QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

ID  descCategoryTask TypeSeveritySummaryStatusProgress
 2349 QCAD (main)Feature RequestLow Imperial drawings doesn't accept imperial scales for Vi ...Closed
100%
Task Description

Drawing inch / imperial

If I add a Viewport imperial scales for that Viewport like 1” = 32’ are not accepted. Accepted are only metric scales like 1/100.

Please see also:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=9206

2348QCAD (main)Bug ReportLowtext in simple format do not save position after save t...Assigned
0%
1 Task Description

How to reproduce the bug:
1-open a new file
2-select text tool, simple text(one line,no formatting) and alignment in base-left
3-write some text in somewhere position in the draw, repeat this in others positions
4-save the file in .dxf R15 [2000/LT2000] (dxflib) format
5-close Qcad
6-open the saved file, the writhed text lose original position and now all the text have 0,0 position

2347QCAD (main)Bug ReportLowModify / Clip to rectangle issueAssigned
0%
1 Task Description

The tool “Clip to rectangle” / “Cut at Area Boundary” tool used on an area with lines and arcs will partly complete arcs to circles.

 2346 QCAD (main)Bug ReportLow Access to Command: Line by pressing space bar Closed
100%
Task Description

On the current version of QCAD (used on a M1 MacBook Pro) you can set a keyboard shortcut timeout which I have set to 5000, 5seconds is ok to press two keys and press return. However I find this this method of selecting the command line is not consistent, its selection time varies from approx 0.5sec up to 5sec which leads to incorrect command selection.

To get around this at preset I use a mouse click to select the command line which works every time.

An option not to use the keyboard time would be better so the space bar selects command line, return key executes and closes or Esc cancels and closes selection

Hope you can look into this
Regards Paul

 2345 QCAD (main)Bug ReportLow File > Print: printing multiple copies prints too many  ...Closed
100%
Task Description

File > Print
Set copies to 2
4 sheets are printed.

 2344 QCAD (main)Bug ReportLow Draw > Polyline > Polyline along Segments: Crash on can ...Closed
100%
1 Task Description

Throws me out of QCad consistently:

1. Have a polyline selected.
2. Click partial polyline along selection and click the first point on the polyline.
3. Hit escape key or similar to exit the tool.

 2343 QCAD (main)Bug ReportLow Modify > Projection: Dimension entities offset Closed
100%
Task Description

Reference point not taken into account when projecting dimension entities.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9117

 2342 QCAD (main)Bug ReportLow Layer > Edit Layer: Changing Color of Invisible Layer Closed
100%
Task Description

Steps to reproduce:
1. Create a new layer with color (e.g.) red.
2. Draw a line.
3. Make the layer invisible.
4. Edit the layer to change its color to (e.g.) green.
5. Make the layer visible.
The line will appear colored red.
If you save, close, and reopen the file, it will now appear green.

2341QCAD (main)Feature RequestLowmanage image referencesAssigned
0%
1 Task Description

QCAD. ver. 3.27.1.0 (3.27.1)
Qt version: 5.13.2
Architecture: x86_64
OS Windows 11

It might be useful to have the possibility to manage the references of the images contained within the drawing. A design could use recurring images, stored in a folder outside the one in which the design is located. Moving the drawing or folders (or changing the PC) will lose the folder references and the images are not displayed when the drawing is opened again.
I imagine the possibility to view the references of the images (and if necessary modify manually or with a pointer) with the option of: attach, detach, reload, etc., as in the example below (referred to ActCad - based on Intellicad technology)

2340QCAD (main)Feature RequestLowLayer List / Block List: Link minus icon to keyboard de...Assigned
0%
Task Description

Referring to Layer List / Block List: It would improve the workflow if the Delete key on the keyboard would be linked to the minus icon (Delete). The command ER is also ignored in both list.

2339QCAD (main)Feature RequestLowBlock List multible selectionAssigned
0%
Task Description

It would be nice to have the possibility to select multiple blocks with Shift and/or CTRL + mouse like the Layer List to use a delete etc command on all selected blocks at once.

2338QCAD (main)Feature RequestLowShow non-QCAD custom XDATA optionallyAssigned
0%
1 Task Description

QCAD (before version 3.27?) used to show some custom XDATA, e.g. tag 1000, even for application names that are not “QCAD”, which for me was useful, so it’s somewhat of a regression. (I think it was broken when selecting multiple items, maybe that’s why it was removed.)

I suggest to bring that feature back, but maybe show it only when a single element is selected if that’s easier.

(As a workaround/hack I guess it would be possible to rewrite the required information as QCAD compatible XDATA externally I guess.)

2337QCAD (main)Feature RequestLowDistance information should be available in 2D and 3DAssigned
0%
Task Description

As per https://qcad.org/rsforum/viewtopic.php?f=32&t=9089, I suggest to extend the distance information tools:

* show Delta Z (at least when any of the elements has Z information)
* allow switching between 2D and 3D distance
* maybe allow to show both
* maybe change the text to distinguish between them (”Distance” → “Distance 2D/3D”)

2336QCAD (main)Feature RequestLowAdd command to go back to previous nested blockAssigned
0%
Task Description

“em” just always goes back to the main drawing. But for nested blocks, when jumping from edit mode of one block to the next nested block, it would be helpful to have some “ep” to go back to the previous block.

This was discussed at the forums...

 2335 QCAD (main)Bug ReportLow Rendering solid hatches in scaled blocks Closed
100%
Task Description

Andrew,
presumed not to be OS/version depending.

Referring to topic: https://qcad.org/rsforum/viewtopic.php?f=33&t=9073.
An issue that has similarities with several topics,
and some bug reports (closed or still open).

Solid hatches in blocks that are scaled up seems to be crippled.
Very pronounced with arcs in the boundary.
I suspect that the arc interpolation isn’t scaled along with the Block Reference scale.

Another issue exists for patterned hatches in blocks.
I suspect that the hatch origin is kept as defined in the block. Applying the block reference insertion point and at scale as an offset to the hatch origin while rendering would:
- hatch the inserted block exactly the same as it is created in the block.
- reduce lagging and increase pattern accuracy/coherency there the hatch origin is at the same distance to the hatch as it is in the block.
I know this doesn’t solves anything when the block is created from entities and the hatch origin wasn’t close to the hatch itself.

Regards,
CVH

 2334 QCAD (main)Bug ReportLow Modify > Break Out Segment: Line Selection Mode fails o ...Closed
100%
Task Description

no task description

 2333 QCAD (main)Bug ReportLow Ordinate dimensions: scale option ignored Closed
100%
Task Description

Hello,
I’m having issues with ordinate dimensions on a DXF file that is not scale 1:1.

Running on Windows 10
Qcad/Cam Pro V 3.27.1.0

Here is my scenario;

Step 1; Import CAD file “ScaleTest1142022.DXF” which is scaled at 1:2 from the previous software (Solidworks).
Step 2; Clean up file, scale up to 1:1 and move to XY zero.
Step 3; Add horizontal or vertical dimensions, they are correct. If I do ordinate dimensions, they are double of what they should be.
Outside of block is 1.0” x 6.0”, but ordinates come up as 2.0” x 12.0” When adding ordinate dimensions, there is a scale dropdown option, changing this seems to have no effect on anything.
Going into drawing preferences, Dimension settings, the size scale factor is 1.

On these dimensions, the linear measurement factor is set to 2, and the dimension displayed is not double what it really should be. All other horizontal and vertical dimensions added have the linear measurement factor set to 1 and the dimensions are correct.

Is there a way to force the “LMF” to 1 always?

 2332 QCAD (main)Feature RequestLow Hatch Sources Closed
100%
Task Description

As we know it is easy to copy our own hatches (.pat) to QCAD but unfortunately with every QCAD update I’ve to move those files to a new location.

This said - it would be nice to have the possibility to tell QCAD the source for such customized hatch collection. Similar to the “Library Source” feature for the Library Browser.

2331QCAD/CAMFeature RequestLowTabs: Control over on which particular profile used.Assigned
0%
Task Description

Currently if I position one Tab (KT) to stacked profiles QCADCAM will use it on ALL in Z matching profiles. Practically in most cases would be to use tabs only on the lowest profile.

It would be nice to have some kind of control on which profile a tab has to be used.

2330QCAD/CAMFeature RequestLowToolpath optimization optional (on/off)Assigned
0%
2 Task Description

Please refer to: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=9033

 2329 QCAD (main)Bug ReportLow Viewport: arcs in scaled viewports are not rendered cor ...Closed
100%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=9025

2328QCAD (main)Bug ReportVery Lowdrop down, using keyboardAssigned
0%
Task Description

Minor issue!
When using keyboard to initiate the dropdown menus.
I noticed the ALT “D” does not cycle through the headings Draw & Dimension in the same way.
ALT “M” cycles though Modify & Misc or ALT “S” cycles though Select & Snap.
User Name: StanTibbs
E-mail: [email protected]

 2327 QCAD (main)Bug ReportLow Spam Closed
100%
Task Description

Spam

 2326 QCAD (main)Bug ReportLow Library item - Long distance between cursor and object Closed
100%
Task Description

Please see the reported issue below:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=8994&p=35889#p35889

The library items is designed only with hatches. Inserted within the Library Browser will lead to a wildly displaced reference point position. The then in the drawing available block inserted again from the Block List will show the original correct reference.

On the other hand - Library Items designed with common entities like circle, line etc. behave in both cases normal as expected.

2325QCAD (main)Bug ReportLowdwg file crashes QCADAssigned
0%
Task Description

Regarding to forum post:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8982&p=35836#p35836

dwg loaded in 3.27.1 frees QCAD (no response) and a Win10 PC. Same drawing loaded in 3.26.0 causes no problems. It looks to me that two hatches (handle 198b6, 198ba) are the culprits.
Drawing saved without those hatches opens without any problem in 3.27.1.

TECNOFLEX symbol library.dwg = original file from forum post
TECNOFLEX symbol library_mod.dwg = my modification

 2324 dwg2csvBug ReportLow dwg2csv: exception when listing properties (-l) Closed
100%
Task Description

dwg2csv -l

Exception when trying to list properties for RDwgStyle

 2323 QCAD (main)Bug ReportLow editing causes zero length entities Closed
100%
Task Description

Exploded a simple text A into polylines. exploded polylines into lines and arcs. modified by using trim and break out segment. result makes a bunch of zero length entities. can be found and eliminated by using detect zero length, but casual user just see a bunch of errors in the dxf r21 file.
0
ARC

5

59
330
4CA
100
AcDbEntity

8

hatch

6

Continuous
62

   7

100
AcDbCircle
10
5.403666619400000E+98
20
8.414296587700000E+98
30
0.0
40
1.000000000000000E+99
100
AcDbArc
50
237.2913973989
51
237.2913973989

as you can see the coordinates are wacko and start and end angles are the same.

 2322 QCAD (main)Bug ReportLow Edit > Convert Drawing Unit: dimension problem Closed
100%
Task Description

If I convert to an other unit it will only change the unit name - no dim (Existing or new) is calculated regarding to the new unit.

 2321 QCAD (main)Bug ReportLow dwg2svg: dots in hatch patterns not visible in SVG outp ...Closed
100%
Task Description

Possibly related to  FS#2309 

 2320 QCAD (main)Bug ReportLow Viewport: text misplaced if viewport is set to not plot ...Closed
100%
Task Description

When toggling the plotability of the viewport layer, the Arial fonts inside the viewport when viewing the paperspace disappear or move when plotability is turned off. This does not occur for the CAD Standard font, and it does not happen with text that is not brought in via a viewport, such as from a block or added directly into paperspace. I have attached a DXF and a video file that shows the odd behavior.

I am using QCAD 3.27.0 and Win10 Pro.

 2319 QCAD (main)Bug ReportLow Status Bar disabled at startup Closed
100%
Task Description

Please refer to topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8921

- Launch QCAD-Pro 3.26.4.13, Status Bar is off by default
- Set menu View > Status Bar on
- The Status Bar is showed but the menu options remains unchecked
- Quit QCAD-Pro
- At launch QCAD-Pro opens with the Status Bar toggled off
- Set View > Status Bar on (or issue GS from command line)
- At the next launch the Status Bar is off

Note: the preference StatusBar in the .ini file has the value “false” when it should be “true”. Changing the value manually to “true” makes the Status Bar appear just for the next launch of QCAD then the preference is reset to “false” by QCAD.

- Deleted the .ini file, same behavior
- Changed user, same behavior
- Tried on MacOS 10.11.6 (El Capitan), same behavior

QCAD Professional

Version: 3.26.4.13 (3.26.4.13)
Internet: QCAD.org
Build Date: Nov 18 2021
Revision: fbb9f37
Qt Version: 5.10.1
Architecture: x86_64
Compiler: Clang 8.0.0

Riepilogo hardware:

Nome modello: iMac
Identificatore modello: iMac12,1
Nome processore: Intel Core i5
Velocità processore: 2,5 GHz Numero di processori: 1
Numero totale di Core: 4
Cache L2 (per Core): 256 KB
Cache L3: 6 MB Memoria: 16 GB Versione Boot ROM: 87.0.0.0.0
Versione SMC (sistema): 1.71f22

 2318 QCAD (main)Bug ReportLow Restore open files not working Closed
100%
Task Description

Please refer to topic https://www.qcad.org/rsforum/viewtopic.php?f=33&t=8902

- Upgraded from QCAD-Pro 3.22.1.0 to 3.26.4.13 (snapshot)
- Launch QCAD-Pro and set Restore open files preference ON
- Create a new test drawing and save without closing it
- Quit QCAD-Pro
- Launch QCAD-Pro, it opens with an empty drawing

- Deleted the .ini file, same behavior
- Changed user, same behavior
- Tried on MacOS 10.11.6 (El Capitan), same behavior

QCAD Professional

Version: 3.26.4.13 (3.26.4.13)
Internet: QCAD.org
Build Date: Nov 18 2021
Revision: fbb9f37
Qt Version: 5.10.1
Architecture: x86_64
Compiler: Clang 8.0.0

Riepilogo hardware:

Nome modello:	iMac
Identificatore modello:	iMac12,1
Nome processore:	Intel Core i5
Velocità processore:	2,5 GHz
Numero di processori:	1
Numero totale di Core:	4
Cache L2 (per Core):	256 KB
Cache L3:	6 MB
Memoria:	16 GB
Versione Boot ROM:	87.0.0.0.0
Versione SMC (sistema):	1.71f22
 2317 QCAD (main)Bug ReportLow Crash / lag when selecting splines with clamped knots ( ...Closed
100%
Task Description

OpenDesign bug (endless loop or very long delay) in OdDbSpline::getDistAtParam.

2316QCAD (main)Feature RequestLowModify > Detect Duplicates: implement for infinite line...Assigned
0%
1 Task Description

Headline should already explain the issue ... ;-)

2315QCAD Community EditionBug ReportLowCrash after ~10-th times move Spline nodesAssigned
0%
Task Description

1. Create spline
2. Move spline nodes. After ~10 times move qcad is crashed with backtrace:
Thread 9 “Thread (pooled)” received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fff56dc9640 (LWP 8224)]
0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848) at /usr/include/qt5/QtCore/qlist.h:492
492 current→v = new T(*reinterpret_cast<T*>(src→v));
(gdb) bt
#0 0x00007ffff66fabf2 in QList<QSharedPointer<RShape> >::node_copy (this=<optimized out>, src=0x55537c59e758, to=0x555557f66408, from=0x55537cfdc848)

  at /usr/include/qt5/QtCore/qlist.h:492

#1 QList<QSharedPointer<RShape> >::detach_helper (alloc=<optimized out>, this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:835
#2 QList<QSharedPointer<RShape> >::detach_helper (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:849
#3 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178
#4 QList<QSharedPointer<RShape> >::detach (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:178
#5 0x00007ffff686182a in QList<QSharedPointer<RShape> >::end (this=<optimized out>, this=<optimized out>) at /usr/include/qt5/QtCore/qlist.h:342
#6 QList<QSharedPointer<RShape> >::last (this=0×555557311620) at /usr/include/qt5/QtCore/qlist.h:364
#7 RSpline::appendToExploded (this=0×555557311510, line=...) at math/RSpline.cpp:964
#8 0x00007ffff6867059 in RSpline::getExploded (this=0×555557311510, segments=1457293328) at math/RSpline.cpp:919
#9 0x00007ffff686682a in RSpline::getLength (this=this@entry=0×555557311510) at math/RSpline.cpp:1026
#10 0x00007ffff6c11490 in RSplineData::getLength (this=<optimized out>, this=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineData.h:178
#11 RSplineEntity::getProperty (this=0x5555573114a0, propertyTypeId=..., humanReadable=<optimized out>, noAttributes=<optimized out>,

  showOnRequest=<optimized out>) at /usr/src/debug/qcad-3.27.0.0/src/entity/RSplineEntity.cpp:253

#12 0x00007ffff67cc214 in RPropertyEditor::computePropertyValue (ccProp=...) at /usr/src/debug/qcad-3.27.0.0/src/core/RPropertyEditor.cpp:574
#13 0x00007ffff67d298f in QtConcurrent::FunctionWrapper1<void, RProperty&>::operator() (u=..., this=0x555557757f18)

  at /usr/include/qt5/QtConcurrent/qtconcurrentfunctionwrappers.h:80

#14 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIteration (it=..., this=0x555557757ee0)

  at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:68

#15 QtConcurrent::MapKernel<QList<RProperty>::iterator, QtConcurrent::FunctionWrapper1<void, RProperty&> >::runIterations (this=0x555557757ee0,

  sequenceBeginIterator=..., beginIndex=<optimized out>, endIndex=15) at /usr/include/qt5/QtConcurrent/qtconcurrentmapkernel.h:77

#16 0x00007ffff67d2c9d in QtConcurrent::IterateKernel<QList<RProperty>::iterator, void>::forThreadFunction (this=0x555557757ee0)

  at /usr/include/qt5/QtConcurrent/qtconcurrentiteratekernel.h:255

#17 0x00007ffff44b5b2d in QtConcurrent::ThreadEngineBase::run (this=0x555557757f20) at qtconcurrentthreadengine.cpp:302
#18 0x00007ffff59c8d52 in QThreadPoolThread::run (this=0x555556198b10) at thread/qthreadpool.cpp:100
#19 0x00007ffff59c5a61 in QThreadPrivate::start (arg=0x555556198b10) at thread/qthread_unix.cpp:329
#20 0x00007ffff546c717 in start_thread (arg=<optimized out>) at pthread_create.c:435
#21 0x00007ffff54f018c in clone3 () from /lib64/libc.so.6
(

 2314 QCAD (main)Bug ReportLow Combobox Width too Small When Using Themes Closed
100%
Task Description

Hi Andrew

The Pre-Installed & User Generated Themes Affect Some Comboboxes
Others May Also be Affected But I’ve Only Noticed These Recently..
They Appear to be OK with Default & Dark Themes Though..

Cheers
John

QCAD/CAM
Version: 3.26.4 “File:Autosave”

Version: 3.26.4.13 snapshot “Widgets:Property Editor & File:Autosave”
Build Date: Nov 18 2021
Revision: fbb9f37
Qt Version: 5.8.0
Architecture: x86_64
Compiler: gcc 4.8.1

 2313 QCAD Community EditionBug ReportLow qcad-3.26.4.14. build error due to missing qt project f ...Closed
100%
Task Description

cd ../qcad-3.26.4.14.tar.gz/ && ( test -e Makefile || /usr/lib/qt5/bin/qmake -o Makefile /home/li/下载/qcad-3.26.4.14.tar.gz/qcad-3.26.4.14.tar.gz.pro CONFIG+=ractivated ) && make -f Makefile debug
Cannot find file: /home/li/下载/qcad-3.26.4.14.tar.gz/qcad-3.26.4.14.tar.gz.pro.
make: *** [Makefile:308:sub—-qcad-3-26-4-14-tar-gz-debug_ordered] 错误 2

 2312 QCAD Community EditionBug ReportLow Draw from CSV can not create Layers with NewLayer Closed
100%
Task Description

NewLayer always complains about a missing parent layer.

I could not figure out how to create Layers from a CSV file,
I tried DrawCSV_Layer_test.csv which is a reference test from the qcad repo but NewLayer always returns “Parent layer doesn’t exist.”

Reading from file: /home/zem/DrawCSV_Layer_test.csv
Switched to semicolon/comma CSV style.
Layer doesn't exist, ignored. Text line 20 layer: 0 Entity Colors
Not a correct layer name. Text line 24 name: Invalid=`name`
Add/Update layer ignored.
Not a correct color. Text line 25 color: ByBlock
Add/Update layer ignored.
Not a correct Lineweight. Text line 26 weight: 999
Add/Update layer ignored.
Not a correct Linetype. Text line 27 type: Orange line
Add/Update layer ignored.
Parent layer doesn't exist. Text line 31 layer: MyLayerInvalid paren
Add/Update layer ignored.
Can not hide layer, ignored. Text line 34 layer: Invalid Hide
Can not freeze layer, ignored. Text line 35 layer: Invalid FreezeInvalid SUB
Can not lock layer, ignored. Text line 36 layer: Invalid Lock
Can not lock layer, ignored. Text line 37 layer: Invalid=`name`
Can not allow layer, ignored. Text line 38 layer: Invalid Allow
Can not switch to layer, ignored. Text line 39 layer: Invalid layer switch
Can not switch to layer, ignored. Text line 40 layer: Invalid=`name`
Parent layer doesn't exist. Text line 43 layer: 01 Gree
Add/Update layer ignored.
Parent layer doesn't exist. Text line 44 layer: 02 Parent
Add/Update layer ignored.
Parent layer doesn't exist. Text line 45 layer: 02 Parent1Sub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 46 layer: 02 Parent1Sub1SubSub1 
Add/Update layer ignored.
Parent layer doesn't exist. Text line 47 layer: 03 Parent
Add/Update layer ignored.
Parent layer doesn't exist. Text line 48 layer: 03 Parent2Sub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 49 layer: 03 Parent2Sub2SubSub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 50 layer: 04 Parent
Add/Update layer ignored.
Parent layer doesn't exist. Text line 51 layer: 04 Parent3Sub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 52 layer: 04 Parent3Sub3SubSub
Add/Update layer ignored.
Parent layer doesn't exist. Text line 53 layer: Last New &Curren
Add/Update layer ignored.
Can not hide layer, ignored. Text line 56 layer: 03 Parent2
Can not freeze layer, ignored. Text line 57 layer: 03 Parent2Sub2
Can not lock layer, ignored. Text line 58 layer: 03 Parent2Sub2SubSub2
Can not hide layer, ignored. Text line 60 layer: 04 Parent3
Can not freeze layer, ignored. Text line 61 layer: 04 Parent3
Can not lock layer, ignored. Text line 62 layer: 04 Parent3
Can not hide layer, ignored. Text line 63 layer: 04 Parent3Sub3
Can not freeze layer, ignored. Text line 64 layer: 04 Parent3Sub3
Can not lock layer, ignored. Text line 65 layer: 04 Parent3Sub3
Can not hide layer, ignored. Text line 66 layer: 04 Parent3Sub3SubSub3
Can not freeze layer, ignored. Text line 67 layer: 04 Parent3Sub3SubSub3
Can not lock layer, ignored. Text line 68 layer: 04 Parent3Sub3SubSub3
Can not allow layer, ignored. Text line 70 layer: 04 Parent3
Can not switch to layer, ignored. Text line 76 layer: 02 Parent1Sub1SubSub1 %
Layer doesn't exist, ignored. Text line 82 layer: 02 Parent1
Can not switch to layer, ignored. Text line 85 layer: 02 Parent1Sub1SubSub1 %
Casted entries : 4 with 90 text lines
Importing CSV complete. Command ended.

No layers are added in the resulting drawing.

OS here is fedora 34 and qcad is either from fedora or rpmfusion.

 2311 ECMAScriptBug ReportLow Odd self-intersection point for spline shapes Closed
100%
Task Description

Andrew,

Encountered with snapshot 3.26.4.9
On both a 32bit win7 and a Linux machine.
But probably not related to version nor OS.

The calculated area centroid position for a self-intersecting shape is invalid.
Therefor polylines and splines are checked for their self intersection nature.
Polylines with line segments require a tolerance of 1e-6.
For polylines with arc segments there is no easy to formulate value.
Reverted to something less strict than the arc connect tolerance: 1.1e-3
Refer to: https://www.qcad.org/rsforum/viewtopic.php?f=30&t=8526&p=34056#p33694

RSpline.getSelfIntersectionPoints() has no tolerance value.

Some perfect valid spline shapes fail this test.
Not related to the XP spline approx tolerance preference.
Related to orientation, try the failing shape when reversed in situ.
Related to their position in the plane, see translated examples.

Reproducible with control point splines.
Reproducible when rotating the shape.
Such failing closed splines can be hatched and an area centroid is returned.

Regards,
CVH

PS: Got a notice posting this:
“Notice: Trying to access array offset on value of type bool in /home/qcadch/public_html/bugtracker/scripts/details.php on line 222”

 2310 QCAD (main)Bug ReportLow File > Print: Number of copies and page range ignored Closed
100%
Task Description

When try partly print multipage , all pages will be printed.
in my this project i reserved 5*10 =50 pages, but so far have made less than 10 ready, which I wanted print out, it always start print all 50 pages, no matter How i try choose.

 2309 QCAD (main)Bug ReportLow SVG Export - hatch patterns with dots not visible Closed
100%
Task Description

Points in hatch patterns are exported as empty path elements in the exported SVG.
Therefore, the hatch patterns “DOTS” and “AR-SAND” are not visible in the exported SVG.

2308QCAD (main)Feature RequestLowViewport Scale FieldAssigned
0%
Task Description

It would be helpful if the scale field that appears while placing a viewport would also re-appear when the viewport is selected after it’s already been placed in the layout. It would also be helpful if the pre-populated values in the dropdown matched those in the global layout scale field.

2307QCAD/CAMFeature RequestLowTools to create dogbones or corner overcut Assigned
0%
2 Task Description

The inside corners of profile tool paths have rounded inside corners. This occurs because the rounded outside the bit cannot make it all the way into the corner of the feature. Think of tracing the inside wall of a cardboard box with a can of soup. The can makes direct contact with the box walls, but its
round shape is unable to completely fit into the tight corners— there’s always a gap.

In a dog-bone overcut (see the figure in attachment), the inside profile corner is enlarged into a semicircle, allowing the sharp edges of the mating piece to slide through without interference.

When a dog bone is applied to the inside corners, as shown in the second figure in the attachment, the joints fit together nicely!

The following website explains what should be implemented More elegant CNC dogbones

There are two ways to implement this tool. Either you modify the original design (as implemented in Fusion 360) or you can do it at the moment you define the tool path (Estlcam allows you to do this for example). See the feature Corner overcut, on Estlcam website

 2306 QCAD (main)Bug ReportLow Keyboard setting is incorrect Closed
100%
Task Description

I am using QCAD/CAM version. Since I installed this version of QCAD that I bought recently, I have a problem with the keyboard settings. On the QCAD application, the keyboard is set to English, while it is set as Swiss French on the system level.

System: Host: manjaro Kernel: 5.10.70-1-MANJARO x86_64 bits: 64 Desktop: GNOME 40.5 Distro: Manjaro Linux
Machine: Type: Laptop System: Hewlett-Packard product: HP EliteBook 8470p v: A1009D12 serial: <superuser required>

         Mobo: Hewlett-Packard model: 179B v: KBC Version 42.38 serial: <superuser required> BIOS: Hewlett-Packard
         v: 68ICF Ver. F.65 date: 08/11/2016

Battery: ID-1: BAT0 charge: 40.1 Wh (100.0%) condition: 40.1/40.1 Wh (100.0%)
CPU: Info: Dual Core model: Intel Core i5-3320M bits: 64 type: MT MCP cache: L2: 3 MiB

         Speed: 1261 MHz min/max: 1200/3300 MHz Core speeds (MHz): 1: 1261 2: 1215 3: 1533 4: 1201

Graphics: Device-1: Intel 3rd Gen Core processor Graphics driver: i915 v: kernel

         Device-2: Primax HP HD Webcam [Fixed] type: USB driver: uvcvideo
         Display: wayland server: X.Org 1.21.1.2 driver: loaded: modesetting resolution: 1: 1366x768~60Hz 2: 2560x1440~60Hz
         OpenGL: renderer: Mesa DRI Intel HD Graphics 4000 (IVB GT2) v: 4.2 Mesa 21.2.3

Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio driver: snd_hda_intel

         Sound Server-1: ALSA v: k5.10.70-1-MANJARO running: yes
         Sound Server-2: PulseAudio v: 15.0 running: yes

Network: Device-1: Intel 82579LM Gigabit Network driver: e1000e

         IF: enp0s25 state: up speed: 1000 Mbps duplex: full mac: a0:b3:cc:22:b0:bf
         Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi
         IF: wlo1 state: up mac: 8c:70:5a:6b:30:10

Bluetooth: Device-1: Broadcom HP Portable SoftSailing type: USB driver: btusb

         Report: rfkill ID: hci0 state: up address: see --recommends

Drives: Local Storage: total: 238.47 GiB used: 103.47 GiB (43.4%)

         ID-1: /dev/sda vendor: Samsung model: SSD 840 PRO Series size: 238.47 GiB

Partition: ID-1: / size: 233.72 GiB used: 103.47 GiB (44.3%) fs: ext4 dev: /dev/sda1
Swap: Alert: No swap data was found.
Sensors: System Temperatures: cpu: 40.0 C mobo: 0.0 C

         Fan Speeds (RPM): N/A

Info: Processes: 234 Uptime: 2h 42m Memory: 7.64 GiB used: 3.95 GiB (51.8%) Shell: Zsh inxi: 3.3.08

locale
LANG=en_US.utf8
LC_CTYPE=”en_US.utf8” LC_NUMERIC=”en_US.utf8” LC_TIME=”en_US.utf8” LC_COLLATE=”en_US.utf8” LC_MONETARY=”en_US.utf8” LC_MESSAGES=”en_US.utf8” LC_PAPER=”en_US.utf8” LC_NAME=”en_US.utf8” LC_ADDRESS=”en_US.utf8” LC_TELEPHONE=”en_US.utf8” LC_MEASUREMENT=”en_US.utf8” LC_IDENTIFICATION=”en_US.utf8” LC_ALL=

localectl status

 System Locale: LANG=fr_CH.UTF-8
     VC Keymap: fr_CH
    X11 Layout: ch
     X11 Model: pc105
   X11 Variant: fr
 2305 QCAD (main)Bug ReportLow Invisible XLine under visible XLine may prevent selecti ...Closed
100%
Task Description

To reproduce:

1. File – New
2. Create a new layer (layer 1)
3. Draw an horizontal infinity line
4. Duplicate “layer 1” (layer 1 Copy)
5. Hide “layer 1 Copy” 6. Try to select the line in “layer 1”

What happens: It’s not possible to select the line in the visible layer (layer 1) if the line is present in the duplicated layer (layer 1 Copy) and that layer is either hidden or locked.

Expected: It should be possible to select the line, as the overlapping line in the other layer is hidden/locked .

 2304 QCAD (main)TaskLow Printing blank page Closed
100%
Task Description

Hello,

I must have something set up wrong, prints blank both on printer and pdf....

 2303 QCAD (main)Bug ReportLow Arc/Circle/Ellipse area (IC) exception for CW ellipse A ...Closed
100%
Task Description

Windows 7 pro 32 bit msi-Installer
Version: 3.26.4.5 (3.26.4.5)
Internet: QCAD.org
Build Date: Jul 20 2021
Revision: e596276
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Andrew,

With an CW ellipse Arc > 180° the GUI method info Arc/Circle/Ellipse (IC) in segment mode throws an exception:
Uncaught exception at :scripts/Information/InfoArcCircleArea/InfoArcCircleArea.js:210: ReferenceError: Can’t find variable: remainSectorArea

Rather a complex way to get the area of an ellipse arc segment.

There: area = majorR * minorR / 2 * (sweep - Math.sin(sweep)).
- where majorR, minorR & sweep can simply be sourced from the ellipse arc shape/entity.
- where the area is signed ... +CCW, -CW

About identical as for an arc segment.

For an (ellipse) arc sector one would only need to add/subtract
the area of triangle |StartP-CenterP-EndP|

Regards,
CVH

2302QCAD (main)Bug ReportVery Lowpolygon.getSelfIntersectionPoints(tol) returns 3th inva...Assigned
0%
1 Task Description

Windows 7 pro 32 bit msi-Installer
Version: 3.26.4.5 (3.26.4.5)
Internet: QCAD.org
Build Date: Jul 20 2021
Revision: e596276
Qt Version: 5.13.2
Architecture: i386
Compiler: Unknown

Andrew,

In the attached dxf:
Besides that it is clear that duplicate vectors are not filtered ...
Where a segment is crossing in another node a non valid node is returned as self-intersection point.
Seems to be unrelated to CW/CCW or tolerance.

Where 2 nodes coexists 4 duplicate vectors are returned.

Regards,
CVH

2301QCAD (main)Feature RequestLowRotate preview on/offAssigned
0%
1 Task Description

Hi,

I believe prior QCAD version 3.22.0.0 there was no rotating preview. The rotating preview shows the outcome regarding to the chosen center point. I know that it is also common for move/copy. However, for me it is very confusing and difficult to chose the correct center point for a rotation if I’m constantly been distracted by the most of the time overlapping preview of my selection. This said if the drawing is very detailed I have to zoom in extremely to be able to snap to the right entity. That wouldn’t be necessary without the preview. Additional rotate a large drawing selections will compromise the performance - CPU is going like crazy.

It would be nice to have an option to turn this preview on/off.

2300QCAD (main)Feature RequestLowDuplicate layout blocks with contentsAssigned
0%
2 Task Description

Add a tool to duplicate a layout block with contents.

Showing tasks 201 - 250 of 2549 Page 5 of 51<<First - 3 - 4 - 5 - 6 - 7 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing