|
1677 | QCAD (main) | Bug Report | Low | Dimension: Scale option grayed out in model space | Closed | |
|
Task Description
... impossible to chose a scale in the DIM option bar.
|
|
1679 | QCAD (main) | Bug Report | Low | Print Preview scale format metric/imperial selection bo ... | Closed | |
|
Task Description
Not sure: Bug or feature request. However - it’s right now confusing
It would be nice if the scale format list would respond to the “Measurement System (for line types and hatch patterns)” setting.
If my setting is Metric:
1:1
1:2
1:5 etc etc
If my settings is imperial:
1”=1”
1”=2”
1”=4” etc etc
|
|
1680 | QCAD (main) | Bug Report | Low | Alignment of text in attribute definition changes durin ... | Closed | |
|
Task Description
When defining block attributes, the default text alignment is center.
I changed this to align left and copied an attribute (ctrl + C) and then pasted (ctrl + V) fourteen times.
As I opened each one up with the editor to change the tag information, I noticed that every copied/pasted attribute definition had changed to align right.
I purposely set the first one back to align left and copy/pasted it a few times. Each paste had the attribute text set to align right again.
OS: Linux Mint 18.3 [64-bit] QCAD Pro: 3.19.1.0 [64-bit]
|
|
1682 | QCAD (main) | Bug Report | Low | Draw > Text: line spacing factor < 0.25 or > 4.0 causes ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=5267
|
|
1683 | QCAD (main) | Bug Report | Low | Print Page Borders option does not switch to lay-out | Closed | |
|
Task Description
The Print Page Borders option does not switch to lay-out blocks
|
|
1684 | QCAD (main) | Bug Report | Low | Always Check for updates | Closed | |
|
Task Description
“check for updates” works at boot even though unchecked in application preferences.
|
|
1685 | QCAD/CAM | Bug Report | Low | LinuxCNC no longer works under CAM Legacy Export | Closed | |
|
Task Description
On any version newer than 3.18.0 the LinuxCNC options under “Configuration” drop-down no longer work under CAM→CAM Legacy Export. As you can see in the attached screen shot, the menu line which would normally contain LinuxCNC is blank. Also, when LinuxCNC (Inch) and LinuxCNC (Millimeter) are selected, none of the Global or per-Layer options are available, it just says “No Global Options” and “No Layer Options” as you can also see in the screen shot. I think this is because both of these are derivatives of the main LinuxCNC configuration which is not working.
I have confirmed this problem with fresh installs (using the installer) on both Windows 10 and Debian testing
|
|
1686 | QCAD (main) | Bug Report | Low | File > Print: Line scale in Viewport wrong if Model_Spa ... | Closed | |
|
Task Description
Case: Line / Lineweight 2mm Model_Space Print Preview off / previously used scale was 1:1 Viewport 1:10 Paper_Space Print Preview scale 1:1 I’ll use the Paper_Space for a print: Works as expected. A 2 mm Line will be printed in 2 mm
__
Line / Lineweight 2mm Model_Space Print Preview off / previously used scale was 1:10 (closed Preview will keep it in memory), Viewport 1:10 Paper_Space Print Preview scale 1:1 I’ll use the Paper_Space for a print: Works not as expected! The Model_Space Print scale is used for scaling the 2 mm Line in the Paper_Space/Viewport. The Line will be printed with a 20 mm wideness.
|
|
1687 | QCAD (main) | Bug Report | Low | Invalid entry not caught in Scaling task | Closed | |
|
Task Description
QCAD hangs up in Scaling task when invalid value given: example .0.50 Inadvertently entering two decimal points hangs it up.
|
|
1688 | QCAD (main) | Bug Report | Low | Scaling (SZ) selection by Mouse only proportional possi ... | Closed | |
|
Task Description
Tested with checked / unchecked button for proportional scaling - but it doesn’t matter.
|
|
1689 | QCAD (main) | Bug Report | Low | Issue with Block Attributes | Closed | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. Create some block with attributes. 2. Insert this bock into “Model Space” or “Paper Space”. 3. Edit this block. Rename some Attribute names (tag, prompt). 4. And when in “Model Space” or “Paper Space” Synchronize Attributes, we have in properties old and new attributes.
|
|
1690 | QCAD (main) | Bug Report | Low | Issue with Layers | Closed | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. We have drawing with hierarchical layers. 2. When try for example to lock all layers from “Layer List Widget” by clicking to “Toggle lock” at Parent Layer. Then locked are all layers in this group. Same is with “Toggle snappable”, “Toggle plottable”, “Toggle frozen”. All works as expected. But “Toggle visibility” works only on this one parent layer.
|
|
1693 | QCAD (main) | Performance Issue | Low | Formatted text is not correctly displayed | Closed | |
1 |
Task Description
Texts justified and/or formatted in dxf or dwg files generated by Autocad not presented correctly when the file is opened by QCad, follow file for verification.
|
|
1694 | QCAD (main) | Bug Report | Low | Viewport entities - Context menu: does not work | Closed | |
|
Task Description
QCad 3.19.2 Pro 64 bit. Windows 10, Linux Mint
All functions in context menu does not work with “Viewport entities” (Delete, Cut, Copy,etc). But all same functions also work with keyboard shortcuts, from command line and buttons from toolbar.
|
|
1695 | QCAD (main) | Bug Report | Low | Context menu: editing tools not working in paper space | Closed | |
1 |
Task Description
Tools not working from context menu in paper space.
|
|
1696 | QCAD (main) | Bug Report | Low | Modify > Isometric Projection > Cylindrical: exception | Closed | |
|
Task Description
Modify > Isometric Projection > Cylindrical throws exception / broken.
|
|
1703 | QCAD (main) | Bug Report | Low | File > Bitmap Export: Monochrome with black background ... | Closed | |
|
Task Description
Exporting a monochrome bitmap with black background produces a black bitmap.
Affects File > Bitmap Export and dwg2bmp.
|
|
1704 | QCAD (main) | Bug Report | Low | Wrong labels for information area buttons | Closed | |
|
Task Description
In Information → Arc/circle/ellipse area tool labels for Area of sector and Area of segment buttons are switched.
|
|
1706 | QCAD (main) | Bug Report | Low | Grid line mask drawing lines | Closed | |
|
Task Description
After changing the colours of the grid points and grid lines I noticed that when I draw a line exactly over a grid line the grid line masks the drawing line. When zoomed in the lines disappear all together. Please see attached images.
|
|
1707 | QCAD (main) | Bug Report | Low | Dimension text size and arrow for imported drawings, wa ... | Closed | |
|
Task Description
A nasty bug that I posted some time in the forum that prevents QCAD to read properly the content block associated with dimension.
Here’s what is happening: - every dimension entity in DXF/DWG is stored with a block representing its contents (or in fact, anything else) - QCAD ignores that block and instead renders the dimension using the various sizes and properties of the dimension
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5133
|
|
1708 | QCAD (main) | Feature Request | Low | Layer > Select Layer: add feedback | Closed | |
|
Task Description
Win 7 Q-CAD 3.19.2
R-Click in Layer list With a selection, selecting by Layer adds the Items on that Layer to the selection. With a selection, deselecting by Layer subtracts the Items on that Layer from the selection. This is not a bug in casu because this can be the intention of the function. Adding or Subtracting.
Intuitively ‘selecting by Layer’ to retrict to that Layer solely has only the desired effect if no selection existed before. Deselecting by Layer with no previous selection should mention there was none to start with. Selecting by Layer from an empty Layer should mention that nothing is added.
Faults are prone to make.
Selecting a Layer uniquely would be an interesting additional feature.
Regards
|
|
1710 | Translation | Bug Report | Low | Lack of translations for close dialog using Ubuntu | Closed | |
|
Task Description
Using Ubuntu GNOME, there are some untranslatable buttons strings on close file dialog. Screenshot attached.
|
|
1711 | QCAD (main) | Bug Report | Low | Error at copy with refpoint and paste, result is mirror ... | Closed | |
|
Task Description
QCAD V3.19 Error at copy with ref point and paste
Look at the video
for testing I made a litte drawing, then select all then make copy with refpoint, set refpoint then insert it
Result: the copy is mirrored and with factor 1.2 greater then original
|
|
1712 | dwg2pdf | Bug Report | Low | dwg2pdf: auto fit fails for blocks | Closed | |
|
Task Description
Autofit (-a) has no effect when converting a block or layout block (other than Model_Space).
|
|
1715 | QCAD (main) | Bug Report | Low | Print option "Auto fit pages to drawing" broken | Closed | |
|
Task Description
Print option “Auto fit pages to drawing” broken.
|
|
1716 | Translation | Bug Report | Low | Wrong plural forms in translations | Closed | |
1 |
Task Description
I found that words which has plural forms are translated in manner where only two forms are possible - like in English language. For example: “Object” and “Objects”. But other languages (for example Polish) very often have more than 2 plural forms. There are also strings which use only one form (for example: “Reset label position of %1 dimension(s).”) but cardinal number placed in string point on more forms than one. All these strings looks bad when translated and sometimes even in English. I mark most of them using comments:
http://translate.qcad.org/pl/qcad/translate/#search=plural&sfields=notes
http://translate.qcad.org/pl/qcadpro/translate/#search=plural&sfields=notes
http://translate.qcad.org/pl/qcadcam/translate/#search=plural&sfields=notes
I believe problem can be fixed using plural form strings: https://www.gnu.org/software/gettext/manual/html_node/Plural-forms.html
|
|
1717 | QCAD (main) | Bug Report | Low | small fix in startup script | Closed | |
1 |
Task Description
The current startup script fails when called through symbolic link due to string:
DIR=${0%/*}
It is better to change it to:
DIR=$(dirname -- $(readlink -f -- $0))
|
|
1720 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: fails for Rays and Infinite Lines | Closed | |
|
Task Description
... if other entities involved.
Testdrawing: Please use the Auto Trim tool first with visible and then with invisible Block Countertop. The effect can change depending on where you click.
|
|
1724 | QCAD Community Edition | Suggestion | Low | "OVERKILL" command | Closed | |
|
Task Description
Is it possible to create “OVERKILL” command like in AUTOCAD
|
|
1725 | QCAD (main) | Bug Report | Low | File > Bitmap Export: thin lines not exported | Closed | |
|
Task Description
Thin lines are with sub pixel widths are not visible in exported bitmaps.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=30&t=5465
|
|
1726 | QCAD (main) | Bug Report | Low | Layer property "for plotting" seems not working | Closed | |
|
Task Description
Deaktivating “for plotting” (German “plottbar”) while editing properties of a layer seems to change nothing. I expected, that in print preview (SVG, PDF) these layers are deaktivatet too.
Deaktivating in these cases make sense as when real plotting.
|
|
1727 | QCAD (main) | Bug Report | Low | Autosave - Error feedback - DXF staed but should be DWG | Closed | |
|
Task Description
Hi Andrew,
Just a little thing I noticed recently.
My default is set to save as DWG and indeed it does, however the auto-save feedback tells me that the file is saved to DXF, although it actually does save to DWG - no big deal but is this correct feedback?
Many thanks
Clive
|
|
1728 | QCAD (main) | Suggestion | Low | Script bindings for Qt 5.9.4 | Closed | |
|
Task Description
Please add script bindings for Qt 5.9.4, thank you.
|
|
1729 | QCAD (main) | Bug Report | Low | Wrong sizes for dimensions in blocks viewed through vie ... | Closed | |
|
Task Description
See also: https://qcad.org/rsforum/viewtopic.php?f=33&t=5507
|
|
1730 | QCAD (main) | Bug Report | Low | Point display in a layout / print preview not correct | Closed | |
|
Task Description
Hi Andrew,
When placing a point in a layout it gives an incorrcet display, for example if I place a cross point style I get a rather strange shape in return!
Many thanks
Clive
|
|
1732 | dxflib | Bug Report | Low | Saving dimension with custom text position | Closed | |
|
Task Description
Custom text position must be written as type flag (code 70, flag 128) as well as in style overrides as codes
1070
279
1070
2
|
|
1734 | QCAD (main) | Bug Report | Low | Draw > Text: Color changes for CAD font texts ignored | Closed | |
|
Task Description
Create text using “standard” font with color change (e.g. one letter in the middle red).
|
|
1738 | QCAD (main) | Bug Report | Low | File > Print / PDF Export: shortcut broken in print pre ... | Closed | |
|
Task Description
Load drawing Switch to print preview Ctrl-P / XD have no effect
|
|
1739 | QCAD (main) | Bug Report | Low | Edit Library File doesn't work | Closed | |
|
Task Description
The Edit Library File option in the drop-down menu when you right-click a library item does not work
|
|
1741 | QCAD (main) | Bug Report | Low | Property Editor: titles of block attributes with _ cut ... | Closed | |
|
Task Description
- Create block - Add attribute with tag “MY_ATTR” - Create block reference
- Select block reference - Block attribute of block reference shown as “ATTR”
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5544
|
|
1742 | QCAD (main) | Bug Report | Low | File > Print: printed point size depends on zoom level | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5548
|
|
1744 | QCAD (main) | Bug Report | Low | QCAD crashes when opening .dgn files | Closed | |
|
Task Description
Have tried several samples from the web and the result is the same.
Here is the event log entry: Faulting application name: qcad.exe, version: 3.20.0.0, time stamp: 0x5ad07892 Faulting module name: MSVCR120.dll, version: 12.0.21005.1, time stamp: 0x524f83ff Exception code: 0xc0000409 Fault offset: 0x000000000006dd27 Faulting process id: 0x34d0 Faulting application start time: 0x01d3dbdf73dc50d2 Faulting application path: C:\Program Files\QCAD\qcad.exe Faulting module path: C:\Program Files\QCAD\MSVCR120.dll Report Id: 0644b1d2-d503-4525-ab02-fc36f87288a0 Faulting package full name: Faulting package-relative application ID:
|
|
1745 | QCAD (main) | Bug Report | Low | File > Bitmap Export: thick lines exported thin | Closed | |
|
Task Description
When exporting a drawing under latest version of QCAD, for whatever reason QCAD ignores all line thicknesses and there is no option to fix it. The error is in BitmapExportWorker.js (line 134). It should read:
view.setHairlineMinimumMode(false);
(currently, it uses “true” instead)
|
|
1746 | QCAD (main) | Bug Report | Low | File > Bitmap Export: File base name cut off in file sa ... | Closed | |
|
Task Description
A file with name of 1234.56.78.0001.00 Something blah blah.dxf will not export to bitmap correctly. The save dialog will suggest filename of 1234.56.78.0001.jpg instead, truncating everything after last dot.
This bug existed in older versions too because of incorrect handling of file names. As a result, at some point File.getSaveFileName incorrectly truncates the extension (which is empty at the time) and replaces it with jpg . Appending a null extension fixes this, though obviously it’s not a correct fix.
Here is a temporary workaround in File.js :
File.getInitialSaveAsPath = function(filePath, extension) {
var ret = "";
var fi;
if (isNull(filePath) || filePath.length === 0) {
var mdiChild = EAction.getMdiChild();
var fn;
if (!isNull(mdiChild)) {
fn = stripDirtyFlag(EAction.getMdiChild().windowTitle)
}
else {
fn = "File";
}
fi = new QFileInfo(QDir.homePath());
ret = fi.absoluteFilePath() + QDir.separator + fn + "." + extension + ".nothing"; // Workaround here
} else {
fi = new QFileInfo(filePath);
ret = fi.path() + QDir.separator + fi.completeBaseName() + "." + extension + ".nothing"; // Workaround here
}
return ret;
};
|
|
1748 | QCAD (main) | Bug Report | Low | error when editing block with attributes | Closed | |
|
Task Description
when editing a block and deleting one of the preferred attributes you need to restart the qcad so that the excluded attribute disappears from aba properties when the block is selected;even after synchronizing block attributes
|
|
1749 | QCAD (main) | Feature Request | Low | Add support for non-uniform block scaling | Closed | |
1 |
Task Description
Same txt as on the forum. had a copy because i had to log in 3 times to remark my own post.
Blocks are no solution either.
see pdf [attachment=0]Block test_1.pdf[/attachment]
Antartica is put in a block as segments. Added a rounded corner as segments and as poly. scaled X x0.5 Y x1 origin the center of the magenta circl.
The scaled version is all over the place. Set them to color red, no use they stay black.
The reference of the block is 2000mm to the left because I tried it out far right of my design. The cyan circle is about 400mm in diameter.
dxf part included [attachment=1]Block test.dxf[/attachment]
Version: 3.20.1.0 (3.20.1) Internet: QCAD.org Build Date: Apr 13 2018 Revision: dd51609 Qt Version: 5.5.1 Architecture: i386 Compiler: MSVC++ 10.0 (2010)
CVH
|
|
1752 | QCAD (main) | Bug Report | Low | Not selecting text with sub/superscript | Closed | |
|
Task Description
Found a strange behaviour with formatted text.
File attached. ‘Draw’-selecting only the yellow text with a little space arround it - L>R or R>L ⇒ Yellow text not selected.
‘Draw’-selecting only the yellow text with a little space from R>L but crossing the text half way - Yellow text Selected ⇒ Expected behaviour.
‘Draw’-selecting just including the mentioned little circles. - Orange L>R or R>L ⇒ Normal texts selected ⇒ Expected behaviour - Green L>R Yellow not R>L Yellow selected ⇒ Expected behaviour - Magenta L>R or R>L ⇒ Yellow text not selected ?? - Red L>R or R>L ⇒ Yellow text not selected ??
Version: 3.20.1.0 (3.20.1) Internet: QCAD.org Build Date: Apr 13 2018 Revision: dd51609 Qt Version: 5.5.1 Architecture: i386 Compiler: MSVC++ 10.0 (2010) Windows 7 32-bit
Kind Regards
|
|
1753 | Translation | Bug Report | Low | View > Property Editor: entity types in property editor ... | Closed | |
|
Task Description
Translations in scripts/ts are not loaded (affects splash screen, property editor, default action, various standard messages, some context menus)
|
|
1756 | QCAD (main) | Bug Report | Low | Polyline area wrong if polyline contains arc segments | Closed | |
|
Task Description
The area of polylines with arcs can be incorrect. With only line segments it is correct as far as I can check. See <Poly-line Area.dxf> ; <Poly-arc Area.dxf>
It does not depend on the quadrant their in nor with what point the start point is. It is related with the oriëntation. Flipping or mirroring horizontally induce the error.
Modifications like flip, move & copy may induce another error that locks the oriëntation. It is noticed that the oriëntation property in the editor does not change anymore when reversing. Although locked the value of the area property switches between good and wrong.
The master poly in question is a part of an arc and a part of an ellipse exploded 1024/full. These where recombined to one poly with ‘Create from selection’ and are closed. Closed as per the last vertex does not point to the start point, logically closed I presume. The purpose is to sum the error surface for the skewing math. For now I will use my common sence to distinguish what value is the correct one. Reversing while found faulty is the solution.
Version: 3.20.1.0 (3.20.1) Internet: QCAD.org Build Date: Apr 13 2018 Revision: dd51609 Qt Version: 5.5.1 Architecture: i386 Compiler: MSVC++ 10.0 (2010) Win7 32bit
Regards
|
|
1757 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: on polyline, followed by undo yield ... | Closed | |
|
Task Description
Breaking up self-intersecting Polys at segments crossing can’t be done for the second segment.
Divide: A new node is inserted and made start and end node. For the second segment no division occurs or can be made. Expected is that the segment the nearest to the selecting point is addressed. Eg. the trim command.
Breakout gap: - 1 Part fully trimmend of - Can be undone
Auto trim: (hint: do file-save first to revert) - 1 Part fully trimmend of - Undo will wipe the complete poly
In the file example 1.
Work-arround: - Divide - Insert node on the second segment not at the crossing - Divide at that node - Move new nodes to crossing
QCAD 3.20.1 Win7 32bit Kind Regards
|