|
1656 | QCAD (main) | Bug Report | Low | Dimension size scale wrong in viewports | Closed | |
|
Task Description
Dimensions in viewports do not reflect the configured Edit > Application Preferences > Dimension > Dimension Settings > Size scale factor if value != 1.
|
|
1655 | QCAD (main) | Bug Report | Low | File > Print Preview: cannot adjust page preferences fo ... | Closed | |
|
Task Description
Open Drawing Switch to model space File > Print Preview Edit > Drawing Preferences > Printing > Page: change paper size, scale, etc. Preferences cannot be applied to model space
|
|
1652 | QCAD (main) | Bug Report | Low | Insert file as block: block attributes not on correct b ... | Closed | |
|
Task Description
- Insert a block with block attribute definitions from a file (drag and drop or part library) into a new drawing into a layout block or another block that is not the model space block. - Attributes that are created for the attribute definitions end up in model space instead of the correct block.
|
|
1640 | QCAD (main) | Bug Report | Low | Modify > Offset: Tolerance issue when clipping offset c ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=91&t=5089
|
|
1639 | QCAD Community Edition | Bug Report | Low | Layer > Hide all Layers: cannot turn individual layer b ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=76&t=5092
|
|
1634 | QCAD (main) | Bug Report | Low | View > Screen-based Linetypes: arc rendering quality | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5086
|
|
1631 | dxflib | Bug Report | Low | dxflib: wrong definition of DL_POLYLINE3D flag | Closed | |
|
Task Description
DL_POLYLINE3D should be 0×8.
|
|
1630 | QCAD (main) | Bug Report | Low | File > SVG Export: polylines with arc segments with lar ... | Closed | |
|
Task Description
Polylines with arc segments with large radii are not exported correctly due to imprecise QPainterPath::addArc.
|
|
1624 | QCAD (main) | Feature Request | Low | dwg2maptiles: specify single tile to generate | Closed | |
|
Task Description
Add command line argument to generate only one specific tile for a specific zoom level.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5005
|
|
1623 | QCAD (main) | Feature Request | Low | dwg2maptiles: specify single zoom level to generate | Closed | |
|
Task Description
Add command line argument to generate only one specific zoom level or a range of zoom levels.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5005
|
|
1619 | QCAD (main) | Bug Report | Low | Context menu: relocating start point of selected polyli ... | Closed | |
|
Task Description
Select a polyline Right click on it to show context menu Set new position of start point Tool stays active and does not properly terminate
|
|
1618 | QCAD (main) | Bug Report | Low | Modify > Auto Trim: fails when extending (depending on ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4984
|
|
1610 | QCAD/CAM | Performance Issue | Low | Switching from one drawing to another slow | Closed | |
|
Task Description
When switching from one drawing to another, the 3D view is updated which can be slow, especially for drawings with many text entities.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4945
|
|
1609 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences: dimension size scale cannot ... | Closed | |
|
Task Description
Load “Bemassung.dxf” Edit > Drawing Preferences > Dimension > Dimension Settings > Size scale factor: set to 1 Edit > Drawing Preferences > Dimension > Dimension Settings > Size scale factor reverts to 0.5
See: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4926&start=15#p18229
|
|
1600 | QCAD (main) | Bug Report | Low | File > Save As: Only partial information shown for avai ... | Closed | |
|
Task Description
Some Linux distributions only show filter strings up to the first “(” in the file dialog.
|
|
1597 | QCAD (main) | Bug Report | Low | Edit > Convert Drawing Unit: dimension scale override s ... | Closed | |
|
Task Description
Drawing unit conversion sets the dimension scale override property for all dimensions, even if it was 0 before.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4926
|
|
1596 | QCAD (main) | Feature Request | Low | View > Selection Filter: add filter for custom properti... | Assigned | |
3 |
Task Description
See also: https://qcad.org/rsforum/viewtopic.php?f=32&t=4840
|
|
1595 | dxflib | Bug Report | Low | LWPOLYLINE exports Z values for vertices | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=22&t=4925
https://www.autodesk.com/techpubs/autocad/acad2000/dxf/lwpolyline_dxf_06.htm
|
|
1594 | QCAD (main) | Feature Request | Low | Tool matrix: allow reordering of tools | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923
|
|
1593 | QCAD/CAM | Bug Report | Low | CAM > CAM Export: ZH in header always yields default va ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=74&t=4914
|
|
1586 | QCAD (main) | Feature Request | Low | Edit > Application Preferences: Use different color for... | Assigned | |
|
Task Description
Add preference to use a single, configurable color for all locked layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4879#p17953
|
|
1584 | QCAD (main) | Bug Report | Low | Modify > Divide: dividing polyline at node can lead to ... | Closed | |
|
Task Description
- Divide attached polyline at 40,30 - Lower half contains zero length segment at 40,30
|
|
1581 | QCAD (main) | Bug Report | Very Low | View > Selection Filter: no inputs for property Linetyp ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4876
|
|
1580 | QCAD (main) | Bug Report | Low | Hatch origin point not saved / loaded correctly | Closed | |
|
Task Description
Create hatch Set origin point of hatch pattern to custom coordinate Save Load
Hatch offset parameters are unchanged but visual appearance has changed
|
|
1579 | QCAD (main) | Bug Report | Low | Edit > Paste: rotation leads to wrong position of block ... | Closed | |
|
Task Description
Copy block reference in drawing with one unit (e.g. Inch). Paste into drawing with other unit (e.g. Millimeter) using a rotation while pasting.
|
|
1578 | QCAD (main) | Bug Report | Low | Dimension scales with linear factors change after savin ... | Closed | |
|
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?f=107&t=4593&p=17839#p17835
|
|
1566 | QCAD (main) | Bug Report | Low | Block > Attributes > Synchronize Attributes: deleted bl ... | Closed | |
1 |
Task Description
Deleted (undone) block attributes are stored to DXF/DWG.
|
|
1561 | QCAD (main) | Bug Report | Low | Edit > Drawing Preferences: menu missing (macOS, French ... | Closed | |
|
Task Description
Qt menu heuristic causes Edit > Drawing Preferences to disappear with French locale under macOS.
Edit > Application Preferences and Help > About are moved to erroneous locations as well.
|
|
1559 | QCAD (main) | Bug Report | Low | Font substitution in command line tools | Closed | |
|
Task Description
Font substitutions broken for many cases. Font “Standard” can never be substituted.
|
|
1557 | QCAD (main) | Bug Report | Low | Zero length lines not shown | Closed | |
|
Task Description
Zero length lines are not shown in QCAD. For best compatibility these should be shown as dots.
|
|
1554 | QCAD (main) | Bug Report | Low | Auto focus of options toolbar when entering numbers bro ... | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4774
|
|
1553 | QCAD (main) | Bug Report | Low | Modify > Break out Manual: exception with circles | Closed | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4776
|
|
1552 | QCAD (main) | Feature Request | Low | Layers: assign different color for printing | Assigned | |
2 |
Task Description
Original request:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4768
|
|
1550 | QCAD (main) | Bug Report | Low | Block references: mirrored block references in 3rd part ... | Closed | |
|
Task Description
Files imported from other CAD applications might contain blocks that are mirrored if the block reference uses an inverted extrusion direction.
|
|
1549 | QCAD (main) | Feature Request | Low | Separate Coordinate Display from Drawing Dimensions | Assigned | |
|
Task Description
Source: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4752
According to the changelog for version 3.9.3 the info tools and coordinate display are tied to the current drawing dimensions. For much of my use I prefer to have the dimensions format different. The main reason is that my customers want to see the format in fractions, but when I am drawing I’d rather see the decimal format to make sure what I am drawing is accurate. So I’d really be interested in seeing a separate full configuration of the display and info coordinates.
|
|
1542 | dwg2svg | Feature Request | Low | dwg2svg: add switch to show only given layer(s) | Assigned | |
|
Task Description
Implement a command line switch to only show a list of given layers for dwg2* command line tools.
|
|
1541 | QCAD (main) | Feature Request | Low | View > Zoom > Zoom In/Out: Make zoom factor configurabl... | Assigned | |
1 |
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729
|
|
1540 | QCAD (main) | Bug Report | Low | Draw > Line > Parallel: Changing back to Auto has no ef ... | Closed | |
|
Task Description
Draw > Line > Parallel - switch type to Line, XLine or Ray - switch back to Auto - Parallel is always line segment
|
|
1537 | QCAD (main) | Feature Request | Low | Draw > Shape: Add option to fill shape (add solid fill) | Closed | |
|
Task Description
Add an option to create a solid fill hatch for shape tools.
|
|
1524 | QCAD (main) | Bug Report | Low | Command line: cannot enter @ sign in command line on Ge ... | Closed | |
|
Task Description
@ sign cannot be entered into command line on German keyboards on which Alt-Q has to be pressed to enter @.
This is a Qt/Linux bug which interprets Alt-Q as part of a shortcut starting with Q.
Workaround: change shortcut of Reset tool from QQ to something else, not starting with Q.
|
|
1523 | QCAD (main) | Bug Report | Low | Draw > Hatch > Hatch from Segments: fails for circle in ... | Closed | |
|
Task Description
- Draw circle inside other circle - Draw > Hatch > Hatch from Segments - Click both circles - Right-click
|
|
1521 | QCAD (main) | Bug Report | Low | Modify > Offset: fails in certain cases with short arcs | Closed | |
|
Task Description
Offset curve not trimmed / clipped correctly.
Offset distance: 2.5
|
|
1520 | QCAD (main) | Bug Report | Low | Modify > Rotate: rotating splines changes start/end tan ... | Closed | |
|
Task Description
- Create spline from fit points - Rotate spline - Spline shape changes due to erroneous start/end tangents
Similar problem when reversing spline from fit points.
|
|
1519 | QCAD (main) | Bug Report | Low | Ruler precision always zero | Closed | |
|
Task Description
Rulers show only whole numbers.
|
|
1517 | QCAD (main) | Bug Report | Low | Modify > Break out Segment: fails with closed polyline | Closed | |
1 |
Task Description
Occurs when breaking out segment from closed polyline with more than two intersecting entities.
This also affects the hatch from segments tool when used with closed polylines.
Example: https://raw.githubusercontent.com/qcad/qcad/master/scripts/Modify/BreakOut/Tests/data/closed_polyline.dxf
|
|
1514 | QCAD (main) | Bug Report | Low | Block attributes: association with block reference lost ... | Closed | |
|
Task Description
Create block reference with attribute Copy block reference and attribute Paste
The copied attribute is now associated with the first block reference instead of the second.
|
|
1513 | QCAD (main) | Bug Report | Low | Layer > Create Layer from Selection: Layer created, sel ... | Closed | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=33&t=4583
|
|
1509 | QCAD (main) | Bug Report | Low | Ellipse / circle, ellipse / ellipse intersections | Closed | |
|
Task Description
Not all intersections points between ellipses and circles or other ellipses are found. This is due to too tight tolerances.
See: http://www.qcad.org/rsforum/viewtopic.php?f=76&t=4574
|
|
1507 | QCAD (main) | Task | Low | Improve arc rendering for screen-based linetypes | Closed | |
|
Task Description
See: http://www.qcad.org/rsforum/viewtopic.php?f=73&t=4566
|
|
1497 | QCAD (main) | Performance Issue | Low | Autosnap: hangs with very complex splines | Closed | |
|
Task Description
Splines with hundreds of control points or fit points can cause hangs when using auto snap near them.
|