui
    -I../../../../entity
    -I../../../../operations
    -I../../../../scripting
    -I../../../../stemmer
    -I../../../../scripting/ecmaapi
    -I../../../../scripting/ecmaapi/generated
    -I../../../../scripting/ecmaapi/adapters
    -I../../../../io/dxf
    -I../../../../spatialindex
    -I../../../../3rdparty
    -I.
    -I/usr/local/include/qt4
    -I/usr/local/include
    -o debug/qtscript_Global.o
    ../../generated_cpp/com_trolltech_qt_core/qtscript_Global.cpp

../../generated_cpp/com_trolltech_qt_core/qtscript_Global.cpp:6:25: error: qmetaobject.h: No such file or directory
../../generated_cpp/com_trolltech_qt_core/qtscript_Global.cpp:8:20: error: QVariant: No such file or directory
../../generated_cpp/com_trolltech_qt_core/qtscript_Global.cpp:10:21: error: qglobal.h: No such file or directory

The corresponding good release compile line is:

g++ -c -pipe -O2 -Wall -W -pthread -D_THREAD_SAFE -fPIC -DQCAD_DLL
    -DPTHREADS -DHAVE_PTHREAD_H -DQT_NO_DEBUG -DQT_WEBKIT_LIB
    -DQT_SCRIPT_LIB -DQT_SCRIPTTOOLS_LIB -DQT_SVG_LIB -DQT_SQL_LIB
    -DQT_XMLPATTERNS_LIB -DQT_XML_LIB -DQT_OPENGL_LIB -DQT_GUI_LIB
    -DQT_NETWORK_LIB -DQT_CORE_LIB -DQT_SHARED
    -I/usr/local/share/qt4/mkspecs/freebsd-g++
    -I.
    -I/usr/local/include/qt4/QtHelp
    -I/usr/local/include/qt4/QtDesigner
    -I/usr/local/include/qt4/QtUiTools
    -I/usr/local/include/qt4/QtCore
    -I/usr/local/include/qt4/QtNetwork
    -I/usr/local/include/qt4/QtGui
    -I/usr/local/include/qt4/QtOpenGL
    -I/usr/local/include/qt4/QtXml
    -I/usr/local/include/qt4/QtXmlPatterns
    -I/usr/local/include/qt4/QtSql
    -I/usr/local/include/qt4/QtSvg
    -I/usr/local/include/qt4/QtScriptTools
    -I/usr/local/include/qt4/QtScript
    -I/usr/local/include/qt4/QtWebKit
    -I/usr/local/include/qt4
    -I../../../../core
    -I../../../../core/math
    -I../../../../grid
    -I../../../../snap
    -I../../../../gui
    -I../../../../entity
    -I../../../../operations
    -I../../../../scripting
    -I../../../../stemmer
    -I../../../../scripting/ecmaapi
    -I../../../../scripting/ecmaapi/generated
    -I../../../../scripting/ecmaapi/adapters
    -I../../../../io/dxf
    -I../../../../spatialindex
    -I../../../../3rdparty
    -I.
    -I/usr/local/include
    -Irelease
    -I/usr/local/include/qt4
    -I/usr/local/include
    -o release/qtscript_Global.o
    ../../generated_cpp/com_trolltech_qt_core/qtscript_Global.cpp

The diff between them is suspiciously big (unique items only):

includes-wise:

--- incbad      2013-10-20 11:45:37.302711863 +0200
+++ incgood     2013-10-20 11:45:31.899711566 +0200
@@ -16,7 +16,19 @@
 -I../../../../stemmer
 -I/usr/local/include
 -I/usr/local/include/qt4
+-I/usr/local/include/qt4/QtCore
 -I/usr/local/include/qt4/QtDesigner
+-I/usr/local/include/qt4/QtGui
 -I/usr/local/include/qt4/QtHelp
+-I/usr/local/include/qt4/QtNetwork
+-I/usr/local/include/qt4/QtOpenGL
+-I/usr/local/include/qt4/QtScript
+-I/usr/local/include/qt4/QtScriptTools
+-I/usr/local/include/qt4/QtSql
+-I/usr/local/include/qt4/QtSvg
 -I/usr/local/include/qt4/QtUiTools
+-I/usr/local/include/qt4/QtWebKit
+-I/usr/local/include/qt4/QtXml
+-I/usr/local/include/qt4/QtXmlPatterns
 -I/usr/local/share/qt4/mkspecs/freebsd-g++
+-Irelease

Defines-wise:

--- defbad      2013-10-20 11:51:22.405716122 +0200
+++ defgood     2013-10-20 11:52:05.362693170 +0200
@@ -1,3 +1,17 @@
 -DHAVE_PTHREAD_H
 -DPTHREADS
 -DQCAD_DLL
+-DQT_CORE_LIB
+-DQT_GUI_LIB
+-DQT_NETWORK_LIB
+-DQT_NO_DEBUG
+-DQT_OPENGL_LIB
+-DQT_SCRIPTTOOLS_LIB
+-DQT_SCRIPT_LIB
+-DQT_SHARED
+-DQT_SQL_LIB
+-DQT_SVG_LIB
+-DQT_WEBKIT_LIB
+-DQT_XMLPATTERNS_LIB
+-DQT_XML_LIB
+-D_THREAD_SAFE

qmetaobject.h is on Qt/ and QtCore/, both of which is missing from the debug include path.

On Linux, it’s complaining about QtScript/QScriptExtensionPlugin (which is in /usr/include/qt4), diffs between includes:

--- incbad      2013-10-20 12:04:32.612710645 +0200
+++ incgood     2013-10-20 12:04:58.129714235 +0200
@@ -14,7 +14,21 @@
 -I../../../../snap
 -I../../../../spatialindex
 -I../../../../stemmer
+-I/usr/X11R6/include
+-I/usr/include/qt4
+-I/usr/include/qt4/QtCore
 -I/usr/include/qt4/QtDesigner
+-I/usr/include/qt4/QtGui
 -I/usr/include/qt4/QtHelp
+-I/usr/include/qt4/QtNetwork
+-I/usr/include/qt4/QtOpenGL
+-I/usr/include/qt4/QtScript
+-I/usr/include/qt4/QtScriptTools
+-I/usr/include/qt4/QtSql
+-I/usr/include/qt4/QtSvg
 -I/usr/include/qt4/QtUiTools
+-I/usr/include/qt4/QtWebKit
+-I/usr/include/qt4/QtXml
+-I/usr/include/qt4/QtXmlPatterns
 -I/usr/share/qt4/mkspecs/linux-g++-64
+-Irelease

Defines:

--- defbad      2013-10-20 12:07:16.961712166 +0200
+++ defgood     2013-10-20 12:07:38.831670098 +0200
@@ -1,4 +1,18 @@
 -DHAVE_PTHREAD_H
 -DPTHREADS
 -DQCAD_DLL
+-DQT_CORE_LIB
+-DQT_GUI_LIB
+-DQT_NETWORK_LIB
+-DQT_NO_DEBUG
+-DQT_OPENGL_LIB
+-DQT_SCRIPTTOOLS_LIB
+-DQT_SCRIPT_LIB
+-DQT_SHARED
+-DQT_SQL_LIB
+-DQT_SVG_LIB
 -DQT_WEBKIT
+-DQT_WEBKIT_LIB
+-DQT_XMLPATTERNS_LIB
+-DQT_XML_LIB
+-D_REENTRANT
 959 QCAD (main)Bug ReportLow Trimming two lines which already meet causes both to di ...Closed
100%
1 Task Description

If I “Trim Both” a pair of lines which already meet, then neither line changes appearance on screen (as expected). However, after saving and reloading the file, both lines are now missing.

To reproduce:

  1. Create a new drawing
  2. Draw a 10×10 square
  3. Save the drawing
  4. Close and reopen. The square shows up as expected.
  5. Use the Trim Both tool on a pair of lines meeting at one of the corners. No change in the display.
  6. Save the drawing
  7. Close and reopen. The lines used in step 5. have disappeared.

If one or both of the lines changes length, either lengthened or shortened, then the changed line is preserved.

Build information:

Version: 3.4.2.0 (3.4.2)
Build Date: Oct 25 2013
Qt Version: 4.7.4
Compiler: MSVC++ 10.0 (2010)

Running on Windows 7 64-bit.

962QCAD (main)Feature RequestLowDefault save / open directoriesAssigned
0%
1 Task Description

Add the option to use a fixed path for the save to, open and CAM export directories.

(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)

 981 QCAD (main)Feature RequestLow New tool: Ellipse - Equidistant Closed
100%
1 Task Description

Bug or Feature request?

Tool “Parallel” is not working on an intact ellipse. If I explode the ellipse it will work but then it turns out to a Sisyphus task ... ;-)

986QCAD (main)Feature RequestLowDetect duplicates - only on selected areaAssigned
0%
1 Task Description

It would be useful to have an additional option to only detect duplicates on user defined selection of drawing.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145

Showing tasks 101 - 150 of 1836 Page 3 of 37 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing