|
1 | QCAD (main) | Bug Report | Very Low | Sample Task | Closed | |
|
Task Description
This isn’t a real task. You should close it and start opening some real tasks.
|
|
4 | Book | Bug Report | Medium | Book "CAD Instruction" layout issues | Closed | |
1 |
Task Description
Post all kind of layout issues for the book “CAD Instruction” here, e.g. overlapping text.
|
|
5 | QCAD (main) | Bug Report | Medium | print preview: paper disappears on focus out / in | Closed | |
|
Task Description
when changing the window focus, the paper in the print preview disappears and doesn’t come back anymore
|
|
7 | QCAD (main) | Bug Report | High | layer list not cleared when closing drawing | Closed | |
|
Task Description
new drawing
add layer named “layer 1”
close drawing
the layer list still shows 2 layers, “0” and “layer 1”, but should be empty
|
|
8 | QCAD (main) | Bug Report | Medium | Text Dialog: custom text height broken | Closed | |
|
Task Description
Custom text height cannot be set (enter closes the dialog, tab does not activate the entered text height)
|
|
9 | QCAD (main) | Bug Report | Low | RSettings.setValue() doesn't work for "GraphicsViewColo ... | Closed | |
|
Task Description
Context: Needed to set color settings for book images.
"GraphicsViewColors/BackgroundColor""GraphicsViewColors/MetaGridColor"
QCAD3.conf:
BackgroundColor=@Variant(\0\0\0\x7f\0\0\0\aRColor\0\x1\xff\xff\0\0\0\0\0\0\0\0\0\x2)
MetaGridColor =@Variant(\0\0\0\x7f\0\0\0\aRColor\0\x1\xff\xff\xff\xff\xfe\xfe\xfd\xfd\0\0\0\x2)
Setting the alpha channel value and the color mode for RColor doesn’t change anything. Using view.setBackgroundColor() instead works for the background color, but not for other colors such as the meta grid color.
|
|
10 | Book | Bug Report | Low | Book numbering in PDF is incorrect | Closed | |
|
Task Description
The numbers in the book don’t match with the bookmarks numbers in the PDF as shown in Acrobat Reader.
|
|
15 | QCAD (main) | Bug Report | Critical | new created drawing can't be loaded | Closed | |
|
Task Description
create new drawing
draw a line
save it as DWG or DXF
close it
re-open it → nothing is shown, nothings is selectable
no obvious errors or warnings in the console output
|
|
16 | QCAD (main) | Bug Report | High | SIGABRT while saving ellipse as DXF | Closed | |
|
Task Description
new drawing
draw ellipse
save as DXF
Fatal: ASSERT: “false” in file RDwgExporter.cpp, line 141
gdb Debugger (4/18/11 11:45 AM) (Suspended)
Thread [1] (Suspended: Signal 'SIGABRT' received. Description: Aborted.)
60 __kernel_vsyscall() 0xffffe424
59 raise() 0xb50ed7ff
58 abort() 0xb50ef140
57 RMainWindow::messageHandler() /home/martin/workspace/rsframework/src/core/RMainWindow.cpp:63 0x08dc54de
56 qt_message_output() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/global/qglobal.cpp:2205 0xb553f283
55 qt_message() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/global/qglobal.cpp:2305 0xb553f477
54 qFatal() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/global/qglobal.cpp:2488 0xb553f589
53 qt_assert() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/global/qglobal.cpp:2004 0xb553f615
52 RDwgExporter::exportFile() /home/martin/workspace/rsframework/src/io/dwg/RDwgExporter.cpp:141 0x08c68b7a
51 RDocumentInterface::exportFile() /home/martin/workspace/rsframework/src/core/RDocumentInterface.cpp:945 0x08d9debd
50 REcmaDocumentInterface::exportFile() /home/martin/workspace/rsframework/src/scripting/ecmaapi/REcmaDocumentInterface.cpp:2840 0x0887607c
49 QScript::FunctionWrapper::proxyCall() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/script/bridge/qscriptfunction.cpp:82 0xb6b10edb
48 QTJSC::NativeFuncWrapper::operator() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/runtime/CallData.cpp:46 0xb6a03409
47 QTJSC::cti_op_call_NotJSFunction() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/jit/JITStubs.cpp:1771 0xb69d0697
46 <symbol is not available> 0xacec60ff
45 execute() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/jit/JITCode.h:79 0xb69742f3
44 QTJSC::Interpreter::execute() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/interpreter/Interpreter.cpp:716 0xb69742f3
43 QTJSC::JSFunction::call() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/runtime/JSFunction.cpp:122 0xb6a2e3ec
42 QTJSC::call() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/runtime/CallData.cpp:62 0xb6a034be
41 QScriptValue::call() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/script/api/qscriptvalue.cpp:1599 0xb6b08094
40 REcmaShellActionAdapter::beginEvent() /home/martin/workspace/rsframework/src/scripting/ecmaapi/REcmaShellActionAdapter.cpp:125 0x08b7974d
39 RDocumentInterface::setCurrentAction() /home/martin/workspace/rsframework/src/core/RDocumentInterface.cpp:267 0x08d9beae
38 RScriptHandlerEcma::createActionDocumentLevel() /home/martin/workspace/rsframework/src/scripting/ecma/RScriptHandlerEcma.cpp:771 0x0874e2be
37 RGuiAction::slotTrigger() /home/martin/workspace/rsframework/src/core/RGuiAction.cpp:575 0x08db7095
36 RGuiAction::qt_metacall() /home/martin/workspace/rsframework/src/core/debug/moc_RGuiAction.cpp:86 0x08dfeb75
35 QMetaObject::metacall() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/kernel/qmetaobject.cpp:237 0xb56454fa
34 QMetaObject::activate() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/kernel/qobject.cpp:3272 0xb5654f8d
33 QAction::triggered() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/.moc/release-shared/moc_qaction.cpp:263 0xb59c59b9
32 QAction::activate() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/kernel/qaction.cpp:1256 0xb59c5c1b
31 QMenuPrivate::activateCausedStack() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/widgets/qmenu.cpp:993 0xb5e5a4ad
30 QMenuPrivate::activateAction() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/widgets/qmenu.cpp:1085 0xb5e60fc3
29 QMenu::mouseReleaseEvent() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/widgets/qmenu.cpp:2301 0xb5e61e9e
28 QtScriptShell_QMenu::mouseReleaseEvent() 0xb1b72feb
27 QWidget::event() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/kernel/qwidget.cpp:8187 0xb5a25df4
26 QMenu::event() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/widgets/qmenu.cpp:2410 0xb5e62377
25 QtScriptShell_QMenu::event() 0xb1b7621b
24 QApplicationPrivate::notify_helper() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/kernel/qapplication.cpp:4396 0xb59cc864
23 QApplication::notify() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/kernel/qapplication.cpp:3959 0xb59d5bf9
22 QCoreApplication::notifyInternal() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/kernel/qcoreapplication.cpp:732 0xb563edfb
21 sendSpontaneousEvent() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/kernel/qcoreapplication.h:218 0xb59cd7d2
20 QApplicationPrivate::sendMouseEvent() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/kernel/qapplication.cpp:3056 0xb59cd7d2
19 QETWidget::translateMouseEvent() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/kernel/qapplication_x11.cpp:4337 0xb5a56224
18 QApplication::x11ProcessEvent() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/kernel/qapplication_x11.cpp:3536 0xb5a545a7
17 QEventDispatcherX11::processEvents() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/gui/kernel/qeventdispatcher_x11.cpp:132 0xb5a7ddcb
16 QEventLoop::processEvents() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/kernel/qeventloop.cpp:149 0xb563e139
15 QEventLoop::exec() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/kernel/qeventloop.cpp:201 0xb563e382
14 QCoreApplication::exec() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/corelib/kernel/qcoreapplication.cpp:1009 0xb5642c7f
13 qtscript_QCoreApplication_static_call() 0xb21dc4b7
12 QScript::FunctionWrapper::proxyCall() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/script/bridge/qscriptfunction.cpp:82 0xb6b10edb
11 QTJSC::NativeFuncWrapper::operator() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/runtime/CallData.cpp:46 0xb6a03409
10 QTJSC::cti_op_call_NotJSFunction() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/jit/JITStubs.cpp:1771 0xb69d0697
9 <symbol is not available> 0xb2907ff8
8 execute() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/jit/JITCode.h:79 0xb69762d2
7 QTJSC::Interpreter::execute() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/interpreter/Interpreter.cpp:886 0xb69762d2
6 QTJSC::Interpreter::execute() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/3rdparty/javascriptcore/JavaScriptCore/interpreter/Interpreter.cpp:803 0xb697655a
5 QScriptEnginePrivate::evaluateHelper() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/script/api/qscriptengine.cpp:1359 0xb6ae305f
4 QScriptEngine::evaluate() /home/martin/opt/qt-everywhere-opensource-src-4.7.0/src/script/api/qscriptengine.cpp:2606 0xb6aeb1b5
3 RScriptHandlerEcma::doScript() /home/martin/workspace/rsframework/src/scripting/ecma/RScriptHandlerEcma.cpp:677 0x0874da94
2 RScriptHandler::init() /home/martin/workspace/rsframework/src/core/RScriptHandler.cpp:31 0x08de1f32
1 main() /home/martin/workspace/rsframework/src/gui/qtsingleapplication-2.6_1-opensource/examples/console/main.cpp:139 0x0874797f
|
|
17 | ECMAScript | Bug Report | Low | RLineEntityPointer doesn't work as function argument of ... | Closed | |
|
Task Description
Script code (SvgExporter.js):
245 // only export entities on main block "*Model_Space":
246 if (realEntity.getBlockId() == this.doc.getBlockId("*Model_Space")) {
247 RFileExporterAdapter.prototype.exportEntity.call(this, entity, false);
248 }
Script debugger exception:
Uncaught exception at /home/martin/workspace/rsframework/scripts/File/SvgExport/SvgExporter.js:246:
Error: :-1:-1: RExporter: Argument 0 is not of type REntity*.
<native>(RLineEntityPointer(0xb6fb158), false) at -1
<anonymous>(entity = RLineEntityPointer(0xb6fb158), preview = false) at
/home/martin/workspace/rsframework/scripts/File/SvgExport/SvgExporter.js:246
<anonymous>() at /home/martin/workspace/rsframework/scripts/File/SvgExport/SvgExporter.js:211
Workaround: Used exportEntity() with ID as argument instead. However there may be other cases where no alternative method is available.
RFileExporterAdapter.prototype.exportEntity.call(this, realEntity.getId());
|
|
18 | QCAD (main) | Bug Report | Low | LineRectangleSize.js: options tool bar: alignment point ... | Closed | |
|
Task Description
Sometimes the popup widget that lets the user choose the alignment point for positioning the rectangle does not close when the user clicks the desired point.
|
|
20 | QCAD (main) | Bug Report | Medium | Changing drawing unit makes QCAD hangs | Closed | |
|
Task Description
Changing the unit of a drawing can make QCAD hangs
Mile: QCAD hangs in endless loop
Nanometer, Microinch: view turns white, at some levels of zoom, it turns gray
Foot, Yard: GraphicsView grid too small meshed
|
|
22 | QCAD (main) | Bug Report | Low | Improve grid info display for imperial units | Closed | |
|
Task Description
For inch, foot, .. the grid info display should for example display “1/128” instead of 0.0078125
|
|
23 | Tests | Bug Report | High | Fix UiTests | Closed | |
|
Task Description
Fix UiTests
|
|
28 | QCAD (main) | Bug Report | Low | Test Recorder | Closed | |
|
Task Description
|
|
31 | QCAD (main) | Bug Report | Medium | Snap Coordinate / option toolbar: uncaught exception | Closed | |
|
Task Description
'setButton'"Set"
problem: the option tool bar isn’t show at all
|
|
32 | ECMAScript | Bug Report | High | REcmaDocument.h: queryIntersectedEntitiesXY() is missin ... | Closed | |
|
Task Description
context:
'doc.queryIntersectedEntitiesXY'
RDocument.h:
QSet<REntity::Id> queryContainedEntities(
const RBox& box
);
QSet<REntity::Id> queryIntersectedEntitiesXY(
const RBox& box,
bool checkBoundingBoxOnly=false,
RBlock::Id blockId = RBlock::INVALID_ID,
const QList<RS::EntityType>& filter = QList<RS::EntityType>()
);
QSet<REntity::Id> queryContainedEntitiesXY(
const RBox& box
);
REcmaDocument.h:
static QScriptValue
queryContainedEntities(QScriptContext* context, QScriptEngine* engine);
static QScriptValue
queryContainedEntitiesXY(QScriptContext* context, QScriptEngine* engine);
static QScriptValue
|
|
33 | QCAD (main) | Bug Report | Low | Prints always to A4 | Closed | |
|
Task Description
Print prints always to A4, regardless of paper size chosen.
|
|
34 | QCAD (main) | Bug Report | Low | Printing tests | Closed | |
|
Task Description
Iterate through all drawings in a directory and create PDFs from them using the same mechanism as for printing.
|
|
36 | QCAD (main) | Bug Report | High | Copy / Paste crashes | Closed | |
|
Task Description
load the attached file
select about 20 lines
Ctrl-c
Ctrl-v
qcad [C/C++ Application]
/home/martin/workspace/rsframework/debug/qcad [27492]
Thread [6] 27499 (Suspended : Container)
Thread [5] 27498 (Suspended : Container)
Thread [3] 27496 (Suspended : Container)
Thread [2] 27495 (Suspended : Container)
Thread [1] 27492 (Suspended : Signal : SIGABRT:Aborted)
__kernel_vsyscall() at 0xffffe424
raise() at 0xb4f037ff
abort() at 0xb4f05140
RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8e03412
qt_message_output() at 0xb5357f65
0xb53581ab
qFatal() at 0xb53582c9
qt_assert() at 0xb5358355
RExporter::exportEntity() at RExporter.cpp:514 0x8de759b
RDocumentInterface::previewOperation() at RDocumentInterface.cpp:1,789 0x8ddcc0d
<...more frames...>
gdb
qcad
|
|
39 | QCAD (main) | Bug Report | Low | print of not found (invalid) layer crashes | Closed | |
|
Task Description
"dummy"
Thread [1] 23305 (Suspended : Signal : SIGSEGV:Segmentation fault)
RLayer::getLinetypeId() at 0x898faae
operator<<() at RLayer.cpp:141 0x8df7ce4
REcmaSharedPointerLayer::toString() at REcmaSharedPointerLayer.cpp:1,885 0x8b1ab59
0xb6bd913c
0xb6ac2f68
0xb6ac3058
0xb6b09fb5
0xb69ed8e7
0xb6b083d5
0xb6a5a992
<...more frames...>
|
|
40 | QCAD (main) | Bug Report | Medium | saving spline CP, 2deg, closed hits assert | Closed | |
|
Task Description
new file
draw spline CP, 2deg, closed
save → crash
Debug: "RDwgServices::printErrorStackTrace: General modeling failure"
Warning: RDwgExporter::exportEntity: Exception occured. Entity NOT saved:
RSplineEntity(REntity(RObject(id: 23, document: "0xb246720", address: "0xb915f00", undone: 0), type: 23, layerId: 21, blockId: 22, lineweight: -1, linetypeId: 0, color: RColor(ByLayer) , drawOrder: 0 , selectionStatus: false )
controlPoints (6): 0: RVector(14, 21, 0) 1: RVector(41, 25, 0) 2: RVector(41, 9, 0) 3: RVector(28, 4, 0) 4: RVector(14, 21, 0) 5: RVector(41, 25, 0)
fitPoints (0):
knots (7): 0: -1, 1: 0, 2: 1, 3: 2, 4: 3, 5: 4, 6: 5, )
Fatal: ASSERT: "false" in file RDwgExporter.cpp, line 1234
Thread [1] 2066 (Suspended : Signal : SIGABRT:Aborted)
__kernel_vsyscall() at 0xffffe424
raise() at 0xb4f037ff
abort() at 0xb4f05140
RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8e025a6
qt_message_output() at 0xb5357f65
0xb53581ab
qFatal() at 0xb53582c9
qt_assert() at 0xb5358355
RDwgExporter::exportEntity() at RDwgExporter.cpp:1,234 0x8cb754f
RExporter::exportEntities() at RExporter.cpp:408 0x8de5c96
<...more frames...>
|
|
41 | QCAD (main) | Bug Report | Medium | dimensions: tolerance shown twice after block insert | Closed | |
|
Task Description
File “ExampleDrawings/data/dim_aligned.dwg”:
choose “Generate Example Drawings” → the element “aligned dimension” (with limits set) shows 0.010.01 now, since both label and tolerance limits are set (according to the property editor):
label: <>\S0.01^0.02;
upper limit: 0.01
same for lower limit
“Generate Example Drawings” inserts the drawings as blocks
|
|
42 | QCAD (main) | Bug Report | Low | Text Dialog: bold / italic main font | Closed | |
|
Task Description
bold / italic check box for main font has no effect
|
|
43 | QCAD (main) | Bug Report | Medium | Hatch ellipse | Closed | |
|
Task Description
cannot hatch single full ellipse
|
|
44 | QCAD (main) | Bug Report | High | Save might not save in last chosen format | Closed | |
|
Task Description
File - Save might not save in last chosen format but default format. E.g. if a file is saved as DXF R12, and then saved, check if the format is still DXF R12 and not the default DXF format (2010).
|
|
45 | QCAD (main) | Bug Report | Medium | Hatch Polyline | Closed | |
|
Task Description
open the attached drawing
select the polyline
fill it with hatch pattern “stars” → looks ok, the whole area is filled
save the file
re-open it
there is a gap in the filling now, see attached screen shot
|
|
46 | QCAD (main) | Bug Report | High | Saving solid filled hatch hits assert | Closed | |
|
Task Description
Debug: RDwgExporter::exportHatchEntity: RHatchEntity(REntity(RObject(id: 27, document: "0xbad0940", address: "0xffffffffaba45558", undone: 0), type: 20, layerId: 21, blockId: 22, lineweight: -1, linetypeId: 0, color: RColor(ByLayer) , drawOrder: 3 , selectionStatus: false ) , solid: true, scale: 2, angle: 0, pattern: "SOLID",
boundary:
loop 0:
RLine(RShape(address: "0xffffffffaba42b48"), startPoint: RVector(8, 25, 0) , endPoint: RVector(35, 25, 0) )
RLine(RShape(address: "0xffffffffaba42d88"), startPoint: RVector(35, 25, 0) , endPoint: RVector(35, 9, 0) )
RLine(RShape(address: "0xffffffffaba42c08"), startPoint: RVector(35, 9, 0) , endPoint: RVector(8, 9, 0) )
RLine(RShape(address: "0xffffffffaba43150"), startPoint: RVector(8, 9, 0) , endPoint: RVector(8, 25, 0) )
)
Debug: "RDwgServices::printErrorStackTrace: Not applicable"
Warning: RDwgExporter::exportEntity: Exception occured. Entity NOT saved:
RHatchEntity(REntity(RObject(id: 27, document: "0xbad0940", address: "0xffffffffaba45558", undone: 0), type: 20, layerId: 21, blockId: 22, lineweight: -1, linetypeId: 0, color: RColor(ByLayer) , drawOrder: 3 , selectionStatus: false ) , solid: true, scale: 2, angle: 0, pattern: "SOLID",
boundary:
loop 0:
RLine(RShape(address: "0xffffffffaba42b48"), startPoint: RVector(8, 25, 0) , endPoint: RVector(35, 25, 0) )
RLine(RShape(address: "0xffffffffaba42d88"), startPoint: RVector(35, 25, 0) , endPoint: RVector(35, 9, 0) )
RLine(RShape(address: "0xffffffffaba42c08"), startPoint: RVector(35, 9, 0) , endPoint: RVector(8, 9, 0) )
RLine(RShape(address: "0xffffffffaba43150"), startPoint: RVector(8, 9, 0) , endPoint: RVector(8, 25, 0) )
)
Fatal: ASSERT: "false" in file RDwgExporter.cpp, line 1234
Thread [1] 23860 (Suspended : Signal : SIGABRT:Aborted)
__kernel_vsyscall() at 0xffffe424
raise() at 0xb4f037ff
abort() at 0xb4f05140
RMainWindow::messageHandler() at RMainWindow.cpp:63 0x8e06a4a
qt_message_output() at 0xb5357f65
0xb53581ab
qFatal() at 0xb53582c9
qt_assert() at 0xb5358355
RDwgExporter::exportEntity() at RDwgExporter.cpp:1,234 0x8cbb4cf
RExporter::exportEntities() at RExporter.cpp:408 0x8de9f8e
<...more frames...>
|
|
47 | QCAD (main) | Bug Report | Low | Print preview marks drawing as modified | Closed | |
|
Task Description
Print preview marks drawing as modified
|
|
48 | QCAD (main) | Bug Report | Low | Close drawing from print preview | Closed | |
|
Task Description
Fails if drawing was modified and user wishes to save drawing.
|
|
49 | QCAD (main) | Bug Report | High | Import QCAD 2 drawings | Closed | |
|
Task Description
Load QCAD 2 drawings, including:
print preview settings, drawing scale, etc.
hatch patterns
fix name
fix scale
fix angle
dimension labels (tolerances)
|
|
50 | QCAD (main) | Bug Report | Low | Text dialog: Uncaught exception | Closed | |
|
Task Description
open text dialog
select some characters (for coloring)
click on the “color” button → a pop up windows appears showing all colors
don’t choose a color, but click somewhere outside the pop up window
'chosenAction'"color" |
|
51 | QCAD (main) | Bug Report | Low | Text Dialog: remember last used settings | Closed | |
|
Task Description
Remember last used settings (text size, font, ...)
|
|
52 | QCAD (main) | Bug Report | Low | Property Editor: combo boxes | Closed | |
|
Task Description
Text entities show a field “Font Name” in the property editor. This should offer a font combo box to change the font.
Hatch entities show a field “Pattern/Name” which should offer a combo box with pattern names.
|
|
53 | QCAD (main) | Bug Report | Low | Text issues | Closed | |
|
Task Description
Done
Text with ‘standard’ font
|
|
54 | QCAD (main) | Bug Report | Low | Creating polyline from segments hangs | Closed | |
|
Task Description
load “scripts/Draw/Polyline/PolylineFromSegments/Tests/lines.dxf”
choose Polyline → Create from segments
the conversion isn’t done
the tool can be cancel with right click, but QCAD stays in strange stage using 25% CPU permanently
quit leads to segmentation fault
Thread [1] 20083 (Suspended : Signal : SIGSEGV:Segmentation fault)
0xb693148a
QScriptEngineAgentPrivate::atStatement() at 0xb6bc397b
0xb6a42232
0xb6a8e39a
0xa9b50ac0
0xffffffff
0x5
0xfffffffe
0xdc
0xfffffffe
<...more frames...>
|
|
56 | QCAD (main) | Bug Report | Low | Courier font collision | Closed | |
|
Task Description
Rename Courier.cxf font, correct courier in imported QCAD 2 files
|
|
57 | QCAD (main) | Bug Report | Low | Plugin.xslt.parseStylesheet crashes (OpenSUSE 11.4) | Closed | |
|
Task Description
openSUSE 11.4 (i586) Linux vostro 2.6.37.6-0.5-desktop #1 SMP PREEMPT 2011-04-25 21:48:33 +0200 i686 i686 i386 GNU/Linux
Thread [1] 6487 (Suspended : Signal : SIGSEGV:Segmentation fault)
strncmp() at 0xb4f4789a
__xmlParserInputBufferCreateFilename() at xmlIO.c:2,525 0x9116d31
xmlParserInputBufferCreateFilename() at xmlIO.c:2,559 0x9116dc2
xmlNewInputFromFile() at parserInternals.c:1,549 0x90d9c0f
xmlDefaultExternalEntityLoader() at xmlIO.c:3,881 0x9118b75
xmlLoadExternalEntity() at xmlIO.c:3,941 0x9118c6e
xsltDocDefaultLoaderFunc() at documents.c:85 0x907f651
xsltParseStylesheetFile() at xslt.c:6,726 0x907931b
RXslt::parseStylesheet() at RXslt.cpp:14 0x906725f
REcmaXslt::parseStylesheet() at REcmaXslt.cpp:190 0x8c8a0e2
<...more frames...>
|
|
58 | QCAD (main) | Bug Report | Low | SVG Export file name suggestion | Closed | |
|
Task Description
Quick SVG Export suggests file name “Untitled 1 [*].svg”
Remove [*] (comes from window title).
|
|
59 | QCAD (main) | Bug Report | Low | nested block inserts | Closed | |
|
Task Description
...display nothing (see auto generated example drawings)
|
|
60 | QCAD (main) | Bug Report | Low | double free detection after exit (Ubuntu) | Closed | |
|
Task Description
Debug: autostart.js: main(): end.
*** glibc detected *** release/qcad: double free or corruption (out): 0x0b18d7d0 ***
======= Backtrace: =========
/lib/libc.so.6(+0x6c501)[0x2dc5501]
/lib/libc.so.6(+0x6dd70)[0x2dc6d70]
/lib/libc.so.6(cfree+0x6d)[0x2dc9e5d]
/usr/lib/libfontconfig.so.1(+0x19d63)[0x55fd63]
/usr/lib/libfontconfig.so.1(FcPatternDestroy+0x6d)[0x56002d]
/home/martin/opt/qcad_3_0_tp1/release/libQtGui.so.4(_ZN18QFontEngineMultiFTD0Ev+0x62)[0x23da702]
/home/martin/opt/qcad_3_0_tp1/release/libQtGui.so.4(+0x3cab2c)[0x22f7b2c]
/home/martin/opt/qcad_3_0_tp1/release/libQtGui.so.4(+0x3cad9a)[0x22f7d9a]
/home/martin/opt/qcad_3_0_tp1/release/libQtGui.so.4(+0x3cd8a5)[0x22fa8a5]
/home/martin/opt/qcad_3_0_tp1/release/libQtCore.so.4(_ZN18QThreadStorageData3setEPv+0xb1)[0x2af72e1]
/home/martin/opt/qcad_3_0_tp1/release/libQtGui.so.4(+0x3c6988)[0x22f3988]
/home/martin/opt/qcad_3_0_tp1/release/libQtGui.so.4(_ZN5QFont7cleanupEv+0x17)[0x23d4247]
/home/martin/opt/qcad_3_0_tp1/release/libQtGui.so.4(+0x1ecda6)[0x2119da6]
/home/martin/opt/qcad_3_0_tp1/release/libQtGui.so.4(_ZN12QApplicationD2Ev+0x478)[0x2099538]
release/qcad(_ZN19QtSingleApplicationD1Ev+0x1a)[0x875d26c]
release/qcad(main+0x596)[0x875cbca]
/lib/libc.so.6(__libc_start_main+0xe7)[0x2d6fce7]
release/qcad[0x875c5a1]
======= Memory map: ========
00110000-003b1000 r-xp 00000000 08:01 152383 /home/martin/opt/qcad_3_0_tp1/release/libQtScript.so.4.7.3
003b1000-003bc000 rw-p 002a0000 08:01 152383 /home/martin/opt/qcad_3_0_tp1/release/libQtScript.so.4.7.3
003bc000-003cc000 rw-p 00000000 00:00 0
003cc000-003e1000 r-xp 00000000 08:01 134689 /lib/libpthread-2.12.1.so
003e1000-003e2000 ---p 00015000 08:01 134689 /lib/libpthread-2.12.1.so
003e2000-003e3000 r--p 00015000 08:01 134689 /lib/libpthread-2.12.1.so
003e3000-003e4000 rw-p 00016000 08:01 134689 /lib/libpthread-2.12.1.so
003e4000-003e6000 rw-p 00000000 00:00 0
003e6000-0040a000 r-xp 00000000 08:01 131677 /lib/libm-2.12.1.so
0040a000-0040b000 r--p 00023000 08:01 131677 /lib/libm-2.12.1.so
0040b000-0040c000 rw-p 00024000 08:01 131677 /lib/libm-2.12.1.so
0040c000-00426000 r-xp 00000000 08:01 131308 /lib/libgcc_s.so.1
00426000-00427000 r--p 00019000 08:01 131308 /lib/libgcc_s.so.1
00427000-00428000 rw-p 0001a000 08:01 131308 /lib/libgcc_s.so.1
00428000-0042a000 r-xp 00000000 08:01 131676 /lib/libdl-2.12.1.so
0042a000-0042b000 r--p 00001000 08:01 131676 /lib/libdl-2.12.1.so
0042b000-0042c000 rw-p 00002000 08:01 131676 /lib/libdl-2.12.1.so
0042c000-00434000 r-xp 00000000 08:01 658308 /usr/lib/libXrender.so.1.3.0
00434000-00435000 r--p 00007000 08:01 658308 /usr/lib/libXrender.so.1.3.0
00435000-00436000 rw-p 00008000 08:01 658308 /usr/lib/libXrender.so.1.3.0
00437000-0052a000 r-xp 00000000 08:01 149112 /home/martin/opt/qcad_3_0_tp1/release/libQtOpenGL.so.4.7.3
0052a000-00531000 rw-p 000f2000 08:01 149112 /home/martin/opt/qcad_3_0_tp1/release/libQtOpenGL.so.4.7.3
00531000-00544000 r-xp 00000000 08:01 131423 /lib/libz.so.1.2.3.4
00544000-00545000 r--p 00012000 08:01 131423 /lib/libz.so.1.2.3.4
00545000-00546000 rw-p 00013000 08:01 131423 /lib/libz.so.1.2.3.4
00546000-00574000 r-xp 00000000 08:01 658548 /usr/lib/libfontconfig.so.1.4.4
00574000-00575000 r--p 0002d000 08:01 658548 /usr/lib/libfontconfig.so.1.4.4
00575000-00576000 rw-p 0002e000 08:01 658548 /usr/lib/libfontconfig.so.1.4.4
00576000-00579000 r-xp 00000000 08:01 656212 /usr/lib/libgthread-2.0.so.0.2600.1
00579000-0057a000 r--p 00003000 08:01 656212 /usr/lib/libgthread-2.0.so.0.2600.1
0057a000-0057b000 rw-p 00004000 08:01 656212 /usr/lib/libgthread-2.0.so.0.2600.1
0057b000-0057d000 r-xp 00000000 08:01 658282 /usr/lib/libXdamage.so.1.1.0
0057d000-0057e000 r--p 00001000 08:01 658282 /usr/lib/libXdamage.so.1.1.0
0057e000-0057f000 rw-p 00002000 08:01 658282 /usr/lib/libXdamage.so.1.1.0
00582000-005db000 r-xp 00000000 08:01 149090 /home/martin/opt/qcad_3_0_tp1/release/libQtSvg.so.4.7.3
005db000-005dd000 rw-p 00059000 08:01 149090 /home/martin/opt/qcad_3_0_tp1/release/libQtSvg.so.4.7.3
005dd000-005eb000 r-xp 00000000 08:01 658286 /usr/lib/libXext.so.6.4.0
005eb000-005ec000 r--p 0000d000 08:01 658286 /usr/lib/libXext.so.6.4.0
005ec000-005ed000 rw-p 0000e000 08:01 658286 /usr/lib/libXext.so.6.4.0
005ed000-005ef000 r-xp 00000000 08:01 658273 /usr/lib/libXau.so.6.0.0
005ef000-005f0000 r--p 00001000 08:01 658273 /usr/lib/libXau.so.6.0.0
005f0000-005f1000 rw-p 00002000 08:01 658273 /usr/lib/libXau.so.6.0.0
005f1000-0073b000 r-xp 00000000 08:01 149100 /home/martin/opt/qcad_3_0_tp1/release/libQtNetwork.so.4.7.3
0073b000-0073f000 rw-p 0014a000 08:01 149100 /home/martin/opt/qcad_3_0_tp1/release/libQtNetwork.so.4.7.3
0073f000-00746000 r-xp 00000000 08:01 135002 /lib/librt-2.12.1.so
00746000-00747000 r--p 00006000 08:01 135002 /lib/librt-2.12.1.so
00747000-00748000 rw-p 00007000 08:01 135002 /lib/librt-2.12.1.so
00748000-0076b000 r-xp 00000000 08:01 131378 /lib/libpng12.so.0.44.0
0076b000-0076c000 r--p 00022000 08:01 131378 /lib/libpng12.so.0.44.0
0076c000-0076d000 rw-p 00023000 08:01 131378 /lib/libpng12.so.0.44.0
0076d000-00774000 r-xp 00000000 08:01 658265 /usr/lib/libSM.so.6.0.1
00774000-00775000 r--p 00006000 08:01 658265 /usr/lib/libSM.so.6.0.1
00775000-00776000 rw-p 00007000 08:01 658265 /usr/lib/libSM.so.6.0.1
00776000-0078b000 r-xp 00000000 08:01 658244 /usr/lib/libICE.so.6.3.0
0078b000-0078c000 r--p 00014000 08:01 658244 /usr/lib/libICE.so.6.3.0
0078c000-0078d000 rw-p 00015000 08:01 658244 /usr/lib/libICE.so.6.3.0
0078d000-0078f000 rw-p 00000000 00:00 0
0078f000-00791000 r-xp 00000000 08:01 666313 /usr/lib/gconv/UTF-16.so
00791000-00792000 r--p 00001000 08:01 666313 /usr/lib/gconv/UTF-16.so
00792000-00793000 rw-p 00002000 08:01 666313 /usr/lib/gconv/UTF-16.so
00793000-00852000 r-xp 00000000 08:01 152327 /home/martin/opt/qcad_3_0_tp1/release/libQtScriptTools.so.4.7.3
00852000-00857000 rw-p 000bf000 08:01 152327 /home/martin/opt/qcad_3_0_tp1/release/libQtScriptTools.so.4.7.3
00857000-008b2000 r-xp 00000000 08:01 149107 /home/martin/opt/qcad_3_0_tp1/release/libphonon.so.4.4.0
008b2000-008b4000 rw-p 0005b000 08:01 149107 /home/martin/opt/qcad_3_0_tp1/release/libphonon.so.4.4.0
008b4000-008b8000 r-xp 00000000 08:01 658288 /usr/lib/libXfixes.so.3.1.0
008b8000-008b9000 r--p 00003000 08:01 658288 /usr/lib/libXfixes.so.3.1.0
008b9000-008ba000 rw-p 00004000 08:01 658288 /usr/lib/libXfixes.so.3.1.0
008bb000-008bc000 r-xp 00000000 00:00 0 [vdso]
008bc000-00929000 r-xp 00000000 08:01 658235 /usr/lib/libGLU.so.1.3.070900
00929000-0092a000 ---p 0006d000 08:01 658235 /usr/lib/libGLU.so.1.3.070900
0092a000-0092b000 r--p 0006d000 08:01 658235 /usr/lib/libGLU.so.1.3.070900
0092b000-0092c000 rw-p 0006e000 08:01 658235 /usr/lib/libGLU.so.1.3.070900
0092c000-0099e000 r-xp 00000000 08:01 655834 /usr/lib/libfreetype.so.6.6.0
0099e000-009a2000 r--p 00071000 08:01 655834 /usr/lib/libfreetype.so.6.6.0
009a2000-009a3000 rw-p 00075000 08:01 655834 /usr/lib/libfreetype.so.6.6.0
009a3000-009a7000 r-xp 00000000 08:01 658324 /usr/lib/libXxf86vm.so.1.0.0
009a7000-009a8000 r--p 00003000 08:01 658324 /usr/lib/libXxf86vm.so.1.0.0
009a8000-009a9000 rw-p 00004000 08:01 658324 /usr/lib/libXxf86vm.so.1.0.0
009aa000-009f0000 r-xp 00000000 08:01 662734 /usr/lib/mesa/libGL.so.1.2
009f0000-009f1000 ---p 00046000 08:01 662734 /usr/lib/mesa/libGL.so.1.2
009f1000-009f6000 r--p 00046000 08:01 662734 /usr/lib/mesa/libGL.so.1.2
009f6000-009fb000 rwxp 0004b000 08:01 662734 /usr/lib/mesa/libGL.so.1.2
009fb000-009fd000 rwxp 00000000 00:00 0
009fd000-00adc000 r-xp 00000000 08:01 659125 /usr/lib/libstdc++.so.6.0.14./qcad: line 2: 1970 Aborted release/qcad
|
|
61 | Documentation | Bug Report | Medium | QCAD 3 Manual | Closed | |
|
Task Description
Change the user manual directory / file names from ‘simpletextviewer’ to ‘qcad_user_manual’ and adjust the sources accordingly that the manual can be shown in the help menu.
We can simply drop the contents of the manual that is checked in and replace it with a simple note “No manual is available yet for this technology preview of QCAD 3”
|
|
63 | QCAD (main) | Bug Report | Very Low | Property Editor is floated after first start | Closed | |
|
Task Description
OpenSUSE / Ubuntu / Kubuntu: After the first start, the property editor window is (unless the layer list) floated.
|
|
65 | QCAD (main) | Bug Report | Low | Save as hotkey | Closed | |
|
Task Description
File - Save As has no hotkey under Linux (should be Ctrl-Shift-S)
|
|
66 | QCAD (main) | Bug Report | Low | Warnings to fix | Closed | |
|
Task Description
Fix warning on start: Warning: RGuiAction::getByScriptFile: no action found: “scripts/Snap/Coordinate/Coordinate.js”
|
|
67 | QCAD (main) | Bug Report | Low | Linux: New file is saved in wrong format | Closed | |
|
Task Description
Affected OS: OpenSUSE, Ubuntu
File → New
File → Save As, name: “simple” (without extension, file type is DWG by default) → file is save as DXF instead of DWG
behavior under Mac OS X seems to be correct (file dialog adds extension based on chosen filter)
|
|
68 | QCAD (main) | Bug Report | Medium | insert from library browser crashes | Closed | |
|
Task Description
new file
insert (drag-n-drop or insert button) from library browser → segfault
Thread [1] 12403 (Suspended : Signal : SIGSEGV:Segmentation fault)
RObject::getId() at RObject.h:92 0x8a11c82
RClipboardOperation::copy() at RClipboardOperation.cpp:66 0x8d4892a
RPasteOperation::apply() at RPasteOperation.cpp:30 0x8d4841a
RDocumentInterface::previewOperation() at RDocumentInterface.cpp:1,766 0x8de19bb
REcmaDocumentInterface::previewOperation() at REcmaDocumentInterface.cpp:4,711 0x889aaad
0xb6bd813c
0xb6ac1f68
0xb6a9164c
0xa83ced9f
0xb6a423e3
<...more frames...>
|
|
70 | QCAD (main) | Bug Report | Low | 64bit | Closed | |
|
Task Description
ECMAScript engine (garbage collector) crashes on Mac OS X and Linux 64bit if QCAD binary is compiled as a 64bit binary.
|
|
71 | QCAD (main) | Bug Report | High | Save fails with uncaught exception | Closed | |
|
Task Description
New File
Save, enter name without extension
Uncaught exception at /home/martin/workspace/rsframework/scripts/File/SaveAs/../Save/Save.js:40: TypeError: Result of expression 'di.getCorrectedFileName' [undefined] is not a function.
40 fileName = di.getCorrectedFileName(fileName, fileVersion);
|
|
72 | QCAD (main) | Bug Report | Low | Print Preview, MDI: settings not saved | Closed | |
|
Task Description
Print preview settings are not saved if one change the drawing without closing the preview
create 2 new drawings
switch both to print preview
set the scale in the actual drawing to 1:5
switch to the other drawing
switch back
the scale is still 1:1
|