QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask Type  descSeveritySummaryStatusProgress
928QCAD (main)TaskLowCXF font editingAssigned
0%
1 Task Description

Port CXF font editor to QCAD 3.
- Load CXF fonts (load glyphs into blocks)
- Save back to CXF format

1678QCAD (main)SuggestionLowProperty Editor dialogAssigned
0%
Task Description

The line for “General properties”, “Layer” the line is too narrow,
so you do not see the layer name when the Property Editor is pinned to the side.
(see Forum - Suggestions and Feedback):
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239

1740QCAD (main)SuggestionLowMake unprintable layers also hidden in print previewAssigned
0%
Task Description

Make unprintable layers also hidden in print preview

1375QCAD (main)SuggestionVery LowInstall in hidden folderAssigned
0%
Task Description

After each update, I add a dot before the ~user/opt folder (and in the program launcher) created by QCAD to unclutter my file manager’s appearance. Would be easy, I think, to make the installer put the program directly in ~user/.opt, and nobody would miss that folder while browsing through daily used files.

And what about installing the program as root, so all users of a computer could use it without personal installs, and only personal setting files created by users would be kept in ~user/.opt/qcam.

Jean-Claude

1607QCAD (main)SuggestionVery LowIndent 'Spline Segments:' in explode preferencesAssigned
0%
1 Task Description

 FS#1604  was issued because of non-intuitive hierarchy of the preferences for the Explode function.
The task comment recieved explains the funcionallity in details not found elsewhere.

Indentation of the phrase ‘Spline Segments:’ suggest hierarchy.
Graying out the drop down box for the number of spline segments establish hierarchy.

1323QCAD (main)SuggestionLowImprove command line support in QCADAssigned
0%
Task Description

Hi,

As a typical command line draftsman (still using acad10 for dos, since microsoft doesn’t supoort Win NT anymore),
I noticed a severe lack on command line acces in QCAD.

For example I find the icon and pixel selecting methods within qcad very confusing and rude.

With the normal cad Select command I can select exactly what en how I want it.

I intend not to be rude, but I find my drawing screen littered all over with all kind of very specialist menu’s,
tools and options. Sorry, I just want to make a drawing at the natural intuitive way, as with a pencil.
So I use command line Commands, such as Move, Copy, Change, Select, a.s.o.
For a ‘Command scripting’ user (-batching is a different tool!-),
it seems to me logical these basic commands should be accessable.

1526QCAD (main)SuggestionLowExporting block attributes to CSVAssigned
0%
1 Task Description

Two useful commands make it necessary to

1-”delete all the history of the command lines without terminating QCad” ; and

2-”export attributes to the CSV file as exported to the Blocks List”

1368QCAD (main)SuggestionLowContext Menu - suggestionsAssigned
0%
1 Task Description

I love using the context menu, speeding up my workflow indeed.

I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!

Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?

What do you think?

1324QCAD/CAMSuggestionVery LowConfusing Copy / Move optionAssigned
0%
Task Description

Hi,

Using the Copy and Move command the [ ] Use current layer and attributes’ is confusing.

Perhaps [ ] change copy /moved set to current layers and attributes. is more suitable.

1469QCAD (main)SuggestionLowCartouche automatiqueAssigned
0%
1 Task Description

Would not it be possible to create a kind of template for printing?
We draw our room without cartridge. The cartridge will automatically appear when printed. The scaling could be automatic so that it goes in the A4 and therefore also will post the scale automatically. The name of the play could be the file name, date last saved after it the rest of the information that would be to add somehow (material index, designer, ...).

Original suggestion:

Bonjour,

Ne serait il pas possible de créer une sorte de template lors de l’impression ?
On dessine notre pièce sans cartouche. Le cartouche s’affiche automatiquement lors de son impression. La mise à l’échelle pourrais être automatique pour que ca rentre dans le A4 et donc l’échelle s’afficherai aussi en automatique. Le nom de la pièce pourrais être le nom du fichier, la date du dernier enregistrement après c’est le reste des infos qui serait à ajouter je ne sais comment (matière, indice, dessinateur, ...).

137QCAD (main)RefactoringLowSVG Export precisionAssigned
0%
Task Description

In files exported with the (even PG) exporter I sometimes see values like these: 334.99999999999994 or 570.0000000000001 and very often 12 digits of precision.

To safe on file size, I suggest, that QCAD rounds values on SVG export to eg. three places. When viewed in an ordinary web browser, that will result in a precision of 1 inch / 96dpi / 1000 = 0.00026mm, not? Ends should still meet.

1056QCAD (main)RefactoringVery LowDead and wrong code in RSPlatform.cppAssigned
0%
Task Description

I am considering pushing the following diff:

--- a/src/core/RSPlatform.cpp
+++ b/src/core/RSPlatform.cpp
@@ -205,25 +205,6 @@ int RS::getCpuCores() {
     cores = sysinfo.dwNumberOfProcessors;
 #elif defined(Q_OS_UNIX)
     cores = sysconf( _SC_NPROCESSORS_ONLN );
-#elif defined (Q_OS_MAC) || defined (Q_OS_BSD4) || [...]
-    nt mib[4];
-    size_t len;
-
-    /* set the mib for hw.ncpu */
-    mib[0] = CTL_HW;
-    mib[1] = HW_AVAILCPU; // alternatively, try HW_NCPU;
-
-    /* get the number of CPUs from the system */
-    sysctl(mib, 2, &cores, &len, NULL, 0);
-
-    if (cores < 1) {
-        mib[1] = HW_NCPU;
-        sysctl( mib, 2, &cores, &len, NULL, 0 );
-    }
-#elif defined(Q_OS_HPUX)
-    cores = mpctl(MPC_GETNUMSPUS, NULL, NULL);
-#elif defined(Q_OS_IRIX)
-    cores = sysconf( _SC_NPROC_ONLN );
 #endif

(truncated list to manage size)

I see that most of this was put in there as a kind of a note-to-self originally, however _SC_NPROCESSORS_ONLN is implemented by every realistically possible targets anyway, so for all practical purposes, this is dead weight.

A couple of questions remain, though:

  • #ifdef Q_OS_WIN32 should probably be Q_OS_WIN, so as to include win64 as well.
  • Assuming the real purpose for this function is to determine how many parts a particular task is to be split into in the future, if and when QCAD gets the need to split expensive tasks among multiple CPUS, “core” probably shouldn’t be static - CPUs are hot-pluggable today, and while one probably doesn’t do that on a laptop, it’s not unfeasible in, say, a VDI environment.

Thoughts?

728QCAD (main)Performance IssueLowSlow loading of drawing with many block insertsAssigned
0%
1 Task Description

Slow loading of drawing with huge number of block inserts (more than 10000).

288QCAD (main)Performance IssueLowopening dwg file takes very long [improved]Assigned
50%
Task Description

Opening a 4 MB dwg file results in no-response for about five minutes. Opening the same file with DraftSight takes less than five seconds.

1506dxflibFeature RequestLowwriteVPort parametersAssigned
0%
Task Description

Add parameters to the function DL_Dxf::writeVPort.
This way users will be able to specify the desired viewport.

Is the github the official repository? Are pull requests sent there accepted?

637QCAD (main)Feature RequestLowViewports / View ListAssigned
0%
Task Description

1. The Scrollbars for each window in the Viewports has the same size like the normal used scrollbars for windows. If you are working on a normal size Monitor it “steals” a lot of “working space”. Is there any possibility to make the scrollbars smaller or just a line to separate the windows so that I have to navigate with Keyboard and mouse?

2. I thing the Viewports and the View List belongs together - is it possible to get a button in the “View List / Tool Bar” to choose a Viewport style instead of “walking” the long way over the “Drawing preferences” Menu?

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=2071

1541QCAD (main)Feature RequestLowView > Zoom > Zoom In/Out: Make zoom factor configurabl...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

1596QCAD (main)Feature RequestLowView > Selection Filter: add filter for custom properti...Assigned
0%
Task Description

See also:
https://qcad.org/rsforum/viewtopic.php?f=32&t=4840

1133QCAD (main)Feature RequestLowView > Add View: save layer stateAssigned
0%
Task Description

Save layer state (visibility) with each added view object (optional?).

802QCAD (main)Feature RequestLowUser defined toolbarAssigned
0%
Task Description

It would be a nice feature to be able to define your own toolbar.

See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2393

618QCAD (main)Feature RequestLowuser defined lineweightAssigned
0%
2 Task Description

To have the option to set your own ‘user defined’ line weight.

694QCAD (main)Feature RequestMediumUser coordinate systems (UCS)Likely to be implemented
0%
5 Task Description

UCS support.

724QCAD (main)Feature RequestLowUseless reference point entering when moving relativelyAssigned
0%
Task Description

Hi,
this is a usability feature request:

If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.

It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).

Thx

827QCAD (main)Feature RequestLowUse Properties Editor to define Properties of newly cre...Assigned
0%
Task Description

If there is no selection the Properties Editor could be used to predefine the properties of to be drawn elements.

1131QCAD (main)Feature RequestLowUse different units for construction and dimensionsAssigned
0%
Task Description

E.g. use Millimeters for construction while dimensions are displayed in Meters.

821QCAD (main)Feature RequestLowUnderline text optionAssigned
0%
Task Description

Feature request - to have an option to underline text.

779QCAD (main)Feature RequestLowTurning detailed view on/offAssigned
0%
2 Task Description

My system: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz and 8 GB of RAM and NVIDIA GT218 (GeForce 210)

For a normal drawing displaying it in all detail is a good thing and the performance of my quad-core system is more than adequate.

But I discovered (or rather experienced) that when putting a large collection of individual drawings of gears onto one big sheet (960 mm x 600 mm - preparation for laser cutting), the performance was so bad that I had to wait several seconds (>10 sec) for each step in the process of arranging all the parts on the layer.

Request: It would be a big help and performance booster if you could disable the detailed view of each part/layer and only draw a rectangle to visualize the outline of the part.

Please take this in consideration. Attached you find an example of how that could look like. (Actually when pasting a drawing from the clipboard you already do that.)

784QCAD (main)Feature RequestLowTurn text into hatched polylinesAssigned
0%
2 Task Description

Would it be possible to add a feature which turns selected text into solid fill hatched polylines?

That would make it possible to migrate the drawing from one computer system to another without having to worry whether the used font is installed on both systems, like when sending a drawing to a manufacturer for laser engraving.

Right now I can do it by hand, letter by letter, and that is a rather labour-intensive task.

621QCAD (main)Feature RequestLowTrailing cutter correction similar to Modify - Chamfer ...Assigned
0%
Task Description

Trailing cutter correction for corners (see attached file).

‘Korrektur Schleppmesser-Offset’

589QCAD (main)Feature RequestLowTotal Length of selected entities komfortabler anzeigen...Assigned
0%
Task Description

Es wäre schön wenn die “Total Length of selected entities” etwas komfortabler angezeigt würde.

Ich arbeite meistens ohne “Command line”.
Benutze ich das “Info Tool” um die Total Length zu erhalten erhalte ich leider keinen Hinweis wo diese angezeigt wird.
Diese wird nur in der “Command line” angezeigt .... :-(

Zwei Lösungen könnte ich mir vorstellen:
1. Anzeige in der Zeichnung am Mauszeiger ...
2. Anzeige im Property Editor, Geometry, Length (dann natürlich Addiert) anstatt *VARIES*.

Die 2. Lösung halte ich persönlich als die elegante Variante da es eine logisch nachvollziehbare Aussage ist. Zudem erspart es einige Mausklicks auf dem Weg zum Infotool um die gewünschte Info zu bekommen.

Bemaßungen sollten, wenn sie nicht aufgelöst sind, ignoriert werden.

1594QCAD (main)Feature RequestLowTool matrix: allow reordering of toolsAssigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923

884QCAD (main)Feature RequestLowTool for copying/pasting selected entities along a pathAssigned
0%
Task Description

Not sure how complicated this one might be to develop/implement ?

But a tool for copying/pasting entities along a given path would be great. In the attached snapshot you can see what I am trying to acheive - to copy/paste the brick along a wall contour. A dedicated tool for doing something like this would be great...sure I can do it with the tools provided in QCAD already but it sure would make life so much easier if there was a tool specific for this kind of thing.
I am actually working on some ‘real’work projects with these requirements and it does take a bit of time to get correct!

Or maybe an additional Points tool option to plant points along a curve would be good!

596QCAD (main)Feature RequestLowTool "Lengthen" mit "Total" erweitern oder ....Assigned
0%
Task Description

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel ;-)

708QCAD (main)Feature RequestLowTo re-introduce Tile and Cascade window optionsAssigned
0%
2 Task Description

To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.

674QCAD (main)Feature RequestLowTo add optional 'auto' dimension tracking feature.Assigned
0%
Task Description

It might be useful for some to have the option to turn on/off ' auto’ dimension tracking option.

See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=2&p=6893#p6893

516QCAD (main)Feature RequestLowTo add option to 'print only' selected area.Assigned
0%
2 Task Description

To add the option to ‘print only’ selected area in a drawing.

649QCAD (main)Feature RequestLowTo add an Array option.Assigned
0%
Task Description

To re-introduce an ‘Array’ option with Number of columns/rows and Column/row spacing.

This option could be added to the Modify tool set so - could be used with all entities, not only blocks!

Wieder einzuführen Ein ‘Array’ Option mit Anzahl der Spalten / Zeilen und Spalten / Zeilen Abstand.

Diese Option könnte der Modify Tool so eingestellt, hinzugefügt werden - konnte mit allen Stellen, nicht nur Blöcke verwendet werden!

*Please see topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&p=6627&sid=1600f95e02d3121574a4d60ce019e16a#p6627

1128QCAD (main)Feature RequestLowText: automatically wrap text at text box widthAssigned
0%
1 Task Description

Add support for automatic text line wrapping for multiline text entities.

979QCAD (main)Feature RequestLowText dialog: insert special characters in simple text m...Assigned
0%
Task Description

The Omega button to insert special characters is only available in rich text mode.
Make it available in simple text mode as well.

1233QCAD (main)Feature RequestLowTab key to cycle between selected objectsAssigned
0%
Task Description

I think it’s a useful adition and makes it easy to select objects that are overlapped. I know there is a selection filter, but sometimes this is faster and/or all the objects share the same type and such things.

If I remember correctly, Inkscape has this behaviour.

Thanks.

208QCAD (main)Feature RequestLowSVG export: support custom line weightsAssigned
0%
Task Description

Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594

598QCAD (main)Feature RequestLowSupport tangents between ellipsesAssigned
0%
1 Task Description

To add support for drawing tangents between ellipses.

See topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003

1094QCAD (main)Feature RequestLowSupport OS X 10.9.x (Maverick) Full Screen PatternAssigned
0%
Task Description

It would be nice if the OS X Pro version could support the standard OS X full screen pattern in the same way as native OS X applications.

With this I mean that applications in full screen will create a temporary new desktop as long as they are in full screen mode.

1098QCAD (main)Feature RequestLowSupport for set of layersAssigned
0%
Task Description

Many constructions refer to a basis of elements, which stay constant in all follow-ups. As an example there is a floorplan and I would like to create different variations of room layout (e.g. A and B). In my example the basis consists of 30 layers an each variation needs 10 further ones. At last there are 50 different layers in my drawing. Designing layout A needs layer 1 to 30 (basis) and 31 to 40 (A) to be shown, but 41 to 50 (B) must be invisible. Now I modify Var.B which makes me to single click the visibility of 31 to 40 (A) to be not shown and 41 to 50 (B) to be shown. You’ve got it?

It would be great help, to save the set of all shown layers by an individual name in a pulldown-menu. Visibility of my variations could be chosen by userdefined “set of layers”, e.g. “Var-A”, “Var-B” and “Var-A_but_different”. In this way I pick just one set-name in my pulldown-list instead of marking and demarking between countless layers.

In my opinion this tool would be a small aspect in QCad but a giant leap for user-pleasentness ;-)

693QCAD (main)Feature RequestMediumSupport for external references (XREF)Likely to be implemented
0%
13 Task Description

Support for external references (XREF)

1034QCAD (main)Feature RequestLowSupplementary note added to Application preferences dia...Assigned
0%
Task Description

I think it would be useful to add a note to the Application preferences dialog window, to explain to the user the difference between ‘Application and Drawing’ preferences and how it effects drawings in QCAD.

Please see topic for more details and feedback:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2831&p=9724#p9724

1126QCAD (main)Feature RequestLowSuggestion for Dimension Location settingAssigned
0%
3 Task Description

Please seet topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124

1407QCAD (main)Feature RequestLowSplines: add support for knot weights, start-, end tang...Assigned
0%
Task Description

Attached DWG/DXF files are incorrectly read by QCAD.
They contain splines drawn using ZWCAD and saved as DWG/DXF version 2000.
Above splines are polylines created with autolisp routine which converts spline to polyline, so you can see how splines should actually be drawn.

First spline is created with fit points: 2,2 4,4 6,2
Then copied and applied weight of 2 on central control point.
Then copied again and applied weight of 0.5 on central control point.

Second spline is created with fit points: 6,2 8,4 10,2 with vertical start and end tangent.
Then copied and applied fit tolerance of 1 for fit points.

Third spline is created with fit points: 10,2 12,4 14,2 with horizontal start and end tangent.

Fourth and fifth spline are correctly drawn by QCAD.

Link to bitmap (converted to png) export:
External Link

Versions
QCAD version: 3.13.1.0
Date: Mar 17 2016
Qt version: 4.8.4
Compiler version: gcc 4.4.3
Build Date: Mar 17 2016
Revision:
Architecture: x86_64
OS: Linux
OS version: Unknown

1107QCAD (main)Feature RequestLowSplines: add / remove control points of existing spline...Assigned
0%
Task Description

Tools to add control points to existing splines and remove control points.

1428QCAD (main)Feature RequestLowSnap middle of the minimum distance between two entity'...Assigned
0%
5 Task Description

Hi,

from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.

Pic 1: Given situation
Pic 2: Result after using this new snap tool

Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?

Showing tasks 1 - 50 of 374 Page 1 of 81 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing