QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummary  descStatusProgress
 1245 QCAD (main)Bug ReportLow Zoom in / zoom out: drawing painted at inconsistent off ...Closed
100%
Task Description

Zooming in or out repeatedly (keeping + or - key pressed or using mouse wheel) shows the drawing at incorrect offsets in between frames with the correct offset.

Original report:

Zoom in and out with the Mouse wheel is working but it is unfortunately jumping in a zickzack course.

 887 QCAD (main)Bug ReportLow Wrong warning window with area selection ... Closed
100%
Task Description

Lower left to upper right selection which includes invisible blocks causes warning window if I try to use the clipboard “copy” or “cut” function:

“Trying to draw on or modify entities on a locked or invisible layer”

... but it works!

Upper right to lower left selection over all doesn’t calls the warning window!

 812 QCAD (main)Bug ReportLow Wrong Alert messages ... Closed
100%
Task Description

3.1 Beta / XP32

Two Points (C2),
Two Points and Angle (A2),
Two Points and Radius (CD),
ONE Mouse-click = Alert message: “The two points are identical”

Tangent two circles (LT2),
Click on first circle = Alert message: “No tangent possible”,
Click on second circle = Alert message: “No tangent possible”

2552QCAD (main)Bug ReportLowWindows shortcut Alt + Underlined Key fails partly in m...Assigned
0%
Task Description

Reason: Same underlined keys are used for different menus

Select and Snap = S,
Dimension and Info = I,
Modify and Misc = M,

 861 QCAD (main)Bug ReportLow Widgets blends to early in ... Closed
100%
Task Description

I don’t know: Bug or Feature request ....

Example: If I move the “Library Browser” with the mouse closer than ~63px to the top corner it will go to blend in.
Undo doesn’t works in this case - so I have to pull it out and re-size the widget.

Usually it should blend in if I’m over the bar or at least I have to be much closer to the corner - or not?

 534 QCAD (main)Feature RequestLow Werkzeug Lengthen erweitern mit minus amount .... Closed
100%
Task Description

Wäre schön wenn das Werkzeug “Lengthen” auch mit Minus Amounts funktionieren würde ....

 2466 WebsiteBug ReportLow Website QCAD documentation/features Closed
100%
Task Description

“Default template to use for new drawings” is a Pro feature. Website state it is also a CC feature.

https://www.qcad.org/en/documentation/features

 1457 WebsiteBug ReportLow Website FAQ Deutsch Closed
100%
Task Description

Beschreibung “Fehlerbehebung” fehlt. Anker verweist auf #Troubleshooting und führt ins Leere.

http://www.qcad.org/de/qcad-documentation/faq

 2142 QCAD (main)Bug ReportLow Viewports: Cannot snap to reference points of circles / ...Closed
100%
Task Description

Reported by CVH

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7868

637QCAD (main)Feature RequestLowViewports / View ListAssigned
0%
Task Description

1. The Scrollbars for each window in the Viewports has the same size like the normal used scrollbars for windows. If you are working on a normal size Monitor it “steals” a lot of “working space”. Is there any possibility to make the scrollbars smaller or just a line to separate the windows so that I have to navigate with Keyboard and mouse?

2. I thing the Viewports and the View List belongs together - is it possible to get a button in the “View List / Tool Bar” to choose a Viewport style instead of “walking” the long way over the “Drawing preferences” Menu?

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=2071

 1661 QCAD (main)Bug ReportLow Viewport rotation issue Closed
100%
Task Description

Case:

1. Launch Add Viewport, adjust setting for scale and rotation, determine Viewport - QCAD will switch to a Layout Block
= scale and rotation works as expected.

2. Launch Add Viewport, determine Viewport - QCAD will switch to a Layout Block,

change scale setting = works as expected on view and frame,

change rotation = works on view BUT NOT ON VIEWPORT FRAME.

 1147 QCAD (main)Bug ReportLow View > Zoom to selection with only vertical / horizonta ...Closed
100%
Task Description

“Zoom to selection” shows no effect on vertical and horizontal lines: Message: “No selection found”.

Recognizable at:
vertical lines, horizontal lines,
Rectangle, Rectangle with size,
Polygon Center Point, Polygon two corner (only in the case that you have vertical/horizontal lines),

Shapes as a polyline - no problem. ;-)

 1979 QCAD (main)Bug ReportLow View > Layer List: icon spacing Closed
100%
Task Description

Snapshot 3.23.04

Spacing for symbols in layer list way to wide compared to previous versions.

Version 3.23.03 - Husky-2019.10.22-02.png
Version 3.23.04 - Husky-2019.10.22-01.png

 1871 QCAD (main)Bug ReportLow View > Block List: Renaming current block does not upda ...Closed
100%
Task Description

Scenario:

launch BE / Edit contents of selected block,
Pencil symbol shows that this block is now in edit mode,
launch Rename Block / rename it, confirm with ok, dialog closes,
renaming doesn’t works, pencil symbol is still on that block,
try to launch rename block again - doesn’t work anymore,
return to main drawing,
if I then select this block it will show the new name in the Property editor but not in the block list,
if I try to open this block within the block list again it doesn’t works,
if I open this block within a double-click in my drawing it will open but the pencil isn’t shown.

705QCAD (main)Bug ReportLowVerwaltung Library Resourcen und Favoriten ....Assigned
0%
Task Description

Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....

Hier meine Gedanken ....

In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.

Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.

Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX ;-) Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.

Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!

OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”:
QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!

Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.

 543 QCAD (main)Bug ReportLow Unit Konvertierung bei Blocks funktioniert nicht ... Closed
100%
Task Description

Wenn ich eine Zeichnung in mm als Grundlage benutze um über die Zwischenablage etwas in eine Inch Zeichnung zu übernehmen wird alles Maßstäblich in Inch konvertiert.
Sehr schön ;-)

Wenn ich aber einen Block der in einer mm Zeichnung erstellt wurde über die Zwischenablage in eine Inch Zeichnung kopiere wird die Kopie als solches in der Zeichnung auch wieder in Inch konvertiert - der Block wird aber abgelegt in 1mm = 1” und kann unbearbeitet nicht weiterverwendet werden.
Nicht schön :-(

Natürlich kann man jetzt fragen: Wer braucht solch einen Blödsinn? Antwort: Amerikaner! In den USA wird blödsinniger weise gemixt ..... :-(

1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
0%
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

 535 QCAD (main)Feature RequestLow Trim Werkzeug auch zum verkürzen von Linien ... Closed
100%
Task Description

Das Trim Werkzeug in QCad ist ideal um Linien zu verlängern in Bezug zu einer anderen Linie.
Wäre schön wenn dies auch umgekehrt funktionieren würde so das ich Linien verkürzen kann in Bezug zu einer anderen (nicht schneidenden) Linie.

 1988 TranslationBug ReportLow Translation: "Automatisches Speichern" wird mit "Autosa ...Closed
100%
Task Description

QCAD Pro, Deutsche Benutzeroberfläche:

Kommando Zeilen Mitteilung:
[13:35:12] Automatisches Speichern in: C:\Users\......xxx.dxf...
[13:35:12] Autosave abgeschlossen.

Englische und Deutsche Benutzeroberfläche:
Die angezeigten 3 Punkte nach dem xxx.dxf sind überflüssig da die Zeile nach dem dxf definitive endet.

 589 QCAD (main)Feature RequestLow Total Length of selected entities komfortabler anzeigen ...Closed
100%
Task Description

Es wäre schön wenn die “Total Length of selected entities” etwas komfortabler angezeigt würde.

Ich arbeite meistens ohne “Command line”.
Benutze ich das “Info Tool” um die Total Length zu erhalten erhalte ich leider keinen Hinweis wo diese angezeigt wird.
Diese wird nur in der “Command line” angezeigt .... :-(

Zwei Lösungen könnte ich mir vorstellen:
1. Anzeige in der Zeichnung am Mauszeiger ...
2. Anzeige im Property Editor, Geometry, Length (dann natürlich Addiert) anstatt *VARIES*.

Die 2. Lösung halte ich persönlich als die elegante Variante da es eine logisch nachvollziehbare Aussage ist. Zudem erspart es einige Mausklicks auf dem Weg zum Infotool um die gewünschte Info zu bekommen.

Bemaßungen sollten, wenn sie nicht aufgelöst sind, ignoriert werden.

2330QCAD/CAMFeature RequestLowToolpath optimization optional (on/off)Assigned
0%
2 Task Description

Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033

 1191 QCAD (main)Bug ReportVery Low Toolbar: Unnecessary or double divider Closed
100%
Task Description

Yes - it is only cosmetic but it is also stealing space in the Toolbar.

Would be nice to have them removed. ;-)

2471QCAD (main)Feature RequestLowTool request: Arc - 2 Tangents and radius ...Assigned
0%
2 Task Description

... inclusive trim option ;-)

I’m already able to use the Circle tool “2 Tangents and radius” to accomplish this task but it is a lot of break out etc. action needed to clean the shape afterward.

 1943 QCAD (main)Bug ReportLow Tool "New from Template" fails Closed
100%
Task Description

QCAD 3.23.0.2
File / New from Template fails in different situation like immediately after launching the tool, sometimes after changing directories in the dialog like from imperial to metric etc..
QCAD tries for ever (wait cursor) or even quits QCAD. It’s not a clear pattern ...

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6585

3.23.0.2 doesn’t works
3.23.0 works

Reported on Ubuntu 19.4, Win10

596QCAD (main)Feature RequestLowTool "Lengthen" mit "Total" erweitern oder ....Assigned
0%
1 Task Description

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel ;-)

 2066 QCAD (main)Bug ReportLow Text/Dim rendering issue for size and contrast Closed
100%
Task Description

Sorry - can’t give you a proper way to reproduce it .... it just happens.

Dimension Arrows shown with reduced contrast, zoom in/out can trigger it but not always,
text hight jumps from “correct” to way to small to a kind of mixed size display,
DIM preview fails often in size - probably depending on zoom factor ...

Snapshot Version: 3.24.3.4
Edit: Issue occurred first with version: 3.24.3.2

 755 QCAD (main)Bug ReportLow Text: Redundant Infos if I customize the Text hight .. ...Closed
100%
Task Description

If I customize the Text height I get redundant Infos for the Contents...

 627 QCAD (main)Bug ReportLow Text: Falsche Info beim editieren der Formatierung ... Closed
100%
Task Description

Grundsätzlich finde ich die Optionsauswahl beim erstellen oder editieren eines Textes im “Text Option Window” als sehr Komfortable.

Trotzdem gibt es hier für mich noch einige Ungereimtheiten die ich als Bug bezeichnen würde da es untypische Informationen liefert und verwirrt.

QCad, English, XP, Text Optionen Window:
Im linken Bereich gibt es den sogenannten “Main Font”. Dieser kann aber nicht unter Application/Drawing preferences vorgegeben werden, richtig? Hier würde ich mir wünschen das ich diesen vorgeben kann und es somit ein “Default Font” wäre. Für Bemaßungen benutze ich z.B. eine Vorgabe von 0.137795276 inch (= Deutsche DIN 3.5mm für Texthöhen) und bin Heilfroh das ich dies als Default vorgeben kann ;)

Im rechten Bereich des Text Options Windows kann ich im “Rich Text” Tab den Text formatieren - grundsätzlich eine schöne Sache.
Leider verwirrt mich dieses Fenster immer wieder:
Fallbeispiel:
Text erstellt, individuell formatiert(Textfonts, Höhe, Farbe), positioniert in der aktuelle Zeichnung.
Doppelklicke ich den Text um ihn zu editieren poppt das Optionsfenster auf und der Text ist markiert. Im Text font wird mir gesagt das es der Text Arial ist mit einer Höhe von 1 und schwarz. Da ich aber NICHT Arial verwendet habe und die Texthöhen unterschiedlich sind und alles in rot ist dies eine falsche Information.
Hier hätte ich erwartet: Font = *VARIES*, Höhe = *VARIES*, Farbe = *VARIES*. Klicke ich dann mit der Maus in den Text (Markierung verschwindet, Cursor blinkt im Text) habe ich immer noch die selbe Info - erst ein zweiter Klick spuckt dann die richtige Info aus.

Zurück zum Main Font: Wie nutze ich diesen wenn ich bereits andere Formatierungen verwendet habe - neu eingeben? Gutes Gedächtnis vorausgesetzt ;-) Spaß bei Seite: Sollte dies nicht eine Vorgabe sein die “auf Knopfdruck” verwendet werden kann?

Und da ich neugierig bin .... wofür ist die Option “Simple Text”?

 1415 QCAD (main)Bug ReportLow Text TE - Only simple text possible Closed
100%
Task Description

Text - Only simple text is possible. Checked or unchecked option “Simple Text” will not change this. Reboot QCAD after changing shows also no effect.

2205QCAD (main)Bug ReportLowText rendering fails in certain zoom levelWaiting on fix in 3rd party library
0%
1 Task Description

Case:
Drawing with text, zoom in and out with one of the common methods, text will disappear in certain zoom level

Same drawing zoomed in and out in 3.20.0.0 doesn’t show this effect - works just fine.

 632 QCAD (main)Feature RequestLow Text Höhe default in Application Preferences / Drawing  ...Closed
100%
Task Description

Es wäre Hilfreich für eine eigene durchgängige Standardisierung die möglichkeit zu haben Default Texthöhen in den Application/ Drawing Preferences vorgeben zu können.

Perfekt wäre in meinen Augen das man drei Texthöhen vorgeben könnte wie z.B. 2.5mm, 3.5mm, 5mm die bei der Eingabe von Text (oder beim editieren) per Schalter gewählt werden könnten. Das individuelle eingeben von Texthöhen sollte aber zudem beibehalten werden.

Bei der Bemaßung kann ich dies bereits jetzt für eine Texthöhe einrichten ... ;-)

864QCAD (main)Bug ReportLowTemplate Preview/Info doesn't shows the sheet orientati...Assigned
0%
1 Task Description

“Create New Drawing from Template” Browser can’t readout the Page orientation ...

 1785 QCAD (main)Bug ReportLow Template / Viewport scale issue Closed
100%
Task Description

Given: Template with prepared Paper Space Frame/Titleblock scale = 1:1.
Drawing 1:1
First Viewport / scale 1:1 / inserted in Paper Space = everything fine,
Second Viewport / scale 0.02 will scale the Paper respective to the new Viewport scale but the Frame/Titleblock isn’t scaled.

 715 QCAD (main)Bug ReportLow Tangent Warning Messages are wrong ... Closed
100%
Task Description

Task:
I like to draw a line tangent between two circle.

I choose the line/tangent tool - click the first circle - get a Warning Message: “No tangent possible” confirm the Message with the OK Button.
Choose the second circle - get again a Warning Message: “No tangent possible” confirm also this Message with the OK Button.

Result: A line tangent between two circle ......

2331QCAD/CAMFeature RequestLowTabs: Control over on which particular profile used.Assigned
0%
Task Description

Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.

It would be nice to have some kind of control on which profile a tab has to be used.

 2460 QCAD/CAMBug ReportLow Tab Lengths incorrect Closed
100%
Task Description

Tab value specification in Option bar: Lengths 2, Thickness 1
G-code Lengths = 8.35 (in my example), Thickness 1

 945 QCAD (main)Feature RequestLow Stretch tool for blocks ... Closed
100%
Task Description

It would be nice if we could use the Stretch tool also on blocks.

There are so many possibility’s to build a really good (time-saving) block-list /library with preassembled parts but if I have always to explode / ruin the block to use the stretch tool doesn’t helps the productivity.

 2152 QCAD (main)Bug ReportLow Status change for Visibility in Viewports fails Closed
100%
Task Description

Status change for Visibility is without any effect on Viewports in Paper_Space.

Case:
Entities drawn on a layer in Model_Space. Visibility on/off works.
Situation covered with a Viewport, placed in Paper_Space, Edit content launched for that Paper_Space, Visibility on/off doesn’t works.

It was properly working in previos QCAD versions ...

 1289 QCAD (main)Bug ReportLow Spline from fit points: load error for non-periodic but ...Closed
100%
Task Description

After saving an open designed Spline QCad will open it the next time as a closed spline.
Trying to fix this in the Property Manager using “Closed Periodic yes/no” leads to an open but broken spline.

Pic 1 = designed
Pic 2 = saved/opened from HD
Pic 3 = Try to fix this with the Property Manager

 1086 DocumentationBug ReportLow Spline corner control responding to multiple mouse clic ...Closed
100%
Task Description

I can’t find any documentation (Reference Manual / Book) about the possibility to change the “corner” transition shape for Spline’s (Control Points) with multiple mouse clicks.
1, 2 or 3 clicks = smooth to sharp corner.

 492 QCAD (main)Bug ReportLow Snap to intersection manual in block references Closed
100%
Task Description

Wenn ich versuche einen Block zu verschieben mit dem Ziel “Intersection manual” wird nicht die im Block ausgewählte Linie benutzt sondern alle im Block befindlichen Linien die eine “Intersection manual” ermöglichen würden.

Auch die visuelle Auswahlerleichterung einer Linie (Farbe ändert sich beim drüberfahren mit der Maus) wird im Block nicht unterstützt :(

 1150 QCAD (main)Bug ReportLow Snap to dimension reference points Closed
100%
Task Description

... except reference points I can’t anymore snap to any line on a Dimension. To make a proper alignment I need to use the Grid or other entities.

1428QCAD (main)Feature RequestLowSnap middle of the minimum distance between two entity'...Assigned
0%
5 Task Description

Hi,

from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.

Pic 1: Given situation
Pic 2: Result after using this new snap tool

Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?

817QCAD (main)Feature RequestLowSnap and cut all intersection in a given area tool ...Assigned
0%
Task Description

As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch.
To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries.
The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....

Clive mentioned on this:
Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.

 542 QCAD (main)Bug ReportLow Snap > Restrict horizontal cannot be applied to Snap >  ...Closed
100%
Task Description

Vorgabe: Kreis der verschoben werden soll auf einen Punkt zwischen zwei Vertikale Linien.

Auswahl des Kreises,
Funktion Verschieben/Kopieren,
Referenzpunkt = Mitte Kreis,
Zielpunkt Middle Manuel,
Erster Punkt = Center 1. vertikale Linie,
Zweiter Punkt restricted Horizontal zum ersten Punkt,
QCad benutzt nun fälschlicher Weise den Referenzpunkt des Kreises anstatt den Center der bereits gewählten 1. vertikalen Linie ....

 1186 QCAD (main)Bug ReportLow Snap > Intersection manual: not working for polyline se ...Closed
100%
Task Description

Snap to “Intersection manual” is only working in dependency on Line/Polyline orientation.

Two Polylines (not each other crossing): doesn’t works.

One Line, one Polyline (not each other crossing) works only in dependency on entity orientation.

 2239 QCAD (main)Bug ReportLow Snap > Coordinate: Confirm coordinate with number block ...Closed
100%
Task Description

Feature request? Bug? I don’t know ... ;-)

NumBlock Enter key is not accepted by “Coordinate” tool to confirm the settings in the option bar (green Arrow icon). Enter key on main keyboard works.

Very confusing when you are used to type in all numbers with the NumBlock (what is very fast) but to confirm you have to use the “far away” Enter on the Main keyboard ... ;-)

 367 QCAD (main)Feature RequestLow Snap "Reference" also for an arc ... Closed
100%
1 Task Description

The Snap “Reference” is perfect working on circles.

I would be nice to have this function also on Arc’s.
There are many necessities to attach a Horizontal or Vertical line on an arc or an “ex circle” (circle after a cut,)rounds etc. in a professional drawing.

 590 QCAD (main)Feature RequestLow Sichtbar/Unsichtbar geschaltete Blöcke/Layer speicherba ...Closed
100%
Task Description

Ich habe versucht die Template Vorlage von Clive (danke dafür!) für meine Bedürfnisse anzupassen.

Clives Template:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=1975

Für meine Templates benötige ich die Symbole der Projektionsmethode 1 UND die Projektionsmethode 3.

Deshalb habe ich jeweils einen Block für die Symbole entworfen welche in dem Template an der selben Stelle platziert sind und entsprechend ein- bzw. ausgeblendet werden sollen. Beim aufrufen des Templates soll natürlich einer der Blöcke bereits sichtbar sein.

Leider kann ich aber einen Unsichtbar geschalteten Block nicht als solches abspeichern was dazu führt das ich beim aufrufen des Templates mehrere Blöcke sichtbar übereinander habe. Layer kann ich als unsichtbar abspeichern.

Ich sehe sehr viele Verwendungen um mit sichtbaren/unsichtbaren Blöcken ein Template vorzubereiten. Da es mit Layern funktioniert denke ich mir sollte es auch mit Blöcken machbar sein.

Oder ist es ein Bug?

 2414 QCAD (main)Bug ReportLow Shortcut YR, YE etc fails when layer is marked. Closed
100%
Task Description

Shortcut YR, YE etc. fails for marked Layer. It works at active layer.

Showing tasks 1 - 50 of 332 Page 1 of 71 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing