|
2533 | QCAD (main) | Bug Report | Low | Surveyor's units never seem to display when selected as... | Assigned | |
|
Task Description
I've tried several times to try to see what the "surveyor's units" option of the Angular Dimensions format in the UI preferences will display as, but all it ever seems to do is cause the angle measurement to become blank. No angles are displayed whenever this mode is selected.
Indeed, I cannot figure out what the setting actually does besides causing angles to never be displayed.
Is there a way to make this setting do something meaningful or is it just broken?
I found an old forum thread from 2016 about this same issue and it sounds like the same things is still happening since then.
I'm not a surveyor so I have no actual practical use for these units that I can yet see, but I just figured I'd add an report to the bug tracker here in case any developers aren't aware that the bug still seems to exist.
Does the setting do anything besides changing the displayed units in the status bar?
|
|
2538 | QCAD (main) | Bug Report | Very Low | Weight 2.11 French translation typo | Assigned | |
1 |
Task Description
Andrew,
When switched to French I detected a typo in the drop down box for Lineweight.
Weight 2.11mm is listed as 1.58mm {2.11m?} https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts#L1228-L1229 Also see attached image file.
May I ask why only ISO types have a comma instead of a point in French. The use of a comma is uncommon in the Property Editor even when that is the native decimal separator. I also detect an extra space between the value and ‘mm’ and that only for the ISO types.
This only occurs in: https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pl.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pt.ts
Probably not OS or QCAD version related.
Regards, CVH
|
|
2539 | QCAD (main) | Bug Report | Very Low | (Relative) Polar feet + surveyor notation fails. | Assigned | |
1 |
Task Description
Andrew,
A user essentially pointed out to an ACAD textbook example. https://qcad.org/bugtracker/index.php?do=details&task_id=2533 Step 3 of: https://autodesk.blogs.com/between_the_lines/2012/07/drawing-with-surveyors-units-in-autocad.html
Please refer to this topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10652
Regards, CVH
|
|
2543 | QCAD (main) | Bug Report | Low | Polygonal Area Tool (IR) creates shapes persistently, c... | Unconfirmed | |
1 |
Task Description
Upon activating the Polygonal Area Tool either by clicking on the toolbar or by the IR keyboard shortcut the tool will persistently draw a polygon without clicking anything. This happens with the mouse and the trackpad on the MacBook Pro. This was happening in 3.29.3, and then after I upgraded to 3.29.4. The MacOS version is 14.1 Sonoma.
|
|
2547 | QCAD (main) | Bug Report | Very Low | Block > Purge Unused Blocks > Removes _DatumFilled bloc... | Assigned | |
1 |
Task Description
Andrew,
The _DatumFilled Block used by Datum entities (DT) is considered as not used and is purged by Purge Unused Blocks (BP). There is no block association for these special types of arrowheads in QCAD.
After purging the Datums are not immediately updated but the special arrowheads will eventually disappear. Adding new Datums will not fix that.
Not problematic because the _DatumFilled Block is re-created on save/reload when Datum entities exists. Datums are updated.
Probably not OS or version related. Related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=10694
Best solution would be to support different types of arrowheads and all related: https://qcad.org/bugtracker/index.php?do=details&task_id=695 https://qcad.org/bugtracker/index.php?do=details&task_id=757 https://qcad.org/bugtracker/index.php?do=details&task_id=1157
Regards, CVH
|
|
2556 | QCAD (main) | Bug Report | Low | Win11 Printing Orientation Issue: Landscape >>Portrait | Assigned | |
|
Task Description
Andrew,
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10649
Already two different users report that Landscape is printed cropped in portrait format, both Win11. The behavior change occurred recently. Although the second user (rdtsc) reports the same behavior for latest Mabox Linux (Manjaro, Arch.)
Can not replicate that on Win7 32 bit nor on Win10 64 bit, both are no longer or not updated OS. For one, I have no orientation setting displayed in my printer dialog.
It seems not to be related to the QCAD version: Reported for: - Win11 QCAD Pro 3.29 - Win11 QCAD-CAM 3.27.8.0
Regards, CVH
|
|
2068 | QCAD Community Edition | Bug Report | Very Low | Non-english text in upper/lower index becomes UTF code | Assigned | |
|
Task Description
How to reproduce.
1. Create a text field with some non-english words in the upper index. (see attached pic1.png) 2. Save the project and close QCAD. 3. Run QCAD and open same project. 4. Now upper/lower indexed text becomes not human readable UTF codes. (see attached pic2.png)
Tried different fonts - doesn’t help.
Linux ntb-kirill 3.10.0-1062.12.1.el7.x86_64 #1 SMP Tue Feb 4 23:02:59 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux CentOS Linux release 7.7.1908 (Core)
|
|
2315 | QCAD Community Edition | Bug Report | Low | Crash after ~10-th times move Spline nodes | Assigned | |
|
Task Description
1. Create spline 2. Move spline nodes. After ~10 times move qcad is crashed with backtrace: Thread 9 “Thread (pooled)” received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x7fff56dc9640 (LWP 8224)] 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848) at /usr/include/qt5/QtCore/qlist.h:492 492 current→v = new T(*reinterpret_cast<T*>(src→v)); (gdb) bt #0 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848)
at /usr/include/qt5/QtCore/qlist.h:492
#1 QList<QSharedPointer<RShape> >::detach_helper (alloc=<optimized out>, this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:835 #2 QList<QSharedPointer<RShape> >::detach_helper (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:849 #3 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #4 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178 #5 0x00007ffff686182a in QList<QSharedPointer<RShape> >::end (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/qlist.h:342 #6 QList<QSharedPointer<RShape> >::last (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:364 #7 RSpline::appendToExploded (this=0×555557311510, line=...) at math/RSpline.cpp:964 #8 0x00007ffff6867059 in RSpline::getExploded (this=0×555557311510, segments=1457293328) at math/RSpline.cpp:919 #9 0x00007ffff686682a in RSpline::getLength (this=this@entry=0×555557311510) at math/RSpline.cpp:1026 #10 0x00007ffff6c11490 in RSplineData::getLength (this=<optimized out>, this=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineData.h:178 #11 RSplineEntity::getProperty (this=0x5555573114a0, propertyTypeId=..., humanReadable=<optimized out>, noAttributes=<optimized out>,
showOnRequest=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineEntity.cpp:253
#12 0x00007ffff67cc214 in RPropertyEditor::computePropertyValue (ccProp=...) at /usr/src/debug/qcad-3.27.0.0/src/core/RPropertyEditor.cpp:574 #13 0x00007ffff67d298f in QtConcurrent::FunctionWrapper1<void, RProperty&>::operator() (u=..., this=0x555557757f18)
at /usr/include/qt5/QtConcurrent/qtconcurrentfunctionwrappers.h:80
#14 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIteration (it=..., this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:68
#15 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIterations (this=0x555557757ee0,
sequenceBeginIterator=..., beginIndex=<optimized out>, endIndex=15) at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:77
#16 0x00007ffff67d2c9d in QtConcurrent::IterateKernel<QList<RProperty>::iterator, void>::forThreadFunction (this=0x555557757ee0)
at /usr/include/qt5/QtConcurrent/qtconcurrentiteratekernel.h:255
#17 0x00007ffff44b5b2d in QtConcurrent::ThreadEngineBase::run (this=0x555557757f20) at qtconcurrentthreadengine.cpp:302 #18 0x00007ffff59c8d52 in QThreadPoolThread::run (this=0x555556198b10) at thread/qthreadpool.cpp:100 #19 0x00007ffff59c5a61 in QThreadPrivate::start (arg=0x555556198b10) at thread/qthread_unix.cpp:329 #20 0x00007ffff546c717 in start_thread (arg=<optimized out>) at pthread_create.c:435 #21 0x00007ffff54f018c in clone3 () from /lib64/libc.so.6 (
|
|
2386 | QCAD Community Edition | Bug Report | Low | Label "Linear format" missing in Property Editor | Assigned | |
|
Task Description
no task description |
|
2391 | QCAD Community Edition | Bug Report | Low | Fix Dark Theme for Linux | Assigned | |
|
Task Description
The dark theme for Linux is broken:
- Some icons have dark background (expected) and black foreground color (that should be replaced by white of very light gray) - Some icons have light background (not cohesive with the theme). - The command history shows dark blue font on dark gray background. - The grid’s ruler shows black font over dark background for the numbers. - The icons folder is missing in the GitHub repository, but other themes have that folder. - The general icons (open, save, and so on) are not dark theme friendly. A better approach for maybe all the themes would be to use something like the breeze icons pack for LibreOffice, and it will have the added benefit of making the app look more modern.
The icons issue is the biggest problem. They should probably replace the black color for white or very light gray. Even the red accent color is not ideal for dark themes, is not the main issue.
Attached is an image that show the problems and another that shows LibreOffice with the Dark Breeze theme for reference.
|
|
2405 | QCAD Community Edition | Bug Report | Low | Dimension scaling not working | Assigned | |
|
Task Description
I’m using QCAD Community Edition 3.27.7 on Windows 11.
When I started my drawing, I was able to change the size scale factor of (existing) dimensions using “Edit/Drawing Preferences/Dimension/Dimension Settings/Size scale factor”. However, suddenly this feature stopped working and now I cannot switch the dimension scale factor any longer.
I used this feature to be able to adapt the scale factor of the dimensions when printing in different scales. I.e. all my drawings are in “original” size but when it comes to printing, I print some parts in scale 1:2 (in which case I used to set the size scale factor of the dimensions to 2) and some parts in scale 1:10 (in which case I used to set the scale factor of the dimensions to 10). Using this procedure, the dimensions have the same size (font size, arrow size, gaps etc.) on both drawings.
I have attached the drawing, that shows the described issues.
|
|
1843 | QCAD/CAM | Bug Report | Low | Creating ToolPath Stalls | Assigned | |
|
Task Description
Hi Andrew,
Still working with and on CAM HPGL for the HP7580 pen plotter.
I have added a penplotter test drawing, that might be used for testing en callibrating plotter and pens. You may add it to the Examples-directory.
QCAD has a lot of trouble creating toolpaths and exports. Much too often it shuts itself down, or gets stalled. Why? I am not sure.
|
|
1847 | QCAD/CAM | Bug Report | Low | BUG MEMORY | Assigned | |
|
Task Description
Hi Andrew,
Still working on creating HPGL.PLT toolpaths for the HP7580 pen plotter. QCAD has some trouble creating toolpaths. Too often it shuts itself down, or the PC gets stalled.
Recreating the same error however is possible
|
|
1913 | QCAD/CAM | Bug Report | Low | 3D Simulation Behaves odd | Assigned | |
|
Task Description
Hallo Andrew,
testing the drill toolpath I used single point markers.
In 3D simulation the tool drills the toolpath AND uses the drill as a mill.
Cam Export and generated G-code is not effected.
|
|
1971 | QCAD/CAM | Bug Report | Low | CAD/CAM 3D Simulator | Assigned | |
|
Task Description
Hallo Andrew,
Found a bug in the 3D Simulator execution
|
|
2167 | QCAD/CAM | Bug Report | Low | Comma format decimal separator fails ZSafety CAM config... | Assigned | |
1 |
Task Description
QCAD/CAM Trial package Win installer 32 bit Version: 3.25.2.0 (3.25.2) Internet: QCAD.org Build Date: Sep 4 2020 Revision: 4a61501 Qt Version: 5.13.2 Architecture: i386 Compiler: Unknown
Local decimal separator is ‘,’ (comma) In CAM configuration .. Z Levels .. Safety level
Using nn,nnn the output is Nxx G0 Znn Using nn.nnn the output is Nxx G0 Znn.nnn
Drop down boxes are all in dot format. Didn’t try anything else yet
Regards, CVH
|
|
2558 | QCAD/CAM | Bug Report | Low | Offset trajectory path issue with circular Lead In/Out | Waiting on User | |
|
Task Description
Andrew,
Please refer to related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=10724#p44206
An eighth circle with radius 8 Lead In/Out relates to nothing in the actual exported cutter trajectory. Nor does it with the edge being cut.
Proper examples and a comparison with ‘Extension’ type Lead In/Out included. Conclusion: IMHO connecting the cutter trajectory and edge being cut is wrong.
It looks a lot like turning on Cutter Compensation (G41/42) while the motion is circular. But that is uncommon because most controllers can not cope with this motion. One can increase the offset gradually along a straight pre-entry segment for turning on G41/42 but not along a circular path. Also see snippet: - Pre-entry C→B turning on G41 - Circular Lead In B→A
Regards, CVH
|
|
513 | Translation | Bug Report | Low | Translation errors | Assigned | |
|
Task Description
If you spot an error in the translated user interface of QCAD, please add a comment to this task or submit your translation at http://translate.qcad.org. Thank you for your help!
Wenn Sie einen Fehler in der übersetzten Benutzeroberfläche von QCAD erkennen, fügen Sie bitte einen Kommentar zu diesem Report hinzu oder geben Sie Ihre Übersetzung ein unter http://translate.qcad.org. Vielen Dank für Ihre Hilfe!
Si vous remarquez une erreur dans l’interface utilisateur traduite de QCAD, veuillez ajouter un commentaire à cette tâche ou soumettre votre traduction à http://translate.qcad.org. Merci pour votre aide!
Si detecta un error en la interfaz de usuario traducida de QCAD, añada un comentario a esta tarea o envíe su traducción a http://translate.qcad.org. Gracias por tu ayuda!
Se si rileva un errore nell’interfaccia utente tradotta di QCAD, si prega di aggiungere un commento a questo compito o di inviare la traduzione a http://translate.qcad.org. Obrigado por sua ajuda!
Se você detectar um erro na interface de usuário traduzida do QCAD, adicione um comentário a esta tarefa ou envie sua tradução para http://translate.qcad.org. Obrigado pela sua ajuda!
Als u een fout ziet in de vertaalde gebruikersinterface van QCAD, voeg dan een opmerking toe aan deze taak of stuur uw vertaling naar http://translate.qcad.org. Bedankt voor uw hulp!
|