QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
516QCAD (main)Feature RequestLowTo add option to 'print only' selected area.Assigned
0%
2 Task Description

To add the option to ‘print only’ selected area in a drawing.

467QCAD (main)Feature RequestLowFeature request for new Arc tool option to add to Arc s...Assigned
0%
2 Task Description

For and behalf of mandrena

To add another Arc tool option in Arc tools set:

1.Specify Start point for Arc.
2.Specify End point for Arc.
3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!

116QCAD (main)Feature RequestLowShow polyline area in property editorAssigned
30%
2 Task Description

Show area of closed polyline, hatch, solid fill in property editor.

1731QCAD (main)Feature RequestLowOption to palce text to other sideAssigned
0%
1 Task Description

Hi Andrew,

It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(

Many thanks

C;live

1722QCAD (main)Feature RequestLowOption to insert viewport at either of the rectangle co...Assigned
0%
1 Task Description

Hi Andrew,

Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.

Hope that makes sense.

Many thanks

Clive

1714QCAD (main)Feature RequestLowDimension > Diametric: improve display when label is mo...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

1674QCAD (main)Feature RequestLowLayouts and Viewports: duplicate layout blockAssigned
0%
1 Task Description

Duplicate layout blocks

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1673QCAD (main)Feature RequestLowLayouts and Viewports: support polygonal viewportsAssigned
0%
1 Task Description

Add support for polygonal viewports

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1663QCAD (main)Feature RequestLowFeature Request: Export Layers as New DrawingAssigned
0%
1 Task Description

Hi!

in many tasks in qcad I ended up exporting one or several layers into individual files for some cnc jobs or further processing. So the steps I usually do are:

  • select all elements on the layer
  • paste into new drawing
  • sometimes rename layer names or attributes
  • adjust dimension settings
  • save and give name for drawing

Sometimes I have up to 100 layers I need to export like this, so an automatic export for all would be time saving too. But very often a “single click” export method would also help a lot. (e.g. inside the layer list an entry in the right click menue like “save as new file”). Also a multiple selection would be handy if more that one layer should end up in the new file. (e.g. select the three layers that need to be in the new document, then right click and save as new file). Maybe this is too much of changes needed inside the layer list - so something like a separate layer export dialogue would make sense.

When exporting many layers some variables for automatic naming of layers and filename would make sense e.g. user can specify basename_%L.dxf to get the basename_layername.dxf or just an increasing number.

For layers and attributes it is often needed to give a layer a certain name or color for different cnc processes (e.g. engraving and cutting for lasers) or to put everything on layer “0” because of some old CAM software that only supports content on layer 0.

probably many more details would make sense that I didn’t think of yet...

kind regards
Martin


1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1613QCAD (main)Feature RequestLowAdd Orthogonal Option to Angelur DIM Tool ...Assigned
0%
1 Task Description

... please see below:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

1577QCAD (main)Feature RequestLowPostfix for DIM / Remember last DIM Label ...Assigned
0%
1 Task Description

Hi,

unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.

May I ask for an additional Postfix option or/and a remember functionality of those fields?

1576QCAD (main)Feature RequestLowadd option to switch off dialog for modify: rotate tool...Assigned
0%
1 Task Description

To improve the flow of drawing I’d like to switch off the dialog for the rotate tool. Most of the times i use the interactive input and delete the original. So I don’t need to click a popup to acknowledge that.
I allready use the same option for the move/copy tool.

1570QCAD (main)Feature RequestLowmake the stretch tool more flexible in selecting nodesAssigned
0%
1 Task Description

Stretching multiple points of an entity is not possible to my knowledge. I
can use the stretch tool but this gives me a rectangular selection box and
this limits my posibilities. For example when entities are over eachother.
I hope that in the future this will become more like blender. With a freedraw
selection tool and/or shift clicking multiple nodes.

1567QCAD (main)Feature RequestLowAdd support for separate windowAssigned
0%
1 Task Description

Hi, for multi-screen hosts it would be very useful to have additional windows while running the single QCad instance. Other applications like Palemoon, Evolution, Gimp are providing that already.
That would help a lot when working on multiple files and copying blocks between.

1555QCAD (main)Feature RequestLowExport list of points.Assigned
0%
1 Task Description

Hello
It would be great when you can add a function to export a selected object as a list of points.
Is it possible to add?

Autodes DWG TrueView 2017 has this function and it is very useful.
Here you can see a screenshot of this function.

1502QCAD (main)Feature RequestLowInfo tool / Setting for Font and Size ... Assigned
0%
1 Task Description

It would be nice if the Info Tool / Add Measurement to drawing option would use the same settings like the “Dimension settings” for Font and Text height. It’s a kind of similar function in a drawing and should have the same style. Maybe with an on/off switch?

1489QCAD (main)Feature RequestLowEdit > Drawing Preferences > Dimensions: Add option to ...Assigned
0%
1 Task Description

It would be extreamly useful to have an option to either use - or not use leader lines in the standard horizontal/vertical dimension line tools, some of the drawings I’m working on need the ‘standard’ looking dimensions with leader lines and some don’t. its a real pain to have to select - explode and delete all the leaders I don’t need.

Hoping for an option

Regards

Clive

1471QCAD (main)Feature RequestLowFile > Open file locationAssigned
0%
1 Task Description

When working with several files is normal also to work in several folders, this can be confusing, expecially in the case where there are different folders with equal file names.
I propose the creation of a “Open file location”. This, probably under the main menu, “File”, when clicked would open the standard
“file explorer” with the folder that contains the current file already selected.
It would be quite similar to the windows 8/10 “Open file location”.

1452QCAD (main)Feature RequestLowColour opacity optionAssigned
0%
1 Task Description

Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?

related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715

1449QCAD (main)Feature RequestLowProperty Editor: show centroid of polylinesAssigned
0%
1 Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4320

1446QCAD (main)Feature RequestLowNew Polygon toolAssigned
0%
1 Task Description

Hi,

if I need to design a bolt circle (circle on circle) and the single bolt diameter and the quantity of circles are given then I can use the QCAD Polygon Tool “Polygon 2 Points of Side” ... but for the Length of the side I have to do a workaround (Line with this length) to determine the desired length.

It would be very convenient to have an additional tool for a Polygon which has the possibility to ask me for the center, corners and the length of the sides.

1394QCAD (main)Feature RequestLowArc length dimensionRequires Testing
90%
1 Task Description

Support arc length dimenions (undocumented DXF entity ‘ARC_DIMENSION’).
Create arc length dimensions with parallel extension lines for angle < 90, orthogonal extension lines otherwise.
Display arc symbol beside or on top of label text.

1373QCAD (main)Feature RequestLowLine From Angle - additional option to select exisitng ...Assigned
0%
1 Task Description

Often I find myself clicking on an existing line to determine the angle from the property editor, then copying and pasting this info into the angle field, it would be so very useful to have an additional option in the ‘Line from Angle’ tool to be able to pick an existing entity which would automatically register and fill in the angle for me,then all I would need to do would enter the length required.

1372QCAD (main)Feature RequestLowDistance Point to Point - option for 'added' distancesAssigned
0%
1 Task Description

It would be useful to have an additional option to be able to count/add up consecutive distances measured with this tool ;)

1337QCAD (main)Feature RequestLowAlternate units for dimensionsAssigned
0%
1 Task Description

Add support for alternate units for dimension style, for example to display units in mm and in.

1312QCAD (main)Feature RequestLowMake dimension label decimal separator configurableAssigned
0%
1 Task Description

Make dimension label decimal separator configurable (DIMDSEP).

1288QCAD (main)Feature RequestLowPrint Preview Scaled RulersAssigned
0%
1 Task Description

Would be nice, if in print preview QCAD rulers would switch to paper dimensions. Chat here http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

After all, print preview is not just the drawing on white, isn’t it? Everything else should stay in drawing units. Just the rulers, maybe a preference?

1287QCAD (main)Feature RequestLowInformation tool shows absolute units in print previewAssigned
0%
1 Task Description

With that new feature the information tool shows the absolute paper units in the print preview mode instead of drawing units.
So you can determine the exact size of an entity in the printout without manual calculating with the drawing units and the scale factor.

See also http://www.qcad.org/rsforum/viewtopic.php?f=89&t=3793

1282QCAD (main)Feature RequestLowChangeable color of the selection bar in layer list. Assigned
0%
1 Task Description

Changeable color of the selection bar in the layer list.
Now the color of the bar is darkblue and the underlaid icons are black and are not readable.

1170QCAD (main)Feature RequestLowMore options for "Paste along entity"Assigned
0%
1 Task Description

The new tool “Paste along entity” is very useful! But I work mostly in mechanical engineering and would like to see more options to determine where it has to start with the first insert item.

Screenshot:

1. That is how it works right now - no chance to get it started on both ends of an line.

2. If I need to have my items also on the ends I have to use additional the normal “Paste” function.

3. If I could tell the “Paste along entity” that there is a start and end “Base” dimension then I’m a big step further. ;-)

I could tell the tool that it has to start at “0” or at “25” and the rest is just regarding the calculation. Correct?

However - you need many times in mechanical engineering etc. a hole pattern which will start at:

0,25,25,25,25,25,25,25,25,0

or

25, 123.5, 123.5, 123.5, 123.5, 123.5, 25

It would be very nice to have this also in combination with the “Paste along entity” tool ;-)

1157QCAD (main)Feature RequestLowDimension settings - arrowhead styleAssigned
0%
1 Task Description

A ‘non -filled’ arrowhead would be good to have also.

1154QCAD (main)Feature RequestVery LowAdd preference for round reference pointsAssigned
0%
1 Task Description

This one is purely cosmetic, instead of square reference points would it be possible to have the choice of either square or round with size?

1128QCAD (main)Feature RequestLowText: automatically wrap text at text box widthAssigned
0%
1 Task Description

Add support for automatic text line wrapping for multiline text entities.

1127QCAD (main)Feature RequestLowLeaders: spline shapedLikely to be implemented
0%
1 Task Description

Add support for spline shaped leaders

1102QCAD (main)Feature RequestLowRay reference pointAssigned
0%
1 Task Description

Using a horizontally/vertically ray means always I have to use a preset Reference point which is 0° for the horizontal Ray and 90° for the vertically Ray. The Reference point Option Box is deactivated.

It would be nice to be able to choose by myself between a Start and End Reference point like the vert./horiz. Line options.

1100QCAD (main)Feature RequestLowAdd drag dimension (snap) along dimension lineAssigned
0%
1 Task Description

In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.

This is very useful when the two lines the needs a dimension are close together, or overlapping with another.

Attached is two images one for autocad and one for Qcad

1099QCAD (main)Feature RequestLowAdd Leader with text and number bubbleAssigned
0%
1 Task Description

Having leader with numbers and text would be awesome to better interact with the drawing and making BOM lists.

Currently it takes too mush time to make the leaders with text and number bubbles.

1092QCAD (main)Feature RequestLowNew tool: draw trace entitiesAssigned
0%
1 Task Description

Add tool to construct new trace entities.
Trace entities can currently only be loaded from DXF/DWG.

1071QCAD (main)Feature RequestVery Low(Bitmap) scaling convenience optionAssigned
0%
1 Task Description

This can be done as is in QCAD today, but a quick convenience UI bit would be much appreciated.

Suppose you are working off a bitmap image (transcribing old scan, or you got your apartment’s floor plan like this, because, uh, what tenant needs DXF). It has dimensions markers and everything, but fat chance it’ll be to actual CAD scale after importing.

So, to bring it to scale, you measure between two tick marks on the scale, compute ratio based on measurement and what’s written on the dimension line, and do a scale operation (you can also have QCAD compute the ratio by using math expression, whatever).

That works fine.

A purely just for convenience function to do that would be much appreciated: pick two points, enter what the actual distance between them is, poof bam, appropriate scaling operation is applied.

As a twist, there could be some other bitmap skewing options, like “the points I’ve selected are on a horizontal/vertical line/at an angle of X degrees, then the bitmap would also be applied this transform.

1051QCAD (main)Feature RequestLowInfo tool, polygonal area, possibility for a postfix la...Assigned
0%
1 Task Description

... would be nice.

If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².

I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ... ;-)

1044QCAD (main)Feature RequestLowRadian measure symbol for Geometry labeling ...Assigned
0%
1 Task Description

We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...

It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.

1023QCAD (main)Feature RequestLowArrange points on a plan according to variation of dist...Assigned
0%
1 Task Description

Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances

1021dwg2pdfFeature RequestLowdwg2pdf: switch to set block to exportAssigned
0%
1 Task Description

Add a command line switch to dwg2pdf to export a given block instead of “*Model_Space”.

986QCAD (main)Feature RequestLowDetect duplicates - only on selected areaAssigned
0%
1 Task Description

It would be useful to have an additional option to only detect duplicates on user defined selection of drawing.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145

962QCAD (main)Feature RequestLowDefault save / open directoriesAssigned
0%
1 Task Description

Add the option to use a fixed path for the save to, open and CAM export directories.

(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)

927QCAD (main)Feature RequestLowFurther options for the 'Add Measurement' toolsAssigned
0%
1 Task Description

Absolutely love the new options for adding the measurements in the current drawing.

I would like to see an additional option for only adding the text and not the lines also, maybe a simple check box would suffice here.

Of course at the moment I am able to use the property editor to select only the lines and move to a new layer and hide!

923QCAD (main)Feature RequestLowDiagramming (Intelligent Orthogonal Connectors)Assigned
0%
1 Task Description

Hi,

With the new block attribute feature available in QCAD 3.3, there’s little to be done in order to make QCAD a good environment for typesetting circuits and other diagrams. In particular, the only killer feature that lasts is support for connectors: orthogonal lines that connecting one endpoint to another creates a connection line; when the concerned entities are moved the connection line is re-arranged. I’d like to know whether commercial support for this feature is available.

908QCAD (main)Feature RequestLowLibrary Browser Block Delete FunctionAssigned
0%
1 Task Description

It would be very helpful if the library browser had a delete function.

I know that this can be very risky for some people, but it is the easiest
way to see clearly what you delete.

Regards
Henry

Showing tasks 51 - 100 of 288 Page 2 of 6 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing