QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummary  ascStatusProgress
 2304 QCAD (main)TaskLow Printing blank page Closed
100%
Task Description

Hello,

I must have something set up wrong, prints blank both on printer and pdf....

 452 QCAD (main)Bug ReportMedium Printing issues OSX Lion Closed
100%
Task Description

When printing a drawing to A3 format on a Canon iX4000 in Qcad 3 RC2 the image is cropped when as if i am trying to print to a A4 page. Setting are correct, however.
(I see a release candidate 3, but where can i download it? Checking versions confirm that i am up-to-date)

 224 QCAD (main)Bug ReportHigh Printing not working under Windows Closed
100%
Task Description

Printing does nothing.
Sometimes crashes on quite (possibly related to printing).
PDF export works (as a workaround).

 285 QCAD (main)Bug ReportHigh Printing not working under Windows Closed
100%
Task Description

I cannot print directly from the program: clicking “printprewiu” ,appears icon “print”,clicking it opens the printer installed window, but then it not print anything. greetings

 1929 QCAD (main)Bug ReportMedium Printing Problem - Preview differs from Printout Closed
100%
Task Description

... ? I reported this already some days ago, but the task doesn’t show up in the list? ...

Comparing ‘Drawing’ and ‘Preview’ - o.k.
Comparing ‘Preview’ and ‘Printout’ - NOT o.k. ! Elements are missing
(Rem: in the QCAD sketch itself, the missing elements are in a separate layer; however, anyway - preview should show the same image as the printout !?)

G.W.

 34 QCAD (main)Bug ReportLow Printing tests Closed
100%
Task Description

Iterate through all drawings in a directory and create PDFs from them using the same mechanism as for printing.

 924 QCAD (main)Bug ReportLow Printing under Linux: printing continues after cancelli ...Closed
100%
Task Description

Once the print dialog is displayed, it will print even if I “cancel” or “x” the page.

1104QCAD (main)Feature RequestLowPrinting: Add support for page rangeAssigned
0%
1 Task Description

When printing from the preview mode a standard Windows popup shows, letting me select the printer, number of copies and a page range. Unfortunately QCAD (or Windows) ignores the page range - it always prints all pages. So right now I always have to copy the parts I want to print, page them into a separate document and print that instead - even though I got all my stuff nicely lined up for printing on multiple pages.

 294 QCAD (main)Bug ReportLow Printing: Exception: page tags Closed
100%
Task Description

Uncaught exception at C:/DISEGNO/QCAD Professional/scripts/File/PrintPreview\Print.js:345: Error: QFont::QFont(): could not find a function match; candidates are: QFont() QFont(QFont arg1) QFont(QFont arg1, QPaintDevice pd) QFont(String family, int pointSize, int weight, bool italic)

 341 QCAD (main)Bug ReportMedium PrintPreview: Auto Fit Pages doesn't work as excepted Closed
100%
Task Description
  1. load attached drawing
  2. print preview
  3. auto fit pages
  4. shows 2 columns (wrong) and 13 rows (correct), see attachment
 339 QCAD (main)Bug ReportMedium PrintPreview: multi page widget doesn't work anymore Closed
100%
Task Description
  • the cells are not shown anymore
 2489 QCAD (main)Bug ReportLow Prints A1 instead of drawing  Closed
100%
Task Description

All I get when I print is an “A1”, which I believe is the drawing size

 33 QCAD (main)Bug ReportLow Prints always to A4 Closed
100%
Task Description

Print prints always to A4, regardless of paper size chosen.

 319 QCAD (main)Bug ReportMedium Prints as though A4 even though I change paper size in  ...Closed
100%
Task Description

This continues a problem that occurred in Qcad 2.2/OpenSuse 11.1:

1. The default paper size is always A4. (minor, but annoying)

2. Here is the serious problem: When I change the paper size to, for example tabloid, in File/Drawing Preferences/Page and in Print/Properties, the print job prints as though it were A4. This occurs unless I first go to Yast or Control Center and (as superuser) change the default page size. Other programs (such as Open Office) don’t require this.

The printer is an HP deskjet 9800, and the problem occurs with either CUPS or hplip printing.

I am using Opensuse 11.3 (I haven’t been able to install successfully opensuse 11.4 on my computer), Qcad
Version:
3.0 Beta 2
Date:
Sep 17 2011
Qt Version:
4.7.3
Edition:
Full Version

 1667 QCAD (main)Bug ReportLow Problem with changing Paper Size in Drawing Preferences Closed
100%
Task Description

V3.19: In Drawing Preferences-Printing I cannot seem to get paper size change to remain. I change from A4 to A3, but this has no effect, seems stuck on A4.

I can change it in Application Preferences, but obviously this does not have an effect once I have started a new drawing.

 150 QCAD (main)Bug ReportLow problematical arc angle values after divide circle Closed
100%
Task Description
  1. new circle
  2. modify → divide circle in 4th quadrant


arc start angle = 317.726311, end angle = 677.726311
→ QCAD hangs if one try to move the arc start / end point

 2481 QCAD (main)Bug ReportLow Program crash with print preview Closed
100%
Task Description

I often have an unusual program crash when switching to print preview and back several times.
The first click on print preview shows no reaction. On the second click, ok.
After two or three changes, a program crash suddenly appears after a few seconds.
Even with an empty document.
I work on Win 10 with i7-10700KF (not overclocked), GeForce RTX 2070 super,
EPSON ET-2820 Series (Microsoft IPP Class Driver) and with QCAD 3.28.1.0.
Up to now I have worked with 3.17.xx (without problems) and upgraded to QCAD 3.28.1 yesterday 06/19/2032.
I find the program very good and have always been able to draw my private projects well and efficiently on paper.
But I can’t work with this error.
Thank you in advance for your help

 1198 QCAD (main)Bug ReportLow Projection scales off with other units than Millimeter Closed
100%
Task Description

- Create drawing in unit other than Millimeter (Centimeter, Inch, etc)
- Project part of the drawing (Isometric, Orthographic, ..)
- Scale of result is off

 2238 QCAD (main)Bug ReportLow Projection: exception when projecting polyline with sin ...Closed
100%
Task Description

1. Create polyline with one single arc segment
2. Project (Modify > Projection > Isometric Projection, dwgmapconvert, etc.)

Yields:

TypeError: Result of expression 'ret[0].countSegments' [undefined] is not a function
 2368 QCAD (main)Bug ReportLow Projections: attributes are not projected Closed
100%
Task Description

Affects all projection tools including the dwgmapconvert command line tool.

 2077 QCAD (main)Bug ReportLow Property Editor / Fixed Extension Line fails in certain ...Closed
100%
Task Description

If I edit a DIM regarding the fixed Extension Line Length it will fail if it has to be extended to meet the new length. Even it has failed - the Property Editor will provide from now on the new length as the “correct” value for the Extension Line Length.

Example drawing: Try to adjust the Extension Line Length to 50 ...

 354 QCAD (main)Bug ReportLow Property Editor / Select Layer Malfunction Closed
100%
Task Description

RC1b
To change the postfix for dimension.
Situation: New drawing, Dimension in Drawing, Dimension on one Layer. Menu > Select > Select Layer and click on a dimension. Went to Property Editor > Geometry > Label and change the Label in <>”. Nothing happens.

The same procedure with a other kind of selection works and it works also in the 2.2.2.0

 1125 QCAD (main)Feature RequestLow Property Editor / Total angle of an arc Closed
100%
1 Task Description

Hi,

if I have an arc and use the Property Editor to get the Geometrical information I always miss the total angle of the arc.

Yes - I have the Start and the End angle but to get the Total angle I have to draw construction lines to be able to use the Angular Dim or Info angle tool /or I need to use a pocket calculator ...

It would be nice to have this calculated by QCAD - I assume it can’t be that difficult to design an extra field which will display, based on the start and end angle, the total angle of an arc.

What do you think?

1678QCAD (main)SuggestionLowProperty Editor dialogAssigned
0%
Task Description

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239

 63 QCAD (main)Bug ReportVery Low Property Editor is floated after first start Closed
100%
Task Description

OpenSUSE / Ubuntu / Kubuntu: After the first start, the property editor window is (unless the layer list) floated.

 2100 QCAD (main)Bug ReportLow Property Editor not showing polyline area Closed
100%
1 Task Description

Polyline’s areas don’t shows own property in Property Editor

2229QCAD (main)Feature RequestLowProperty Editor, option format property values as decim...Assigned
0%
Task Description

Angle Display is decimal although the decimal display is disabled in Application Preferences.

Format should be 17° 31’ 52” instead of 17.531111.

 2134 QCAD (main)Bug ReportLow Property Editor, Total Length result incorrect Closed
100%
Task Description

Case: Tested with the example drawing provided below:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=7776

If I select every single entity piece by piece with the mouse pointer the total length is correct.
If I select everything in once with a rectangular or a polyline selection the total length is incorrect.

 422 QCAD (main)Bug ReportLow Property editor: "*VARIES*" value set as text  Closed
100%
Task Description
  1. Select two texts with different contents
  2. Click into Contents field in the property editor
  3. press enter or move focus away
  4. Texts are changed to “*VARIES*”
1827QCAD (main)Feature RequestLowProperty Editor: Accept advanced scale expressions for ...Assigned
0%
Task Description

Hi,

Identical scale expression used in Print Preview like 5:1, 5/1, 5”=1”, 5 are working flawless like expected.
Same expression used in a Viewport scale leads to different outcomes.

The Property Editor used to fix that in Paper_Space does also not accept those standard expressions.

995QCAD (main)Feature RequestLowProperty editor: add 'edit block' buttonAssigned
0%
1 Task Description

Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.

 1834 QCAD (main)Bug ReportLow Property Editor: Attributes of block reference not show ...Closed
100%
Task Description

- Create block with attributes
- Create block reference
- Select block reference
→ Property editor does not show attributes

 1329 QCAD (main)Bug ReportLow Property Editor: Changing value of block attribute sets ...Closed
100%
1 Task Description

Attributes are not fixed on their layer. When changing the content of an attribute the content is automatically placed on the active layer not on the attribute layer.
It would be much better if changing an attribute would not result in a change of the assigned layer.
For an example look also on www.qcad.org/rsforum/viewtopic.php?f=89&t=3870

Thomas

 1808 QCAD (main)Bug ReportLow Property Editor: Changing width, height, orientation fo ...Closed
100%
Task Description

Property Editor / Size adjustment for Polygon rectangle accepts no changes for Width and Height. Was perfect working till 3.21.2

 52 QCAD (main)Bug ReportLow Property Editor: combo boxes Closed
100%
Task Description

Text entities show a field “Font Name” in the property editor. This should offer a font combo box to change the font.

Hatch entities show a field “Pattern/Name” which should offer a combo box with pattern names.

 957 QCAD (main)Bug ReportLow Property editor: custom property with title 'Z' not dis ...Closed
100%
Task Description

Properties with title ‘Z’ are not displayed in the property editor. This is correct but should not apply to custom, user defined properties.

 1397 QCAD (main)Bug ReportLow Property Editor: editing redundant properties Closed
100%
Task Description

Editing redundant properties in the property editor has no effect (e.g. length of line, area of circle, ...)

 104 QCAD (main)Bug ReportLow Property Editor: entity type filter not applied to colo ...Closed
100%
Task Description

Entity filter is not applied to combo box type properties.

 2073 QCAD (main)Bug ReportLow Property Editor: Imperial Area info incorrect Closed
100%
Task Description

Drawing Unit: Inch
Label Format: Architectural and Engineering

Note: Info tool calculation is correct.

 1349 QCAD (main)Bug ReportLow Property Editor: Linetype Scale and Draw Order not visi ...Closed
100%
Task Description

I just compiled from github master 10dd588243cce87eb9a7c901ebd77c70464bcb94, and discovered that the Property Editor does not display the values of the “Linetype Scale” or the “Draw Order” anymore, even though they were properly displayed in version 3.12.1.0. The gui text boxes allow the values to be edited, it seems, but the current values are still not displayed after entering new values.

Tested on Arch Linux, 64 bit.

 2089 QCAD (main)Bug ReportLow Property Editor: Linetype Scale and Draw Order wrongly  ...Closed
100%
Task Description

Case:

Drawing unit = inch,

Dimension Label Format set to Engineering or Architectural,

 1049 QCAD (main)Feature RequestLow Property editor: make behavior with block references /  ...Closed
100%
Task Description

Configuration option for property editor:

  • if block reference with attributes is selected, filter by block reference
  • if block reference with attributes is selected, show all selected entities (no filter)
 383 QCAD (main)Bug ReportLow Property editor: Moving entities to invisible layer Closed
100%
Task Description

Entities cannot be added to an invisible layer which is intended.

However, it should be allowed to change the layer in the property editor to an invisible layer.

 486 QCAD (main)Bug ReportLow Property editor: orphaned line edit Closed
100%
Task Description
  1. select hatch
  2. click “+” in property editor to move selection to new layer
  3. enter new layer name
  4. OK
 1060 QCAD (main)Bug ReportLow Property editor: read only text entity property editabl ...Closed
100%
Task Description
  • Select text entity
  • Right-click on line edit of property ‘Plain Text’
  • Insert symbol
 1010 QCAD (main)Bug ReportLow Property editor: selection filter combobox looses choic ...Closed
100%
Task Description
  1. Select line and arc
  2. Set selection filter in property editor to ‘lines’
  3. Selection filter combo no longer contains choice for ‘arcs’.
 283 QCAD (main)Bug ReportLow property editor: shift - left arrow to select broken Closed
100%
Task Description

property editor: shift - left / right arrow to select in line edit broken (hot key for next / prev tab)

 1449 QCAD (main)Feature RequestLow Property Editor: show centroid of polylines Closed
100%
1 Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320

 1741 QCAD (main)Bug ReportLow Property Editor: titles of block attributes with _ cut  ...Closed
100%
Task Description

- Create block
- Add attribute with tag “MY_ATTR” - Create block reference

- Select block reference
- Block attribute of block reference shown as “ATTR”

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5544

1285QCAD (main)Feature RequestLowProperty PainterResearching
0%
2 Task Description

Easy transfer of properties from one entity to others

Showing tasks 1801 - 1850 of 2556 Page 37 of 52<<First - 35 - 36 - 37 - 38 - 39 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing