|
2552 | QCAD (main) | Bug Report | Low | Windows shortcut Alt + Underlined Key fails partly in m... | Assigned | |
|
Task Description
Reason: Same underlined keys are used for different menus
Select and Snap = S, Dimension and Info = I, Modify and Misc = M,
|
|
2551 | QCAD (main) | Bug Report | Low | Cursor and visualization problems | Assigned | |
|
Task Description
The last version (3.29.4) present a very important issue. When we work with a “complicated” file (about >1MB or up see attachment test.dwg) the cursor and selected object not work fine after move some layout windows in Paper_Space: disappear coordinates informations and snap nodes. (see attachment before.png an after.png) This issue is present in all Qcad version (Linux, Mac-intel, Mac-silicon, Windows). The last working-fine version is 3.28.2 I’m a enthusiastic Qcad user and I hop that this issue will be fixed early! Regards Arch. Riccardo Beduschi
|
|
2550 | QCAD (main) | Bug Report | Low | Only a partial hatch appears in a closed shape | Assigned | |
|
Task Description
I’m seeing only a partial hatch in the shape. See here for details.
|
|
2549 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences > Printing > Multi Pages > S ... | Closed | |
|
Task Description
Clicking “Set to Printer Margins” has no effect.
|
|
2548 | QCAD (main) | Bug Report | Low | Modify > Projection > Isometric Projection (Cylindrical ... | Closed | |
|
Task Description
The option “true scale” has no effect, projected result does not use true scale.
|
|
2547 | QCAD (main) | Bug Report | Very Low | Block > Purge Unused Blocks > Removes _DatumFilled bloc... | Assigned | |
1 |
Task Description
Andrew,
The _DatumFilled Block used by Datum entities (DT) is considered as not used and is purged by Purge Unused Blocks (BP). There is no block association for these special types of arrowheads in QCAD.
After purging the Datums are not immediately updated but the special arrowheads will eventually disappear. Adding new Datums will not fix that.
Not problematic because the _DatumFilled Block is re-created on save/reload when Datum entities exists. Datums are updated.
Probably not OS or version related. Related forum topic: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=10694
Best solution would be to support different types of arrowheads and all related: https://qcad.org/bugtracker/index.php?do=details&task_id=695 https://qcad.org/bugtracker/index.php?do=details&task_id=757 https://qcad.org/bugtracker/index.php?do=details&task_id=1157
Regards, CVH
|
|
2546 | QCAD (main) | Bug Report | Low | After unit change "Autofit drawing to page" - fails | Closed | |
|
Task Description
Hi,
tested with back_plate.dxf (QCAD Tutorial Example)
Drawing is original mm, metric, A4. Printprewiew works, Autofit Drawing to page etc. works as expected!
In Drawing Preferences: Changed settings to inch, imperial, Ansi A Printpreview works but options like “Autofit Drawing to page” and “Autofit pages to drawing” are not working as usual ...
Went back to mm etc - everything works again as expected.
|
|
2543 | QCAD (main) | Bug Report | Low | Polygonal Area Tool (IR) creates shapes persistently, c... | Assigned | |
1 |
Task Description
Upon activating the Polygonal Area Tool either by clicking on the toolbar or by the IR keyboard shortcut the tool will persistently draw a polygon without clicking anything. This happens with the mouse and the trackpad on the MacBook Pro. This was happening in 3.29.3, and then after I upgraded to 3.29.4. The MacOS version is 14.1 Sonoma.
|
|
2542 | dwg2pdf | Bug Report | Low | dwg2pdf: lineweight is scaled with drawing scale, shoul ... | Closed | |
|
Task Description
When using PDF Export I see different lineweight to using dwg2pdf. See Different lineweights PDF Export vs dwg2pdf
|
|
2539 | QCAD (main) | Bug Report | Very Low | (Relative) Polar feet + surveyor notation fails. | Assigned | |
1 |
Task Description
Andrew,
A user essentially pointed out to an ACAD textbook example. https://qcad.org/bugtracker/index.php?do=details&task_id=2533 Step 3 of: https://autodesk.blogs.com/between_the_lines/2012/07/drawing-with-surveyors-units-in-autocad.html
Please refer to this topic: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10652
Regards, CVH
|
|
2538 | QCAD (main) | Bug Report | Very Low | Weight 2.11 French translation typo | Assigned | |
1 |
Task Description
Andrew,
When switched to French I detected a typo in the drop down box for Lineweight.
Weight 2.11mm is listed as 1.58mm {2.11m?} https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts#L1228-L1229 Also see attached image file.
May I ask why only ISO types have a comma instead of a point in French. The use of a comma is uncommon in the Property Editor even when that is the native decimal separator. I also detect an extra space between the value and ‘mm’ and that only for the ISO types.
This only occurs in: https://github.com/qcad/qcad/blob/master/ts/qcadcore_fr.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pl.ts https://github.com/qcad/qcad/blob/master/ts/qcadcore_pt.ts
Probably not OS or QCAD version related.
Regards, CVH
|
|
2534 | QCAD (main) | Bug Report | Low | Clipping in model space after working in paper space | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10650
|
|
2533 | QCAD (main) | Bug Report | Low | Surveyor's units never seem to display when selected as... | Assigned | |
|
Task Description
I've tried several times to try to see what the "surveyor's units" option of the Angular Dimensions format in the UI preferences will display as, but all it ever seems to do is cause the angle measurement to become blank. No angles are displayed whenever this mode is selected.
Indeed, I cannot figure out what the setting actually does besides causing angles to never be displayed.
Is there a way to make this setting do something meaningful or is it just broken?
I found an old forum thread from 2016 about this same issue and it sounds like the same things is still happening since then.
I'm not a surveyor so I have no actual practical use for these units that I can yet see, but I just figured I'd add an report to the bug tracker here in case any developers aren't aware that the bug still seems to exist.
Does the setting do anything besides changing the displayed units in the status bar?
|
|
2526 | QCAD/CAM | Bug Report | Low | Nesting: Fewer or no solutions when not using "Place sm ... | Closed | |
|
Task Description
If nesting preference “Place small parts into holes of other parts” is disabled there may be fewer solutions or no solution if rotations is set to 1.
|
|
2525 | QCAD (main) | Bug Report | Low | Persistent state of some tools broken under macOS M1/M2 ... | Closed | |
|
Task Description
Affected tools: Insert Bitmap (keep proportions), Rotate (by mouse), Scale (by mouse).
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10598
|
|
2524 | QCAD (main) | Bug Report | Low | Dimension > Reset Label Position: broken under macOS M1 ... | Closed | |
|
Task Description
Label position is only reset on reload / entity regeneration.
|
|
2523 | QCAD (main) | Bug Report | Low | Dimensions: Context menu of text label edit: <> entry | Closed | |
|
Task Description
Context menu of dimension text label line edit widgets offers a <> entry which does not insert <>.
|
|
2522 | QCAD (main) | Bug Report | Low | Zoom box preview | Closed | |
|
Task Description
When screen-based linetypes are enabled, the zoom box width depends on the zoom level and can get very wide / thin.
|
|
2521 | QCAD/CAM | Bug Report | Low | CAM Simulation: No tool visible | Closed | |
|
Task Description
Exception in CAM simulation when previewing tool position.
|
|
2520 | QCAD (main) | Bug Report | Medium | No Layer Groups | Closed | |
|
Task Description
Layer groups are not present. See attached screenshot and link. In screenshot....3.28 is on the left, 3.29 on the right.
|
|
2519 | QCAD (main) | Bug Report | High | Fit point Splines not displaying | Closed | |
|
Task Description
If I draw a ‘control points’ spline, it draws fine. If I draw (or open a file with...) ‘fit points’ spline, then that spline type wont’ display. (see attached video)
* If I ‘select all’, then the fit points will display/highlight; however, the spline itself does not display.
|
|
2518 | QCAD (main) | Bug Report | Low | Display error when using selection box or info tools | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10563 https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10567
|
|
2517 | QCAD (main) | Bug Report | Low | QCAD cursors being malformed. | Closed | |
1 |
Task Description
Andrew,
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=8&t=10562
From the looks of it the cursor image data is read at a wider pace as it is stored. One can distinguish the double cross positioning QCAD cursor but it is shifted.
Regards, CVH
|
|
2516 | QCAD (main) | Bug Report | Low | Screen-based Linetypes issues with pixel based line wid ... | Closed | |
|
Task Description
Andrew,
Related topics: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10567 https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10563
Regards, CVH
|
|
2515 | QCAD (main) | Bug Report | Low | File > New from template: no dialog shown | Closed | |
|
Task Description
File > New from template does not show the dialog and shows a spinning wheel instead.
|
|
2514 | QCAD (main) | Bug Report | Low | Font display in vertical tabs when font is italic. | Closed | |
|
Task Description
As explained in this forum post.... https://www.qcad.org/rsforum/viewtopic.php?f=30&t=10520
|
|
2513 | QCAD (main) | Bug Report | Low | MACOS Compile Error | Closed | |
|
Task Description
Using XCODE15, QCAD fails to compile. The error shown:
In file included from include/spatialindex/SpatialIndex.h:251: include/spatialindex/MovingRegion.h:155:34: error: no template named ‘binary_function’ in namespace ‘std’; did you mean ‘__binary_function’?
Per Apple’s website, binary_function are no longer provided in C++17 and newer
|
|
2512 | QCAD (main) | Bug Report | Very Low | stretch | Closed | |
|
Task Description
hello. if i use the tool on my own drawing, no problem, but on an element coming from the library, the blue selection square appears, it moves but the chosen shape doesn’t follow. i’ve tested several ways and even by creating a block. cordially
bonjour. si j’utilise l’outil sur mes propre dessin, aucun Souci, mais sur un élément de venant de la bibliothèque, le carre de sélection bleu apparait, ce déplace mais la forme choisi ne suis pas. j’ai teste plusieurs manière et même en créant un bloc. cordialement
|
|
2511 | QCAD (main) | Bug Report | Low | Decimal separator fails in references '?' | Closed | |
|
Task Description
Hi, I’m new in QCAD.
I need to print some drawings amd the decimal separator is a ‘?’ instead of ‘.’.
Mi versión is QCAD 3.28.2.0, revision a8039fc, Qt version 5.13.2, architecture x86_64, and the OS is Windows 10.
How can I solve this?
Thanks
|
|
2510 | QCAD (main) | Bug Report | Low | Crash in RSpline::getLength | Closed | |
|
Task Description
RSpline::getLength crashes in some cases. Bug in OpenDesign libraries OdDbSpline::getDistAtParam.
|
|
2509 | QCAD/CAM | Bug Report | Very Low | CAM > Laser GRBL Tool creation failed | Closed | |
|
Task Description
Related topic: https://www.qcad.org/rsforum/viewtopic.php?f=91&p=43078#p43076
Reason: LaserBase.js should not only make CamPlungeRate and CamPlungeRate_Label invisible, but also set a default value, such as zero.
Temporary fix: https://www.qcad.org/rsforum/viewtopic.php?f=91&p=43078#p43078
|
|
2508 | QCAD (main) | Bug Report | Low | File > Print / PDF Export: Fails when crop marks are en ... | Closed | |
|
Task Description
Printing / PDF export with crop marks enabled fails with Qt 6 packages macOS on M1/M2/M3.
|
|
2504 | QCAD (main) | Bug Report | Low | Spline no add Point or Remove | Closed | |
|
Task Description
I can not add or remove Points to existing Spline
|
|
2502 | QCAD (main) | Bug Report | Low | CAM > Nesting: Crash with tabs and multiple instances | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?p=42574#p42574
|
|
2500 | QCAD (main) | Bug Report | Low | Qcad 3.28.2 alters color of adjacent text, if certain u... | Assigned | |
|
Task Description
Qcad alters color of adjacent text, if certain unicode characters are used.
Version: 3.28.2.0 (3.28.2) Internet: QCAD.org Build Date: Aug 30 2023 Revision: a8039fc Qt Version: 5.13.2 Architecture: x86_64 Compiler: MSVC++ 14.0 (2015)
Flytracker appears to have the same problem, as this report was rejected when I inserted the same characters into the title. Query {SELECT tag_id FROM `flyspray_list_tag` WHERE (project_id=0 OR project_id=?) AND tag_name LIKE ? ORDER BY project_id} with params {1,} Failed! (Illegal mix of collations (utf8_unicode_ci,IMPLICIT) and (utf8mb4_general_ci,COERCIBLE) for operation ‘like’)
|
|
2499 | QCAD (main) | Bug Report | Low | QCAD font display problem | Closed | |
|
Task Description
indows10 QCAD3.28.2 I display different fonts in three different CAD software. QCAD displays incorrectly (text display width is incorrect). The attachment is three different CAD display effects. The red mark is where QCAD displays errors.
|
|
2498 | QCAD (main) | Bug Report | Low | Light/dark mode UI colours depend on OS theme when QCAD... | Assigned | |
1 |
Task Description
On macOS 14.1 and QCAD 3.28.2, the state of the OS (light or dark theme) affects some of the QCAD colour palette for the life of the session. So far I’ve noticed the problem with the keyboard shortcuts in tooltips and text in the command line output, but there may be other instances of the problem.
To reproduce:
1. Set the OS to light mode.
2. Start QCAD. Note the keyboard shortcuts in the tooltips are optimised for a light palette.
3. With QCAD still running, switch the OS to dark mode.
4. Note that while most of the QCAD interface switches to a dark mode palette, the keyboard shortcuts in the tooltips do not.
A similar behaviour is observed when starting from dark mode and switching to light mode.
I hope that makes sense. See attached screenshots for examples.
|
|
2497 | QCAD (main) | Bug Report | Very Low | Draw > Circle > 3 Tangents (CT3) fails in some cases wi... | Assigned | |
1 |
Task Description
Andrew,
See attachment with example:
Solution included on layer ‘Solution’.
Regards, CVH
|
|
2496 | QCAD (main) | Bug Report | Low | Draw > Ellipse > Inscribed may return rotated or wrong ... | Closed | |
1 |
Task Description
Andrew,
In some cases Draw > Ellipse > Inscribed in Quadrilateral (EQ) may return a perfectly healthy result but rotated for 90 degrees. - Size doesn’t matter. - Quadrant doesn’t matter. - Geometrical open or closed base shape doesn’t matter. - A mirrored base shape usually preforms well.
See attachment with examples. The incorrect results (red) are rotated 90 degrees around the ellipse center (dotted) Green is a correct result from a mirrored base shape.
Regards, CVH
|
|
2495 | ECMAScript | Bug Report | Very Low | RLine.isParallel(RLine) may return true for certain non... | Assigned | |
1 |
Task Description
Andrew,
It took me a while to find the source of a certain freak bug I encountered. I used the RLine.isParallel(RLine) as a test for knowing if line segments were parallel or not.
Included below is script code that mimics the functionally of isParallel().
As far as I know isParallel() is nowhere used in the QCAD open source. Textual only found in RLine.cpp & .h or under: opennurbs, ecmaapi\generated and ecmagenerator\src.
// Example:
// RShape1: RLine(RShape(address: "0xcd70e28"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(1010.000000, -140.000000, 0.000000, 1)")
// RShape2: RLine(RShape(address: "0x7659770"), startPoint: "RVector(969.219858, -171.914894, 0.000000, 1)", endPoint: "RVector(930.000000, -340.000000, 0.000000, 1)")
----
var aShape1Angle = shape1.getAngle(); // =0.6640461628266838 rad
var aShape2Angle = shape2.getAngle(); // =4.483157047107694 rad
----
// RLine::isParallel(RLine) -> aTest1 || aTest2
var aTest1 = RMath.isSameDirection(aShape1Angle, aShape2Angle); // =false
var aTest2 = RMath.isSameDirection(aShape1Angle, aShape2Angle + Math.PI); // =true
var aTestOr = aTest1 || aTest2; // =>TRUE !?
----
// # BUG # RShape1 is considered as parallel with RShape2
----
// RMath::isSameDirection(dir1, dir2, tol) ... tol = RS.AngleTolerance = 1e-9
// for aTest1 -> ax1Test1 || ax1Test2
var ax1Dif = Math.abs(aShape1Angle - aShape2Angle); // =3.8191108842810104 rad
var ax1Test1 = ax1Dif < 1e-9; // =false
var ax1Test2 = ax1Dif > 2*Math.PI - 1e-9; // =false
var ax1TestOr = ax1Test1 || ax1Test2; // =>FALSE
----
// for aTest2 -> ax2Test1 || ax2Test2
var ax2Dif = Math.abs(aShape1Angle - (aShape2Angle + Math.PI)); // =6.9607035378708035 rad
var ax2Test1 = ax2Dif < 1e-9; // =false
var ax2Test2 = ax2Dif > 2*Math.PI - 1e-9; // =true
var ax1TestOr = ax1Test1 || ax1Test2; // =>TRUE
----
// # BUG # The second test of the second isSameDirection() test returns true because ax2Dif is over 2pi
Regards, CVH
|
|
2494 | QCAD (main) | Bug Report | Very Low | Information scrip on drawing screen unaligned. | Waiting on User | |
|
Task Description
Please view the attachment.
Regards
Graeme
|
|
2493 | QCAD (main) | Bug Report | Low | The ruler is not appearing after update to 3.28.2.4 | Closed | |
|
Task Description
The rulers/ruler ticks disappeared after updating to 3.28.2.4 for Mac.
|
|
2492 | QCAD (main) | Bug Report | Low | Block > Create Library Item: Not working if part librar ... | Closed | |
|
Task Description
This tool is also being used outside of the part library browser context by some users.
|
|
2491 | QCAD/CAM | Bug Report | Low | CAM > Nesting: Fails for duplicate block references | Closed | |
|
Task Description
- Create a block reference to block “A” - Duplicate block reference - Nest both block references
Only one block reference is nested, the other one is not placed.
|
|
2490 | QCAD (main) | Bug Report | Low | File > SVG Export: wrong line color (Qt 6) | Closed | |
|
Task Description
Some colored lines are exported as black on macOS M1 / Qt 6.
|
|
2489 | QCAD (main) | Bug Report | Low | Prints A1 instead of drawing | Closed | |
|
Task Description
All I get when I print is an “A1”, which I believe is the drawing size
|
|
2486 | Command line tools | Bug Report | Low | dwgnest: part multiplicator switch (-u) has no effect | Closed | |
|
Task Description
-u / -multiplier switch has no effect (option applied to later during initialization of nester).
|
|
2485 | QCAD (main) | Bug Report | Low | Application Preference "Dimension Settings > Text above ... | Closed | |
|
Task Description
In QCAD Pro, I found that setting the application preference to disable “Text above dimension line” does not transfer to new drawings.
My setup: QCAD Professional version: 3.28.1.0 Date: Mar 30 2023 Qt version: 5.8.0 Compiler version: gcc 4.8.1 Build date: Mar 30 2023 Revision: ca7ec144abd203d2a68ca91c0ff0684868ba08a5
OS: Xubuntu 23.04 Kernel: 6.2.0-25-generic Resolution: 1920×1200 DE: Xfce 4.18 WM: Xfwm4
Demonstration procedure follows:
Fresh install QCAD Pro (no previous config file);
Edit –> Application Preferences
Under “Defaults for New Drawings”, select “Dimension Settings”
Under “Dimension Style”, “Text above dimension line” is enabled by default. Uncheck it, then press Apply button.
Change one or more other settings; for instance “Linear Dimensions” to Decimal, or the Precision. Press Apply button accordingly.
Press OK button to dismiss Application Preferences.
Quit out of QCAD Pro.
Reopen QCAD Pro. Create something that can be dimensioned, and dimension it. Label will appear above the dimension line.
Edit –> Drawing Preferences
Under “Dimension Style”, “Text above dimension line” is checked, contrary to the Application Preference setting. The other preference settings are in effect.
|
|
2484 | QCAD (main) | Bug Report | Low | Crash (or quit?) when checking for QCAD Pro updates | Closed | |
|
Task Description
QCAD Pro crashes (or quits; there’s no crash report dialog shown) if I select Help–> Check for QCAD Pro Updates.
I’ve tried uninstalling and reinstalling QCAD, and the configuration file. Doesn’t help.
QCAD Professional version: 3.28.1.0 Date: Mar 30 2023 Qt version: 5.8.0 Compiler version: gcc 4.8.1 Build date: Mar 30 2023 Revision: ca7ec144abd203d2a68ca91c0ff0684868ba08a5
xubuntu 23.04 6.2.0-25-generic
|
|
2483 | QCAD (main) | Bug Report | Low | File > Open: MLeaders with text not imported | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=10159
|