|
533 | QCAD (main) | Feature Request | Low | Kopierendes/Ausschneidendes Rechteck (Kreis) Werkzeug . ... | Closed | |
|
Task Description
In meiner Vergangenheit habe ich in anderen CAD Programmen mit folgendem Werkzeug gearbeitet was ich für Detailansichten, Bereinigungen oder ähnliches extrem Hilfreich empfand. Wäre schön wenn es so etwas auch in QCad gebe.
Werkzeug: Man zieht ein Rechteck (oder Kreis) über einen gezeichneten Bereich auf. Alles was innerhalb oder außerhalb des Rechtecks liegt wird kopiert/ausgeschnitten/gelöscht und auch direkt an den Linienkanten des auswählenden Rechtecks geschnitten.
Momentan kann ich ein Rechteck für Selektion bestimmen - muss aber dann nach einer Kopie alles manuell trimmen, löschen etc. um nur den gewünschten Rechteckinhalt zu bekommen ...
|
|
1797 | QCAD (main) | Bug Report | Low | Keyboard shortcuts not saved between sessions | Closed | |
|
Task Description
In 3.21.1, and 3.21.2 a change to a shortcut looses all previous shortcut changes. This does not become apparent in the current session; a modified shortcut works fine together with all the previous modifications, until you close QCAD. But- When you re-open QCAD, the only customised shortcut available is the last one that was changed, every other customised keyboard shortcut has gone back to default.
Windows 10 64 , Gigabyte laptop i7 processor
|
|
2306 | QCAD (main) | Bug Report | Low | Keyboard setting is incorrect | Closed | |
|
Task Description
I am using QCAD/CAM version. Since I installed this version of QCAD that I bought recently, I have a problem with the keyboard settings. On the QCAD application, the keyboard is set to English, while it is set as Swiss French on the system level.
System: Host: manjaro Kernel: 5.10.70-1-MANJARO x86_64 bits: 64 Desktop: GNOME 40.5 Distro: Manjaro Linux Machine: Type: Laptop System: Hewlett-Packard product: HP EliteBook 8470p v: A1009D12 serial: <superuser required>
Mobo: Hewlett-Packard model: 179B v: KBC Version 42.38 serial: <superuser required> BIOS: Hewlett-Packard
v: 68ICF Ver. F.65 date: 08/11/2016
Battery: ID-1: BAT0 charge: 40.1 Wh (100.0%) condition: 40.1/40.1 Wh (100.0%) CPU: Info: Dual Core model: Intel Core i5-3320M bits: 64 type: MT MCP cache: L2: 3 MiB
Speed: 1261 MHz min/max: 1200/3300 MHz Core speeds (MHz): 1: 1261 2: 1215 3: 1533 4: 1201
Graphics: Device-1: Intel 3rd Gen Core processor Graphics driver: i915 v: kernel
Device-2: Primax HP HD Webcam [Fixed] type: USB driver: uvcvideo
Display: wayland server: X.Org 1.21.1.2 driver: loaded: modesetting resolution: 1: 1366x768~60Hz 2: 2560x1440~60Hz
OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2) v: 4.2 Mesa 21.2.3
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio driver: snd_hda_intel
Sound Server-1: ALSA v: k5.10.70-1-MANJARO running: yes
Sound Server-2: PulseAudio v: 15.0 running: yes
Network: Device-1: Intel 82579LM Gigabit Network driver: e1000e
IF: enp0s25 state: up speed: 1000 Mbps duplex: full mac: a0:b3:cc:22:b0:bf
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi
IF: wlo1 state: up mac: 8c:70:5a:6b:30:10
Bluetooth: Device-1: Broadcom HP Portable SoftSailing type: USB driver: btusb
Report: rfkill ID: hci0 state: up address: see --recommends
Drives: Local Storage: total: 238.47 GiB used: 103.47 GiB (43.4%)
ID-1: /dev/sda vendor: Samsung model: SSD 840 PRO Series size: 238.47 GiB
Partition: ID-1: / size: 233.72 GiB used: 103.47 GiB (44.3%) fs: ext4 dev: /dev/sda1 Swap: Alert: No swap data was found. Sensors: System Temperatures: cpu: 40.0 C mobo: 0.0 C
Fan Speeds (RPM): N/A
Info: Processes: 234 Uptime: 2h 42m Memory: 7.64 GiB used: 3.95 GiB (51.8%) Shell: Zsh inxi: 3.3.08
locale LANG=en_US.utf8 LC_CTYPE=”en_US.utf8” LC_NUMERIC=”en_US.utf8” LC_TIME=”en_US.utf8” LC_COLLATE=”en_US.utf8” LC_MONETARY=”en_US.utf8” LC_MESSAGES=”en_US.utf8” LC_PAPER=”en_US.utf8” LC_NAME=”en_US.utf8” LC_ADDRESS=”en_US.utf8” LC_TELEPHONE=”en_US.utf8” LC_MEASUREMENT=”en_US.utf8” LC_IDENTIFICATION=”en_US.utf8” LC_ALL=
localectl status
System Locale: LANG=fr_CH.UTF-8
VC Keymap: fr_CH
X11 Layout: ch
X11 Model: pc105
X11 Variant: fr
|
|
356 | QCAD (main) | Bug Report | High | Javascript exception: any time user double clicks on te ... | Closed | |
|
Task Description
Javascript exception
Any time user double clicks on text, an exception is raised in the following script:
/qcad-3.0.0-rc1-prof-linux/scripts/Draw/Text/TextDialog/TextDialog.js
Fix is to comment out the line
//bug.... simpleText.checked = textDataIn.isSimple();
|
|
1057 | Translation | Task | Low | Japanese translation missing in a couple spots .... | Closed | |
|
Task Description
Is the Japanese translation still in progress or is this a update Problem?
|
|
1568 | QCAD (main) | Bug Report | Low | Issues: Snaps, Trim, Green selection tool | Closed | |
|
Task Description
Hello,
There is some issues with the snap tool and the selection tool.The trim button only trims some lines but not all.
1. The snap tool does not let me snap to certain things when i select something. For example i will select a box and i will try to extend the corner to another entities corner but the snap is not there so its free and thus not accurate.
2. For some reason the selection tool does not allow me to select certain things. If i have two boxes overlapping and i use the selection tool (from right to left “green selection box”) it does not allow me to select what i want i have to actually click it. This is annoying when it comes to selecting specific things.
3. The trim tool does not work properly.If i want to trim the inside of a cross hair or such, it only allows me to trim the inside of one line and if i try to trim the other it deletes the complete line.
Please fix as soon as possible. Thanks
|
|
1692 | QCAD (main) | Bug Report | Very Low | Issue with Layouts. "Viewport" enteties are not highlig ... | Closed | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Linux Mint
Case: 1. Open some drawing with viewport entities on layout block (paper scace). Print Preview mode is “On” automatically. 2. Switch to “Black/White Mode” from toolbar and move cursor on “Viewport” enteties. This entitie is not highlighted. With other enteties all works as expected. In “Full Color Mode” and “Grayscale Mode” no problems.
For example can try on “flange.dxf”
|
|
1691 | QCAD (main) | Bug Report | Very Low | Issue with Layouts after "File-Revert" | Assigned | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically. 2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .
For example can try on “flange.dxf”
|
|
1690 | QCAD (main) | Bug Report | Low | Issue with Layers | Closed | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. We have drawing with hierarchical layers. 2. When try for example to lock all layers from “Layer List Widget” by clicking to “Toggle lock” at Parent Layer. Then locked are all layers in this group. Same is with “Toggle snappable”, “Toggle plottable”, “Toggle frozen”. All works as expected. But “Toggle visibility” works only on this one parent layer.
|
|
1689 | QCAD (main) | Bug Report | Low | Issue with Block Attributes | Closed | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. Create some block with attributes. 2. Insert this bock into “Model Space” or “Paper Space”. 3. Edit this block. Rename some Attribute names (tag, prompt). 4. And when in “Model Space” or “Paper Space” Synchronize Attributes, we have in properties old and new attributes.
|
|
447 | QCAD (main) | Bug Report | High | Issue opening/saving files | Closed | |
|
Task Description
I’m not able to open or save a file using the open/save file dialog. When I change the Look in: directory nothing happens. Even when I click on My Computer or Chris.
The same applies to saving files.
Regards,
Chris
|
|
498 | QCAD (main) | Bug Report | Low | issue importing from Autocad | Assigned | |
|
Task Description
There is an issue importing from Autocad: lines and quotes (both arrows and text) appear too much big (see attachment). I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick. Autocad’s dxf are opened with right line thickness but wrong quotes. Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.
|
|
152 | QCAD (main) | Bug Report | Low | IsoProject uncaught exception | Closed | |
|
Task Description
draw circle
modify → iso projection
Uncaught exception at scripts/Modify/IsoProject/IsoProject.js:140: TypeError: Result of expression 'shape.approximateWithLines' [undefined] is not a function.
140 var pl = shape.approximateWithLines(this.segmentLength);
|
|
714 | QCAD (main) | Bug Report | Low | Isometric view tool bar doesn`t remain ' docked'. | Assigned | |
|
Task Description
Win 7 - 64 Isometric view tool bar doesn`t remain ' docked’ when re-opening QCAD.
|
|
1095 | QCAD (main) | Bug Report | Low | Isometric projection: Projection uses application prefe ... | Closed | |
|
Task Description
QCAD start, Application Preferences: Units: inch Dim: Fractions
Changed the Drawing Preferences to: Units: mm Dim: Decimal
Design a Dim and it will be created with the mm/Deci settings - as expected,
Select now the Dim - activate the ISO Tool - the try to determine the reference point fails / it’s way of the clicked point and now the produced ISO Projection will use the attributes for DIM’s from the “Application Preferences” setting - hmmmmmmm, not as expected
|
|
1084 | QCAD (main) | Bug Report | Low | Isometric projection: layers disappear from layer list | Closed | |
|
Task Description
see below:
http://www.qcad.org/rsforum/viewtopic.php?f=33&t=3009
|
|
935 | QCAD (main) | Bug Report | Low | Isometric projection: crash when projecting complex tex ... | Closed | |
|
Task Description
Projecting text into an isometric plane crashes QCAD - unless the text is first exploded, which is not always an acceptable appearance.
|
|
870 | QCAD (main) | Bug Report | Low | Isometric projection of text creates unwanted bounding ... | Closed | |
|
Task Description
If I use the isometric tools for a text QCAD will keep a construction Box as a leftover ...
|
|
156 | QCAD (main) | Bug Report | Medium | Isometric Projection fails for arc | Closed | |
|
Task Description
'shape.approximateWithLines'"0xc436c88" |
|
980 | QCAD (main) | Bug Report | Low | Isometric Projection / blocks / wrong layer are used in... | Assigned | |
|
Task Description
Isometric Projection used on a selection which contains blocks will mix up the layer affiliations. No blocks - no problems
|
|
1035 | QCAD (main) | Bug Report | Low | Isometric Projection (Cylindrical) - draws to wrong lay ... | Closed | |
|
Task Description
When using the ‘Cylindrical’ isometric tool, the projection does not draw to pre-selected layer in the layer list. This is only achieved when changing the layer in the property editor first. Have not tested this with other projection tools.
|
|
136 | QCAD (main) | Task | Low | Isometric projection | Closed | |
|
Task Description
Implement isometric projection tool
|
|
771 | QCAD (main) | Bug Report | Low | Isometric grid: spacing not updated | Closed | |
|
Task Description
The spacing of the isometric grid is not updated correctly, if the grid spacing is not set to ‘auto’ but fixed values and the isometric grid is switched on using the menu or tool bars: - Set grid to orthogonal grid, spacing fixed: 1/1 - Set meta grid to orthogonal grid, spacing fixed: 10/10 - Switch to isometric grid using menu or tool bar buttons
|
|
313 | QCAD (main) | Feature Request | Low | Isometric grid | Closed | |
|
Task Description
Switch grid from orthogonal to isometric.
|
|
1068 | QCAD (main) | Feature Request | Very Low | Isometric bitmap | Closed | |
|
Task Description
It would be a nice feature to be able to create an isometric projection of a bitmap.
|
|
430 | QCAD (main) | Bug Report | Low | ISO Projection of a symmetrical ellipse fails | Closed | |
|
Task Description
I am trying to perform an iso projection of an ellipse that represents a circle of radius 10. I get the debugger launch with the following error.
Uncaught exception at /home/kurtforrester/opt/qcad-3.0.0-rc2-trial-linux/scripts/ShapeAlgorithms.js:434: ReferenceError: Can’t find variable: getCenter 434 var arc = new RArc(getCenter(),
|
|
485 | QCAD (main) | Bug Report | Low | ISO project: solid fills | Closed | |
|
Task Description
Solid fills projected as outlline
|
|
397 | QCAD (main) | Feature Request | Low | ISO project: circles and arcs as ellipses | Closed | |
|
Task Description
ISO project: circles and arcs as ellipses
|
|
444 | QCAD (main) | Bug Report | Low | ISO project: arcs in text | Closed | |
|
Task Description
Arcs in texts (e.g. dimension labels) should be projected as ellipse arcs, not polylines.
|
|
646 | QCAD (main) | Feature Request | Low | Is a Debian Installation possible? | Closed | |
|
Task Description
Post from topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&p=6613#p6613
Re: QCAD 3 Final by ralvejd » Fri Jul 20, 2012 9:43 pm
Yes nice news I’m waiting for a Debian installation
|
|
2305 | QCAD (main) | Bug Report | Low | Invisible XLine under visible XLine may prevent selecti ... | Closed | |
|
Task Description
To reproduce:
1. File – New 2. Create a new layer (layer 1) 3. Draw an horizontal infinity line 4. Duplicate “layer 1” (layer 1 Copy) 5. Hide “layer 1 Copy” 6. Try to select the line in “layer 1”
What happens: It’s not possible to select the line in the visible layer (layer 1) if the line is present in the duplicated layer (layer 1 Copy) and that layer is either hidden or locked.
Expected: It should be possible to select the line, as the overlapping line in the other layer is hidden/locked .
|
|
1941 | Snapshot Release | Bug Report | Low | Invisible layers displayed | Closed | |
|
Task Description
Snapshot release 3.23.0.2
See also: https://qcad.org/rsforum/viewtopic.php?p=24757
|
|
1182 | QCAD (main) | Bug Report | Low | Invisible dashed circles/splines | Closed | |
|
Task Description
Starting with 3.7.7 I noticed, that some parts in drawings are missing: affected are some circles and (some) closed splines. These were created with earlier releases of qcad3.
Attached a file that has two circles, only one of them showing at first (drawn in 3.8.0); set line-display “screen” (NL command) to see the other (drawn earlier). From the dxf serialization (dxflib or teigha does not matter) I do not see where that should stem from or how to fix this.
At zero degrees there is a little dot though, and also, only certain dashed line-types “hide” the (outer only) circle.
Filed under Ubuntu, not tested on windows etc.
|
|
865 | QCAD (main) | Bug Report | Low | Invisible Blocks are causing a warning Window ... | Closed | |
|
Task Description
If I use in an area with invisible Blocks the “rectangular selection” in “lower left to upper right” direction for a move/copy, mirror, clipboard etc. action - a warning window appear. Also the reference points of the invisible blocks are visible.
If I use the “rectangular selection” in upper right to lower left direction everything works as expected.
|
|
347 | QCAD (main) | Task | Low | Investigate QPainter warnings when running QCAD in -no- ... | Closed | |
|
Task Description
Invastiagte QPainter warnings when running QCAD in -no-gui mode
See forum: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1653&start=45
|
|
914 | QCAD (main) | Performance Issue | Low | Invert selection: poor performance | Closed | |
|
Task Description
Inverting the current selection is significantly slower than select all, deselect all or other selection tools.
|
|
2228 | QCAD (main) | Bug Report | Low | Invalid Symbol Table name. | Closed | |
|
Task Description
During saving file I’m getting information “Invalid Symbol Table name error”. Problem is already known so i tried to follow the instructions given to other users by you. I’ve tried to change spaces to _ symbol in the layers names or deleting polish specific letters but there was no change. I was able to find out that the problem is related only to four layers named: A_ciany... When I delete these layers I’m able to save file without error message. Can you tell me what’s wrong in these layers? I’ve tried to change names of these layers but problem still exists. Best regards.
|
|
2235 | QCAD (main) | Bug Report | Low | Invalid symbol table name | Closed | |
|
Task Description
Hello,
I have got a dwg file from architect, which I can open, but I get “Invalid symbol table name” when I try to save it. I do not know which software was used to create it. I have tried to change all spaces and national characteds in block and layers names as advised elswhere, but that didn’t help.
Lp Tomaž
|
|
304 | QCAD (main) | Feature Request | Medium | invalid hatch area hint | Closed | |
|
Task Description
Trying to build a hatch area sometimes results in “invalid hatch area”. It would be nice if QCAD could give a hint why / where the problem occurs (where is “line too long” or “not closed”).
|
|
1687 | QCAD (main) | Bug Report | Low | Invalid entry not caught in Scaling task | Closed | |
|
Task Description
QCAD hangs up in Scaling task when invalid value given: example .0.50 Inadvertently entering two decimal points hangs it up.
|
|
1422 | QCAD (main) | Bug Report | Low | Invalid application window position in QCAD3.ini leads ... | Closed | |
|
Task Description
QCAD3.ini may contain invalid positions for the main application windows, e.g. [Appearance] Position.X=-32000 Position.Y=-32000
This leads to an invisible main window after starting QCAD under Windows systems.
|
|
615 | QCAD (main) | Bug Report | Low | Intersection beween an ellips and a tangent. | Closed | |
|
Task Description
The intersection between an ellips and a tangent is not détected. Demonstration
Using tool split 2. When clicking on part 1 of the circle only part 1 is removed. When clicking on part 2 of the elipse part 2 and part 3 are removed. The intersection with the tangent is not found.
|
|
917 | QCAD (main) | Bug Report | Medium | Integrated help not working | Closed | |
|
Task Description
Help - Reference Manual does not have any effect on Windows.
|
|
1375 | QCAD (main) | Suggestion | Very Low | Install in hidden folder | Closed | |
|
Task Description
After each update, I add a dot before the ~user/opt folder (and in the program launcher) created by QCAD to unclutter my file manager’s appearance. Would be easy, I think, to make the installer put the program directly in ~user/.opt, and nobody would miss that folder while browsing through daily used files.
And what about installing the program as root, so all users of a computer could use it without personal installs, and only personal setting files created by users would be kept in ~user/.opt/qcam.
Jean-Claude
|
|
725 | QCAD (main) | Bug Report | Medium | Inserting items from part library may create invalid bl ... | Closed | |
|
Task Description
To reproduce: - Create a part library item with file name “Test1 .dxf” (note the space at the end of the base name) - Insert this part library item into a blank drawing - Try to save the drawing - Error “Invalid Symbol Table Name” occurs
|
|
2454 | QCAD (main) | Bug Report | Medium | inserted jpegs will not 'go to back' properly | Closed | |
|
Task Description
Hi
Long time no see - so long that I’ve had to reregister. I must be getting a bit better (though I only do pretty basic stuff).
I often have to trace an actual paper drawing, so I scan it in as a jpeg and insert in the usual way. For a while now, this has become difficult to do because however often I send the image to back or bring the polyline to the front, just moving my mouse over the photo (not selecting it) makes the line disappear and I’ve got a bit fed up with trying to work around this (I don’t think it was always like this?)
I’ve attached my current example (there’s only a single image in it at the moment), and thank you in advance for your patience and help.
Jackie
|
|
2072 | QCAD (main) | Suggestion | Low | Inserted and flipped block mirrors text and dim | Assigned | |
|
Task Description
Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.
Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.
Version 3.23.0 doesn’t shows this behavior.
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206
|
|
2417 | QCAD (main) | Bug Report | Low | Insert Measurement/e.g. d1 Point to Point fails within ... | Closed | |
|
Task Description
Insert Measurement / e.g. Point to Point fails within Coordinate (SX) dialog. It is offered for X and Y but I can’t find a way to use it. For a proper measurement with IP I need to use Autosnap etc. but that means I have to switch from Coordinate snap to an other snap with no way to return to use the d1 variable.
|
|
2061 | QCAD (main) | Bug Report | Low | Insert Library items fails to update relative zero poin ... | Closed | |
|
Task Description
To reproduce the issue: Insert a Library item from the Library browser and the RZ point will stay where it is.
|
|
68 | QCAD (main) | Bug Report | Medium | insert from library browser crashes | Closed | |
|
Task Description
new file
insert (drag-n-drop or insert button) from library browser → segfault
Thread [1] 12403 (Suspended : Signal : SIGSEGV:Segmentation fault)
RObject::getId() at RObject.h:92 0x8a11c82
RClipboardOperation::copy() at RClipboardOperation.cpp:66 0x8d4892a
RPasteOperation::apply() at RPasteOperation.cpp:30 0x8d4841a
RDocumentInterface::previewOperation() at RDocumentInterface.cpp:1,766 0x8de19bb
REcmaDocumentInterface::previewOperation() at REcmaDocumentInterface.cpp:4,711 0x889aaad
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa83ced9f
0xb6a423e3
<...more frames...>
|