|
1260 | QCAD (main) | Bug Report | Low | "Break out segment" again arc is not a sharp cut to the ... | Closed | |
|
Task Description
Break out segment / Auto trim again arc is not a sharp cut to the arc (to long or to short), Break out manual can’t snap to a line/arc intersection,
|
|
1262 | QCAD (main) | Feature Request | Low | Missing some kind of "QCAD is still working" indicator. | Assigned | |
1 |
Task Description
If I have to do some kind of intense tasks like converting a previous Polyline, which is now exploded to lines (maybe a couple hundred thousand short lines) back to a polyline (Polyline/Create from Segments) QCAD needs time to do that. In this “working time” I can’t see any indicator that QCAD is working. Not a Hourglass on the mouse or some other indicator. I have just the feeling: Nothing is going on right now ...
It would be nice to have some kind of visual info that QCAD is working.
|
|
1267 | QCAD (main) | Bug Report | Low | Options for Print Preview not correct working | Closed | |
|
Task Description
Please double check the functionality of the Print options - I think that there are not correct working.
Move Paper position = OK, Autofit drawing to paper = out of center, wrong scale Autofit pages to drawing = to many pages are used, Auto center = out of center,
|
|
1272 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: not undoable when used on spline | Closed | |
|
Task Description
Scenario 1: like to use “Breakout segment” on a spline, Status bar tells me that I CAN use this tool on a spline, Breakout: works, Undo: works, Everything fine ...
Scenario 2: like to use “Breakout manual” on a spline, Status bar tells me NOT to use this tool on a spline but ... Breakout manual: works, Undo: works, I think just the status bar needs an Infotext update.
Scenario 3: like to use “Auto Trim” on a spline, Status bar tells me NOT to use this tool on a spline but ... Auto Trim: works, Undo: works NOT, I think the status bar needs an Infotext update and I guess in the undo function is a bug.
|
|
1276 | QCAD (main) | Bug Report | Low | File > Print Preview: black/white, grayscale mode have ... | Closed | |
|
Task Description
Print Preview: Black and white/Greyscale mode doesn’t works on Text.
|
|
1277 | QCAD (main) | Bug Report | Low | Block > Insert Block: block Attributes invisible by def ... | Closed | |
|
Task Description
I defined new attributes in a 3.11.0 drawing. I can’t get it working. I loaded an old drawing, knowing that there are working attribute in - there are not anymore working in 3.11.0
Synchronize Attributes doesn’t helps to solve the problem.
Old drawing attached ...
|
|
1284 | QCAD (main) | Feature Request | Low | Count up counter for consecutive number labeling | Closed | |
|
Task Description
please see below:
http://www.qcad.org/rsforum/viewtopic.php?f=107&t=3781
|
|
1289 | QCAD (main) | Bug Report | Low | Spline from fit points: load error for non-periodic but ... | Closed | |
|
Task Description
After saving an open designed Spline QCad will open it the next time as a closed spline. Trying to fix this in the Property Manager using “Closed Periodic yes/no” leads to an open but broken spline.
Pic 1 = designed Pic 2 = saved/opened from HD Pic 3 = Try to fix this with the Property Manager
|
|
1302 | QCAD (main) | Feature Request | Low | Isometric projection on the current layer | Assigned | |
1 |
Task Description
It would be very useful to have the same possibility for Isometric projection like the Paste tool etc.. An option which ask me to put a new Isometric projection on the current layer is right now missing. If I like to have this new Isometric Projection on a different layer I have to reselect the projection and move it to that layer. That is plain inconvenient.
|
|
1325 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: trims to invisible entities | Closed | |
|
Task Description
“Autotrim” ignores status on invisible and/or blocked layer and will still trim along invisible entities.
|
|
1326 | QCAD (main) | Bug Report | Low | Draw > Circle > 2 Tangents and Radius: not all solution ... | Closed | |
|
Task Description
If I try to draw a circle between two little circles with a radius (e.g.) of 3000 the tool shows me only two possibility’s - but there are much more. If I make a counter test with the tool “2 Tangents with Point” all possibility’s are correct shown.
first pic “2 Tangents with Point” correct,
second pic “2 Tangents + Radius” incorrect,
|
|
1362 | QCAD (main) | Feature Request | Low | new layer tool: Toggle visibility all | Assigned | |
1 |
Task Description
Hi,
I use a lot of “temp” layer to keep my drawing organized during a design session. Ad the end of the day (or week or month ...) I need to get rid of this “garbage” but unfortunately there is no easy way to delete all this layer in one go. Most of the time those layer are invisible. The “important layer” are visible. If I could toggle all layer from visible in invisible in one go with a switch like “Toggle visible layer all” and then use “Select all” / delete / Purge unused layer I’m able do get rid of this stuff with just a few clicks.
The same tool would help to improve the workflow in the case that I just have to switch between all visible / invisible layer for testing / double checking / cleaning or what ever. Currently I have to toggle every single layer to get this done and if I work with many layer I need to have a perfect working memory (or a piece of paper with many notes!) to be able to restore the same desired working order.
And I’m confident - there are many more useful scenarios for a tool like this one ...
pics: “Toggle visibility all” with one click:
|
|
1378 | QCAD (main) | Bug Report | Low | Wrong value separator accepted and accomplished | Closed | |
|
Task Description
My settings for Coordinate Format: Decimal Point = Dot
Accidentally using a comma instead of a dot in a value field leads to a wrong result without any warning.
Test:
Using the “Rectangle with Size” tool accidentally with a comma will not trigger a warning (red text) and it will draw a wrong sized rectangle. It seems to me that QCAD is using the after comma value to draw this rectangle. Given value 30,5 by 50,7 leads to a rectangle 5 by 7 Crazy values like 1.,.35 by 71.,.75 are also accepted and leads to a rectangle size of 35 by 75 without any warning. A crazy value like 71.,..75 will finally trigger a red text warning!
Counter test horiz. Line: Value 100,25 leads to a line with 25 in length. Value 100.25 leads to a line with 100.25 in length.
Using the same tools with the correct separator will work as expected!
Same game with most of all other tools which are asking for a given value. No warning at all - just wrongly accomplished.
|
|
1415 | QCAD (main) | Bug Report | Low | Text TE - Only simple text possible | Closed | |
|
Task Description
Text - Only simple text is possible. Checked or unchecked option “Simple Text” will not change this. Reboot QCAD after changing shows also no effect.
|
|
1427 | QCAD (main) | Bug Report | Low | Info Tool / Polylinie Area (II)/ Preview broken | Closed | |
|
Task Description
Print “Command Line” and as “Add measurement to drawing” works as expected.
|
|
1428 | QCAD (main) | Feature Request | Low | Snap middle of the minimum distance between two entity'... | Assigned | |
5 |
Task Description
Hi,
from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.
Pic 1: Given situation Pic 2: Result after using this new snap tool
Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?
|
|
1446 | QCAD (main) | Feature Request | Low | New Polygon tool | Assigned | |
2 |
Task Description
Hi,
if I need to design a bolt circle (circle on circle) and the single bolt diameter and the quantity of circles are given then I can use the QCAD Polygon Tool “Polygon 2 Points of Side” ... but for the Length of the side I have to do a workaround (Line with this length) to determine the desired length.
It would be very convenient to have an additional tool for a Polygon which has the possibility to ask me for the center, corners and the length of the sides.
|
|
1457 | Website | Bug Report | Low | Website FAQ Deutsch | Closed | |
|
Task Description
Beschreibung “Fehlerbehebung” fehlt. Anker verweist auf #Troubleshooting und führt ins Leere.
http://www.qcad.org/de/qcad-documentation/faq
|
|
1475 | QCAD (main) | Bug Report | Low | Print Preview / fit to pages fails ... | Closed | |
|
Task Description
... in dependence to the used Units.
I have notice this behavior a couple times before but wasn’t sure what is the trigger for that. Now I figured out one (I’m sure there are more) scenario which shows the effect:
New drawing, Drawing preferences; Drawing Units: Meter, Meter, Metric,
Printing Page: ISO A4
Print Preview:
Auto fit drawing to page - fails to calculate the scale, Auto fit pages to drawing - fails also ...
Counter test: same drawing - change Paper Unit to mm, Reset Paper size to A4 ...
... and it works flawless
|
|
1491 | QCAD (main) | Bug Report | Low | Layer > Create Layer from Selection: cancelling dialog ... | Closed | |
|
Task Description
Select entities, launch the Layer tool: Create Layer from Selection, change your mind - cancel this tool,
QCAD moves - regardless the cancellation - all selected entities to the active layer.
|
|
1502 | QCAD (main) | Feature Request | Low | Info tool / Setting for Font and Size ... | Assigned | |
2 |
Task Description
It would be nice if the Info Tool / Add Measurement to drawing option would use the same settings like the “Dimension settings” for Font and Text height. It’s a kind of similar function in a drawing and should have the same style. Maybe with an on/off switch?
|
|
1522 | QCAD (main) | Bug Report | Low | "Hatch from Segments" problem with polylines ... | Closed | |
|
Task Description
I tried to hatch an area and the Reference Manual said all entities can be used but it doesn’t works at my example. Did I missed something?
The test drawing shows at the top the goal with exploded polylines. At the bottom I have rectangles (Polylines, drawn with the Rectangle tool) what is unfortunately not working.
|
|
1527 | QCAD (main) | Suggestion | Low | "Zeichnungseinheit konvertieren" translation missing .. ... | Closed | |
|
Task Description
... for the Option bar.
|
|
1539 | QCAD (main) | Feature Request | Low | One more "Offset" option: Infinitive Line ... | Closed | |
1 |
Task Description
hi,
I miss one Offset option to use an offset indirectly related to the used entity. Right now I have to work with further construction lines and trim, divide, delete etc. tools to archive what I need. Basically an offset as a ray would be enough but unfortunately we have no control of the Ray orientation. This said - it would be nice to have an infinitive line added to the “Offset Polyline Segment” option to be able to use an Offset as construction line which is not only reflecting the shape of the source.
|
|
1577 | QCAD (main) | Feature Request | Low | Postfix for DIM / Remember last DIM Label ... | Assigned | |
1 |
Task Description
Hi,
unfortunately I need to use from time to time different Units in a drawing. It works nice with the Scale possibility but to keep my drawing readable I need to label then the DIM accordingly. Sadly I don’t have a Postfix option so I work with a workaround what means I use <>”, or <>’ and <>mm in the Prefix field. If I then terminate the DIM tool and start it again I will loose my settings except the Scale Factor.
May I ask for an additional Postfix option or/and a remember functionality of those fields?
|
|
1582 | QCAD (main) | Bug Report | Low | Layer > Show all Layers / Hide all Layers: unexpected o ... | Closed | |
|
Task Description
Hi,
if I create in a new drawing a layer list and use the Show all Layers / Hide all Layers function everything works as expected.
If I hide one or more Layers individually and directly in the Layer List (click on the Eye) I can’t make them visible with the Show all Layer function. It looks like individual hidden Layer are protected with a higher priority.
If I load an “old” drawing all individual settings for a hidden Layer are with a higher priority than Show all Layers. If I click every single Eye for each Layer to make them visible then I’m again able to toggle the visibility for all Layer in once.
|
|
1613 | QCAD (main) | Feature Request | Low | Add Orthogonal Option to Angelur DIM Tool ... | Assigned | |
1 |
Task Description
... please see below:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956
|
|
1616 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: leader arrow switched off | Closed | |
|
Task Description
Case: Existing Leader with Arrow status “yes” in drawing, launch “Convert Drawing Unit”, convert drawing unit, Leader status for Arrow “yes” is now changed to “no”,
|
|
1617 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: Views in view list not con ... | Closed | |
|
Task Description
Case: Drawing in mm with Entries in the View List, Convert (CU) drawing from mm to inch, View List still exist but has lost the coordinates for each defined window,
|
|
1625 | QCAD (main) | Feature Request | Low | Copy Layer | Closed | |
|
Task Description
Hi,
often I’m in the situation that I have to create an additional Layer mostly based on the settings from an already existing Layer. Just a question of organization. This new Layer has then everything identical except the name and one(?) Attribute. This could be that only the color or the Line weight deviates.
Example:
Existing Layer
Layer name: Lot 47 area existing
Attributes
Color: Red
Lineweight: 0.35
Linetype: Dashed
New Layer
Layer name: Lot 47 area proposal
Attributes
Color: Blue
Lineweight: 0.35
Linetype: Dashed
Unfortunately if done manually it happens in an blink of an eye that the human imperfection (me!) makes a mistake and (e.g.) a “Center (.5x)” finds it way into the Linetype Field instead of a “Center (.2x)” ....
The workaround for a few User is to use in cases like this the Property Editor / General Property and customize single Attributes. In my opinion the first step to lose the control over your own drawing ...
A “Copy Layer” / Copy Layer Attributes” function would speed up this task and eliminate to a minimum the “human imperfection” factor.
I could imagine that a right click (like copy block) on the Layer triggers the “Add Layer” function and the dialog is already prefigured with the Settings of the Source Layer ...... ready for editing. The new Layer itself is “empty” like any other new Layer.
|
|
1628 | QCAD (main) | Feature Request | Low | Move / Copy and snap tangential | Assigned | |
3 |
Task Description
Please see:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601
|
|
1629 | QCAD (main) | Feature Request | Low | Add additional Option to Angelur DIM Tool | Assigned | |
|
Task Description
Please see:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956
|
|
1635 | QCAD (main) | Bug Report | Low | Print current view / Portrait | Closed | |
|
Task Description
Hi,
if I use the “Print current view” tool for a Landscape format - everything works just nicely! If I use it for a Portrait print - the scale is way of.
For this example I used a rectangle as reference. The details what I’m looking for are captured with same sized red rectangles. The Paper orientation was changed before I used the Print command. To have the maximum view I select the rectangle and used “Zoom to selection” - then Print to current view.
Portrait, scale way of: Husky-2017.09.25-03.png
Portrait, manual adjusted - it should look close to this one: Husky-2017.09.25-04.png
I attache for testing the dxf too.
|
|
1642 | QCAD (main) | Bug Report | Low | Selection Filter / Line / Continuous | Closed | |
|
Task Description
The Selection Filter doesn’t works proper with a Line / Continuous combination. Example drawing has Linetype by Layer and not by Layer
Filter Entity type: Line Property: Linetype Comparison: = (is) Value: Continuous
... doesn’t finds what I have ask for. Husky-2017.10.05-04.png
Filter Entity type: Line Property: Linetype Comparison: ≠ (is not) Value: Continuous
... finds more than that what I have ask for. Husky-2017.10.05-03
|
|
1653 | QCAD (main) | Bug Report | Low | Dimension font configuration only loaded if drawing con ... | Closed | |
|
Task Description
This bugs me since a long time but I wasn’t able to reproduce it ..... till now!
My Dim Label font for new drawings (Application Preferences) is set to “Helvetica-Bold” Basically it was working just fine for new drawings but from time to time, after saving and reopen my drawing, the font was lost and replaced by “Standard”. No idea why!
Today I was playing with the new QCAD Feature “Default Template” and learned that I loose all the time my preselected font. QCAD ignores that my Template “Drawing Preferences” and also the “Application Preferences” are set to “Helvetica-Bold”. It will be replaced by “Standard”. Annoying!
Ok, question was why it doesn’t happened with all drawings, all the time? After many tests .... The “old” blank Template opens with the correct font setting. If I use a Dim in the drawing and save it everything works as expected. If I save the drawing without a Dim in it then the preselected Font will be replaced by “Standard”. It happens also if I delete all Dims in a so far proper working drawing - save and reopen it leads to the same issue. The Font will be replaced by “Standard”.
The new feature “your own Default Template” will not work regarding the Dim Label font in any cases - the template itself needs at least one Dim in the drawing to keep the desired Font.
|
|
1654 | QCAD (main) | Feature Request | Low | Edit > Convert Drawing Unit: convert viewports | Closed | |
|
Task Description
Converting the Drawing unit (CU) in Model Space will ruin all preexisting Viewport arrangements in your Layout Block. You have to rebuilt them from stretch or undo the unit conversion.
|
|
1661 | QCAD (main) | Bug Report | Low | Viewport rotation issue | Closed | |
|
Task Description
Case:
1. Launch Add Viewport, adjust setting for scale and rotation, determine Viewport - QCAD will switch to a Layout Block = scale and rotation works as expected.
2. Launch Add Viewport, determine Viewport - QCAD will switch to a Layout Block,
change scale setting = works as expected on view and frame,
change rotation = works on view BUT NOT ON VIEWPORT FRAME.
|
|
1669 | QCAD (main) | Bug Report | Low | Edit > Application Preferences > Defaults for New Drawi ... | Closed | |
|
Task Description
Blank QCAD template used as the start drawing.
Application Preferences / Dimension Settings
Text hight doesn’t accept anymore input 3.5/25.4 and it will change that in a new drawing to “0” instead to show 0.137795
If I remember correctly: Marked for “Keep proportions” = unchecked in new drawing is desired behavior, correct?
|
|
1670 | QCAD (main) | Bug Report | Low | Layout Blocks are not using print settings from Applica ... | Closed | |
|
Task Description
My settings below Application Preferences: Dimension Settings Drawing Unit: Inch Paper Unit: Inch Measurement System: Imperial
Printing - Page Page Orientation: Landscape Paper size: ANSI A (Letter) Paper width: 8.5” Paper height: 11”
Printing Colors Color Mode: Black / white
Blank QCAD template used as the start drawing.
Issue in Layout Block
Printing Color Black/White changed to “Full Color Mode”, Default setting to use ANSI A will change to ISO A4 in mm regardless that the Paper Unit is inch and size ANSI A. Unit is unstable when you change the format a few times. It will switch between mm and inch what can lead to a 8.5 mm x 11 mm Paper size (then called customized!) or 210” x 297” ANSI A4,
Paper orientation preset to Landscape is then Portrait in Layout Block
|
|
1671 | QCAD (main) | Bug Report | Low | Block > Add Layout Block: fails if layout with same nam ... | Closed | |
|
Task Description
Case
delete a Layout Block in Block List - name e.g. ANSI A P, create a new Layout Block - try to use the deleted name (ANSI A P) again and it will be declined because the “Layout already exists.
|
|
1672 | QCAD (main) | Bug Report | Low | Dimension tool displays wrong meassurement | Closed | |
|
Task Description
Case: Settings are: General: Drawing Unit Drawing Unit: Foot Paper Unit: Inch Measurement System: Imperial
Dimension Settings: Architectural
Issue:
I draw a horizontal line 12 units (foot) long, Use then the Horizontal DIM tool and it will display a measurement of 1’ = false,
I draw a horizontal line of 2 units (foot)long, Use then the Horizontal DIM tool and it will display a measurement of 2” = false,
I assume the input for the line length is handled from the DIM tool as inch and not as feet.
|
|
1677 | QCAD (main) | Bug Report | Low | Dimension: Scale option grayed out in model space | Closed | |
|
Task Description
... impossible to chose a scale in the DIM option bar.
|
|
1679 | QCAD (main) | Bug Report | Low | Print Preview scale format metric/imperial selection bo ... | Closed | |
|
Task Description
Not sure: Bug or feature request. However - it’s right now confusing
It would be nice if the scale format list would respond to the “Measurement System (for line types and hatch patterns)” setting.
If my setting is Metric:
1:1
1:2
1:5 etc etc
If my settings is imperial:
1”=1”
1”=2”
1”=4” etc etc
|
|
1686 | QCAD (main) | Bug Report | Low | File > Print: Line scale in Viewport wrong if Model_Spa ... | Closed | |
|
Task Description
Case: Line / Lineweight 2mm Model_Space Print Preview off / previously used scale was 1:1 Viewport 1:10 Paper_Space Print Preview scale 1:1 I’ll use the Paper_Space for a print: Works as expected. A 2 mm Line will be printed in 2 mm
__
Line / Lineweight 2mm Model_Space Print Preview off / previously used scale was 1:10 (closed Preview will keep it in memory), Viewport 1:10 Paper_Space Print Preview scale 1:1 I’ll use the Paper_Space for a print: Works not as expected! The Model_Space Print scale is used for scaling the 2 mm Line in the Paper_Space/Viewport. The Line will be printed with a 20 mm wideness.
|
|
1688 | QCAD (main) | Bug Report | Low | Scaling (SZ) selection by Mouse only proportional possi ... | Closed | |
|
Task Description
Tested with checked / unchecked button for proportional scaling - but it doesn’t matter.
|
|
1715 | QCAD (main) | Bug Report | Low | Print option "Auto fit pages to drawing" broken | Closed | |
|
Task Description
Print option “Auto fit pages to drawing” broken.
|
|
1720 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: fails for Rays and Infinite Lines | Closed | |
|
Task Description
... if other entities involved.
Testdrawing: Please use the Auto Trim tool first with visible and then with invisible Block Countertop. The effect can change depending on where you click.
|
|
1769 | QCAD (main) | Bug Report | Low | QCAD Help link to "FAQ's (Online) is broken | Closed | |
|
Task Description
QCAD 3.20.1.3 help link to “FAQ‘s (Online)” is broken and leads to a 404 page. (Menu → Help → FAQ‘s (Online))
|
|
1770 | Website | Bug Report | Low | qcad.org shop language | Closed | |
|
Task Description
FR - Ok, DE - Ok,
EN - not OK. Main text is in english, menu is in german.
|
|
1785 | QCAD (main) | Bug Report | Low | Template / Viewport scale issue | Closed | |
|
Task Description
Given: Template with prepared Paper Space Frame/Titleblock scale = 1:1. Drawing 1:1 First Viewport / scale 1:1 / inserted in Paper Space = everything fine, Second Viewport / scale 0.02 will scale the Paper respective to the new Viewport scale but the Frame/Titleblock isn’t scaled.
|