QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeveritySummaryStatusProgress
512QCAD (main)Feature RequestLowModify stretch and Restrict orthoAssigned
0%
1 Task Description

The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.

So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?

503QCAD (main)Feature RequestLowConvert entities to points with a fixed distanceAssigned
0%
Task Description

Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.

See also forum at:
http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834

502QCAD (main)Feature RequestLowPoints on line: enter distance instead of number of poi...Assigned
0%
1 Task Description

Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.

500QCAD (main)Feature RequestLowAutohide Side PanelAssigned
0%
1 Task Description

it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.

498QCAD (main)Bug ReportLowissue importing from AutocadAssigned
0%
Task Description

There is an issue importing from Autocad:
lines and quotes (both arrows and text) appear too much big (see attachment).
I can fix quotes modifying dimensions in “current drawing preferences”, but lines are still too thick.
Autocad’s dxf are opened with right line thickness but wrong quotes.
Furthermore, Autocad opens Qcad’s dxf files showing wrong quotes.

482QCAD (main)Bug ReportLowBlock with hatch, scaled with different X / Y factorsAssigned
0%
Task Description

Block with hatch scaled with factor in X different from factor in Y leads to problems if contour contains arcs (which cannot / are not scaled disproportionally).

467QCAD (main)Feature RequestLowFeature request for new Arc tool option to add to Arc s...Assigned
0%
2 Task Description

For and behalf of mandrena

To add another Arc tool option in Arc tools set:

1.Specify Start point for Arc.
2.Specify End point for Arc.
3.Specify “Tangent” direction (without being restricted in input field) so you can visually select a point on your desired Tangent line!

455QCAD (main)Feature RequestLowlogical operations for polylinesAssigned
0%
Task Description

A missing feature in my work are logical operations (combine, intersect, ..) for polylines

Example:
Draw some elements, select them, say combine. The result will be the outline of all elements.

454QCAD (main)Feature RequestLowcombined move/rotate/scale with two reference pointsAssigned
0%
Task Description

It would be extremely helpful, if marked objects could be moved/rotated/scaled in a single step with two reference points as source and two reference poitns as destination. With a tool like this, “should match”-drawings could be merged easily.

426QCAD (main)Feature RequestLowScriptable entitiesAssigned
0%
Task Description

Provide script functionality for entities:

  • Paint or decorate entity, for example based on custom properties assigned to the entity
  • Listen and react to events
408QCAD (main)Feature RequestLowScript Macro recorderAssigned
0%
3 Task Description

Having practically no experience in scripting, a recorder that one could activate to memorize repetitive tasks (ie: inserting several layers with different attributes when starting a new drawing)would a useful tool to help get a start on scripting.

396QCAD (main)Feature RequestLowBlocks: moving blocks: show bounding boxAssigned
0%
Task Description

Blocks: moving complex blocks with drag and drop should show bounding box as preview

384QCAD (main)Feature RequestLowMenu icons under Mac OS XAssigned
0%
Task Description

Make this an option. Default should be no icons since icons are unusual for Mac OS X application menus.

355QCAD (main)Feature RequestLowRemember function for dimension OptionAssigned
0%
Task Description

I think it would be nice to have more flexibility for Prefix etc. option (not only the drop down with a given choice) and a remember function for all those fields like postfix and tolerance.

Why Remember Function:
If I use a postfix like <>” in the postfix field I’m only able to use it for this particular dimension type at this time. If I change the type (from Horizontal to vertical or what ever) I have always to repeat my postfix. The same with tolerances.

316QCAD (main)Feature RequestLowBlocks list and selected blockAssigned
0%
1 Task Description

Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?

(Feature request sounds a little harsh, enhancement proposal would seem more apt.)

293QCAD (main)Feature RequestLowmulti-select for blocksAssigned
0%
Task Description

It would be nice if one could select multiple blocks in the block list at once (holding ctrl or ctrl+shift). Main purpose would be to delete them if they are not needed anymore. If possible, the same applies to layers.

288QCAD (main)Performance IssueLowopening dwg file takes very long [improved]Assigned
50%
Task Description

Opening a 4 MB dwg file results in no-response for about five minutes. Opening the same file with DraftSight takes less than five seconds.

277QCAD (main)Feature RequestLowcommand line arguments: allow class name after -execAssigned
0%
Task Description

command line arguments: allow class name after -exec

275QCAD (main)Feature RequestLowRounding all corners of a polylineAssigned
0%
1 Task Description

Modify - Round - Click polyline - round all corners

269QCAD (main)Bug ReportLowInfo: area: display result in dimension display formatAssigned
0%
Task Description

Info: area: display result in dimension display format

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?p=4810#4810

268QCAD (main)Feature RequestLowDefine grid originAssigned
0%
Task Description

Define grid origin

246QCAD (main)Bug ReportLowFoot drawing unit: value displayAssigned
0%
Task Description

Various issues for grid info, property editor, dimensions, etc.

228QCAD (main)Feature RequestLowInsert current date (and other fields)Assigned
0%
1 Task Description

Insert filed into drawing that displays current date, file name, ...

208QCAD (main)Feature RequestLowSVG export: support custom line weightsAssigned
0%
Task Description

Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594

173QCAD (main)Feature RequestLowexplode text to lettersAssigned
0%
Task Description

implement

154QCAD (main)Feature RequestLowImage: move reference points to scaleAssigned
0%
Task Description

Image: move reference points to scale

137QCAD (main)RefactoringLowSVG Export precisionAssigned
0%
Task Description

In files exported with the (even PG) exporter I sometimes see values like these: 334.99999999999994 or 570.0000000000001 and very often 12 digits of precision.

To safe on file size, I suggest, that QCAD rounds values on SVG export to eg. three places. When viewed in an ordinary web browser, that will result in a precision of 1 inch / 96dpi / 1000 = 0.00026mm, not? Ends should still meet.

116QCAD (main)Feature RequestLowShow polyline area in property editorAssigned
30%
2 Task Description

Show area of closed polyline, hatch, solid fill in property editor.

21QCAD (main)Feature RequestLowAdd line weight scale factorAssigned
0%
Task Description

Required for extreme units such as Nanometers or Kilometers. See also FS#20

12QCAD (main)Feature RequestLowFile Export FormatsAssigned
0%
Task Description

Open

Postponed

  • SQL
  • DGN
  • Google SketchUp
  • Canonical representation of DXF that would allow for meaningful diffs
  • XML representation of DXF

Not Planned

  • EMF/WMF (use SVG instead or use SVG to EMF converter)

Done

  • SVG
  • PDF
1760QCAD (main)Bug ReportVery LowSelf-crossing polylines can't be cut twice at segment c...Assigned
0%
Task Description

Re-entering dividing problem from  FS#1757 

Divide the poly selecting near segment 1 at the segment crossing.
> A new node is inserted on the crossing and made start and end node.
Divide the poly again selecting near segment 2 at the segment crossing.
> no division appears to be done.

One can’t divide the second segment at the crossing

Presumed intended behaviour like  FS#1750 

Regards

1759QCAD (main)SuggestionVery LowModify // .... selection of entities on locked layer al...Assigned
0%
Task Description

Without any selection.
Entities on a locked layer can be selected after choosing:

Asumed wrong
- Modify DI
- Modify
B2
- Modify D3
- Modify
MT

Questionable
- Modify RM
- Modify
CH
- Modify RN Less severe
- Modify
OF
- Modify OH
- Modify
SS

Regards

1751QCAD (main)Bug ReportVery LowCan't open files from terminalWaiting on User
0%
Task Description

I have file /home/test/test.dxf . When i try open file from terminal (qcad test.dxf), i have warning “File not found”. When i write full path (qcad /home/test/test.dxf), the file opens.

1743QCAD (main)Bug ReportVery LowDraw > Text: Wrong bounding box for text with empty sup...Assigned
0%
1 Task Description

Hi,

I have a drawing where I use text with superscript. In this case when I use autozoom, it does not work as I expect. It includes the 0,0 coordinates too. The problem also occures when I export the drawing into svg.

I attached an example, just use the autozoom.

Thanks,
Soma


1719QCAD (main)Bug ReportVery LowUndo on converted drawing leads to wrong label position...Assigned
0%
Task Description

Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.

1692QCAD (main)Bug ReportVery LowIssue with Layouts. "Viewport" enteties are not highlig...Assigned
0%
Task Description

QCad 3.19.2 Professional, 64bit, Linux Mint

Case:
1. Open some drawing with viewport entities on layout block (paper scace). Print Preview mode is “On” automatically.
2. Switch to “Black/White Mode” from toolbar and move cursor on “Viewport” enteties. This entitie is not highlighted. With other enteties all works as expected.
In “Full Color Mode” and “Grayscale Mode” no problems.

For example can try on “flange.dxf”

1691QCAD (main)Bug ReportVery LowIssue with Layouts after "File-Revert"Assigned
0%
Task Description

QCad 3.19.2 Professional, 64bit, Liux Mint

Case:
1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically.
2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .

For example can try on “flange.dxf”

1660QCAD (main)Bug ReportVery LowViewport in Model Space ...Assigned
0%
Task Description

... I have the feeling that wasn’t the idea. I’m correct?

Case:
in Model Space, launch Add Viewport, determine the Viewport rectangle - when done QCAD will switch to a Layout Block.
Now in Layout Block, don’t(!) place the Viewport, switch back to Model Space and the Viewport is still attached to the Mouse pointer and you can place it in your Model Space. The source of the Viewport will then disappear.

1649QCAD (main)Feature RequestVery LowAdd configuarable format options for saving blocks to l...Assigned
0%
Task Description

Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.

1626QCAD (main)Feature RequestVery Low'Clip to Circle' toolAssigned
0%
1 Task Description

Hi Andrew,

Would it be possible to have a clip to circle tool also please?

Regards

Clive

1607QCAD (main)SuggestionVery LowIndent 'Spline Segments:' in explode preferencesAssigned
0%
1 Task Description

 FS#1604  was issued because of non-intuitive hierarchy of the preferences for the Explode function.
The task comment recieved explains the funcionallity in details not found elsewhere.

Indentation of the phrase ‘Spline Segments:’ suggest hierarchy.
Graying out the drop down box for the number of spline segments establish hierarchy.

1587QCAD (main)Bug ReportVery LowPDF export created with wrong date timeAssigned
0%
Task Description

Hi guys,

when I export my dxf drawing to pdf, the pdf properties shows wrong “created date”. I am in UTC+2, the date shows 2 hours less.
I exported the pdf at 12:24, the attached ps shows 10:24.

BR,
Soma

1518QCAD (main)Bug ReportVery LowLandscape/Portrait gets confused for custom page sizeAssigned
0%
Task Description

Hello

In the Print Preview or Drawing Preferences / Page Settings if I select a Custom size, then landscape/portrait does not really make sense.

For instance, at work we have a laser cutter which uses a printer driver. The bed of the laser is 600 wide by 300 high. When I wanted to cut
something, I created a custom page size of 600×300 and selected Landscape (because it is wider than high)

Strangely, back in the Print Preview, the page is now sized opposite with regards to Portrait / Landscape mode, which was confusing somewhat.

(see pictures attached)

I think that for ‘Custom’ page size in Drawing Preferences, the option of Portrait or Landscape should probably be ghosted

Then, I think that for Portrait / Landscape mode in the Print Preview, it should display the shape most appropriate, rather than just assuming that the document fits the norm:

  1. Taller than Wide for Portrait mode
  2. Wider than Tall for Landscape mode
1460QCAD (main)Bug ReportVery LowTwo Display Environment --> Problems with Toolboxes and...Assigned
0%
1 Task Description

Hello,

I’m unsing a two display environment and got all Tools and Widgets placed on the second display.
See qcad1.png

There are two problems:

1.) When I open another application on second display, three toolboxes stay on top, the others are behind new application.
See qcad2.png

2.) When I minimize Qcad only the mainwindow will be minimuzed, all the toolboxes and widgets stay on second display also with problem 1.
See qcad3.png

Whould be great, when this issues will be fixed :-)

Thank you very much
Andreas

P.S.: Hope described well, if not, please drop me a reply...

1443QCAD (main)Bug ReportVery LowView > Status Bar remains uncheckedAssigned
0%
Task Description

Status Bar menu remains unchecked even it is toggled on or off

1426QCAD (main)Feature RequestVery LowLoad drawings that were open when closing QCAD on start...Assigned
0%
Task Description

See also:
http://www.qcad.org/rsforum/viewtopic.php?f=31&t=4249

1424QCAD (main)Bug ReportVery LowEdit > Undo: hatches not selectedAssigned
0%
Task Description

If a hatch is selected, then rotated or scaled and this is undone afterwards, the hatch is not selected anymore.

1375QCAD (main)SuggestionVery LowInstall in hidden folderAssigned
0%
Task Description

After each update, I add a dot before the ~user/opt folder (and in the program launcher) created by QCAD to unclutter my file manager’s appearance. Would be easy, I think, to make the installer put the program directly in ~user/.opt, and nobody would miss that folder while browsing through daily used files.

And what about installing the program as root, so all users of a computer could use it without personal installs, and only personal setting files created by users would be kept in ~user/.opt/qcam.

Jean-Claude

1369QCAD/CAMBug ReportVery Lowqcad-bin is trying to access non-existent /home/andrewAssigned
0%
Task Description

I experience long start delays. I’ve trace the problem to the fact that I have autofs automounting my home directories. However, an strace of qcad-bin shows the following:

execve("/opt/ribbonsoft/qcad/qcad-3.12.6/qcad-bin", ["/opt/ribbonsoft/qcad/qcad-3.12.6"...], [/* 87 vars */]) = 0
brk(NULL)                               = 0x1eca000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fd6194ad000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/tls/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/tls", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/x86_64/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib/x86_64", 0x7fff4722f250) = -1 ENOENT (No such file or directory)
open("/home/andrew/local/qt/lib/libqcadecmaapi.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/home/andrew/local/qt/lib", 0x7fff4722f250) = -1 ENOENT (No such file or directory)

Since there is no “andrew” user here, I have to wait for automount to timeout which takes about 2m and is rather annoying.

1324QCAD/CAMSuggestionVery LowConfusing Copy / Move optionAssigned
0%
Task Description

Hi,

Using the Copy and Move command the [ ] Use current layer and attributes’ is confusing.

Perhaps [ ] change copy /moved set to current layers and attributes. is more suitable.

Showing tasks 301 - 350 of 361 Page 7 of 8<<First - 4 - 5 - 6 - 7 - 8 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing