QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  ascSummaryStatusProgress
752QCAD (main)Feature RequestVery LowAdd support for the 3dConnexion Space Navigator (Pan an...Assigned
0%
4 Task Description

The 3dConnexion Space Navigator would be wonderful as a pan and zoom control. I find it extremely useful in SketchUp and when I switch from that to QCAD am always disappointed to find it doesn’t work.

3dconnexion DOT com/buy/shop.html?3dxcp=GA_GA_search_google_US_Brand

While full support for the buttons and such would be nice, just the ability to map the axis to pan and zoom would be wonderful.

2544QCAD (main)Feature RequestVery LowRequest to add "plain text" paste, traditionally CTRL-S...Assigned
0%
2 Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10379

Could you add “plain text paste” as ctrl-shift-V
Why? Because sometimes the clipboard comes in with rich text formatting that’s anti-helpful.
The workaround is to paste into a plain text editor, or the console, then recopy and repaste into qCad.

Either way the ctrl-shift-V shortcut is useful for those trained on other software but:
one could also argue that qCad should NEVER take rich text, and rather only accept the plain text with both CTRL-V and CTRL-SHIFT-V.

— CHV says

Agreed, having encountered it numerous times while documenting with text snippets from elsewhere. :roll:
Even copying Info measurements from the Command Line are Rich Text.

The best place to file a feature request is QCAD Bugtracker:
https://www.ribbonsoft.com/bugtracker/ You may need a different account there or make a new one.

May I remark that Ctrl-Shift-V is already in use for Paste along Entity (PE)
But not when the Text Editor Widget has the focus and dialog Widgets are always modal on a Win OS system. :wink:
Still, I’ll vote for it in any way.:P

Regards,
CVH

991QCAD (main)Feature RequestVery LowAdd warning when overwriting custom propertyAssigned
0%
1 Task Description

Property Editor - Geometry - Custom - Add Custom Property

If I use an identical Name accidentally again in the Custom Property dialog - it will overwrite the first value with the same name without any warnings.

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

2107QCAD (main)Feature RequestVery LowAdd a button to the tool bar to allow for a quick backg...Assigned
0%
1 Task Description

I find myself with reasonable regularity needing to change the background color between black and white. It would be much more efficient to have a toggle button on the ribbon to make this sort of instant (kind of like the “screen based line types” button works but make it for background color and just between black and white or let people define their dark and light themes and toggle the background between the two.

2452QCAD (main)Feature RequestVery LowKeyboard Shortcut for Undo Last Point While Drawing Spl...Assigned
0%
1 Task Description

Instead of having to click on the toolbar, it would be useful to have a keyboard shortcut for undoing the last fit point (or control point) while drawing splines. Preferably it would also be nice to allow the user the ability to set what the keyboard shortcut is for this function.

2501QCAD (main)Feature RequestVery LowAdd spelling checker / spell checker for all text boxesAssigned
0%
1 Task Description

Suggestion to add spelling checker / spell checker for all text boxes

2505QCAD (main)Feature RequestVery LowInfo > Polygonal Area > Use dimension decimal format fo...Assigned
0%
1 Task Description

Andrew,
On behalf of user Kmeelo

Polygonal Area adds measurements text with 12 decimal digits and then as short as possible.

Current formatting path see: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=10450&p=42833#p42805

Related forum feature request: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=10458

I also see a misconception of the term ‘precision’.
Numbers precision is the amount of significant digits disregarding the position of the decimal point.
12 decimal digits is about the largest precision for numbers with 5 integer digits.

Regards,
CVH

1649QCAD (main)Feature RequestVery LowAdd configuarable format options for saving blocks to l...Assigned
0%
Task Description

Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.

1788QCAD (main)Feature RequestVery LowNew snap: reference points of a block referencesAssigned
0%
Task Description

I know this was reported and fixed before ...

https://www.qcad.org/bugtracker/index.php?do=details&task_id=843

... but it looks like we have the issue now back with some kind of variation.

If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.

If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.

Edit: New Test drawing:

1920QCAD (main)Feature RequestVery LowEdit > Application Preferences: Add preference to disab...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447

1922dwg2bmpFeature RequestVery LowAdd error message when requesting raster for a non-exis...Assigned
0%
Task Description

It would be nice if QCAD spit some kind of warning message when trying to render a layer with a name that doesn’t exist (and perhaps render nothing), rather than silently rendering an empty image. :D

See https://qcad.org/rsforum/viewtopic.php?f=33&t=6453

2226QCAD (main)Feature RequestVery LowmacOS: support proxy iconAssigned
0%
Task Description

Support proxy icon in title bar. This can be used to move the file to another folder using drag and drop.

2287QCAD (main)Feature RequestVery LowEvaluate draw order for preference "Prevent white-on-wh...Assigned
0%
Task Description

The Application Preference setting “Graphics View - Appearance - Prevent white-on-white/black-on-black display” seems to be a global setting that doesn’t take the draw order into account. For example: With the setting enabled, it prevents creating a white hatch of a higher draw order on top of a larger, colored hatch with lower draw order (background). The preference does not seem to evaluate if the object is truly drawn as “white-on-white”.

With the preference enabled, setting the object color as “white” will set the “white” color label, but the object color actually stays black. Its hard to determine why it happens in that case.

Is it possible to let the global preference setting be applied to objects after evaluation of the draw order, and determine if the object actually is a true case of white-on-white?

My workaround: Disable the preference setting (I think it is default = on), and only enable it for ad-hoc checks of hidden and overlooked objects.

694QCAD (main)Feature RequestLowUser coordinate systems (UCS)Assigned
0%
13 Task Description

UCS support.

763QCAD (main)Feature RequestLowHatching with just one clickAssigned
0%
10 Task Description

My task: To hatch an area.

Right now, if I want to fill an area with a hatch pattern, I have to select all the enclosing objects (lines, arcs) and then I can select the hatch tool. That can be under some circumstances a tedious task.
To illustrate this, I created a simple example (see Attachment 1: Hatching.png).

Step 1: Create a rectangle.
Step 2: Draw four vertical lines.
Step 3: Select the four lines surrounding the first area. –> Problem! The horizontal lines are too long.
Step 4: Divide the long horizontal lines of the rectangle where the vertical lines touch. Now the lines surrounding the three areas can be selected.
Step 5: Hatch the selection. Done.

Just for fun try recreating my second example (see Attachment 2: Hatching2.png)

Therefore I would like to suggest a far more simple approach.

Step 1: Select the Hatch Tool.
Step 2: Click inside the area you would like to be hatched. Done.

Of course that would mean that the hatch style is already pre-defined and can be changed later, if needed.

In this way productivity can be increased by ... [fill in you own estimate] ... times.

Example 2 would need only 13 clicks to hatch all the areas (including the hatch tool button).

228QCAD (main)Feature RequestLowInsert current date (and other fields)Assigned
0%
9 Task Description

Insert field into drawing that displays current date, file name, ...

1224QCAD (main)Feature RequestLowRevision cloudsLikely to be implemented
0%
9 Task Description

Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.

1488QCAD (main)Feature RequestLowDimension text positionAssigned
0%
7 Task Description

This one is a really important one for me, as currently I am doing a lot of dimension and annotation drawings.
I would like to request an option to be added to the dimension settings for both drawing and application settings to be able to choose whether the dimension text is to the right or left side or over the top or underneath the dimension line.
This would help tremendously when a lot of dimensions are needed!

Regards

Clive

972QCAD (main)Feature RequestLowDistribute equally option ...Assigned
0%
6 Task Description

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

2018QCAD (main)Feature RequestLowLayer visibility setting per view/view-portAssigned
0%
6 Task Description

In a medium complex drawing it’s often too much details to have all layers in a drawing visible at once. Also, it is of great importance to be able to have a single model to avoid duplication of work and risk inconsistency.

So i would like to create a number of views where each view has selected layers visible (that makes sense for the purpose of the view) and then assign the views to different layout blocks (using view-ports) in paper-space to be able to setup printing of several views on the same page/PDF

This also means that view-ports would have to be aware of what view they are displaying (if any besides the standard-view).
This will then make it possible for printouts of different views with selected layers visible (different for each view and view-port) and still have only one model. Today this is not possible.

As it is today the only limited workaround is to set the layers you want to display, print/PDF of that viewport on separate page, and then change it for the next page, and so on. The big drawback is that you cannot have two different views/view-ports on the same page with different layers visible. Also, for large drawing it is painful to have to do a lot of manual setup for each rendering of the complete drawing.

1428QCAD (main)Feature RequestLowSnap middle of the minimum distance between two entity'...Assigned
0%
5 Task Description

Hi,

from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.

Pic 1: Given situation
Pic 2: Result after using this new snap tool

Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?

1721QCAD (main)Feature RequestLowInsert table toolAssigned
0%
5 Task Description

Hi Andrew,

I’m not sure whether this has been added or suggested already. It would be great to have a built in QCAD table tool for producing cutting lists or bill of materials etc. A dedicated table tool would be a real boost to QCAD Pro ;)

Many thanks

Clive

2353QCAD (main)Feature RequestLowadd theme folder to a local shared pathAssigned
0%
5 Task Description

Would it be possible to add Qcad’s theme folder to the local shared path, for example this would be /home/username/.local/share/QCAD/QCAD/themes for Linux. I know this works well for line types and would be extremely helpful for themes.

741QCAD (main)Feature RequestLowAn additional Radius Measurement tool ...Assigned
0%
4 Task Description

It would be nice to have an additional Radius Measurement tool with short leads. The current Radius tool shows always the lead line to the center of the radius what is in many cases not useful.

I’m not asking for a workaround ;-)

895QCAD (main)Feature RequestLowArea calculation based on existing entitiesAssigned
0%
4 Task Description

Use case:

  • Start tool
  • Choose one entity of the contour
  • If contour is closed, area of closed contour is calculated an printed in the command line history
  • Configuration parameters: segment length for arc interpolation
1099QCAD (main)Feature RequestLowAdd Leader with text and number bubbleAssigned
0%
4 Task Description

Having leader with numbers and text would be awesome to better interact with the drawing and making BOM lists.

Currently it takes too mush time to make the leaders with text and number bubbles.

1112QCAD (main)Feature RequestLowGradientsAssigned
0%
4 Task Description

I would very much like to ask for the option to Hatch/Fill with a gradient of one or two colours.

Many Thanks

Clive

1165QCAD (main)Feature RequestLowNew Create Spiral ToolAssigned
0%
4 Task Description

A new tool to create Spirals would be great to have, with an option to restrict the decline to achieve to draw either Logarithmic or Linear styles.

Please see related topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3236

1723QCAD (main)Feature RequestLowDetecting overlapping line / arc segmentsAssigned
0%
4 Task Description

Add a tool to detect overlapping segments or lines and arcs.
Similar like the “overkill” command in other CAD systems.

1983QCAD (main)Feature RequestLowTrim All or Bulk Break outAssigned
0%
4 Task Description

This is a trim method I am missing in Qcad.

20 years ago it existed in CadKey.
You had a bunch of lines or segments.
You defined a (new) line or segment as cutter.
‘Trim All’.
You pointed at the side of the cutter entity to trim all intersecting at that side.

Pritty the same as in this topic:
https://qcad.org/rsforum/viewtopic.php?t=5221

Only in rare cases I can use Husky’s workaround as pro.
It all depends on what else is in the clipping rectangle that is needed to trim all intended.
If of no use all single crossing entities have to be chosen one by one.

Regards,
CVH

2070QCAD (main)Feature RequestLowcropping imageAssigned
0%
4 Task Description

It may be useful to insert the “image cropping” function both in top / bottom - right / left mode, and with polyline

275QCAD (main)Feature RequestLowRounding all corners of a polylineAssigned
0%
3 Task Description

Modify - Round - Click polyline - round all corners

734QCAD (main)Feature RequestLowPossibility to distribute a selection equal to each oth...Assigned
0%
3 Task Description

It would be nice to have an extra option for the Align tool what provides the possibility to an equal distribution of a selection ...

Screenshot:
First row: Befor / Second row: after

758QCAD (main)Feature RequestLowLengthen/Shorten tool - add additional optionAssigned
0%
3 Task Description

When using the Lengthen/Shorten tool it would be good to have an additional option to be able to pick a point to lengthen or shorten to.

952QCAD (main)Feature RequestLowDimensions: manually control arrow positionAssigned
0%
3 Task Description

See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.

The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.

1100QCAD (main)Feature RequestLowAdd drag dimension (snap) along dimension lineAssigned
0%
3 Task Description

In Autocad when making a dimension when left clicking to place the dimension there is the possibility to drag the dimension to either side of the dimension. This is also possible with Qcad dimension, but it losses the snapping and does not extend the dimension line out to the dimension text.

This is very useful when the two lines the needs a dimension are close together, or overlapping with another.

Attached is two images one for autocad and one for Qcad

1106QCAD (main)Feature RequestLowAdd support for wipeoutsAssigned
0%
3 Task Description

Wipeout entities can be used to hide rectangular or polygonal sections of a drawing, for example to make space for a label inside a hatch.

1126QCAD (main)Feature RequestLowSuggestion for Dimension Location settingAssigned
0%
3 Task Description

Please seet topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124

1157QCAD (main)Feature RequestLowDimension settings - arrowhead styleAssigned
0%
3 Task Description

A ‘non -filled’ arrowhead would be good to have also.

1187QCAD (main)Feature RequestLowScale possibility for Info tools ...Assigned
0%
3 Task Description

Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”.
It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.

1206QCAD (main)Feature RequestLowLink drawings with each other to update layers, blocksAssigned
0%
3 Task Description

See:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3410

1470QCAD (main)Feature RequestLowDouble line tool requestAssigned
0%
3 Task Description

I would love to have a ‘Double Line’ tool in QCAD.

For me this would be such a time saver when drawing out building floor plans in QCAD.

1596QCAD (main)Feature RequestLowView > Selection Filter: add filter for custom properti...Assigned
0%
3 Task Description

See also:
https://qcad.org/rsforum/viewtopic.php?f=32&t=4840

1628QCAD (main)Feature RequestLowMove / Copy and snap tangentialAssigned
0%
3 Task Description

Please see:

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5024#p18601

1674QCAD (main)Feature RequestLowLayouts and Viewports: duplicate layout blockAssigned
0%
3 Task Description

Duplicate layout blocks

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5241

1999QCAD (main)Feature RequestLowViewport: Add additional properties for controlling dim...Assigned
0%
3 Task Description

When working with multiple Viewports with different scale it could be very useful to have extra properties controlling how dimensions are rendered in the viewport:

1)
E.g an extra “Dimension Scale” under “Scale” in the Viewport selection’s ‘Specific Properties’ section, could allow having the same size when printed.
This Dimension Scale would be multiplied on top of the Scale value, but only for Dimensions rendering.

2)
Toggle button for hiding any dimensions in the Viewport. Maybe this should be controlled by being able to specify a Layer that should be hidden in this Viewport only, then I could select my Dimensions layer here.

The Viewport properties:
https://i.imgur.com/s07JtaB.png

2182QCAD (main)Feature RequestLowSelect > Select PreviousAssigned
0%
3 Task Description

Select the previously selected entities.

2191QCAD (main)Feature RequestLowExtend the functionality of the Reorder toolAssigned
0%
3 Task Description

Add functions to the Reorder tool, similar to the functions of the counter tool, undo last step and start at any number, allowing corrections and restarting the tool part way through.

See the discussions at https://qcad.org/rsforum/viewtopic.php?f=32&t=8170

2288QCAD (main)Feature RequestLowLayer State WidgetAssigned
0%
3 Task Description

The option of a layer state widget would be a nice way to see and select between different layer states.

Showing tasks 1 - 50 of 371 Page 1 of 81 - 2 - 3 - 4 - 5 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing