QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatus  descProgress
1743QCAD (main)Bug ReportVery LowDraw > Text: Wrong bounding box for text with empty sup...Assigned
0%
1 Task Description

Hi,

I have a drawing where I use text with superscript. In this case when I use autozoom, it does not work as I expect. It includes the 0,0 coordinates too. The problem also occures when I export the drawing into svg.

I attached an example, just use the autozoom.

Thanks,
Soma


1749QCAD (main)Feature RequestLowAdd support for non-uniform block scalingAssigned
0%
1 Task Description

Same txt as on the forum.
had a copy because i had to log in 3 times to remark my own post.

Blocks are no solution either.

see pdf
[attachment=0]Block test_1.pdf[/attachment]

Antartica is put in a block as segments.
Added a rounded corner as segments and as poly.
scaled X x0.5 Y x1 origin the center of the magenta circl.

The scaled version is all over the place.
Set them to color red, no use they stay black.

The reference of the block is 2000mm to the left because I tried it out far right of my design.
The cyan circle is about 400mm in diameter.

dxf part included
[attachment=1]Block test.dxf[/attachment]

Version: 3.20.1.0 (3.20.1)
Internet: QCAD.org
Build Date: Apr 13 2018
Revision: dd51609
Qt Version: 5.5.1
Architecture: i386
Compiler: MSVC++ 10.0 (2010)

CVH

1754QCAD (main)SuggestionLowWhen Selecting multiple blocks that contain the same at...Assigned
0%
Task Description

When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.

1755QCAD (main)Feature RequestLowSelecting standard rotation angles by mouse click for M...Assigned
0%
1 Task Description

This would be nice.
It will save a lot mouse - keypad changes for me.

1759QCAD (main)SuggestionVery LowModify // .... selection of entities on locked layer al...Assigned
0%
Task Description

Without any selection.
Entities on a locked layer can be selected after choosing:

Asumed wrong
- Modify DI
- Modify
B2
- Modify D3
- Modify
MT

Questionable
- Modify RM
- Modify
CH
- Modify RN Less severe
- Modify
OF
- Modify OH
- Modify
SS

Regards

1760QCAD (main)Bug ReportVery LowSelf-crossing polylines can't be cut twice at segment c...Assigned
0%
Task Description

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 

Regards

1762QCAD (main)Bug ReportVery LowModify // .... selection of entities on locked layer al...Assigned
0%
Task Description

Not served with the degration to ‘Suggestion’ FS#1759.
Demanded closing FS#1759 & re-entered

Locking entities (by layer) to avoid selection,eg. nearby,very close by or on the same spot, does not have the intended influence.

Asumed wrong:
- Modify DI
- Modify B2
- Modify D3
- Modify MT
These 4 need a single entity to be selected and selection of a locked entity is allowed.(=questionable)
The action will allways leed to ‘not allowed’.(=correct)

Questionable:
- Modify RM
- Modify CH
- Modify RN
These 3 need a pair of entities.
RM: Selection of a locked limiting entity is allowed (=questionable), enity to trim not.(=correct)
The action will trim unlocked entities to the locked limiter.(=questionable)
CH & RN: Selection of a pair of entities is allowed.(=questionable)
Trimming if ‘trim’ is on will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation of the bevel or rounding on an active locked layer will not occur because locked and leeds to ‘not allowed’.(=correct)
The creation, except for polyline segments (because locked themself), on an active unlocked layer will be done.(=correct)

Less severe but still questionable: (because these don’t necerally act on the locked entities themselves)
- Modify OF
- Modify OH
- Modify SS
OF: Selection of a locked base entity is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
OH: Selection of a locked base entity is allowed.(=questionable)
Selection of point references from entities on locked layers is allowed.(=questionable)
The preview is casted only if the active layer is unlocked.(=correct)
The creation is only done on an active unlocked layer.(=correct)
SS: Selection of point references from entities on locked layers is allowed.(=questionable)
Strechting is only done for unlocked entities. (=correct)

1764QCAD (main)Feature RequestLowZoom in with middle clickAssigned
0%
1 Task Description

I would suggest adding a feature Inkscape has, which is that a single middle click zooms in. This is not at the detriment of panning, since the mouse/pen (I use a Wacom tablet) doesn’t move. Right now middle click doesn’t do anything so I don’t think it should be a problem.

Another awesome and related Inkscape zooming feature is that Shift+middle click shifts to window zooming. But with the added bonus that you don’t lose the tool you’re in. Try it out on Inkscape if I’m not clear!

Cheers,
JFL

1765QCAD (main)Bug ReportVery LowErrors with polyline offsetAssigned
0%
1 Task Description

Win 7 32 bit QCAD 3.20.1

Ofsset of a base-line with arcs results in massive ammount of errors.
Most of them occur as a cluster of very tiny segments and are part of the offset. (zoom far in at the red circles)
Mostly they occur where the offsetted arcs should merely be trimmend pairwise.
Some occur as detached entities or as detached strings of entities very near the offset (strings not documented).
Spooks occur at opposite site when base-line is not closed.
360° curls can occur with R = Offset.
Null-entities may occur (not documented, hard to find and not able to copy).

The base-line is checked and sound and has mixed tangentially or not tangentially connected arcs.
Offsetting the mother base-line of the base in the file has similar effect but not all and/or different ones.
Also encountered with offseting polys from fonts.
Used to define pocket paths for CNC.
Detected because the CNC driver will not accept Self-crossers, Null-entities or open ends depending on the settings.

Work arround is to explode and select small entities but this does not solves the issues.
1) Choosing the tolerance large enough will detect small segments that should stay.
2) Recombining will generate new ones at the place where the main segments remain crossed.
Cleaning up the paths is a daunting process with some thousand segments for several offsets.

I assume this has an infuence on the CAM part of QCAD too unless the offset method is different.

1324QCAD/CAMSuggestionVery LowConfusing Copy / Move optionAssigned
0%
Task Description

Hi,

Using the Copy and Move command the [ ] Use current layer and attributes’ is confusing.

Perhaps [ ] change copy /moved set to current layers and attributes. is more suitable.

1369QCAD/CAMBug ReportVery Lowqcad-bin is trying to access non-existent /home/andrewAssigned
0%
Task Description

I experience long start delays. I’ve trace the problem to the fact that I have autofs automounting my home directories. However, an strace of qcad-bin shows the following:

execve("/opt/ribbonsoft/qcad/qcad-3.12.6/qcad-bin", ["/opt/ribbonsoft/qcad/qcad-3.12.6"...], [/* 87 vars */]) = 0
brk(NULL)                               = 0x1eca000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd6194ad000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib", 0x7fff4722f250) = -1 ENOENT (No such file or directory)

Since there is no “andrew” user here, I have to wait for automount to timeout which takes about 2m and is rather annoying.

513TranslationBug ReportLowTranslation errors (German, French, Italian, Spanish, P...Assigned
0%
Task Description

If you spot an error in the translated user interface of QCAD, please add a comment to this task.
Thank you for your help!

Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu.
Vielen Dank für Ihre Hilfe!

Si vous constatez une erreur dans l’interface utilisateur traduite de QCAD, s’il vous plaît ajouter un commentaire à ce rapport.
Merci pour votre aide!

Si usted encuentra un error en la interfaz de usuario traducida de QCAD, por favor, añadir un comentario a este informe.
Gracias por tu ayuda!

Se você encontrar um erro na interface do usuário traduzidos do QCAD, por favor, adicione um comentário a este relatório.
Obrigado por sua ajuda!

Showing tasks 351 - 362 of 362 Page 8 of 8<<First - 4 - 5 - 6 - 7 - 8

Available keyboard shortcuts

Tasklist

Task Details

Task Editing