QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress  desc
516QCAD (main)Feature RequestLowTo add option to 'print only' selected area.Assigned
0%
2 Task Description

To add the option to ‘print only’ selected area in a drawing.

2091QCAD (main)Feature RequestLowToggle redrawing of hatches Assigned
0%
2 Task Description

Because modifying hatches have lag issues I’d like to propose a toggle that turns of the redrawing/rendering of the hatch. Especially while modifying the hatch.

The hatches always have a boundary that can be worked with right? So when we move or stretch the hatch we can still see the boundary and its handles to perform all the actions.

This could be a new view mode that turns of the view of the interior/pattern of the hatch but leave the boundary of the hatch.
Or the draft mode can be extended to include simplified hatches while modifying.

Also see the discussion

2471QCAD (main)Feature RequestLowTool request: Arc - 2 Tangents and radius ...Assigned
0%
2 Task Description

... inclusive trim option ;-)

I’m already able to use the Circle tool “2 Tangents and radius” to accomplish this task but it is a lot of break out etc. action needed to clean the shape afterward.

2330QCAD/CAMFeature RequestLowToolpath optimization optional (on/off)Assigned
0%
2 Task Description

Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033

2307QCAD/CAMFeature RequestLowTools to create dogbones or corner overcut Assigned
0%
2 Task Description

The inside corners of profile tool paths have rounded inside corners. This occurs because the rounded outside the bit cannot make it all the way into the corner of the feature. Think of tracing the inside wall of a cardboard box with a can of soup. The can makes direct contact with the box walls, but its
round shape is unable to completely fit into the tight corners— there’s always a gap.

In a dog-bone overcut (see the figure in attachment), the inside profile corner is enlarged into a semicircle, allowing the sharp edges of the mating piece to slide through without interference.

When a dog bone is applied to the inside corners, as shown in the second figure in the attachment, the joints fit together nicely!

The following website explains what should be implemented More elegant CNC dogbones

There are two ways to implement this tool. Either you modify the original design (as implemented in Fusion 360) or you can do it at the moment you define the tool path (Estlcam allows you to do this for example). See the feature Corner overcut, on Estlcam website

1131QCAD (main)Feature RequestLowUse different units for construction and dimensionsAssigned
0%
2 Task Description

E.g. use Millimeters for construction while dimensions are displayed in Meters.

618QCAD (main)Feature RequestLowuser defined lineweightAssigned
0%
2 Task Description

To have the option to set your own ‘user defined’ line weight.

2189QCAD (main)Feature RequestLowVertically and/or diagonally stacked fractions option.Assigned
0%
2 Task Description

The option for vertically and diagonally stacked fractions would be helpful for both the text creation tool and as the output of dimensions.

1811QCAD (main)Feature RequestLowZoom 1:1Assigned
0%
2 Task Description

It would be nice to be able to adjust the zoom factor so that the scale on the screen matches a ruler which I lay on the screen.

Thanks!

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

2282QCAD (main)Feature RequestLowAdd a "Save As" command while editing blocks in placeAssigned
0%
1 Task Description

As a heavy mechanical drawings user, it would help a lot to have an option to exit a block saving as a new name and making it a new entity from that time ahead.

Example: if a have a lot of screws, one of then is behind another peace and need the to have some lines changed to hidden style lines, in the flow of the work is great if I edit that screw in place and when exiting have the option to save as a new block, to don’t mess with other entities of the same block that I don’t want to change. Yes, there is a workaround that is duplicate and rename the block prior to the editing, but a save as seems to work easier.

Thanks Andrew and team!

2107QCAD (main)Feature RequestVery LowAdd a button to the tool bar to allow for a quick backg...Assigned
0%
1 Task Description

I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.

1713QCAD (main)Feature RequestLowAdd attribute value "By Parent" for child layersAssigned
0%
1 Task Description

Add attribute value “By Parent” for color, line weight, line style for child layers.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5407

823QCAD (main)Feature RequestLowAdd Midpoint Handles to Lines and PolylinesAssigned
0%
1 Task Description

The Midpoint Handles should be used to move Polyline Segments and lines. This would add easy to access stretch functionality.
Combined with a shortcut(hold down shift or alt etc.) to fix the movement to be orthogonal to the line this would bring a lot of extra value.
It would also be possible to to have another shortcut to easily insert nodes to Polylines (again hold shift or alt etc.)

1613QCAD (main)Feature RequestLowAdd Orthogonal Option to Angelur DIM Tool ...Assigned
0%
1 Task Description

... please see below:

https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956

1152QCAD (main)Feature RequestLowAdd preference for snap label and snap cursor shape / c...Assigned
0%
1 Task Description

Would it be possible to have options for:

1.Enable or disable Snap label with text.

2.To have a ‘Snap Marker’ with style and colour choice instead of snap label.

* It would be good for users to have the choice.


1156QCAD (main)Feature RequestLowAdd preference to force toolbars to be floatingAssigned
0%
1 Task Description

Would it be possible to have the choice to dock or not dock toolbars - in other words keep them floating, an additional option in the tool settings could be added?

2501QCAD (main)Feature RequestVery LowAdd spelling checker / spell checker for all text boxesAssigned
0%
1 Task Description

Suggestion to add spelling checker / spell checker for all text boxes

2374QCAD/CAMFeature RequestLowAdd Spindle Speed to Toolpath DialogAssigned
0%
1 Task Description

When editing an existing toolpath to update the parameters of the selected tool, we can update the Feed Rate and the Plunge Rate, but I couldn’t find any way to update the Spindle Speed.

Even when using the Edit Tool KE button, we can edit parameters of the tool on concern but none of the modification is applied to the current Toolpath because as I see, tools parameters are copied fron tools definitions to a Toolpath only at creation of this Toolpath, but Toolpath are not updated accordingly.

Could you please add an edit field for Spindle Speed in the CAM Profile Toolpath window?

Many thanks’, and best regards.

1888dwg2bmpFeature RequestLowAdd support to disable hatch rendering on "dwg2bmp"Assigned
0%
1 Task Description

Hi!

A friendly request to add an option to disable hatch rendering on “dwg2bmp” conversions.

Depending on the nature of the conversion and the density of the hatch, this may render unintelligible images (see attachments). The option could look like “-t, -nohatch” to indicate hatches should be hidden before rendering. This could potentially become an option too for “dwg2svg” or “dwg2pdf.”

Amazing product, thank you so much!

2507QCAD/CAMFeature RequestLowAdd Toolpath from LayerAssigned
0%
1 Task Description

I’ve been able to make this work as proof of concept very easily, but many of the functions are inaccessible/difficult to override from post-processors.

Desired functionality:

1) Enable “Add Profile Toolpath” UI elements all the time (remove setRequiresSelection)
2) CAM Profile Toolpath Dialog: Drop-down menu of available Layers. First option “By Selection Only” 3) “By Selection Only” continues to pass EntityIds of selected objects (existing functionality)
4) Choosing an active Layer will use the Layer as source of EntityIds
5) Any changes to Entities on a Layer will result in those new/removed/changed objects being re-generated without having to manually select and update the tool paths. Either do not recover list of EntityIds from the ToolpathBlock, and instead use “live” each time it’s regenerated, or additional functionality to determine if a LayerId is associated with the Toolpath, and then lookup EntityIds.

I assume the persistence of the Layer selection would be available within the Toolpath, so that it will automatically update EntityIds every time a Toolpath is regenerated, without having to select Entities and updating the toolpath manually.

For large projects, being able to force select objects based upon layer dramatically reduces mistakes and speeds up the workflow.

Thanks

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
1 Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

1345QCAD (main)Feature RequestLowAdded option to paste a number of entities with even/eq...Assigned
0%
1 Task Description

Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=31&p=14209&sid=162973e4a12f58c8116299b62673a520#p14209

An additional option would be useful to paste any given entity a set number of times with even/equal gaps in between.

774QCAD (main)Feature RequestLowAdditional Button in the Blocklist menu for "Create Blo...Assigned
0%
1 Task Description

If I work in QCAD only with Toolbars (and not with the “Cad Tools” there is nowhere a Button to find for “Create Block from selection”.
If I have to create a Block based on a selection I have to work with the Menu or have to activate the Cad Tools.

But, if I look at the Blocklist menu there is a function (+) to add an empty Block. It would be nice to have this button working for both situation - empty Block or depending on a selection to “Create Block from selection”.

Or alternative an additional Button ... :-(

Anyway - in my opinion would that make the “Blocklist” complete. :-)

829QCAD (main)Feature RequestLowAdditional options for the Info Tool Area ...Assigned
0%
1 Task Description

The Info Tool Polygonal Area is a helpful tool ... but I like to ask for additional options ;-)

Yes, the polygonal area makes absolute sense but many times you have just to check a square or rectangle area!

It would be nice and time (click) saving if we could use a “Strg Key” to limit the polygonal area to just a rectangle area.
Two mouse clicks for a rectangle area and done ;-)

In addition to that it would be nice to have the possibility to count up or down a couple areas.
E.g. I measure area 1 plus area 2 or area 1 minus area 2 ...
Maybe just with an additional keystroke like + or -

2213QCAD/CAMFeature RequestLowAllow editing Spindle Speed separately for each Toolpat...Assigned
0%
1 Task Description

Hello dear CAM developers!

I need to use the same tool at different spindle speed in a single machining file.
I would deeply appreciate if you could add a Spindle Speed edit field in the CAM Profile Toolpath edit window in order that each Toolpath can have its own Spindle Speed value (same as you did for Feed Rate and Plunge Rate)

FYI, the tool on my concern is a laser who’s power is driven by the Spindle Speed PWM signal.
I need to be able to do both engraving and cutting in a single file.
Alas! this laser tool is defined with a fix and unique number (99).
Therefore I cannot define different laser tools with different speeds.

Many thanks
Best regards.

1472QCAD (main)Feature RequestLowArc fit tool to improve large filesAssigned
0%
1 Task Description

Large files/large entities perform bad in QCad. There are many dxf files that are created with thousand of lines that perform reasonable in other cad’s/cam’s that qcad cannot match.

One very useful tool, that could be added would help to improve qcad performance and at the same time enlarge the dxf quality (by replacing thousand of files by arcs), would be a tool called “arc fit” where, when possible and under a determined possible error margin (user selectable) creates arcs replacing the existing lines.
This would improve the file work in QCad also improves CAM software that would work after QCad, that I think is important for many users.

For example, if it is needed to use qcad to generate toolpaths for letters, after exploding letters, the output is almost impossible to work due to the number of lines that are created. Having arcs instead of lines would greatly improve qcad use.

500QCAD (main)Feature RequestLowAutohide Side PanelAssigned
0%
1 Task Description

it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.

1425QCAD (main)Feature RequestLowAutomatically create hatch entities behind border entit...Assigned
0%
1 Task Description

Automatically set the draw order one lower than the lowest draw order of a border entity when creating a hatch. This should be a user preference, since not everyone might want that behavior.

2416QCAD (main)Feature RequestLowAutomatically set a proper alternating row color for th...Assigned
0%
1 Task Description

Andrew,

When switching from Default to Dark mode the text on alternating rows is hardly visible.
We can customize this color.

It would be easier if a proper default color is set on switching to and back.

Perhaps the user preferences can be remembered.
Perhaps only when the contrast would be affected.

Regards,
CVH

1169QCAD (main)Feature RequestLowBitmap clippingAssigned
0%
1 Task Description

Clipping bitmaps to only show a part of the image.

See:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3263

1940QCAD/CAMFeature RequestLowCAM > CAM Configuration: Add program descriptionAssigned
0%
1 Task Description

Add a program description to the CAM configuration dialog and export to postprocessors as variable.

See also:
https://www.qcad.org/rsforum/posting.php?mode=quote&f=32&p=24649

1810QCAD (main)Feature RequestLowChange icons from black on white to white on black depe...Assigned
0%
1 Task Description

Automatic change of icons in the Library Browser from black on white to white on black or vice versa depending on the background (white or black; light or dark) in QCAD main window.
See also https://www.qcad.org/rsforum/viewtopic.php?f=31&p=21970#p21970

525QCAD (main)Feature RequestLowchange the printed symbol of pointsAssigned
0%
1 Task Description

Hi,

in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature. ;-)

It would be nice if one could change this behaviour / select the symbol of points.

Best regards - Stefan

This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.

1282QCAD (main)Feature RequestLowChangeable color of the selection bar in layer list. Assigned
0%
1 Task Description

Changeable color of the selection bar in the layer list.
Now the color of the bar is darkblue and the underlaid icons are black and are not readable.

609QCAD (main)Feature RequestLowClean up toolAssigned
0%
1 Task Description

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

1452QCAD (main)Feature RequestLowColour opacity optionAssigned
0%
1 Task Description

Not sure how difficult this would be to implement but just wondered if it is possible to have an option in QCAD to change the opacity of a colour ?

related to topic: http://www.qcad.org/rsforum/viewtopic.php?f=83&p=15715&sid=45f0f0679e8257f3cf98f91e4f0c4577#p15715

684QCAD (main)Feature RequestLowConfigurable behavior for using box selection with Shif...Assigned
0%
1 Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180

670QCAD (main)Feature RequestLowConfigurable rendering options for stacked textAssigned
0%
1 Task Description

Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript).
This may also apply to superscripts.

1705QCAD (main)Feature RequestLowConnect certain actions and layersAssigned
0%
1 Task Description

When dimensioning my drawings I always want the dimensions to be on the dimensions layer.
When adding text I want the text to be on the text layer.
When drawing an infinite line it is always a construction line, therefore I want it to be on the construction line layer.
When drawing a line segment it almost always is on my outline layer.

So I propose a new option to bind certain actions to certain layers.
Whenever those actions are selected the layer should automatically be switched.

I can imagine this being implemented in the General→Tool Settings menu, where the short cuts are defined.

1977QCAD (main)Feature RequestLowCorresponding coordinate format Assigned
0%
1 Task Description

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

1833QCAD (main)Feature RequestLowDeep synchronize attributes featureAssigned
0%
1 Task Description

There is the Synchronize attributes feature which works well. But It affects only block references in the active layout(modelspace, block layout). If I want to synchronize attributes of block references in in another blocks, i have to manually go through all blocks and run synchronize attributes feature. That is the reason I would like to modify Synchronize attributes feature to affect all block references in a drawing, or add new Deep synchronize attributes feature.

962QCAD (main)Feature RequestLowDefault save / open directoriesAssigned
0%
1 Task Description

Add the option to use a fixed path for the save to, open and CAM export directories.

(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)

986QCAD (main)Feature RequestLowDetect duplicates - only on selected areaAssigned
0%
1 Task Description

It would be useful to have an additional option to only detect duplicates on user defined selection of drawing.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145

1503QCAD (main)Feature RequestLowDetect duplicates within a given selection -new tool re...Assigned
0%
1 Task Description

It would be so useful to have an option to be able to detect duplicates within a given selection.

2060QCAD (main)Feature RequestLowDialog box for Layer StatusAssigned
0%
1 Task Description

So far, layer status has only been implemented very rudimentarily.
I wish something like a dialog box in which you can choose for each layer status, which layers belong to it and which not.

757QCAD (main)Feature RequestLowDim: Architectural tick and Leader Arrow size independe...Assigned
0%
1 Task Description

Leader Arrow size and the Architectural tick size are controlled by one and the same value.

It would be nice to get the possibility to adjust them independently from each other ...

1714QCAD (main)Feature RequestLowDimension > Diametric: improve display when label is mo...Assigned
0%
1 Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5408

625QCAD (main)Feature RequestLowDistribute block along spline, polyline, ...Assigned
0%
1 Task Description

See:
http://www.youtube.com/watch?v=27bCgg3zLVA

2436QCAD (main)Feature RequestLowDraw > Hatch > Hatch from Segments: mark position of op...Assigned
0%
1 Task Description

Case description: “Hatch from Segments” (HS) detects correctly an open loop but fails then to set the circle marker for an easy visuelle identification.

Same scenario tested with “Hatch from Selection” (HA) ...
... everything works like a charm ;-)

Showing tasks 101 - 150 of 371 Page 3 of 8 - 1 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing