QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

ID  descCategoryTask TypeSeveritySummaryStatusProgress
1613QCAD (main)Feature RequestLowAdd Orthogonal Option to Angelur DIM Tool ...Assigned
0%
1 Task Description

... please see below:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

 1612 QCAD (main)Feature RequestLow Multi - Lengthen / Shorten Tool Closed
100%
Task Description

To have an option added to the lengthen / Shorten tool to be able to select more than one entity and do a ‘multi’ lengthen / shorten operation.

 1611 QCAD (main)Feature RequestLow Cabinet projection at 30 degree also Closed
100%
Task Description

Hi Andrew,

Cabinet projections are usually drawn at 45 or 30 degrees, having drawn up many furniture configurations over the years, would it be possible to add options for 45 and 30 degrees at all?

Regards

Clive

 1610 QCAD/CAMPerformance IssueLow Switching from one drawing to another slow Closed
100%
Task Description

When switching from one drawing to another, the 3D view is updated which can be slow, especially for drawings with many text entities.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4945

 1609 QCAD (main)Bug ReportLow Edit > Drawing Preferences: dimension size scale cannot ...Closed
100%
Task Description

Load “Bemassung.dxf” Edit > Drawing Preferences > Dimension > Dimension Settings > Size scale factor: set to 1
Edit > Drawing Preferences > Dimension > Dimension Settings > Size scale factor reverts to 0.5

See:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4926&start=15#p18229

 1608 QCAD (main)Bug ReportMedium Unsupported XData type NOT imported Closed
100%
Task Description

Unsupported XData type NOT imported errors on loading DWG files.
Resulting lines in image are not drawn correctly.
See details and sample file in forum post: https://www.qcad.org/rsforum/viewtopic.php?f=33&p=18223#p18223

1607QCAD (main)SuggestionVery LowIndent 'Spline Segments:' in explode preferencesAssigned
0%
1 Task Description

 FS#1604  was issued because of non-intuitive hierarchy of the preferences for the Explode function.
The task comment recieved explains the funcionallity in details not found elsewhere.

Indentation of the phrase ‘Spline Segments:’ suggest hierarchy.
Graying out the drop down box for the number of spline segments establish hierarchy.

 1606 QCAD (main)Performance IssueLow Selecting 'Draw Order' halts system temporary Closed
100%
Task Description

Merely clicking on ‘Draw Order’, and usualy unintended, halts the system for several seconds up to several tens of seconds.

Intel(R) Core(TM) i7-2600K CPU @ 3.40Ghz
4,00 GB RAM installed 3,49 GB usable
32-bit Operating System
Windows 7 Professional SP1

 1605 QCAD (main)Bug ReportLow Edit > Paste: Empty layers created when pasting to curr ...Closed
100%
1 Task Description

Copy - Paste to current layer from an other drawing creates empty layers, where the entities orininated from, in the drawing where they are pasted to.

 1604 QCAD (main)Bug ReportLow  Exploding splines has equal results disregarding the s ...Closed
100%
Task Description

The explode function preference ‘Spline Segments’ has no influence on the created number of polyline segments any more.

Attached is a file with an example.
The same spline exploded with setting 2-4-8 & 128 segments.
Result for the indicated spline is 59 and constant.

 1603 QCAD (main)Feature RequestLow Curved leader Lines Closed
100%
Task Description

Hi Andrew,

I would like to request an additional option in the dimension tool set to have a curved leader line, could be just the spline tool with an arrow on the end?

Regards

Clive

 1602 QCAD (main)Bug ReportHigh QCAD crashes whenever I use the Help/Check for QCAD Pro ...Closed
100%
Task Description

2016 I Mac running Mac OS X Sierra Ver 10.12.5
Program crashes when I use the “Check for QCad Pro updates” in the “Help” menu
Therefor I cannot update to latest version

QCAD Data
Version:
3.16.5.0 (3.16.5)
Internet:
QCAD.org
Build Date:
Feb 6 2017
Revision:
62420f4
Qt Version:
5.8.0
Architecture:
x86_64
Compiler:
Clang 8.0.0

1601QCAD (main)Feature RequestLowAdd regex to text search & replaceAssigned
0%
Task Description

Add a more versatile way of doing a search and replace for text. Regular expressions maybe?

 1600 QCAD (main)Bug ReportLow File > Save As: Only partial information shown for avai ...Closed
100%
Task Description

Some Linux distributions only show filter strings up to the first “(” in the file dialog.

 1599 QCAD (main)Bug ReportLow Commandline - Can not insert @ - No relative coordinate ...Closed
100%
1 Task Description

Hello,

since 3.17.1 (also on 3.17.2.0) it’s impossible to insert “@” in commandline, so it’s impossible to work with relative coordinates in all funktions like rectangle, line etc.
Please do a fast Bugfix, I need that functionality for workflow urgently :-)

Regards

Andreas

Linux Mint 64bit
Cinnamon
Kernel 4.11.6

QCAD 3.17.2.0

 1598 QCAD (main)Bug ReportLow Open In The Browser doesn't work Closed
100%
Task Description

The option “open in the browser” in the “library browser” doesn’t work on Linux Mint 18.2 (KDE) whose default browser is Dolphin.

 1597 QCAD (main)Bug ReportLow Edit > Convert Drawing Unit: dimension scale override s ...Closed
100%
Task Description

Drawing unit conversion sets the dimension scale override property for all dimensions, even if it was 0 before.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4926

1596QCAD (main)Feature RequestLowView > Selection Filter: add filter for custom properti...Assigned
0%
Task Description

See also:
https://qcad.org/rsforum/viewtopic.php?f=32&t=4840

 1595 dxflibBug ReportLow LWPOLYLINE exports Z values for vertices Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=22&t=4925

https://www.autodesk.com/techpubs/autocad/acad2000/dxf/lwpolyline_dxf_06.htm

1594QCAD (main)Feature RequestLowTool matrix: allow reordering of toolsAssigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923

 1593 QCAD/CAMBug ReportLow CAM > CAM Export: ZH in header always yields default va ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=74&t=4914

 1592 QCAD (main)Bug ReportLow Bold in the text editor causes transaction fail. Closed
100%
Task Description

Using the bold function (button) in the text editor causes transaction fail on new text entries. Emboldening selected text on existing text shows bold in the editor but this does not carry through to drawing or print preview views.

 1591 QCAD (main)Bug ReportCritical Print preview Closed
100%
Task Description

Print preview not fitting paper.
Have not found away to correct even after deleting ~/.config/QCAD/QCAD3.ini

 1590 QCAD (main)Bug ReportLow Dimension settings for the active drawing are not being ...Closed
100%
Task Description

The dimension settings for the active drawing are not being written correctly, it is not possible to change the font of the dimension, it always returns as ‘standard’ when closing and reopening the file, even if another font has been configured for new drawings when changes It will return as ‘standard’. Operting system is Linux Mint.

 1589 QCAD (main)Bug ReportLow Placing parts from library error: wrong parts of item Closed
100%
Task Description

I made a set of places for dip chips. I did not met any problem until I add “bottom” and “top” designation :)

Now if I add to the drawing narrow place first, then wide one, wide place has “top” as narrow, and vice versa: if the wide place is first, then narrow will have wide “cap”. Same is with library items, based on these places... Maybe it is because block of the “top” have same number and are treaten as same?

In the attach you may see library items and two resulting files.

I’m using this version: qcad-3.17.1-trial-linux-x86_32.tar.gz

Thanks!

 1588 QCAD (main)Feature RequestLow "hole" realisation Closed
100%
Task Description

Trying to design PCB with QCad (as hobby ;) I found an inconvenience with routing tracks through holes: I need end one line, snapped to the one edge of contact pad and start new line from other side of the pad, otherwise if line goes through the hole and covers it, hole disappears or becomes damaged; or I need to clean each hole of track parts before printing.

so, subject is: to define a certain area of white or background colour, so if any object (line or other shape) intersects it, it will be just invisible inside this area. they may still be visible, say, in draft mode.

I’ve been thinkig about simpliest way to make it, but not sure. Maybe it can be an additional property of the hatch, or it can be specific “background” solid colour, which can be applied to the hatch (apply this colour to other kind of object is not a good idea).

Then contact pad can be defined as shape with smaller round hatch inside to designate hole, so we can route lines, snapping them to the hole centers, not caring about clearing these holes later of little pieces of tracks.

Maybe it can be usefull :) Thanks for your great work!

1587QCAD (main)Bug ReportVery LowPDF export created with wrong date timeAssigned
0%
Task Description

Hi guys,

when I export my dxf drawing to pdf, the pdf properties shows wrong “created date”. I am in UTC+2, the date shows 2 hours less.
I exported the pdf at 12:24, the attached ps shows 10:24.

BR,
Soma

1586QCAD (main)Feature RequestLowEdit > Application Preferences: Use different color for...Assigned
0%
Task Description

Add preference to use a single, configurable color for all locked layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4879#p17953

 1585 QCAD/CAMBug ReportLow hide/show layer delay Closed
100%
Task Description

Hi !
i’m trying the new qcad/cam 3.17.1 and i have a delay when i hide and show a layer..
(linux MINT 17.2 x64)

The function is working, but the layer will hide (and show) with a delay from click on the apposite button.

The qcad 3.16.7 DON’T have this problem.. when you click on button immediately the layer disappear/show..

 1584 QCAD (main)Bug ReportLow Modify > Divide: dividing polyline at node can lead to  ...Closed
100%
Task Description

- Divide attached polyline at 40,30
- Lower half contains zero length segment at 40,30

 1583 QCAD (main)Bug ReportVery Low Option / Rotation missing defaults for 15 and 345 degre ...Closed
100%
Task Description

... just cosmetic!

The Option drop down list for rotations (e.g. Paste etc) shows all steps incremental for every 15 degree - but 15 and 345 degree are missing.

I’m happy that we don’t have bigger problems!!! :-)

 1582 QCAD (main)Bug ReportLow Layer > Show all Layers / Hide all Layers: unexpected o ...Closed
100%
Task Description

Hi,

if I create in a new drawing a layer list and use the Show all Layers / Hide all Layers function everything works as expected.

If I hide one or more Layers individually and directly in the Layer List (click on the Eye) I can’t make them visible with the Show all Layer function. It looks like individual hidden Layer are protected with a higher priority.

If I load an “old” drawing all individual settings for a hidden Layer are with a higher priority than Show all Layers. If I click every single Eye for each Layer to make them visible then I’m again able to toggle the visibility for all Layer in once.

 1581 QCAD (main)Bug ReportVery Low View > Selection Filter: no inputs for property Linetyp ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4876

 1580 QCAD (main)Bug ReportLow Hatch origin point not saved / loaded correctly Closed
100%
Task Description

Create hatch
Set origin point of hatch pattern to custom coordinate
Save
Load

Hatch offset parameters are unchanged but visual appearance has changed

 1579 QCAD (main)Bug ReportLow Edit > Paste: rotation leads to wrong position of block ...Closed
100%
Task Description

Copy block reference in drawing with one unit (e.g. Inch).
Paste into drawing with other unit (e.g. Millimeter) using a rotation while pasting.

 1578 QCAD (main)Bug ReportLow Dimension scales with linear factors change after savin ...Closed
100%
Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?f=107&t=4593&p=17839#p17835

1577QCAD (main)Feature RequestLowPostfix for DIM / Remember last DIM Label ...Assigned
0%
1 Task Description

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

1576QCAD (main)Feature RequestLowadd option to switch off dialog for modify: rotate tool...Assigned
0%
1 Task Description

To improve the flow of drawing I’d like to switch off the dialog for the rotate tool. Most of the times i use the interactive input and delete the original. So I don’t need to click a popup to acknowledge that.
I allready use the same option for the move/copy tool.

 1575 QCAD (main)Bug ReportLow There are no shortcut entries in the application prefer ...Closed
100%
Task Description

Shortcuts do work except G,Y (and maybe other I don’t know of)

see https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4842

Warning:  Script Exception:
 "TypeError: Result of expression 'ShortcutPreferences.kms.getShortcutMap()' [undefined] is not an object."
Warning:  "<anonymous>(false) at :scripts/Pro/Edit/AppPreferences/ShortcutPreferences/ShortcutPreferences.js:473\nexec() at -1\n<anonymous>() at /home/cccplex/qcad/qcad-3.16.7-pro-linux-x86_64/scripts/Edit/AppPreferences/../AbstractPreferences.js:76\n<eval>() at 1\n<native>() at -1\nmain() at scripts/autostart.js:767\n<global>() at scripts/autostart.js:780"
Linux lennie 4.10.11-1-ARCH #1 SMP PREEMPT Tue Apr 18 08:39:42 CEST 2017 x86_64 GNU/Linux
 1574 QCAD (main)Bug ReportVery Low Layer > Remove: deleting sublayer switches to layer 0 Closed
100%
Task Description

I have set the delete layer preference to make the next layer in the list the current. This will not work for sublayers. After deleting a sublayer the 0 layer will become current.

 1573 QCAD (main)Feature RequestLow add reference point input to copy paste Closed
100%
Task Description

It woul be really handy if there is an option to set the reference point of the copy selection.
Maybe this can be added to the clipboard widget?

 1572 QCAD Community EditionBug ReportLow Dimension font not set to "Standard" when importing thr ...Closed
100%
Task Description

Since updating to QCAD 3.16 on MacOS, my dimension font face suddenly changed to something very unattractive and I can’t figure out how to reset it. I tried deleting QCAD and all references to it in ~/Library and then reinstalling, but no luck. Something weird has gone wrong with QCAD’s fonts.

The font change has made it impossible to open and redraw many DXF files because the new font face is larger and wider spaced and it ruins the layout of many documents.

Attached is an example of what the same DXF file looked like in the prior QCAD version, and the new version. No change to the DXF file.

Dan.

 1571 QCAD (main)Bug ReportLow character map not showing special characters that have  ...Closed
100%
Task Description

I use a font that changes the characters of latin and greek to technical symbols.
http://www.fontspace.com/micronus/y145m-2009 The font is installed and working okee.
But in the text tool → special characters button → others I expect to see this modified character map but instead I see the standard unicode characters.
When I use a gtk tool gucharmap I can see the character map as expected.
Now it is really combersome to enter the special characters.

1570QCAD (main)Feature RequestLowmake the stretch tool more flexible in selecting nodesAssigned
0%
1 Task Description

Stretching multiple points of an entity is not possible to my knowledge. I
can use the stretch tool but this gives me a rectangular selection box and
this limits my posibilities. For example when entities are over eachother.
I hope that in the future this will become more like blender. With a freedraw
selection tool and/or shift clicking multiple nodes.

 1569 QCAD (main)Bug ReportLow File > Print Preview: changing offset in drawing prefer ...Closed
100%
Task Description

In print preview mode I click the button for drawing preferences.
I go to Printing: Page and change the offset for x,y in the viewport.
Then apply but the page has not moved and the autozoom still redirects to the old position.
When I redraw the window through the window manager or quit and reopen the printpreview the page has moved to it spot.

 1568 QCAD (main)Bug ReportLow Issues: Snaps, Trim, Green selection tool Closed
100%
Task Description

Hello,

There is some issues with the snap tool and the selection tool.The trim button only trims some lines but not all.

1. The snap tool does not let me snap to certain things when i select something. For example i will select a box and i will try to extend the corner to another entities corner but the snap is not there so its free and thus not accurate.

2. For some reason the selection tool does not allow me to select certain things. If i have two boxes overlapping and i use the selection tool (from right to left “green selection box”) it does not allow me to select what i want i have to actually click it. This is annoying when it comes to selecting specific things.

3. The trim tool does not work properly.If i want to trim the inside of a cross hair or such, it only allows me to trim the inside of one line and if i try to trim the other it deletes the complete line.

Please fix as soon as possible. Thanks

1567QCAD (main)Feature RequestLowAdd support for separate windowAssigned
0%
1 Task Description

Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already.
That would help a lot when working on multiple files and copying blocks between.

 1566 QCAD (main)Bug ReportLow Block > Attributes > Synchronize Attributes: deleted bl ...Closed
100%
1 Task Description

Deleted (undone) block attributes are stored to DXF/DWG.

 1565 QCAD (main)Bug ReportLow Disappearing blocks. Closed
100%
Task Description

Blocks disappear (or their content does) after creating again with the same name. In attached file:

1) Created cirle
2) Select circle, BC, select center, name is ‘testblock’ 3) Repeat 2) – circle is now gone

 1564 QCAD/CAMBug ReportMedium QCAD/CAM: black main window or main window not painted  ...Closed
100%
Task Description

QCAD/CAM version 3.16.7.1 (snapshot release)

QCAD/CAM version 3.16.7.1 for Ubuntu Linux starts up with a totally black screen with only the title bar showing. By clicking around at the top of the screen I can get the menus to drop down and appear over the blank black screen. That is how I captured all the version information below. QCAD/CAM version: 3.15.5.0 for Ubuntu Linux starts with all the normal screen graphics appearing normally. I labeled this bug report as critical because QCAD/CAM is unusable on Ubuntu Linux, but for me it is not so critical since I can use the Windows version.

Versions
QCAD version: 3.16.7.1
Date: Mar 22 2017
Qt version: 5.8.0
Compiler version: gcc 4.8.1
Build Date: Mar 22 2017
Revision: 17a80fac27c3ae6aa68cd4ee15ffa4f3e2ab0a9a

Architecture: x86_64
OS: Linux
OS version: Unknown

Locale
QCAD locale: en
Name: en_US
Country: 225
Country name: United States
Language: 31
Language name: American English
Script: 7
Script name: Latin
Decimal point: 46
Negative sign: 45
Positive sign: 43
Text direction: 0
System codec: UTF-8

Arguments: /home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/qcad-bin

Plugins
Description=CAM tools.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadcamscripts.so
ID=CAM
License=Proprietary
Name=CAM
NamePostfix=/CAM
PurchaseURL=http://ribbonsoft.com/add-ons/qcadcam-purchase QtVersion=5.8.0
SplashOverride=:/scripts/Cam/splashscreen.png
SplashOverride@2x=:/scripts/Cam/splashscreen@2x.png
URL=http://ribbonsoft.com/add-ons/qcadcam Version=3.16.7.1

FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcaddwg.so
ID=DWG
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
SystemCodePage=0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1 (Teigha® 4.02.2.0)

Description=Import/export support for the DXF format. Based on dxflib.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcaddxf.so
ID=DXF
License=GPLv2+
Name=DXF
QtVersion=5.8.0
URL=http://www.qcad.org Version=3.16.7.1 (dxflib 3.12.2.0)

Description=OpenGL ES 3D display.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadgles3d.so
ID=GLES
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=Integrated help browser.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadhelp.so
ID=HELP
License=Proprietary
Name=QCAD Pro
QtVersion=5.8.0
URL=http://www.ribbonsoft.com Version=3.16.7.1

Description=Polygon clipping, boolean polygon operations, path offset.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadpolygon.so
ID=POLYGON
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=QCAD Professional tools.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadproscripts.so
ID=PROTOOLS
License=Proprietary
Name=QCAD Pro
NamePostfix= Professional
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Description=Polygon triangulation.
FileName=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/plugins/libqcadtriangulation.so
ID=TRIANGULATION
License=Proprietary
Name=QCAD Pro
PurchaseURL=http://ribbonsoft.com/add-ons/qcadpro-purchase QtVersion=5.8.0
URL=http://ribbonsoft.com/add-ons/qcadpro Version=3.16.7.1

Environment
LC_TIME=en_US.UTF-8
DESKTOP_SESSION=default
SSH_AGENT_PID=1743
XMODIFIERS=@im=ibus
LOGNAME=dave
QT_ACCESSIBILITY=1
PAPERSIZE=letter
HOME=/home/dave
LC_NUMERIC=en_US.UTF-8
XDG_DATA_DIRS=/usr/share/default:/usr/share/gnome:/usr/local/share/:/usr/share/:/var/lib/snapd/desktop
XDG_VTNR=2
SHELL=/bin/bash
XDG_SEAT=seat0
GIO_LAUNCHED_DESKTOP_FILE=/home/dave/Desktop/Ribbonsoft-qcad.desktop
WINDOWPATH=2
QT_IM_MODULE=ibus
XDG_SESSION_TYPE=x11
XDG_RUNTIME_DIR=/run/user/1000
LC_MEASUREMENT=en_US.UTF-8
LC_TELEPHONE=en_US.UTF-8
XDG_CURRENT_DESKTOP=GNOME
UNICODEMAP_JP=cp932
DEFAULTS_PATH=/usr/share/gconf/default.default.path
LC_PAPER=en_US.UTF-8
XAUTHORITY=/run/user/1000/gdm/Xauthority
LC_ADDRESS=en_US.UTF-8
LC_IDENTIFICATION=en_US.UTF-8
QT_STYLE_OVERRIDE=gtk
LC_NAME=en_US.UTF-8
GIO_LAUNCHED_DESKTOP_FILE_PID=13310
LC_MONETARY=en_US.UTF-8
XDG_SESSION_DESKTOP=default
GTK_MODULES=gail:atk-bridge
XDG_MENU_PREFIX=gnome-
XDG_SESSION_ID=1
QT_LINUX_ACCESSIBILITY_ALWAYS_ON=1
XDG_CONFIG_DIRS=/etc/xdg/xdg-default:/etc/xdg
DISPLAY=:1
LD_LIBRARY_PATH=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64
PWD=/home/dave
USER=dave
SHLVL=1
_=/home/dave/opt/qcadcam-3.16.7.1-pro-linux-x86_64/qcad-bin
MANDATORY_PATH=/usr/share/gconf/default.mandatory.path
LANG=en_US.UTF-8
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-S2ePMZG3dG,guid=e590a63ac7ca3b971f776cae58d663c0
GDMSESSION=default
GNOME_DESKTOP_SESSION_ID=this-is-deprecated
SESSION_MANAGER=local/OPA:@/tmp/.ICE-unix/1681,unix/OPA:/tmp/.ICE-unix/1681
USERNAME=dave
PATH=/home/dave/bin:/home/dave/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin

Showing tasks 151 - 200 of 1763 Page 4 of 36<<First - 2 - 3 - 4 - 5 - 6 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing