QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  ascSeveritySummaryStatusProgress
991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

1068QCAD (main)Feature RequestVery LowIsometric bitmapAssigned
0%
Task Description

It would be a nice feature to be able to create an isometric projection of a bitmap.

1071QCAD (main)Feature RequestVery Low(Bitmap) scaling convenience optionAssigned
0%
1 Task Description

This can be done as is in QCAD today, but a quick convenience UI bit would be much appreciated.

Suppose you are working off a bitmap image (transcribing old scan, or you got your apartment’s floor plan like this, because, uh, what tenant needs DXF). It has dimensions markers and everything, but fat chance it’ll be to actual CAD scale after importing.

So, to bring it to scale, you measure between two tick marks on the scale, compute ratio based on measurement and what’s written on the dimension line, and do a scale operation (you can also have QCAD compute the ratio by using math expression, whatever).

That works fine.

A purely just for convenience function to do that would be much appreciated: pick two points, enter what the actual distance between them is, poof bam, appropriate scaling operation is applied.

As a twist, there could be some other bitmap skewing options, like “the points I’ve selected are on a horizontal/vertical line/at an angle of X degrees, then the bitmap would also be applied this transform.

1132QCAD (main)Feature RequestVery LowInfo > Polygonal Area: create blockAssigned
0%
Task Description

Optionally create an (anonymous?) block for the polygon and the text.

1154QCAD (main)Feature RequestVery LowAdd preference for round reference pointsAssigned
0%
1 Task Description

This one is purely cosmetic, instead of square reference points would it be possible to have the choice of either square or round with size?

1227QCAD (main)Feature RequestVery LowAutoCAD skinAssigned
0%
Task Description

QCAD has a lot of features and buttons, probably more that the autocad I’ve been using. Therefore the learning curve is too slow. It would be a great boost for the program to have the possibility of having an Autocad skin, and it will attract many new users.

1426QCAD (main)Feature RequestVery LowLoad drawings that were open when closing QCAD on start...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1649QCAD (main)Feature RequestVery LowAdd configuarable format options for saving blocks to l...Assigned
0%
Task Description

Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.

1709QCAD (main)Feature RequestVery LowFeature request: Add extra padding to textbox.Unlikely to be implemented
0%
Task Description

When placing text on a drawing you are offered with the choice of where you want the origin of the textbox to be. That’s very nice. Image 1 shows an example of text with top left origin. It seems there is already some top padding above the text.

Unfortunately there is no option to add extra padding to the other sides so the text is right to the left border of the textbox. To correct this you have to add some parallel construction lines and move the text a bit to the right. Now the text has nice padding. See image 2.

It would be nice to have some padding options when adding/editing text, like in web-design: https://www.w3schools.com/css/css_padding.asp

288QCAD (main)Performance IssueLowopening dwg file takes very long [improved]Assigned
50%
Task Description

Opening a 4 MB dwg file results in no-response for about five minutes. Opening the same file with DraftSight takes less than five seconds.

728QCAD (main)Performance IssueLowSlow loading of drawing with many block insertsAssigned
0%
1 Task Description

Slow loading of drawing with huge number of block inserts (more than 10000).

137QCAD (main)RefactoringLowSVG Export precisionAssigned
0%
Task Description

In files exported with the (even PG) exporter I sometimes see values like these: 334.99999999999994 or 570.0000000000001 and very often 12 digits of precision.

To safe on file size, I suggest, that QCAD rounds values on SVG export to eg. three places. When viewed in an ordinary web browser, that will result in a precision of 1 inch / 96dpi / 1000 = 0.00026mm, not? Ends should still meet.

1056QCAD (main)RefactoringVery LowDead and wrong code in RSPlatform.cppAssigned
0%
Task Description

I am considering pushing the following diff:

--- a/src/core/RSPlatform.cpp
+++ b/src/core/RSPlatform.cpp
@@ -205,25 +205,6 @@ int RS::getCpuCores() {
     cores = sysinfo.dwNumberOfProcessors;
 #elif defined(Q_OS_UNIX)
     cores = sysconf( _SC_NPROCESSORS_ONLN );
-#elif defined (Q_OS_MAC) || defined (Q_OS_BSD4) || [...]
-    nt mib[4];
-    size_t len;
-
-    /* set the mib for hw.ncpu */
-    mib[0] = CTL_HW;
-    mib[1] = HW_AVAILCPU; // alternatively, try HW_NCPU;
-
-    /* get the number of CPUs from the system */
-    sysctl(mib, 2, &cores, &len, NULL, 0);
-
-    if (cores < 1) {
-        mib[1] = HW_NCPU;
-        sysctl( mib, 2, &cores, &len, NULL, 0 );
-    }
-#elif defined(Q_OS_HPUX)
-    cores = mpctl(MPC_GETNUMSPUS, NULL, NULL);
-#elif defined(Q_OS_IRIX)
-    cores = sysconf( _SC_NPROC_ONLN );
 #endif

(truncated list to manage size)

I see that most of this was put in there as a kind of a note-to-self originally, however _SC_NPROCESSORS_ONLN is implemented by every realistically possible targets anyway, so for all practical purposes, this is dead weight.

A couple of questions remain, though:

  • #ifdef Q_OS_WIN32 should probably be Q_OS_WIN, so as to include win64 as well.
  • Assuming the real purpose for this function is to determine how many parts a particular task is to be split into in the future, if and when QCAD gets the need to split expensive tasks among multiple CPUS, “core” probably shouldn’t be static - CPUs are hot-pluggable today, and while one probably doesn’t do that on a laptop, it’s not unfeasible in, say, a VDI environment.

Thoughts?

1323QCAD (main)SuggestionLowImprove command line support in QCADAssigned
0%
Task Description

Hi,

As a typical command line draftsman (still using acad10 for dos, since microsoft doesn’t supoort Win NT anymore),
I noticed a severe lack on command line acces in QCAD.

For example I find the icon and pixel selecting methods within qcad very confusing and rude.

With the normal cad Select command I can select exactly what en how I want it.

I intend not to be rude, but I find my drawing screen littered all over with all kind of very specialist menu’s,
tools and options. Sorry, I just want to make a drawing at the natural intuitive way, as with a pencil.
So I use command line Commands, such as Move, Copy, Change, Select, a.s.o.
For a ‘Command scripting’ user (-batching is a different tool!-),
it seems to me logical these basic commands should be accessable.

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
0%
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

1678QCAD (main)SuggestionLowProperty Editor dialogAssigned
0%
Task Description

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239

1740QCAD (main)SuggestionLowMake unprintable layers also hidden in print previewAssigned
0%
Task Description

Make unprintable layers also hidden in print preview

1324QCAD/CAMSuggestionVery LowConfusing Copy / Move optionAssigned
0%
Task Description

Hi,

Using the Copy and Move command the [ ] Use current layer and attributes’ is confusing.

Perhaps [ ] change copy /moved set to current layers and attributes. is more suitable.

1375QCAD (main)SuggestionVery LowInstall in hidden folderAssigned
0%
Task Description

After each update, I add a dot before the ~user/opt folder (and in the program launcher) created by QCAD to unclutter my file manager’s appearance. Would be easy, I think, to make the installer put the program directly in ~user/.opt, and nobody would miss that folder while browsing through daily used files.

And what about installing the program as root, so all users of a computer could use it without personal installs, and only personal setting files created by users would be kept in ~user/.opt/qcam.

Jean-Claude

1607QCAD (main)SuggestionVery LowIndent 'Spline Segments:' in explode preferencesAssigned
0%
1 Task Description

 FS#1604  was issued because of non-intuitive hierarchy of the preferences for the Explode function.
The task comment recieved explains the funcionallity in details not found elsewhere.

Indentation of the phrase ‘Spline Segments:’ suggest hierarchy.
Graying out the drop down box for the number of spline segments establish hierarchy.

928QCAD (main)TaskLowCXF font editingAssigned
0%
1 Task Description

Port CXF font editor to QCAD 3.
- Load CXF fonts (load glyphs into blocks)
- Save back to CXF format

Showing tasks 351 - 374 of 374 Page 8 of 8<<First - 4 - 5 - 6 - 7 - 8

Available keyboard shortcuts

Tasklist

Task Details

Task Editing