QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
 457 QCAD (main)Bug ReportLow Print page set up! Closed
100%
Task Description

Windows 7 - 64

Via - edit>drawing preferences or Application preferences>print page set up, it seems to make no difference setting the page orientation to either “Portrait” or “landscape” because when you go to print preview the set up you previously set doesn`t overide and set the orientation “set buttons” in print preview, so you have to manually set the orientation for the page you want to print from here (in print preview) regardless of the previously “preferenced” set up.

regards

Clive

 458 QCAD (main)Bug ReportLow Hatch: ellipse segments Closed
100%
Task Description

Hatch ellipse segments with cw direction saved as ccw.

 459 QCAD (main)Bug ReportLow Bitmap Export is Cropping a few pixels too many from bo ...Closed
100%
Task Description

When exporting bitmap images the crop is just a bit too tight, and is resulting in lost parts of the drawing. In QCAD2 there was a very small padding of pixels around the exported object that prevented that problem.

 460 QCAD (main)Bug ReportLow doubleclick/select truetype font problems Closed
100%
Task Description

truetype fonts are more difficult to use than regular fonts. The do not select easily.

 461 QCAD (main)Bug ReportMedium QCAD3 rc2 Opening DXF Created by 2.2.2 Block Position I ...Closed
100%
Task Description

When opening a DXF created by 2.2.2 the block entities are sometimes not being drawn in correct position and orientation.

The following is seen on the console (Which I think is related)

Debug: importing entities in block ' “Sw1pwo” '
Warning: RDwgBlockReferenceImporter::import: block reference references invalid block: “*X15”

and also (which is probably not related)
Debug: importing entities in block ' “A$C6329746C” '
Warning: RSpline::updateFromControlPoints: not enough control points: 0
Warning: RSpline::getExploded: invalid spline
Debug: RSpline: knotVector ignored
Debug: RSpline: knots: 11
Debug: RSpline: order: 4
Debug: RSpline: controlPoints: 7
Warning: RSpline::updateFromControlPoints: not enough control points: 0
Warning: RSpline::getExploded: invalid spline
Debug: RSpline: knotVector ignored
Debug: RSpline: knots: 11
Debug: RSpline: order: 4
Debug: RSpline: controlPoints: 7

Drawing file shown.

This could be a bug in 2.2.2, but it would be nice to ensure 3 can pull in old drawings without us having to rework them all.

Any questions james at enrogen dot com.

James

 462 QCAD (main)Bug ReportLow Wrong zoomlevel by open with double click Closed
100%
Task Description

When i open a dxf with a double click in my windows-explorer the drawing views very very small.
(win7/64/ger, qcad3 RC3)

 463 QCAD (main)Bug ReportLow Cannot edit drawing open with doubleclick Closed
100%
Task Description

The buttons and menues greyed when i open a drawing with doubleclick from windows-explorer (viewer-mode?).
When qcad opened manually and doubleclick a other drawing qcad open this in edit-mode.

 464 QCAD (main)Bug ReportLow select not possible in zoom Closed
100%
Task Description

if drawing is zoomed too much, it is impossible to select a line with a single click (workaround: use area select)

 465 QCAD (main)Bug ReportLow hatch with pattern empty (solid ok) Closed
100%
Task Description

valid hatch is not visible if filled with pattern instead of solid fill

 466 QCAD (main)Bug ReportLow unwanted auto-inserted layer on save Closed
100%
Task Description

after saving with qcad3 and re-opening, sometimes there is an additional layer “Defpoints” for unknown reason (qcad2 did not, qcad3 does not always)

 468 QCAD (main)Bug ReportLow hatch not existing after save+reopen Closed
100%
Task Description

After several hints (see IDs 464 and 465) I removed all non-zero Z-coordinates inside a dxf, so hatches seem to work even with pattern now. But after save and re-open, the hatch is not existing anymore (even with select all).

 469 QCAD (main)Bug ReportLow Solid entity properties Closed
100%
Task Description

Split from  FS#465  by Stefan:

After more testing, it seems that a solid triangle causes trouble, perhaps correlated to Z-coordinates and the property editor.

Attached you find a dxf example file with only 7 objects. Three noticable cases:
- Selecting all and change Selection in the property editor to “Solid” flips to “No Selection” although objects selected.
- Selecting all and change Selection in the property editor to “Line” shows “Length” and “Angle” in Geometry with “*VARIES*” values although only one line is selected.
- Selecting all but the solid object (6 objects selected now), everything works as expected, in particular Selection “Line” shows valid values (and Z-coordinate 0).

I hope this helps, please give instructions how to help if necessary.

 470 QCAD (main)Bug ReportLow Copy/paste results in Z!=0 Closed
100%
Task Description

Split from  FS#465  by Stefan:

Copy+Paste with paste in a new drawing results in Z=-13.6... which caused the problems of pattern-hatch and select-impossible.

 472 QCAD (main)Bug ReportLow Library Browser Problems Closed
100%
Task Description

When using the Library Browser and I attempt to make a drawing a ‘favorite’in the browser it opens the ‘Qt Script Debugger’ and shows the following message: Uncaught exception at C:/Program Files/QCAD Professional/scripts/Tools/LibraryBrowser\db/DirectoryPeer.js:209: TypeError: Result of expression ‘source’ [undefined] is not an object.

A similar error happened every time I would try and open the Library Browser. I uninstalled and re installed but it didn’t fix it. I followed the advice in one of the forums on how to reset to default configuration and this seemed to fix it.

 473 QCAD (main)Bug ReportLow Move, restricted horizontal, intersection .... Closed
100%
Task Description

Move/Copy doesn’t work with the combination restricted horizontal and snap to intersection manually.

 474 QCAD (main)Bug ReportLow Save as of loaded file should save to same folder Closed
100%
Task Description

‘Save as’ of loaded file should save to same folder as loaded file.

 475 QCAD (main)Bug ReportHigh Mac OSX 10.6.8 frequent crashes Closed
100%
Task Description

I’m getting frequent crashes for no apparent reason, in a variety of commands. Sorry, Qcad 3 is unusable for me at the moment.

 476 QCAD (main)Bug ReportLow Stretching dimension Closed
100%
Task Description

Draw a horizontal dimension. Stretch (S S) it. The label remains in place. It should instead go to the new center. (Unless it was manually positioned perhaps...)

Workaround: Pick one extension and drop it to where it was, label gets centered.

 478 QCAD (main)Bug ReportHigh crash on "Draw" - "Insert Bitmap" Closed
100%
Task Description

Selecting “Draw” and “Insert Bitmap” from the menu shows file dialog “Import Bitmap” for a split second and then crashes completely with segmentation fault.

Running Ubuntu Linux 10.04 LTS with QCad3 rc2.

Console output:
Debug: updateScenes...
Debug: updateGuiActions...
Debug: notifyListenersSlot...
Warning: RScriptHandlerEcma::createActionDocumentLevel(): “scripts/Snap/RestrictOff/RestrictOff.js” : Engine is busy. Aborting...
Warning: RScriptHandlerEcma::createActionDocumentLevel(): “scripts/Snap/SnapAuto/SnapAuto.js” : Engine is busy. Aborting...
/opt/qcad-3.0.0-rc2-prof-linux/qcad: line 35: 5905 Segmentation fault LD_LIBRARY_PATH=”$DIR” “$binary” $OPT1 $OPT2 “$@”

 479 QCAD (main)Bug ReportLow Fehler in der Textfunktion Closed
100%
Task Description

Textfuntion:

Rufe ich die Funktion “Text” auf und schreibe einen Text wird dieser unwiderruflich gelöscht bzw. durch einen vorherigen Text ersetzt wenn ich danach etwas im “Main Font” verändere.
“Text Geometry” und “Alignment” funktioniert.

 480 QCAD (main)Bug ReportLow Libraries not found, Bash 4 Closed
100%
Task Description

GNU bash, version 4.2.10(1)-release (i686-pc-linux-gnu)
Linux Mint 12

Issues with the ./qcad launch script:
- passing parameters, e.g. -style plastique
- LD_LIBRARY_PATH not set properly

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1814&start=15

 481 QCAD (main)Bug ReportLow data points display as either a dot (.) or a plus sign  ...Closed
100%
Task Description

data points display as either a dot (.) or a plus sign (+) on output to pdf or printer. There appears to be no constancy or control over the behaviour. Any way it could be forced to behave like Qcad-2 (i.e. line-weight controlled dot (.) ???

 483 QCAD (main)Bug ReportLow Return value of autostart applications Closed
100%
Task Description

Whe qcad runs a script from the autostart command line argument, then, if this script ends with an error, the qcad main function should not return 0, but something different, because the return value of 0 is conventionally used to indicate successful operation.

I enter this as a bug, rather than a feature request, because this convention is so entrained (at least in *NIX land), that it breaks fundamental expecations on application behaviour.

 484 QCAD (main)Bug ReportLow No diameter symbol under Windows Closed
100%
Task Description

Windows fonts don’t show Unicode character 0×2300 correctly. This applies for GUI elements (e.g. combo box in options tool bar) as well as rendered text in a drawing.

 485 QCAD (main)Bug ReportLow ISO project: solid fills Closed
100%
Task Description

Solid fills projected as outlline

 486 QCAD (main)Bug ReportLow Property editor: orphaned line edit Closed
100%
Task Description
  1. select hatch
  2. click “+” in property editor to move selection to new layer
  3. enter new layer name
  4. OK
 487 QCAD (main)Bug ReportLow QCad 3.0 RC2 on Mac Leopard - status bar font is tiny, ...Closed
100%
Task Description

QCad 3.0 RC2 on a Mac Leopard 10.5 (MacBook). Everything seems to work OK, but the lower left corner status bar text is in an incredibly tiny font, basically unusable. Same version of QCad on the Bootcamp/XP side of the MacBook is readable.

But I can’t find a preferences setting on either for the font size. On the old version it’s easy to find, but I think it got left out somehow on 3.0.

 489 QCAD (main)Bug ReportLow Application Preferences - Show Crosshairs not work. Closed
100%
Task Description

In the “Preferences Panel” → “Graphics View” the checkbox “Show Crosshairs” not work. If it’s checked or unchecked the result is the same.

 490 QCAD (main)Bug ReportVery Low Mac Property Editor Layout problem. Closed
100%
Task Description

With Mac OS X 10.5.8 PPC, in the Property Editor the entries are aligned at the bottom and not in the center. The strange is that in your screenshots on the site everything is correct (http://www.qcad.org/img/qcad3_mac.png). Add a picture for the problem.

 492 QCAD (main)Bug ReportLow Snap to intersection manual in block references Closed
100%
Task Description

Wenn ich versuche einen Block zu verschieben mit dem Ziel “Intersection manual” wird nicht die im Block ausgewählte Linie benutzt sondern alle im Block befindlichen Linien die eine “Intersection manual” ermöglichen würden.

Auch die visuelle Auswahlerleichterung einer Linie (Farbe ändert sich beim drüberfahren mit der Maus) wird im Block nicht unterstützt :(

 493 QCAD (main)Bug ReportVery Low Bug File's Name Closed
100%
Task Description

If in the file’s name I’ve “/” (for ex. 2012/02/10) QCAD substite with “:” (2012:02:10). Regard the file’s name in the tab of QCAD.

 494 WebsiteBug ReportVery Low QCAD 3 it's also for Apple PPC! Closed
100%
Task Description

In the website → http://www.qcad.org/qcad3.html
lacks compatibility with Leopard 10.5.8 PPC. I chose QCAD for this ... ;-)

 495 QCAD (main)Bug ReportLow Long operations: no terminate Closed
100%
Task Description

Tool that trigger long operations (e.g. rotate with complex entities, angle 1, 359 copies) can sometimes not be terminated after the operation is finished.

 496 QCAD (main)Bug ReportVery Low Error in Application Preferences -> Default Dimension S ...Closed
100%
Task Description

In the Application Preferences (but also in the Drawings Preferences) → Dimension → Default Dimension Settings → Label Format → Linear (and Angular) Dimension → Show Trailing Zeros, the example is wrong if the option is checked.

 497 QCAD (main)Bug ReportMedium Trim: Tangent on circle: debugger appears Closed
100%
Task Description

having a line tangent on a circle, the Qt Debugger appears when:
- select trim tool
- select line
- mouse over circle

The debugger stops in line 326 of scripts/Modify/Trim/Trim.js (trimmed1.trimStartPoint(is2);) with the following message:
Uncaught exception at scripts/Modify/Trim/Trim.js:326: Error: :-1:-1: Wrong number/types of arguments for RArcEntity.trimStartPoint().
<native>(undefined) at -1
<anonymous>(op = RMixedOperation(0xe50a9a0), limitingEntity = RLineEntityPointer(0xff9b740), limitingShape = RLine(RShape(address: “0xe2a1608”), startPoint: RVector(36379.7, 46367.3, 0) , endPoint: RVector(40858.6, 44174.7, 0) ) , limitingPos = RVector(37446.8, 45886.1, 0) , trimEntity = RCircleEntityPointer(0xefa0170), trimPos = RVector(37054.5, 45938.9, 0) , trimBoth = false, preview = true) at scripts/Modify/Trim/Trim.js:326
<anonymous>(preview = true) at scripts/Modify/Trim/Trim.js:186
<anonymous>() at /opt/qcad-3.0.0-rc2-prof-linux/scripts/Modify/../EAction.js:1162
<anonymous>(event = REntityPickEvent(0xbfdc3614), preview = true) at scripts/Modify/Trim/Trim.js:166
<anonymous>(event = REntityPickEvent(0xbfdc3614)) at /opt/qcad-3.0.0-rc2-prof-linux/scripts/Modify/../EAction.js:1237
<global>() at -1
326 trimmed1.trimStartPoint(is2);
Uncaught exception at scripts/Modify/Trim/Trim.js:326: Error: :-1:-1: Wrong number/types of arguments for RArcEntity.trimStartPoint().
<native>(undefined) at -1
<anonymous>(op = RMixedOperation(0xec6fea8), limitingEntity = RLineEntityPointer(0×11830730), limitingShape = RLine(RShape(address: “0x10c1c988”), startPoint: RVector(36379.7, 46367.3, 0) , endPoint: RVector(40858.6, 44174.7, 0) ) , limitingPos = RVector(38065.4, 45591.8, 0) , trimEntity = RCircleEntityPointer(0xeee04a0), trimPos = RVector(37145, 45818.2, 0) , trimBoth = false, preview = true) at scripts/Modify/Trim/Trim.js:326
<anonymous>(preview = true) at scripts/Modify/Trim/Trim.js:186
<anonymous>() at /opt/qcad-3.0.0-rc2-prof-linux/scripts/Modify/../EAction.js:1162
<anonymous>(event = REntityPickEvent(0xbfdc3614), preview = true) at scripts/Modify/Trim/Trim.js:166
<anonymous>(event = REntityPickEvent(0xbfdc3614)) at /opt/qcad-3.0.0-rc2-prof-linux/scripts/Modify/../EAction.js:1237
<global>() at -1

 499 QCAD (main)Bug ReportMedium hatch does not save Closed
100%
Task Description

When adding a hatch in a drawing, the hatch is vissible and printable but after saving and closing some of the hatches have dissapeared when reopening the drawing.

After several attempts the same hatches in the same objects always dissapear or are not saved.

When needed i can send the drawing, please let me now!

 506 QCAD (main)Bug ReportLow Command line option -quit Closed
100%
Task Description

Crash when launching QCAD with -quit option:

./qcad -quit
 507 QCAD (main)Bug ReportLow Support reversed planes for all entities (currently onl ...Closed
100%
Task Description

See RDwgEllipseImporter::import

 509 QCAD (main)Bug ReportLow Crash when resizing command line size Closed
100%
Task Description

Crash in QVariantAnimation.

Potential fix: configure Qt with -D QT_NO_ANIMATION

TODO: check on other platforms

 510 QCAD (main)Bug ReportMedium paste between layers always indicates "locked Layer" Closed
100%
Task Description

1. copy an item from one layer
2. add new layer
3. attempt to paste into new layer

Error message:
“Trying to draw on or modify entities on a locked layer”

The layer is not locked as I can draw into it...
Also tried turning lock “on” and then “off” again; still same message.

 511 QCAD (main)Bug ReportLow Hatch fails with multiple full-ellipse islands Closed
100%
Task Description

Hatch fails with more than one full-ellipse islands

See fs511.dxf

 515 QCAD (main)Bug ReportMedium File - Save / Save as: Null Object ID Closed
100%
Task Description

“Null Object ID” exception when saving a previously loaded file.

File: “fs515.dwg”

 518 QCAD (main)Bug ReportMedium Unable to use Library browser properly in RC4 Closed
100%
Task Description

Hi Andrew

In Ubuntu 11.10 and Windows 7 everything so far is working ok in QCAD apart from the Library browser!

1.In Win 7-64 I can run the browser and make a new folder, but when I try to set the permissions/open the folder - browser crashes.

2.In ubuntu 11.10 I first uninstalled RC2 then installed RC4. QCAD program runs ok but this time when I try to open up the browser (not a new folder)I get an error message stating that I do not have permissions to open the first file (vehicle -I think!)in RC2? If I select OK in the warning window the warning just keeps on repeating the same message for the next and subsequent files until I quit it.

 520 QCAD (main)Bug ReportMedium move entity from command line is broken on ubuntu 64 bi ...Closed
100%
Task Description

when I try to move an entity via the command line using the mv command the entity does not move to the specified position. it works if i use the mouse. this was fine in rc2 and rc3 ubuntu 64 bit and windows 64 bit machines.

 521 QCAD (main)Bug ReportLow dwg2pdf lost output with RC4 Closed
100%
Task Description

Previous working example script dwg2pdf creates empty pdf with QCad 3 RC4.
File size matches output of dwg2pdf in RC2, but output was ok in RC2.

 522 QCAD (main)Bug ReportLow  View > toolbars is only accessible by right clicking. Closed
100%
Task Description

Andrew

In Windows 7-64, the view > toolbar options are only available by ‘right clicking’ in the main menu somewhere. They are not included in the view ‘drop down’ menu!

 524 QCAD (main)Bug ReportHigh Debugger appears when using lengthen tool Closed
100%
Task Description

When attempting to use the Lengthen tool, the Qt Script Debugger was activated. The following exception was noted:

Welcome to the Qt Script debugger.
Debugger commands start with a . (period).
Any other input will be evaluated by the script interpreter.
Type “.help” for help.

Uncaught exception at scripts/Modify/Lengthen/Lengthen.js:137: TypeError: Result of expression ‘this.entity.trimStartPoint’ [undefined] is not a function.
137 this.entity.trimStartPoint(is);

The application then crashed and report was sent to Apple.

 526 QCAD (main)Bug ReportLow Qt Debugger appears right clicking view widget Closed
100%
Task Description

Right clicking at “view list” widget list results in Qt Debugger appearing with message

Uncaught exception at /opt/qcad-3.0.0-rc4-prof-linux/scripts/Widgets/ViewList/ViewList.js:46: TypeError: Result of expression ‘RGuiAction.getByScriptFile(”scripts/View/Remove/RemoveView.js”)’ [null] is not an object.
46 RGuiAction.getByScriptFile(”scripts/View/Remove/RemoveView.js”).addToMenu(menu);

 529 QCAD (main)Bug ReportLow move tool moves entities to mouse position instead of c ...Closed
100%
Task Description

Sometimes (60%, unknown reason) the move tool MV moves the selected entities to the current mouse position (after the final “ok” click at the move properties dialog) instead of click position of target (before the move properties dialog).

 530 QCAD (main)Bug ReportMedium sporadic unwanted close of QCad Closed
100%
Task Description

Using the move and scale tools, QCad sometimes (reason unknown so far) crashes in RC4 (never seen that in RC2).

Showing tasks 401 - 450 of 1809 Page 9 of 37<<First - 7 - 8 - 9 - 10 - 11 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing