|
346 | QCAD (main) | Feature Request | Low | Set up fixed grid | Closed | |
|
Task Description
Set up fixed grid without any auto scaling or adjusting or meta grid at all.
|
|
348 | QCAD (main) | Feature Request | Low | Dimensions: Inch / Architectural: supporess 0 feet | Closed | |
|
Task Description
Dimensions: Inch / Architectural: supporess 0 feet
|
|
355 | QCAD (main) | Feature Request | Low | Remember function for dimension Option | Assigned | |
|
Task Description
I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.
Why Remember Function: If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.
|
|
358 | ECMAScript | Feature Request | Low | lfVVCSSMBo | Closed | |
|
Task Description
Good point. I hadn’t thgouht about it quite that way. :)
|
|
359 | QCAD (main) | Feature Request | Low | Bigger lineweights | Closed | |
|
Task Description
Currently lineweights seem to be available up to 2.11mm,how about extending the range for some bigger lineweights!
Regards
Clive
|
|
366 | QCAD (main) | Feature Request | Low | Draw circles tangent to other entities | Closed | |
2 |
Task Description
Hi Andrew
It would be useful to have an option in the Circle tools to be able to draw a circle tangent to other entities such as lines/circles etc.
Regards
Clive
|
|
367 | QCAD (main) | Feature Request | Low | Snap "Reference" also for an arc ... | Closed | |
1 |
Task Description
The Snap “Reference” is perfect working on circles.
I would be nice to have this function also on Arc’s. There are many necessities to attach a Horizontal or Vertical line on an arc or an “ex circle” (circle after a cut,)rounds etc. in a professional drawing.
|
|
382 | Documentation | Feature Request | Low | Library Browser | Closed | |
|
Task Description
Please explain the possibilities of the “Library Browser” I’m not able to make a new entry (Drawing Sheets)
|
|
384 | QCAD (main) | Feature Request | Low | Menu icons under Mac OS X | Closed | |
|
Task Description
Make this an option. Default should be no icons since icons are unusual for Mac OS X application menus.
|
|
388 | QCAD (main) | Feature Request | Low | More options for Polygons ... | Closed | |
2 |
Task Description
Possibility to draw Polygons with a given dimension for across flats (not only corners).
|
|
393 | QCAD (main) | Feature Request | Low | Scrolling with arrow keys | Closed | |
|
Task Description
Scrolling with arrow keys
|
|
396 | QCAD (main) | Feature Request | Low | Blocks: moving blocks: show bounding box | Assigned | |
|
Task Description
Blocks: moving complex blocks with drag and drop should show bounding box as preview
|
|
397 | QCAD (main) | Feature Request | Low | ISO project: circles and arcs as ellipses | Closed | |
|
Task Description
ISO project: circles and arcs as ellipses
|
|
398 | QCAD (main) | Feature Request | Low | status bar: avoid scientific display | Closed | |
|
Task Description
status bar: avoid scientific display of large float numbers
see also: http://ribbonsoft.com/rsforum/viewtopic.php?t=1717
|
|
404 | QCAD (main) | Feature Request | Low | New Program Icon | Closed | |
|
Task Description
Pretty icon for Gnome 3 desktop favorite.. Kind of subjective :)
|
|
408 | QCAD (main) | Feature Request | Low | Script Macro recorder | Closed | |
2 |
Task Description
Having practically no experience in scripting, a recorder that one could activate to memorize repetitive tasks (ie: inserting several layers with different attributes when starting a new drawing)would a useful tool to help get a start on scripting.
|
|
417 | QCAD (main) | Feature Request | Low | Autosave Dateinamen Nummer ersetzten mit Datum. | Closed | |
|
Task Description
Wenn ich das Autosave System richtig verstanden habe funktioniert es so:
Nach Ablauf der eingestellten Zeit wird eine Datei mit Nummer im angegebenen Zielordner abgelegt. Diese Nummer ist weder fortlaufend noch sicher auf- oder absteigend - also keinerlei Hinweis im Dateinamen für den Anwender welches nun die letzte Sicherung ist. Ziel scheint zu sein das man eine Sicherung pro Tag hat, richtig?
Allerdings ist die Anzahl der Sicherungen pro Tag abhängig von der Anzahl der neu gestarteten QCAD Sitzungen. Starte ich das Programm einmal für den ganzen Tag habe ich eine einzige Sicherung von jeder bearbeiteten Zeichnung. Sicherungen haben dann die selbe Nummer und werden deshalb jeweils überschrieben.
Starte ich das Programm 10 mal pro Tag habe ich 10 Sicherungen (vorausgesetzt ich bearbeite die selbe Zeichnung in jeder Sitzung) mit unterschiedlichen und nicht in Reihe laufenden Nummern. Sicherungen können somit nicht überschrieben werden und am ende des Tages könnten leicht zig wenn nicht hunderte Sicherungen gespeichert sein.
Würde nun diese Nummer im Dateinamen ersetzt mit dem aktuellen Datum habe ich eine Sicherung pro Tag unabhängig wie oft ich QCAD an diesem Tag gestartet habe. Zudem kann der Anwender gleich den Sicherungstag im Dateinamen erkennen und muss sich nicht durch die “geändert am” Info sekundengenau kämpfen.
Macht das Sinn?
|
|
425 | QCAD (main) | Feature Request | Low | Custom properties | Closed | |
1 |
Task Description
Assigning custom properties to entities and possibly layers and other objects.
|
|
426 | QCAD (main) | Feature Request | Low | Scriptable entities | Closed | |
|
Task Description
Provide script functionality for entities:
Paint or decorate entity, for example based on custom properties assigned to the entity
Listen and react to events
|
|
431 | QCAD (main) | Feature Request | Low | Construction lines | Closed | |
3 |
Task Description
Construction lines (’infinite’ lines).
|
|
437 | QCAD (main) | Feature Request | Low | trim 2 ends | Closed | |
|
Task Description
Selecting two enteties as borders for the entety to trim on both ends.
|
|
448 | QCAD (main) | Feature Request | Low | Put the asterisk in tab title of modied files in front ... | Closed | |
|
Task Description
Put the asterisk in tab title of modified files in front of the name, so it can be seen, when there are so many tabs, that the names will be truncated.
|
|
454 | QCAD (main) | Feature Request | Low | combined move/rotate/scale with two reference points | Closed | |
|
Task Description
It would be extremely helpful, if marked objects could be moved/rotated/scaled in a single step with two reference points as source and two reference poitns as destination. With a tool like this, “should match”-drawings could be merged easily.
|
|
455 | QCAD (main) | Feature Request | Low | logical operations for polylines | Assigned | |
2 |
Task Description
A missing feature in my work are logical operations (combine, intersect, ..) for polylines
Example: Draw some elements, select them, say combine. The result will be the outline of all elements.
|
|
467 | QCAD (main) | Feature Request | Low | Feature request for new Arc tool option to add to Arc s... | Assigned | |
2 |
Task Description
For and behalf of mandrena
To add another Arc tool option in Arc tools set:
1.Specify Start point for Arc. 2.Specify End point for Arc. 3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!
|
|
471 | QCAD (main) | Feature Request | Low | Feature request -to make the Library browser "dockable" ... | Closed | |
|
Task Description
It would be very useful to be able to “dock” the library browser in the main QCAD window.
|
|
477 | QCAD (main) | Feature Request | Low | crop objects at page margins | Closed | |
|
Task Description
It would be nice if QCad would print only objects inside page margins (i.e. to print a detail of a large drawing with margins). At the moment objects are visible up to page borders, and exporting to PDF with re-printing to a larger page contains even more objects.
|
|
482 | QCAD (main) | Feature Request | Low | Disproportionate scaling of blocks | Closed | |
|
Task Description
Block with hatch scaled with factor in X different from factor in Y leads to problems if contour contains arcs (which cannot / are not scaled disproportionally).
|
|
488 | QCAD (main) | Feature Request | Low | Font preference for dimensions | Closed | |
|
Task Description
It would be nice to have a selectable fonts for dimension text.
|
|
500 | QCAD (main) | Feature Request | Low | Autohide Side Panel | Assigned | |
1 |
Task Description
it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.
|
|
501 | QCAD (main) | Feature Request | Low | Dimension labels: R prefix | Closed | |
|
Task Description
Is it possible to add the “R” prefix (Radius) in the label drop box when dimensioning?
|
|
502 | QCAD (main) | Feature Request | Low | Points on line: enter distance instead of number of poi... | Assigned | |
2 |
Task Description
Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.
|
|
503 | QCAD (main) | Feature Request | Low | Convert entities to points with a fixed distance | Assigned | |
|
Task Description
Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.
See also forum at: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834
|
|
505 | QCAD (main) | Feature Request | Low | multiple print configurations (layer+scale+center) | Closed | |
|
Task Description
having multiple print configurations regarding visible layers, scale and paper centre saved in the drawing or in a separate file would be extremely helpful
|
|
508 | QCAD (main) | Feature Request | Low | zoom speed option | Closed | |
1 |
Task Description
Add a zoom speed option in preferences
|
|
512 | QCAD (main) | Feature Request | Low | Modify stretch and Restrict ortho | Assigned | |
1 |
Task Description
The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.
So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?
|
|
514 | QCAD (main) | Feature Request | Low | Punktpestimmung Intersection manual muss immer wieder n... | Assigned | |
|
Task Description
Beispiel: Zeichnen einer Linie (Line two points) mit Punktbestimmung. Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut
Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht
|
|
516 | QCAD (main) | Feature Request | Low | To add option to 'print only' selected area. | Assigned | |
2 |
Task Description
To add the option to ‘print only’ selected area in a drawing.
|
|
517 | QCAD (main) | Feature Request | Low | Import 3D polyline as 2D polyline | Closed | |
|
Task Description
Import 3D polyline as 2D polyline from DXF/DWG
Like QCAD 2.
|
|
519 | QCAD (main) | Feature Request | Low | Press tab to access first control in options tool bar | Assigned | |
1 |
Task Description
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867
Apparently this was possible in QCAD 2 due to the default behavior of Qt.
|
|
525 | QCAD (main) | Feature Request | Low | change the printed symbol of points | Assigned | |
1 |
Task Description
Hi,
in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature.
It would be nice if one could change this behaviour / select the symbol of points.
Best regards - Stefan
This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.
|
|
527 | QCAD (main) | Feature Request | Low | Command line option to use alternative location for con ... | Closed | |
|
Task Description
Speziell gedacht für den Mobilen Einsatz wie z.B. auf einen USB-Stick um bei wechselnden PC Einsatzorten immer wieder die einmal gemachten Einstellungen für QCad benutzen zu können.
Siehe auch hier: http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5888#5888
|
|
528 | QCAD (main) | Feature Request | Low | Font Editing | Closed | |
|
Task Description
Dear Sir, I have noticed that in QCAD 3 rc4 it is not possible to open and edit font files. This feature exists in version 2.2 and is indispensable to people using not common languages. For example the unicode font does not have all greek characters, so I have added a few of the missing ones by editing the unicode.cxf font with version 2.2. I kindly ask the designers to consider enabling this capability again. Thank you!
|
|
533 | QCAD (main) | Feature Request | Low | Kopierendes/Ausschneidendes Rechteck (Kreis) Werkzeug . ... | Closed | |
|
Task Description
In meiner Vergangenheit habe ich in anderen CAD Programmen mit folgendem Werkzeug gearbeitet was ich für Detailansichten, Bereinigungen oder ähnliches extrem Hilfreich empfand. Wäre schön wenn es so etwas auch in QCad gebe.
Werkzeug: Man zieht ein Rechteck (oder Kreis) über einen gezeichneten Bereich auf. Alles was innerhalb oder außerhalb des Rechtecks liegt wird kopiert/ausgeschnitten/gelöscht und auch direkt an den Linienkanten des auswählenden Rechtecks geschnitten.
Momentan kann ich ein Rechteck für Selektion bestimmen - muss aber dann nach einer Kopie alles manuell trimmen, löschen etc. um nur den gewünschten Rechteckinhalt zu bekommen ...
|
|
534 | QCAD (main) | Feature Request | Low | Werkzeug Lengthen erweitern mit minus amount .... | Closed | |
|
Task Description
Wäre schön wenn das Werkzeug “Lengthen” auch mit Minus Amounts funktionieren würde ....
|
|
535 | QCAD (main) | Feature Request | Low | Trim Werkzeug auch zum verkürzen von Linien ... | Closed | |
|
Task Description
Das Trim Werkzeug in QCad ist ideal um Linien zu verlängern in Bezug zu einer anderen Linie. Wäre schön wenn dies auch umgekehrt funktionieren würde so das ich Linien verkürzen kann in Bezug zu einer anderen (nicht schneidenden) Linie.
|
|
538 | QCAD (main) | Feature Request | Low | add to / remove from hatch | Closed | |
|
Task Description
Given a hatch, it would be very useful if one could add another closed polyline to the existing hatch or remove the overlapping area from the existing hatch.
|
|
550 | QCAD (main) | Feature Request | Low | Search / replace for (selected) text entities | Closed | |
|
Task Description
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=1923
|
|
554 | QCAD (main) | Feature Request | Low | Auswahlbox sollte auch mit der Shift Taste Bereiche dem... | Assigned | |
|
Task Description
Ziehe ich mit der Maus eine normale Auswahlbox kann ich Elemente markieren. Möchte ich einzelne Bereiche wieder herausnehmen muss ich alle Elemente einzeln anklicken (mit gedrückter Shift Taste). Ich kann zwar dies komfortabler gestalten mit der Select → (De -) Select Contour Funktion welche aber erst über das Menue aufgerufen werden muss.
So wie ich einzelne Elemente mit der Maus auswählen und mit der Shift-Maus Funktion deselektieren kann wäre es schön wenn die Shift Taste auch bei Auswahlbereichen direkt zum deselektieren eingesetzt werden könnte.
|
|
555 | QCAD (main) | Feature Request | Low | Blöcke zählen .... | Closed | |
|
Task Description
Eine Zählfunktion die erfasst wie oft ein Block in einer Zeichnung vorhanden ist.
Hintergrund ist das es damit eine Unterstützung gäbe die das erstellen von Stücklisten etc. erleichtert würde.
Die Anzahl der Blöcke könnte z.B in der Block List eingeblendet werden wie z.B.: “Schraube M6x40 (17x)” oder auch in einer extra Text Liste. Zudem könnten so auch nicht (oder nicht mehr) benutze Blöcke ermittelt werden wie z.B. “Schraube M6x20 (0x)” welche dann aus der Zeichnung entfernt werden könnten.
Siehe auch:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1920
|