|
2081 | QCAD (main) | Bug Report | Low | Dimension label color at existing files will change to ... | Closed | |
|
Task Description
The new QCAD feature “dimension label color” will change the label color at existing drawings to “Custom”. In my opinion it should be by default “by Layer” until the user decide to change the color by him/herself.
|
|
2089 | QCAD (main) | Bug Report | Low | Property Editor: Linetype Scale and Draw Order wrongly ... | Closed | |
|
Task Description
Case:
Drawing unit = inch,
Dimension Label Format set to Engineering or Architectural,
|
|
2093 | QCAD (main) | Bug Report | Low | Datum tool, option bar, missing icon for "Undo Last Seg ... | Closed | |
|
Task Description
no task description |
|
2094 | Translation | Bug Report | Low | Leader and Datum - Tool tip for "Undo Last Segment" | Closed | |
|
Task Description
Tools: Leader and Datum Tool tip for “Undo Last Segment” - Segment instead of Segement
|
|
2102 | QCAD (main) | Bug Report | Low | Angular Dimension - fixed extension line option incompl ... | Closed | |
|
Task Description
The property editor offers for an Angular Dimension the option to make a fixed extension (yes/no) but the input field for a length is missing.
|
|
2123 | QCAD (main) | Bug Report | Low | File > Print: Crop marks not printed | Closed | |
|
Task Description
Crop marks in Paper_Space are only printed if a Viewport covers the crop mark position.
See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7651
|
|
2134 | QCAD (main) | Bug Report | Low | Property Editor, Total Length result incorrect | Closed | |
|
Task Description
Case: Tested with the example drawing provided below: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=7776
If I select every single entity piece by piece with the mouse pointer the total length is correct. If I select everything in once with a rectangular or a polyline selection the total length is incorrect.
|
|
2142 | QCAD (main) | Bug Report | Low | Viewports: Cannot snap to reference points of circles / ... | Closed | |
|
Task Description
Reported by CVH
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7868
|
|
2152 | QCAD (main) | Bug Report | Low | Status change for Visibility in Viewports fails | Closed | |
|
Task Description
Status change for Visibility is without any effect on Viewports in Paper_Space.
Case: Entities drawn on a layer in Model_Space. Visibility on/off works. Situation covered with a Viewport, placed in Paper_Space, Edit content launched for that Paper_Space, Visibility on/off doesn’t works.
It was properly working in previos QCAD versions ...
|
|
2199 | QCAD (main) | Bug Report | Low | Polyline with segment widths: duplicate rendering as bl ... | Closed | |
|
Task Description
Block contains a polyline with customized width
Works flawless with 3.25.0
Reported by claudioarch https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8205
|
|
2214 | QCAD (main) | Bug Report | Low | Rectangle area selection fails because Block reference ... | Closed | |
|
Task Description
A block selection in Model_Space with the rectangle area selection tool fails because the block reference is located at an unexpected location. If I catch by accident the reference point or do a simple mouse click selection it will work.
|
|
2215 | QCAD (main) | Bug Report | Low | Rectangle area selection fails partly at Ordinate dim's | Closed | |
|
Task Description
Rectangle area selection doesn’t work on ALL Ordinate dim’s.
Related to? https://www.qcad.org/bugtracker/index.php?do=details&task_id=2214
|
|
2220 | QCAD (main) | Bug Report | Low | (CU) Convert Drawing Unit (inch, mm etc) to None fails | Closed | |
|
Task Description
(CU) Convert Drawing Unit (inch, mm etc) to none fails with the message “Warning, Unit “None” selected. Nothing to be done”. In the same drawing I can change the Drawing Unit below “Drawing preferences/ Drawing Unit” to None without any problems.
|
|
2232 | QCAD/CAM | Bug Report | Low | Nesting fails when parts fit plus minus null on sheets | Closed | |
|
Task Description
Just lost a detailed report (token?)- now a short version!
Nesting fails when parts fit plus minus null on sheets. My parts should fit regarding to the measurements on a sheet multiple times. The nesting tool can’t find a solution.
Options are: Quantity multiplier: 0 Rotation: 4 Sheet margin: 0 Margin: 0 Tolerance: 0
If I modify the parts and make them slightly smaller then a nesting is done as expected. Did I miss something?
|
|
2239 | QCAD (main) | Bug Report | Low | Snap > Coordinate: Confirm coordinate with number block ... | Closed | |
|
Task Description
Feature request? Bug? I don’t know ...
NumBlock Enter key is not accepted by “Coordinate” tool to confirm the settings in the option bar (green Arrow icon). Enter key on main keyboard works.
Very confusing when you are used to type in all numbers with the NumBlock (what is very fast) but to confirm you have to use the “far away” Enter on the Main keyboard ...
|
|
2253 | QCAD (main) | Bug Report | Low | Print Preview incorrect page size | Closed | |
|
Task Description
In Print Preview the movable display of the printing area (white) is displayed to small which makes a multi page arrangement very difficult. You want not notice the wrong size when you print only one page but 10 pages vertical in a row will show the effect clearly. I checked a metric (mm) and an imperial (inch) unit. The deviation in Imperial is clearer than in Metric.
|
|
2280 | QCAD (main) | Bug Report | Low | Dimension arrows not filled | Closed | |
|
Task Description
Version QCAD 3.26.4.7 / Windows x86_64
Existing drawing:
1. e.g. flange.dxf loads with no fills (solid hatch) for arrows, 2. New dimension are also without arrow fills. 3. This existing drawing has Text above line! Setting Drawing Preferences / Dim to “Horizontal text labels” will alter Text to be Horizontal BUT also open a gap for the text which is a separate setting (Text above dimension Line). Undo doesn’t works on this properly - used multiple times will even change the dim color which wasn’t changed in this operation.
New drawing:
1. Same test scenario - same issue. 2. Dim settings = Horizontal text Labels ticked, Text above dimension Line ticked produces a dim horizontal orientated with a gap instead to put the text above the line
|
|
2322 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: dimension problem | Closed | |
|
Task Description
If I convert to an other unit it will only change the unit name - no dim (Existing or new) is calculated regarding to the new unit.
|
|
2326 | QCAD (main) | Bug Report | Low | Library item - Long distance between cursor and object | Closed | |
|
Task Description
Please see the reported issue below: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=8994&p=35889#p35889
The library items is designed only with hatches. Inserted within the Library Browser will lead to a wildly displaced reference point position. The then in the drawing available block inserted again from the Block List will show the original correct reference.
On the other hand - Library Items designed with common entities like circle, line etc. behave in both cases normal as expected.
|
|
2334 | QCAD (main) | Bug Report | Low | Modify > Break Out Segment: Line Selection Mode fails o ... | Closed | |
|
Task Description
no task description |
|
2364 | QCAD (main) | Bug Report | Low | Block > Edit Block in Place: working set selection not ... | Closed | |
|
Task Description
Case: open “Edit Block in Place”, select entity or block like you would do to “Add to Working Set”, don’t add - instead cancel “Edit Block in Place”, selection color stay on even it is not treated anymore as selected, to solve that you need to go back into “Edit Block in Place” mode to deselect the entity.
|
|
2366 | QCAD (main) | Bug Report | Low | File > Advanced SVG Export: not launching | Closed | |
|
Task Description
Exception when populating scale combo box
|
|
2369 | QCAD (main) | Bug Report | Low | File > Menu Open and Import fails for pdf | Closed | |
|
Task Description
Command Open and Import fails for pdf
Forum report: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9332&p=37508#p37508
|
|
2382 | QCAD (main) | Bug Report | Low | DGN file load / import fails | Closed | |
|
Task Description
dgn file load / import fails in Pro and Trial. https://www.qcad.org/rsforum/viewtopic.php?f=2&t=9444
Warnings:
|
|
2389 | QCAD/CAM | Bug Report | Low | Import tools (KI) triggers a warning that the import fa ... | Closed | |
|
Task Description
... despite the fact it was successful.
|
|
2402 | QCAD (main) | Bug Report | Low | Selection Filter fails for different filter scenarios. | Closed | |
|
Task Description
Please refer to the user report below: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9586&p=38653#p38653 Note: 3.27.6.0 (3.27.6) works as intended.
Thanks.
|
|
2409 | QCAD (main) | Bug Report | Low | Area measurement of hatches leads to a crash of QCAD | Closed | |
|
Task Description
Reported in the QCAD Forum by TSG on a macOS Catalina system. Details on this topic can be found at https://www.qcad.org/rsforum/viewtopic.php?f=89&t=9603#p38738.
|
|
2410 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Graphics View > Fonts: ... | Closed | |
2 |
Task Description
Edit: And it fails often to read the menu at all at the first time. A second try will display the information ...
|
|
2413 | QCAD (main) | Bug Report | Low | Layer > (De-)Select Layer Entities: Default shortcuts Y ... | Closed | |
|
Task Description
Shortcut Y+, Y- fails for selecting Layer Entities in a Layer List. Letter is ignored and +, - zooms the drawing
|
|
2414 | QCAD (main) | Bug Report | Low | Shortcut YR, YE etc fails when layer is marked. | Closed | |
|
Task Description
Shortcut YR, YE etc. fails for marked Layer. It works at active layer.
|
|
2417 | QCAD (main) | Bug Report | Low | Insert Measurement/e.g. d1 Point to Point fails within ... | Closed | |
|
Task Description
Insert Measurement / e.g. Point to Point fails within Coordinate (SX) dialog. It is offered for X and Y but I can’t find a way to use it. For a proper measurement with IP I need to use Autosnap etc. but that means I have to switch from Coordinate snap to an other snap with no way to return to use the d1 variable.
|
|
2434 | QCAD (main) | Bug Report | Low | Rotate Viewport fails | Closed | |
1 |
Task Description
Rotating a Viewport will lead to rotate the drawing in the viewport but not the Viewport itself. This will happen during a creation process by using VT or afterward by editing a viewport in the Property Editor.
|
|
2437 | QCAD (main) | Bug Report | Low | Application Preferences, Graphics View, Fonts, Font siz ... | Closed | |
|
Task Description
no task description |
|
2441 | QCAD (main) | Bug Report | Low | File > Print Preview: auto fit to paper repeated when s ... | Closed | |
1 |
Task Description
Case: Launch Print preview (first time), confirm dialog “Auto fit drawing to paper?” with yes, change after that the scale, close Print Preview, launch Print Preview - the last chosen scale what should be remembered is overwritten by the Auto fit scale.
Note: The Auto fit scale stays persistent - even after reloading the drawing!
The option “Auto fit drawing to paper?” as a dialog occurs only the first time you use Print Preview - there is no way to change the chosen option later in a session or after reloading the drawing ...
|
|
2449 | QCAD (main) | Bug Report | Low | Adjusted Alfa value for solid hatch not saved with draw ... | Closed | |
|
Task Description
Tested on CE and Pro. Alfa value on load is always 255 ...
Please refer also to topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9800
|
|
2459 | QCAD (main) | Bug Report | Low | Linetype scale of blocks in viewports not scaled accord ... | Closed | |
1 |
Task Description
Reported in forum 2 times: https://www.qcad.org/rsforum/viewtopic.php?f=95&t=9887&p=40202&hilit=bugtracker#p40202 https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9916&p=40298#p40298
Most likely the issue exist since QCAD Vers. < 3.25.2.0 (3.25.2)
|
|
2460 | QCAD/CAM | Bug Report | Low | Tab Lengths incorrect | Closed | |
|
Task Description
Tab value specification in Option bar: Lengths 2, Thickness 1 G-code Lengths = 8.35 (in my example), Thickness 1
|
|
2466 | Website | Bug Report | Low | Website QCAD documentation/features | Closed | |
|
Task Description
“Default template to use for new drawings” is a Pro feature. Website state it is also a CC feature.
https://www.qcad.org/en/documentation/features
|
|
2469 | QCAD (main) | Bug Report | Low | Invisible switch fails partly at Block Reference with A ... | Closed | |
1 |
Task Description
A block with attributes inserted into Model_Space can’t be made completely invisible with the invisible switch (Eye icon) in the block list. It works for entities but not on attributes.
|
|
2546 | QCAD (main) | Bug Report | Low | After unit change "Autofit drawing to page" - fails | Closed | |
|
Task Description
Hi,
tested with back_plate.dxf (QCAD Tutorial Example)
Drawing is original mm, metric, A4. Printprewiew works, Autofit Drawing to page etc. works as expected!
In Drawing Preferences: Changed settings to inch, imperial, Ansi A Printpreview works but options like “Autofit Drawing to page” and “Autofit pages to drawing” are not working as usual ...
Went back to mm etc - everything works again as expected.
|
|
584 | QCAD (main) | Bug Report | Low | Library Items können unbrauchbar gemacht werden durch l... | Assigned | |
1 |
Task Description
Nach einigen Überraschungen ....
Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....
Fallbeispiel 1: Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt. Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat. Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will. In der Blocklist ist es natürlich immer noch verfügbar. In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden. Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt. Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.
Fallbeispiel 2: Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.
Fallbeispiel 3: Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....
Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?
|
|
645 | QCAD (main) | Bug Report | Low | Inch - Layerdata / Linewight still in mm ... | Assigned | |
|
Task Description
Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....
I like it ... but maybe I’m the only one
|
|
705 | QCAD (main) | Bug Report | Low | Verwaltung Library Resourcen und Favoriten .... | Assigned | |
|
Task Description
Ob dies ein Feature Request oder ein Bugreport ist weiß ich nicht ....
Hier meine Gedanken ....
In den Application Preferences kann ich mehrere Library Sources vorgeben. Ich habe eine auf dem HD und eine auf einen USB angegeben.
Wenn ich nun QCad auf der HD ausführe habe ich beide Ressourcen zur Verfügung. Schön! Natürlich habe ich auch im Library Browser meine Favoriten von beiden Ressourcen angegeben.
Wenn ich nun aber den USB entferne zeigt mir der Library Browser immer noch beide Resorcen als Name an - schalte ich nun um auf die USB Resource bekomme ich keinerlei Hinweis das diese momentan nicht zur Verfügung steht. Es passiert einfach NIX Es wäre schön wenn ich hier eine “Nicht verfügbar” Meldung bekommen würde.
Wenn ich nun meine Trotteligkeit bemerke und den USB wieder einstecke habe ich logischerweise wieder meine Library zur Verfügung ..... nur die auf den USB Stick verweisenden Favoriten sind auf Nimmerwiedersehen verschwunden. Die auf dem HD bleiben erhalten!
OK - um es ganz rund zu machen ein anderes Szenarios in “Steno”: QCad Start vom USB - > Library Favoriten anlegen auf USB Library - > QCad schließen - > USB entfernen → QCad auf HD starten - > Library Favoriten auf USB sind verschwunden - > QCad HD schließen - > USB einstecken und QCad von USB starten = Favoriten auf USB bleiben verloren!
Wäre es hier nicht möglich die Favoriten Information dem USB mit auf dem Weg zu geben? Wenn ich eine Favoriten Auswahl auf dem USB nicht kontrollieren kann macht diese Möglichkeit kaum Sinn.
|
|
756 | QCAD (main) | Bug Report | Low | Display problem in the Text "Character Map" ... | Assigned | |
1 |
Task Description
XP/32
Go to: Text → Special Characters → Others → “Character Map” pops up. Adjust Zoom to 100% = display problem (not enough space for the single character.
|
|
864 | QCAD (main) | Bug Report | Low | Template Preview/Info doesn't shows the sheet orientati... | Assigned | |
1 |
Task Description
“Create New Drawing from Template” Browser can’t readout the Page orientation ...
|
|
893 | QCAD (main) | Bug Report | Low | Library Browser - Edit Library Item - opens drawings al... | Assigned | |
|
Task Description
Library Browser - Edit Library Item - opens drawings always with grid.
- If I switch between opened drawings back and forth the grid will disappear .... - If I switch the grid button between visible (it is already visible!) and invisible the grid is gone ....
Just Cosmetic ...
|
|
980 | QCAD (main) | Bug Report | Low | Isometric Projection / blocks / wrong layer are used in... | Assigned | |
|
Task Description
Isometric Projection used on a selection which contains blocks will mix up the layer affiliations. No blocks - no problems
|
|
1087 | QCAD (main) | Bug Report | Low | Ruler ticks are not corresponding to the grid points | Assigned | |
1 |
Task Description
Ruler ticks are not corresponding to the grid points, Ruler will completely disappear at a certain zoom level,
Settings: Drawing unit: inch, Grid settings: Grid 1, Meta Grid 12, Dim Label Format: “Engineering, 0’-0.0”
see topic below: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014
|
|
1214 | QCAD (main) | Bug Report | Low | Array of blocks -> Clipboard -> "flip pasted entities" ... | Assigned | |
1 |
Task Description
Case:
Select a block array, put it with “Copy with reference” or “Cut with reference” into the clipboard, choose a reference point which isn’t in the center of the array, use the paste tool / with option “flip pasted entities”
If I flip only in horizontal or vertical direction the preview box will double in size and I can’t place the entities precisely regarding to the reference point. If I try to flip in both directions at the same time - you can’t see this effect.
|
|
1719 | QCAD (main) | Bug Report | Very Low | Undo on converted drawing leads to wrong label position... | Assigned | |
|
Task Description
Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.
|